The 50 most-cited articles in Review of Scientific Instruments, 2020

The performance of superconducting circuits for quantum computing is limited by materials losses. In particular, coherence times are typically bounded by two-level system (TLS) losses at single photon powers and millikelvin temperatures. The identification of low loss fabrication techniques, materials, and thin film dielectrics is critical to achieving scalable architectures for superconducting quantum computing. Superconducting microwave resonators provide a convenient qubit proxy for assessing performance and studying TLS loss and other mechanisms relevant to superconducting circuits such as non-equilibrium quasiparticles and magnetic flux vortices. In this review article, we provide an overview of considerations for designing accurate resonator experiments to characterize loss, including applicable types of losses, cryogenic setup, device design, and methods for extracting material and interface losses, summarizing techniques that have been evolving for over two decades. Results from measurements of a wide variety of materials and processes are also summarized. Finally, we…

The transition from old space to new space along with increasing commercialization has a major impact on space flight, in general, and on electric propulsion (EP) by ion thrusters, in particular. Ion thrusters are nowadays used as primary propulsion systems in space. This article describes how these changes related to new space affect various aspects that are important for the development of EP systems. Starting with a historical overview of the development of space flight and of the technology of EP systems, a number of important missions with EP and the underlying technologies are presented. The focus of our discussion is the technology of the radio frequency ion thruster as a prominent member of the gridded ion engine family. Based on this discussion, we give an overview of important research topics such as the search for alternative propellants, the development of reliable neutralizer concepts based on novel insert materials, as well as promising neutralizer-free propulsion concepts. In addition, aspects of thruster modeling and requirements for test facilities are discussed.…

We review the rapid recent progress in single-photon sources based on multiplexing multiple probabilistic photon-creation events. Such multiplexing allows higher single-photon probabilities and lower contamination from higher-order photon states. We study the requirements for multiplexed sources and compare various approaches to multiplexing using different degrees of freedom.

Photonic Doppler Velocimetry (PDV) is a fiber-based diagnostic for the extreme conditions created by high-speed impact, explosive detonation, electrical pulsed power, and intense laser ablation. PDV is a conceptually simple application of the optical Doppler effect, but measurements above 1 km/s only became practical at the beginning of the twenty-first century. This review discusses the evolution of PDV, its operational details, practical analysis, and outstanding challenges.

This paper presents a systematized review of the research on the production of nanosecond high-power pulses using solid-state generators based on an inductive energy store and a semiconductor opening switch that have been performed in the past 25 years. This research has been underway since 1992-1993 when the nanosecond cutoff of ultrahigh-density currents in semiconductor diodes was discovered and named the SOS (Semiconductor Opening Switch) effect. The discovery of the SOS effect provided a breakthrough in the development of semiconductor generators, as their most important characteristics, such as pulse power and output voltage, were increased tens and hundreds of times compared with previously known semiconductor generators. In particular, in the nanosecond semiconductor technology, megavolt voltages combined with gigawatt peak powers have been achieved. This review considers the main physical processes that determine the mechanism of operation of a SOS based on the SOS effect. The principle of operation, design, and characteristics of SOS diodes and SOS generators is described,…

The energy-resolved neutron imaging system, RADEN, has been installed at the pulsed neutron source in the Materials and Life Science Experimental Facility of the Japan Proton Accelerator Research Complex. In addition to conventional neutron radiography and tomography, RADEN, the world's first imaging beam-line at a pulsed neutron source, provides three main options for new, quantitative neutron imaging techniques: Bragg-edge imaging to visualize the spatial distribution of crystallographic information, resonance absorption imaging for elemental composition and temperature information, and polarized neutron imaging for magnetic field information. This paper describes the results of characterization studies of the neutronic performance and installed devices at RADEN and shows the results of several demonstration studies for pulsed neutron imaging.

InGaAs/InP single-photon detectors (SPDs) are widely used for near-infrared photon counting in practical applications. Photon detection efficiency (PDE) is one of the most important parameters for SPD characterization, and therefore, increasing PDE consistently plays a central role in both industrial development and academic research. Here, we present the implementation of high-frequency gating InGaAs/InP SPDs with a PDE as high as 60% at 1550 nm. On one hand, we optimize the structure design and device fabrication of InGaAs/InP single-photon avalanche diodes with an additional dielectric-metal reflection layer to relatively increase the absorption efficiency of incident photons by ∼20%. On the other hand, we develop a monolithic readout circuit of weak avalanche extraction to minimize the parasitic capacitance for the suppression of the afterpulsing effect. With 1.25 GHz sine wave gating and optimized gate amplitude and operation temperature, the SPD is characterized to reach a PDE of 60% with a dark count rate (DCR) of 340 kcps. For practical use, given 3 kcps DCR as a reference,…

Time-resolved photoemission with ultrafast pump and probe pulses is an emerging technique with wide application potential. Real-time recording of nonequilibrium electronic processes, transient states in chemical reactions, or the interplay of electronic and structural dynamics offers fascinating opportunities for future research. Combining valence-band and core-level spectroscopy with photoelectron diffraction for electronic, chemical, and structural analyses requires few 10 fs soft X-ray pulses with some 10 meV spectral resolution, which are currently available at high repetition rate free-electron lasers. We have constructed and optimized a versatile setup commissioned at FLASH/PG2 that combines free-electron laser capabilities together with a multidimensional recording scheme for photoemission studies. We use a full-field imaging momentum microscope with time-of-flight energy recording as the detector for mapping of 3D band structures in (kx, ky, E) parameter space with unprecedented efficiency. Our instrument can image full surface Brillouin zones with up to 7 Å−1 diameter in a…

We report details of an experimental platform implemented at the National Ignition Facility to obtain in situ powder diffraction data from solids dynamically compressed to extreme pressures. Thin samples are sandwiched between tamper layers and ramp compressed using a gradual increase in the drive-laser irradiance. Pressure history in the sample is determined using high-precision velocimetry measurements. Up to two independently timed pulses of x rays are produced at or near the time of peak pressure by laser illumination of thin metal foils. The quasi-monochromatic x-ray pulses have a mean wavelength selectable between 0.6 Å and 1.9 Å depending on the foil material. The diffracted signal is recorded on image plates with a typical 2θ x-ray scattering angle uncertainty of about 0.2° and resolution of about 1°. Analytic expressions are reported for systematic corrections to 2θ due to finite pinhole size and sample offset. A new variant of a nonlinear background subtraction algorithm is described, which has been used to observe diffraction lines at signal-to-background ratios as low as…

Recent progress in laser-based high-repetition rate extreme ultraviolet (EUV) light sources and multidimensional photoelectron spectroscopy enables the build-up of a new generation of time-resolved photoemission experiments. Here, we present a setup for time-resolved momentum microscopy driven by a 1 MHz fs EUV table-top light source optimized for the generation of 26.5 eV photons. The setup provides simultaneous access to the temporal evolution of the photoelectron's kinetic energy and in-plane momentum. We discuss opportunities and limitations of our new experiment based on a series of static and time-resolved measurements on graphene.

The Charge Exchange Recombination Spectroscopy (CXRS) diagnostic has become a routine diagnostic on almost all major high temperature fusion experimental devices. For the optimized stellarator Wendelstein 7-X (W7-X), a highly flexible and extensive CXRS diagnostic has been built to provide high-resolution local measurements of several important plasma parameters using the recently commissioned neutral beam heating. This paper outlines the design specifics of the W7-X CXRS system and gives examples of the initial results obtained, including typical ion temperature profiles for several common heating scenarios, toroidal flow and radial electric field derived from velocity measurements, beam attenuation via beam emission spectra, and normalized impurity density profiles under some typical plasma conditions.

A new endstation to perform operando chemical analysis at solid-liquid interfaces by means of ambient pressure x-ray photoelectron spectroscopy (APXPS) is presented. The endstation is located at the Swiss Light Source and can be attached to the soft x-ray in situ spectroscopy beamline (X07DB) for solid-gas type experiments and to a tender x-ray beamline (PHOENIX I) for solid-liquid interface experiments. The setup consists of three interconnected ultrahigh vacuum chambers: one for sample preparation using surface science techniques, the analysis chamber for APXPS experiments, and an entry-lock chamber for sample transfer across the two pressure regimes. The APXPS chamber is designed to study solid-liquid interfaces stabilized by the dip and pull method. Using a three-electrode setup, the potential difference across the solid-electrolyte interface can be controlled, as is demonstrated here using an Ir(001) electrode dipped and pulled from a 0.1M KOH electrolyte. The new endstation is successfully commissioned and will offer unique opportunities for fundamental studies of phenomena…

Measuring anisotropic thermal conductivity has always been a challenging task in thermal metrology. Although recent developments of pump–probe thermoreflectance techniques such as variable spot sizes, offset pump–probe beams, and elliptical beams have enabled the measurement of anisotropic thermal conductivity, a metal film transducer enabled for the absorption of the modulated pump laser beam and the detection of the thermoreflectance signal. However, the existence of the transducer would cause in-plane heat spreading, suppressing the measurement sensitivity to the in-plane thermal conductivity. In addition, the transducer film also adds complexity to data processing, since it requires careful calibration or fitting to determine extra parameters such as the film thickness and conductivity, and interface conductance between the transducer and the sample. In this work, we discussed the methodology for measuring in-plane thermal conductivity of layered semiconductors and semimetals without any transducer layer. We show that the removal of transducer results in the dominantly large…

Time-of-flight-based momentum microscopy has a growing presence in photoemission studies, as it enables parallel energy- and momentum-resolved acquisition of the full photoelectron distribution. Here, we report table-top extreme ultraviolet time- and angle-resolved photoemission spectroscopy (trARPES) featuring both a hemispherical analyzer and a momentum microscope within the same setup. We present a systematic comparison of the two detection schemes and quantify experimentally relevant parameters, including pump- and probe-induced space-charge effects, detection efficiency, photoelectron count rates, and depth of focus. We highlight the advantages and limitations of both instruments based on exemplary trARPES measurements of bulk WSe2. Our analysis demonstrates the complementary nature of the two spectrometers for time-resolved ARPES experiments. Their combination in a single experimental apparatus allows us to address a broad range of scientific questions with trARPES.

In recent years, due to the strong autonomous learning ability of neural network algorithms, they have been applied for electrical impedance tomography (EIT). Although their imaging accuracy is greatly improved compared with traditional algorithms, generalization for both simulation and experimental data is required to be improved. According to the characteristics of voltage data collected in EIT, a one-dimensional convolutional neural network (1D-CNN) is proposed to solve the inverse problem of image reconstruction. Abundant samples are generated with numerical simulation to improve the edge-preservation of reconstructed images. The TensorFlow-graphics processing unit environment and Adam optimizer are used to train and optimize the network, respectively. The reconstruction results of the new network are compared with the Deep Neural Network (DNN) and 2D-CNN to prove the effectiveness and edge-preservation. The anti-noise and generalization capabilities of the new network are also validated. Furthermore, experiments with the EIT system are carried out to verify the practicability…

We introduce a new approach to positron emission particle tracking based on machine learning algorithms, demonstrating novel methods for particle location, tracking, and trajectory separation. The method allows radioactively labeled particles to be located, in three-dimensional space, with high temporal and spatial resolution, requiring no prior knowledge of the number of tracers within the system and can successfully distinguish multiple particles separated by distances as small as 2 mm. The technique's spatial resolution is observed to be invariant with the number of tracers used, allowing large numbers of particles to be tracked simultaneously, with no loss of data quality.

The Einstein Telescope (ET) is a proposed next-generation, underground gravitational-wave detector to be based in Europe. It will provide about an order of magnitude sensitivity increase with respect to the currently operating detectors and, also extend the observation band targeting frequencies as low as 3 Hz. One of the first decisions that needs to be made is about the future ET site following an in-depth site characterization. Site evaluation and selection is a complicated process, which takes into account science, financial, political, and socio-economic criteria. In this paper, we provide an overview of the site-selection criteria for ET, provide a formalism to evaluate the direct impact of environmental noise on ET sensitivity, and outline the necessary elements of a site-characterization campaign.

O, and serine are produced inside helium nanodroplets using a combination of ionization, mass filtering, collisions with atomic or molecular vapor, and electrostatic extraction, in a specific and novel sequence. The helium droplets are produced in an expansion of cold helium gas through a nozzle into vacuum. The droplets are ionized by electron bombardment and subjected to a mass filter. The ionic and mass-selected helium droplets are then guided through a vacuum chamber filled with atomic or molecular vapor where they collide and "pick up" the vapor. The dopants then agglomerate inside the helium droplets around charge centers to singly charged clusters. Evaporation of the helium droplets is induced by collisions in a helium-filled radio frequency (RF)-hexapole, which liberates the cluster ions from the host droplets. The clusters are analyzed with a time-of-flight mass spectrometer. It is demonstrated that using this sequence, the size distribution of the dopant cluster ions is distinctly narrower compared to ionization after pickup. Likewise, the ion cluster beam is more intense.…

The requirements of ITER neutral beam injectors (1 MeV, 40 A negative deuterium ion current for 1 h) have never been simultaneously attained; therefore, a dedicated Neutral Beam Test Facility (NBTF) was set up at Consorzio RFX (Padova, Italy). The NBTF includes two experiments: SPIDER (Source for the Production of Ions of Deuterium Extracted from Rf plasma), the full-scale prototype of the source of ITER injectors, with a 100 keV accelerator, to investigate and optimize the properties of the ion source; and MITICA, the full-scale prototype of the entire injector, devoted to the issues related to the accelerator, including voltage holding at low gas pressure. The present paper gives an account of the status of the procurements, of the timeline, and of the voltage holding tests and experiments for MITICA. As for SPIDER, the first year of operation is described, regarding the solution of some issues connected with the radiofrequency power, the source operation, and the characterization of the first negative ion beam.

The magnetic sensitivity of Hall-effect sensors made of InAlN/GaN and AlGaN/GaN heterostructures was measured between room temperature and 576 °C. Both devices showed decreasing voltage-scaled magnetic sensitivity at high temperatures, declining from 53 mV/V/T to 8.3 mV/V/T for the InAlN/GaN sample and from 89 mV/V/T to 8.5 mV/V/T for the AlGaN/GaN sample, corresponding to the decreasing electron mobility due to scattering effects at elevated temperatures. Alternatively, current-scaled sensitivities remained stable over the temperature range, only varying by 13.1% from the mean of 26.3 V/A/T and 10.5% from the mean of 60.2 V/A/T for the InAlN/GaN and AlGaN/GaN samples, respectively. This is due to the minimal temperature dependence of the electron sheet density on the 2-dimensional electron gas (2DEG). Both devices showed consistency in their voltage- and current-scaled sensitivity over multiple temperature cycles as well as nearly full recovery when returned to room temperature after thermal cycling. Additionally, an AlGaN/GaN sample held at 576 °C for 12 h also showed nearly full…

A frequency-domain thermoreflectance (FDTR) system with a frequency range of 1 Hz to 75 MHz is presented. The wide bandwidth of pump modulation frequency enables enhanced simultaneous thermophysical property characterization of bulk and thin-film materials. The wide bandwidth FDTR system is demonstrated with simultaneous measurements of in-plane and cross-plane thermal conductivities of sapphire and muscovite mica, thickness and thermal conductivity of gold/titanium thin films, and isotropic thermal conductivity and volumetric heat capacity of lithium niobate and silicon. Thermophysical properties measured with FDTR are compared to literature values or independent measurements for verification. Finally, at low frequencies, a negligible error was achieved in the numerical integration of the heat diffusion equation with a Gauss–Legendre quadrature method solved with 400 integration points and an upper integration limit of 16weff, where weff is the effective pump–probe 1/e2 radius.

The European X-ray Free-Electron Laser Facility in Germany delivers x-ray pulses with femtosecond pulse duration at a repetition rate of up to 4.5 MHz. The free-electron laser radiation is created by the self-amplified spontaneous emission (SASE) process, whose stochastic nature gives rise to shot-to-shot fluctuations in most beam properties, including spectrum, pulse energy, spatial profile, wavefront, and temporal profile. Each spectrum consisting of many spikes varies in width and amplitude that appear differently within the envelope of the SASE spectrum. In order to measure and study the SASE spectrum, the HIgh REsolution hard X-ray single-shot (HIREX) spectrometer was installed in the photon tunnel of the SASE1 undulator beamline. It is based on diamond gratings, bent crystals as a dispersive element, and a MHz-repetition-rate strip detector. It covers a photon energy range of 3 keV-25 keV and a bandwidth of 0.5% of the SASE beam. The SASE spikes are resolved with 0.15 eV separation using the Si 440 reflection, providing a resolving power of 60 000 at a photon energy of 9.3…

We report the design, construction, and operation results of an 18 T 70 mm cold-bore high temperature superconductor (HTS) no-insulation (NI) magnet, which is developed for an axion haloscope experiment. The magnet consists of 44 double-pancake coils wound with multi-width and multi-thickness REBa2Cu3O7−x (RE = rare earth) tapes. Owing to the NI feature, the magnet is highly compact; is 162 mm in outer diameter and 476 mm tall; and provides an environment of 0.22 T2 m3 within the cold-bore target space of 66 mm in diameter and 200 mm in length. After an initial performance test at SuNAM Co. Ltd., the magnet was installed at the Center for Axion and Precision Physics Research (CAPP) of the Institute for Basic Science in Daejeon, South Korea, in August 2017. The magnet has been successfully operating at the CAPP since then, except for maintenance in October 2018. The magnet may represent the first high field HTS user magnet that experienced long-term operation of over one year.

Performing time- and angle-resolved photoemission (tr-ARPES) spectroscopy at high momenta necessitates extreme ultraviolet laser pulses, which are typically produced via high harmonic generation (HHG). Despite recent advances, HHG-based setups still require large pulse energies (from hundreds of μJ to mJ) and their energy resolution is limited to tens of meV. Here, we present a novel 11 eV tr-ARPES setup that generates a flux of 5 × 1010 photons/s and achieves an unprecedented energy resolution of 16 meV. It can be operated at high repetition rates (up to 250 kHz) while using input pulse energies down to 3 µJ. We demonstrate these unique capabilities by simultaneously capturing the energy and momentum resolved dynamics in two well-separated momentum space regions of a charge density wave material ErTe3. This novel setup offers the opportunity to study the non-equilibrium band structure of solids with exceptional energy and time resolutions at high repetition rates.

We present a high energy resolution x-ray spectrometer for the tender x-ray regime (1.6-5.0 keV) that was designed and operated at Stanford Synchrotron Radiation Lightsource. The instrument is developed on a Rowland geometry (500 mm of radius) using cylindrically bent Johansson analyzers and a position sensitive detector. By placing the sample inside the Rowland circle, the spectrometer operates in an energy-dispersive mode with a subnatural line-width energy resolution (∼0.32 eV at 2400 eV), even when an extended incident x-ray beam is used across a wide range of diffraction angles (∼30° to 65°). The spectrometer is enclosed in a vacuum chamber, and a sample chamber with independent ambient conditions is introduced to enable a versatile and fast-access sample environment (e.g., solid/gas/liquid samples, in situ cells, and radioactive materials). The design, capabilities, and performance are presented and discussed.

The presence of metal particles in lubricating oil produced during the wear and tear of mechanical equipment can harm its performance severely if not detected in time. Hence, the detection of such particles is necessary to predict and to prevent disastrous failures of the machines. This paper presents a new non-contact cross-capacitive sensor for the detection of metal particles in the lubricating oil. The sensor can detect each and every metal debris particle in the lubricating oil by monitoring the capacitance peak. The proposed capacitive sensor works on the principle of the Thompson-Lampard theorem. The sensor consists of four cylindrical electrodes with infinitesimal gaps wrapped around a hollow Teflon tube. The sensor has been modeled with finite element simulation software and then fabricated to verify the theory experimentally. Experimental results show that the capacitance value shows a sharp change in its value due to the presence of metal debris in the oil. The output of the sensor is highly precise (±0.82%) and accurate.

We demonstrate a compact magneto-optical trap (MOT) of alkaline-earth atoms using a nanofabricated diffraction grating chip. A single input laser beam, resonant with the broad 1S0 → 1P1 transition of strontium, forms the MOT in combination with three diffracted beams from the grating chip and a magnetic field produced by permanent magnets. A differential pumping tube limits the effect of the heated, effusive source on the background pressure in the trapping region. The system has a total volume of around 2.4 l. With our setup, we have trapped up to 5 × 106 88Sr atoms at a temperature of ∼6 mK, and with a trap lifetime of ∼1 s. Our results will aid the effort to miniaturize quantum technologies based on alkaline-earth atoms.

Here, we present an integrated ultra-high vacuum apparatus-named MBE-Cluster -dedicated to the growth and in situ structural, spectroscopic, and magnetic characterization of complex materials. Molecular Beam Epitaxy (MBE) growth of metal oxides, e.g., manganites, and deposition of the patterned metallic layers can be fabricated and in situ characterized by reflection high-energy electron diffraction, low-energy electron diffraction, Auger electron spectroscopy, x-ray photoemission spectroscopy, and azimuthal longitudinal magneto-optic Kerr effect. The temperature can be controlled in the range from 5 K to 580 K, with the possibility of application of magnetic fields H up to ±7 kOe and electric fields E for voltages up to ±500 V. The MBE-Cluster operates for in-house research as well as user facility in combination with the APE beamlines at Sincrotrone-Trieste and the high harmonic generator facility for time-resolved spectroscopy.

High temperature materials usually serve under extreme conditions. In order to ensure the safety and reliability of industrial application, it is very significant to clarify the microstructural evolution and mechanical properties at high temperature. The in situ experiment combining mechanical tensile testing and heating in the scanning electron microscope (SEM) is a feasible method to study the relationship between the microstructure, mechanical properties, and temperature. However, it was challenging to acquire images of high quality when the temperature exceeded 800 °C due to the effect of thermal electrons and the instability of loading conditions at high temperature. In this study, a mini-tensile apparatus was devised and installed in an ordinary SEM, which can achieve a stable loading of 0-2200 N and obtain high quality images in the temperature range of 1150 °C. A highly efficient heat source with multi-layer thermal insulation was designed to prevent the other parts of the apparatus from being affected by high temperature. A symmetrical tensile structure was developed to…

A 300 keV transmission electron microscope was modified to produce broadband pulsed beams that can be, in principle, between 40 MHz and 12 GHz, corresponding to temporal resolution in the nanosecond to picosecond range without an excitation laser. The key enabling technology is a pair of phase-matched modulating and de-modulating traveling wave metallic comb striplines (pulsers). An initial temporal resolution of 30 ps was achieved with a strobe frequency of 6.0 GHz. The placement of the pulsers, mounted immediately below the gun, allows for preservation of all optical configurations, otherwise available to the unmodified instrument, and therefore makes such a post-modified instrument for dual-use, i.e., both pulsed-beam mode (i.e., stroboscopic time-resolved) and conventional continuous waveform mode. In this article, we describe the elements inserted into the beam path, challenges encountered during integration with an in-service microscope, and early results from an electric-field-driven pump-probe experiment. We conclude with ideas for making this class of instruments broadly…

FIREBIRD-II is a National Science Foundation funded CubeSat mission designed to study the scale size and energy spectrum of relativistic electron microbursts. The mission consists of two identical 1.5 U CubeSats in a low earth polar orbit, each with two solid state detectors that differ only in the size of their geometric factors and fields of view. Having two spacecraft in close orbit allows the scale size of microbursts to be investigated through the intra-spacecraft separation when microbursts are observed simultaneously on each unit. Each detector returns high cadence (10 s of ms) measurements of the electron population from 200 keV to >1 MeV across six energy channels. The energy channels were selected to fill a gap in the observations of the Heavy Ion Large Telescope instrument on the Solar, Anomalous, and Magnetospheric Particle Explorer. FIREBIRD-II has been in orbit for 5 years and continues to return high quality data. After the first month in orbit, the spacecraft had separated beyond the expected scale size of microbursts, so the focus has shifted toward conjunctions…

We describe the design, construction, and performance of an ultra-high vacuum (UHV) scanning tunneling microscope (STM) capable of imaging at dilution-refrigerator temperatures and equipped with a vector magnet. The primary objective of our design is to achieve a high level of modularity by partitioning the STM system into a set of easily separable, interchangeable components. This naturally segregates the UHV needs of STM instrumentation from the typically non-UHV construction of a dilution refrigerator, facilitating the usage of non-UHV materials while maintaining a fully bakeable UHV chamber that houses the STM. The modular design also permits speedy removal of the microscope head from the rest of the system, allowing for repairs, modifications, and even replacement of the entire microscope head to be made at any time without warming the cryostat or compromising the vacuum. Without using cryogenic filters, we measured an electron temperature of 184 mK on a superconducting Al(100) single crystal.

Monolithic, millimeter-wave "system-on-chip" (SoC) technology has been employed in heterodyne receiver integrated circuit radiometers in a newly developed Electron Cyclotron Emission Imaging (ECEI) system on the DIII-D tokamak for 2D electron temperature profile and fluctuation evolution diagnostics. A prototype module operating in the E-band (72 GHz-80 GHz) was first employed in a 2 × 10 element array that demonstrated significant improvements over the previous quasi-optical Schottky diode mixer arrays during the 2018 operational campaign of the DIII-D tokamak. For compatibility with International Thermonuclear Experimental Reactor relevant scenarios on DIII-D, the SoC ECEI system was upgraded with 20 horn-waveguide receiver modules. Each individual module contains a University of California Davis designed W-band (75 GHz-110 GHz) receiver die that integrates a broadband low noise amplifier, a double balanced down-converting mixer, and a ×4 multiplier on the local oscillator (LO) chain. A ×2 multiplier and two IF amplifiers are packaged and selected to further boost the signal…

We describe a new tunable diode laser (TDL) absorption instrument, the Chicago Water Isotope Spectrometer, designed for measurements of vapor-phase water isotopologues in conditions characteristic of the upper troposphere [190–235 K temperature and 2–500 parts per million volume (ppmv) water vapor]. The instrument is primarily targeted for measuring the evolving ratio of HDO/H2O during experiments in the “Aerosol Interaction and Dynamics in the Atmosphere” (AIDA) cloud chamber. The spectrometer scans absorption lines of both H2O and HDO near the 2.64 µm wavelength in a single current sweep, increasing the accuracy of isotopic ratio measurements. At AIDA, the instrument is configured with a 256-m path length White cell for in situ measurements, and effective sensitivity can be augmented by enhancing the HDO content of chamber water vapor by an order of magnitude. The instrument has participated to date in the 2012–2013 IsoCloud campaigns studying isotopic partitioning during the formation of cirrus clouds and in the AquaVIT-II instrument intercomparison campaign. Realized precisions…

We report on the design, construction, and characterization of a 10 m-long high-performance magnetic shield for very long baseline atom interferometry. We achieve residual fields below 4 nT and longitudinal inhomogeneities below 2.5 nT/m over 8 m along the longitudinal direction. Our modular design can be extended to longer baselines without compromising the shielding performance. Such a setup constrains biases associated with magnetic field gradients to the sub-pm/s2 level in atomic matterwave accelerometry with rubidium atoms and paves the way toward tests of the universality of free fall with atomic test masses beyond the 10−13 level.

We describe an optical pump/probe system for sensitive measurements of time-resolved optical measurements of material dynamics. The instrument design is optimized for time-resolved magneto-optic Kerr effect (TR-MOKE) measurements of dynamics in magnetic materials. The system also allows for time-domain thermoreflectance (TDTR) measurements of thermal transport properties and picosecond acoustic measurements of film thickness and/or elastic constants. The system has several advantages over the conventional designs for TR-MOKE and/or TDTR systems. Measurements of pump-induced changes to the probe beam intensity are shot-noise limited. The system's design allows for MOKE and/or thermoreflectance measurements of both sides of a sample. Pumping and probing the sample on opposite sides allows nanoscale flash diffusivity measurements of transport properties. The wavelengths of the pump and probe beams are straightforward to tune between 350-525 nm and 690-1050 nm. A tunable wavelength allows for optical resonances in a wide array of materials to be excited and/or probed. Finally, the setup…

Time-Correlated Single Photon Counting (TCSPC) and time tagging of individual photon detections are powerful tools in many quantum optical experiments and other areas of applied physics. Using TCSPC, e.g., for the purpose of fluorescence lifetime measurements, is often limited in speed due to dead-time losses and pileup. We show that this limitation can be lifted by reducing the dead-time of the timing electronics to the absolute minimum imposed by the speed of the detector signals while maintaining high temporal resolution. A complementing approach to speedy data acquisition is parallelization by means of simultaneous readout of many detector channels. This puts high demands on the data throughput of the TCSPC system, especially in time tagging of individual photon arrivals. Here, we present a new design approach, supporting up to 16 input channels, an extremely short dead-time of 650 ps, very high time tagging throughput, and a timing resolution of 80 ps. In order to facilitate remote synchronization of multiple such instruments with highest precision, the new TCSPC electronics…

The advent of a large-volume high-pressure apparatus has led to the discovery of many new materials with exceptional properties for widespread applications such as superhard materials (e.g., diamonds). However, for most conventional devices, the pressure and temperature capabilities are often limited to 6 GPa and 2300 K, which severely impedes the study of materials at extended pressures and temperatures. In this work, we present experimental optimizations of the high-pressure cell assembly for cubic press with a focus on the improvement of its temperature capability, leading to a record temperature value of ∼4050 K and largely extended pressure conditions up to ∼10 GPa with a centimeter-sized sample volume. Pressures of the new assembly at high temperatures are investigated by the melting-point method, giving rise to a series of parallel isoforce loading lines associated with thermally induced pressure. For the first time, the high-pressure melting curve of tungsten carbide is determined up to 3800 K and 8 GPa, and single-crystal refractory materials of Mo, Ta, and WC are also…

We report on the development, implementation, and characterization of digital controllers for laser frequency stabilization as well as intensity stabilization and control. Our design is based on the STEMlab (originally Red Pitaya) platform. The presented analog hardware interfaces provide all necessary functionalities for the designated applications and can be integrated in standard 19-in. rack mount units. Printed circuit board layouts are made available as an open-source project (T. Preuschoff et al., https://github.com/TU-Darmstadt-APQ/RedPitaya-Lockbox, 2020 and T. Preuschoff et al., https://github.com/TU-Darmstadt-APQ/RedPitaya-IntStab, 2020). A detailed characterization shows that the bandwidth (1.25 MHz) and the noise performance of the controllers are limited by the STEMlab system and not affected by the supplementary hardware. Frequency stabilization of a diode laser system resulting in a linewidth of 52(1) kHz (FWHM) is demonstrated. Intensity control to the 1 × 10−3 level with sub-microsecond rise and fall times based on an acousto-optic modulator as actuator is achieved.

In Laser Powder Bed Fusion (LPBF), the highly localized energy input by the laser leads to high-temperature gradients. Combined with the inherent cycles of re-melting and solidification of the material, they can result in high mechanical stresses. These stresses can cause distortion and cracking within the component. In situ diffraction experiments with high-energy synchrotron radiation allow an analysis of the lattice spacing during the LPBF process and provide insight into the dynamics of stress generation and texture evolution. In this work, an LPBF system for the purpose of synchrotron x-ray diffraction experiments during the manufacturing process of multi-layer components with simple geometries is described. Moreover, results from diffraction experiments at the HEMS beamline P07 at PETRA III, DESY, Hamburg, Germany, are presented. Components with a length of ls = 20 mm and a width of ws = 2.5 mm consisting of 100 layers with a layer thickness of Δz = 50 µm were produced using the nickel-base alloy Inconel 625 as the powder material. Diffraction experiments were carried out in…

The mental state of a driver can be accurately and reliably evaluated by detecting the driver's electroencephalogram (EEG) signals. However, traditional machine learning and deep learning methods focus on the single electrode feature analysis and ignore the functional connection of the brain. In addition, the recent brain function connection network method needs to manually extract substantial brain network features, which results in cumbersome operation. For this reason, this paper introduces graph convolution combined with brain function connection theory into the study of mental fatigue and proposes a method for driving fatigue detection based on the partial directed coherence graph convolutional neural network (PDC-GCNN), which can analyze the characteristics of single electrodes while automatically extracting the topological features of the brain network. We designed a fatigue driving simulation experiment and collected the EEG signals. In the present work, the PDC method constructs the adjacency matrix to describe the relationship between EEG channels, and the GCNN combines…

Dynamic Nuclear Polarization (DNP) is a powerful suite of techniques that deliver multifold signal enhancements in nuclear magnetic resonance (NMR) and MRI. The generated athermal spin states can also be exploited for quantum sensing and as probes for many-body physics. Typical DNP methods require the use of cryogens, large magnetic fields, and high power microwave excitation, which are expensive and unwieldy. Nanodiamond particles, rich in Nitrogen-Vacancy (NV) centers, have attracted attention as alternative DNP agents because they can potentially be optically hyperpolarized at room temperature. Here, unraveling new physics underlying an optical DNP mechanism first introduced by Ajoy et al. [Sci. Adv. 4, eaar5492 (2018)], we report the realization of a miniature “optical nanodiamond hyperpolarizer,” where 13C nuclei within the diamond particles are hyperpolarized via the NV centers. The device occupies a compact footprint and operates at room temperature. Instrumental requirements are very modest: low polarizing fields, low optical and microwave irradiation powers, and convenient…

Natural Gas Hydrate (NGH) develops and exists in pores of soil sediments under deep seabed and permafrost regions. A cavitation jet is an efficient method of rock breaking, especially for soft hydrate sediment erosion. This paper presents an experimental apparatus that was developed to synthesize NGH and hydrate-bearing sediments and analyze the drilling efficiency of the cavitation jet. The visualization study of fluid flow and breaking mechanism can be conducted over a temperature range varying from -20 °C to 100 °C and up to a maximum confining pressure of 20 MPa. This apparatus is mainly composed of the pressure control and injection system, the cooling system, the cavitation system, and the reaction vessels into which the lab-fabricated temperature/pressure/resistivity sensor probe is inserted. The basic principles of this apparatus are discussed, and a series of experiments were performed to verify that the cavitating jet can be practically applied in the exploitation of NGH reservoirs.

Since the revolution in solid state electronics, many innovative principles were investigated for a better and simpler design. Thus, Hall effect-based sensors and instruments gained importance. To employ this principle in several operating conditions and with different setups, several researchers contributed significantly over the decades, which ultimately led to the establishment of industries producing a wide range of Hall devices. The objective of this paper is to review the available configurations and current status of the Hall effect-based technologies. A detailed discussion is carried out on the various types of existing Hall-based devices, such as linear sensors, field-programmable sensors, switches, latches, speed and directional sensors, and vane sensors. The effect of materials and the influence of several undesired effects (such as offset voltage, temperature, noise, and drift) are also investigated. The compensation/reduction techniques are mentioned therein, and interested researchers are encouraged for the development of new techniques. This paper concludes with the…

We present an approach to determine the absolute thickness profile of flat liquid jets, which takes advantage of the information of thin film interference combined with light absorption, both captured in a single microscopic image. The feasibility of the proposed method is demonstrated on our compact experimental setup used to generate micrometer thin, free-flowing liquid jet sheets upon collision of two identical laminar cylindrical jets. Stable operation was achieved over several hours of the flat jet in vacuum (10−4 mbar), making the system ideally suitable for soft x-ray photon spectroscopy of liquid solutions. We characterize the flat jet size and thickness generated with two solvents, water and ethanol, employing different flow rates and nozzles of variable sizes. Our results show that a gradient of thickness ranging from a minimal thickness of 2 µm to over 10 µm can be found within the jet surface area. This enables the tunability of the sample thickness in situ, allowing the optimization of the transmitted photon flux for the chosen photon energy and sample. We demonstrate…

The development from single shot basic laser plasma interaction research toward experiments in which repetition rated laser-driven ion sources can be applied requires technological improvements. For example, in the case of radio-biological experiments, irradiation duration and reproducible controlled conditions are important for performing studies with a large number of samples. We present important technological advancements of recent years at the ATLAS 300 laser in Garching near Munich since our last radiation biology experiment. Improvements range from target positioning over proton transport and diagnostics to specimen handling. Exemplarily, we show the current capabilities by performing an application oriented experiment employing the zebrafish embryo model as a living vertebrate organism for laser-driven proton irradiation. The size, intensity, and energy of the laser-driven proton bunches resulted in evaluable partial body changes in the small (<1 mm) embryos, confirming the feasibility of the experimental system. The outcomes of this first study show both the appropriateness…

A Mach-Zehnder interferometer for measurement of temperature is proposed and experimentally demonstrated, which consists of two sections of single mode fiber (SMF) and a section of thin core fiber spliced between the two SMFs. The two welding areas are heated and stretched to improve the split and recombination of light. The wavelength of the resonant dip will shift when temperature varies due to the thermo-optic and thermal expansion effect. The experimental results show that a temperature sensitivity of 65 pm/°C with a linear correlation coefficient of 0.996 can be achieved in a temperature range from 25 °C to 80 °C. Due to its ease of manufacture, low cost, and high sensitivity, the fiber optic temperature sensor is suitable for temperature measurement applications.

A hybrid Genetic Algorithm (GA) and Levenberg-Marquardt (GA-LM) method is proposed for cell suspension measurement with electrical impedance spectroscopy. This algorithm combines the GA with global search ability and Levenberg-Marquardt (LM) algorithm with local search ability, which has the advantages of high accuracy and high robustness. First, GA-LM is compared with GA and LM algorithm separately by ideal simulation. Second, Gaussian noise is added to the ideal simulation data. The anti-noise ability of the GA-LM is discussed. Finally, experiments are conducted to verify the practicability of the proposed GA-LM method. In the experiment, GA-LM is used to fit the impedance spectrum of yeast suspensions with different volume fractions and active states. The results show that the GA-LM algorithm can converge to the real value that is set in the simulation under ideal numerical simulation conditions. In the simulation within 2% noise level, the mean relative error of the parameter solution is less than 4%, and the root mean square error of the fitting is less than 0.4. This method…

In this paper, a modular and open micro X-ray Computed Tomography (μXRCT) system is presented, which was set up during the last years at the Institute of Applied Mechanics (CE) of the University of Stuttgart and earlier at the Institute of Computational Engineering of Ruhr-University Bochum. The system is characterized by its intrinsic flexibility resulting from the modular and open design on each level and the opportunity to implement advanced experimental in situ setups. On the one hand, the presented work is intended to support researchers interested in setting up an experimental XRCT system for the microstructural characterization of materials. On the other hand, it aims to support scientists confronted with the decision to set up a system on their own or to buy a commercial scanner. In addition to the presentation of the various hardware components and the applied modular software concept, the technical opportunities of the open and modular hard- and software design are demonstrated by implementing a simple and reliable method for the compensation of bad detector pixels to…

Research in new quantum materials requires multi-mode measurements spanning length scales, correlations of atomic-scale variables with a macroscopic function, and spectroscopic energy resolution obtainable only at millikelvin temperatures, typically in a dilution refrigerator. In this article, we describe a multi-mode instrument achieving a μeV tunneling resolution with in-operando measurement capabilities of scanning tunneling microscopy, atomic force microscopy, and magnetotransport inside a dilution refrigerator operating at 10 mK. We describe the system in detail including a new scanning probe microscope module design and sample and tip transport systems, along with wiring, radio-frequency filtering, and electronics. Extensive benchmarking measurements were performed using superconductor-insulator-superconductor tunnel junctions, with Josephson tunneling as a noise metering detector. After extensive testing and optimization, we have achieved less than 8 μeV instrument resolving capability for tunneling spectroscopy, which is 5-10 times better than previous instrument reports and…