The 100 most-cited articles in Journal of the American Chemical Society, 2016

Despite the remarkable rise in efficiencies of solar cells containing the lead-halide perovskite absorbers RPbX3 (R = organic cation; X = Br(-) or I(-)), the toxicity of lead remains a concern for the large-scale implementation of this technology. This has spurred the search for lead-free materials with similar optoelectronic properties. Here, we use the double-perovskite structure to incorporate nontoxic Bi(3+) into the perovskite lattice in Cs2AgBiBr6 (1). The solid shows a long room-temperature fundamental photoluminescence (PL) lifetime of ca. 660 ns, which is very encouraging for photovoltaic applications. Comparison between single-crystal and powder PL decay curves of 1 suggests inherently high defect tolerance. The material has an indirect bandgap of 1.95 eV, suited for a tandem solar cell. Furthermore, 1 is significantly more heat and moisture stable compared to (MA)PbI3. The extremely promising optical and physical properties of 1 shown here motivate further exploration of both inorganic and hybrid halide double perovskites for photovoltaics and other optoelectronics.

Rechargeable aqueous Zn-ion batteries are attractive cheap, safe and green energy storage technologies but are bottlenecked by limitation in high-capacity cathode and compatible electrolyte to achieve satisfactory cyclability. Here we report the application of nonstoichiometric ZnMn 2 O 4 /carbon composite as a new Zn-insertion cathode material in aqueous Zn(CF 3 SO 3 ) 2 electrolyte. In 3 M Zn(CF 3 SO 3 ) 2 solution that enables ∼100% Zn plating/stripping efficiency with long-term stability and suppresses Mn dissolution, the spinel/carbon hybrid exhibits a reversible capacity of 150 mAh g –1 and a capacity retention of 94% over 500 cycles at a high rate of 500 mA g –1 . The remarkable electrode performance results from the facile charge transfer and Zn insertion in the structurally robust spinel featuring small particle size and abundant cation vacancies, as evidenced by combined electrochemical measurements, XRD, Raman, synchrotron X-ray absorption spectroscopy, FTIR, and NMR analysis. The results would enlighten and promote the use of cation-defective spinel compounds and…

Understanding the origin of high activity of Fe-N-C electrocatalysts in oxygen reduction reaction (ORR) is critical but still challenging for developing efficient sustainable nonprecious metal catalysts in fuel cells and metal-air batteries. Herein, we developed a new highly active Fe-N-C ORR catalyst containing Fe-N(x) coordination sites and Fe/Fe3C nanocrystals (Fe@C-FeNC), and revealed the origin of its activity by intensively investigating the composition and the structure of the catalyst and their correlations with the electrochemical performance. The detailed analyses unambiguously confirmed the coexistence of Fe/Fe3C nanocrystals and Fe-N(x) in the best catalyst. A series of designed experiments disclosed that (1) N-doped carbon substrate, Fe/Fe3C nanocrystals or Fe-N(x) themselves did not deliver the high activity; (2) the catalysts with both Fe/Fe3C nanocrystals and Fe-N(x) exhibited the high activity; (3) the higher content of Fe-N(x) gave the higher activity; (4) the removal of Fe/Fe3C nanocrystals severely degraded the activity; (5) the blocking of Fe-N(x) downgraded the…

Antibiotics and organic explosives are among the main organic pollutants in wastewater; their detection and removal are quite important but challenging. As a new class of porous materials, metal-organic frameworks (MOFs) are considered as a promising platform for the sensing and adsorption applications. In this work, guided by a topological design approach, two stable isostructural Zr(IV)-based MOFs, Zr6O4(OH)8(H2O)4(CTTA)8/3 (BUT-12, H3CTTA = 5'-(4-carboxyphenyl)-2',4',6'-trimethyl-[1,1':3',1″-terphenyl]-4,4″-dicarboxylic acid) and Zr6O4(OH)8(H2O)4(TTNA)8/3 (BUT-13, H3TTNA = 6,6',6″-(2,4,6-trimethylbenzene-1,3,5-triyl)tris(2-naphthoic acid)) with the the-a topological structure constructed by D4h 8-connected Zr6 clusters and D3h 3-connected linkers were designed and synthesized. The two MOFs are highly porous with the Brunauer-Emmett-Teller surface area of 3387 and 3948 m(2) g(-1), respectively. Particularly, BUT-13 features one of the most porous water-stable MOFs reported so far. Interestingly, these MOFs represent excellent fluorescent properties, which can be efficiently…

Metal halide perovskites have rapidly advanced thin-film photovoltaic performance; as a result, the materials' observed instabilities urgently require a solution. Using density functional theory (DFT), we show that a low energy of formation, exacerbated in the presence of humidity, explains the propensity of perovskites to decompose back into their precursors. We find, also using DFT, that intercalation of phenylethylammonium between perovskite layers introduces quantitatively appreciable van der Waals interactions. These drive an increased formation energy and should therefore improve material stability. Here we report reduced-dimensionality (quasi-2D) perovskite films that exhibit improved stability while retaining the high performance of conventional three-dimensional perovskites. Continuous tuning of the dimensionality, as assessed using photophysical studies, is achieved by the choice of stoichiometry in materials synthesis. We achieve the first certified hysteresis-free solar power conversion in a planar perovskite solar cell, obtaining a 15.3% certified PCE, and observe…

Heavy metal ions are highly toxic and widely spread as environmental pollutants. New strategies are being developed to simultaneously detect and remove these toxic ions. Herein, we take the intrinsic advantage of covalent organic frameworks (COFs) and develop fluorescent COFs for sensing applications. As a proof-of-concept, a thioether-functionalized COF material, COF-LZU8, was "bottom-up" integrated with multifunctionality for the selective detection and facile removal of mercury(II): the π-conjugated framework as the signal transducer, the evenly and densely distributed thioether groups as the Hg(2+) receptor, the regular pores facilitating the real-time detection and mass transfer, together with the robust COF structure for recycle use. The excellent sensing performance of COF-LZU8 was achieved in terms of high sensitivity, excellent selectivity, easy visibility, and real-time response. Meanwhile, the efficient removal of Hg(2+) from water and the recycling of COF-LZU8 offers the possibility for practical applications. In addition, X-ray photoelectron spectroscopy and solid-state…

Molybdenum disulfide (MoS2) is a promising nonprecious catalyst for the hydrogen evolution reaction (HER) that has been extensively studied due to its excellent performance, but the lack of understanding of the factors that impact its catalytic activity hinders further design and enhancement of MoS2-based electrocatalysts. Here, by using novel porous (holey) metallic 1T phase MoS2 nanosheets synthesized by a liquid-ammonia-assisted lithiation route, we systematically investigated the contributions of crystal structure (phase), edges, and sulfur vacancies (S-vacancies) to the catalytic activity toward HER from five representative MoS2 nanosheet samples, including 2H and 1T phase, porous 2H and 1T phase, and sulfur-compensated porous 2H phase. Superior HER catalytic activity was achieved in the porous 1T phase MoS2 nanosheets that have even more edges and S-vacancies than conventional 1T phase MoS2. A comparative study revealed that the phase serves as the key role in determining the HER performance, as 1T phase MoS2 always outperforms the corresponding 2H phase MoS2 samples, and that…

Reducing carbon dioxide to hydrocarbon fuel with solar energy is significant for high-density solar energy storage and carbon balance. In this work, single atoms of palladium and platinum supported on graphitic carbon nitride (g-C3N4), i.e., Pd/g-C3N4 and Pt/g-C3N4, respectively, acting as photocatalysts for CO2 reduction were investigated by density functional theory calculations for the first time. During CO2 reduction, the individual metal atoms function as the active sites, while g-C3N4 provides the source of hydrogen (H*) from the hydrogen evolution reaction. The complete, as-designed photocatalysts exhibit excellent activity in CO2 reduction. HCOOH is the preferred product of CO2 reduction on the Pd/g-C3N4 catalyst with a rate-determining barrier of 0.66 eV, while the Pt/g-C3N4 catalyst prefers to reduce CO2 to CH4 with a rate-determining barrier of 1.16 eV. In addition, deposition of atom catalysts on g-C3N4 significantly enhances the visible-light absorption, rendering them ideal for visible-light reduction of CO2. Our findings open a new avenue of CO2 reduction for…

Mixed Ni-Fe oxides are attractive anode catalysts for efficient water splitting in solar fuels reactors. Because of conflicting past reports, the catalytically active metal redox state of the catalyst has remained under debate. Here, we report an in operando quantitative deconvolution of the charge injected into the nanostructured Ni-Fe oxyhydroxide OER catalysts or into reaction product molecules. To achieve this, we explore the oxygen evolution reaction dynamics and the individual faradaic charge efficiencies using operando differential electrochemical mass spectrometry (DEMS). We further use X-ray absorption spectroscopy (XAS) under OER conditions at the Ni and Fe K-edges of the electrocatalysts to evaluate oxidation states and local atomic structure motifs. DEMS and XAS data consistently reveal that up to 75% of the Ni centers increase their oxidation state from +2 to +3, while up to 25% arrive in the +4 state for the NiOOH catalyst under OER catalysis. The Fe centers consistently remain in the +3 state, regardless of potential and composition. For mixed Ni100-xFex catalysts,…

Modern development of chemical manufacturing requires a substantial reduction in energy consumption and catalyst cost. Sunlight-driven chemical transformation by metal oxides holds great promise for this goal; however, it remains a grand challenge to efficiently couple solar energy into many catalytic reactions. Here we report that defect engineering on oxide catalyst can serve as a versatile approach to bridge light harvesting with surface reactions by ensuring species chemisorption. The chemisorption not only spatially enables the transfer of photoexcited electrons to reaction species, but also alters the form of active species to lower the photon energy requirement for reactions. In a proof of concept, oxygen molecules are activated into superoxide radicals on defect-rich tungsten oxide through visible-near-infrared illumination to trigger organic aerobic couplings of amines to corresponding imines. The excellent efficiency and durability for such a highly important process in chemical transformation can otherwise be virtually impossible to attain by counterpart materials.

Hydrogen evolution reaction (HER) is a critical process due to its fundamental role in electrocatalysis. Practically, the development of high-performance electrocatalysts for HER in alkaline media is of great importance for the conversion of renewable energy to hydrogen fuel via photoelectrochemical water splitting. However, both mechanistic exploration and materials development for HER under alkaline conditions are very limited. Precious Pt metal, which still serves as the state-of-the-art catalyst for HER, is unable to guarantee a sustainable hydrogen supply. Here we report an anomalously structured Ru catalyst that shows 2.5 times higher hydrogen generation rate than Pt and is among the most active HER electrocatalysts yet reported in alkaline solutions. The identification of new face-centered cubic crystallographic structure of Ru nanoparticles was investigated by high-resolution transmission electron microscopy imaging, and its formation mechanism was revealed by spectroscopic characterization and theoretical analysis. For the first time, it is found that the Ru nanocatalyst…

This Perspective illustrates the defining characteristics of free radical chemistry, beginning with its rich and storied history. Studies from our laboratory are discussed along with recent developments emanating from others in this burgeoning area. The practicality and chemoselectivity of radical reactions enable rapid access to molecules of relevance to drug discovery, agrochemistry, material science, and other disciplines. Thus, these reactive intermediates possess inherent translational potential, as they can be widely used to expedite scientific endeavors for the betterment of humankind.

The research field on perovskite solar cells (PSCs) is seeing frequent record breaking in the power conversion efficiency (PCE). However, organic-inorganic hybrid halide perovskites and organic additives in common hole-transport materials (HTMs) exhibit poor stability against moisture and heat. Here we report the successful fabrication of all-inorganic PSCs without any labile or expensive organic components. The entire fabrication process can be operated in ambient environment without humidity control (e.g., a glovebox). Even without encapsulation, the all-inorganic PSCs present no performance degradation in humid air (90-95% relative humidity, 25 °C) for over 3 months (2640 h) and can endure extreme temperatures (100 and -22 °C). Moreover, by elimination of expensive HTMs and noble-metal electrodes, the cost was significantly reduced. The highest PCE of the first-generation all-inorganic PSCs reached 6.7%. This study opens the door for next-generation PSCs with long-term stability under harsh conditions, making practical application of PSCs a real possibility.

Single-molecule magnets (SMMs) with a large spin reversal barrier have been recognized to exhibit slow magnetic relaxation that can lead to a magnetic hysteresis loop. Synthesis of highly stable SMMs with both large energy barriers and significantly slow relaxation times is challenging. Here, we report two highly stable and neutral Dy(III) classical coordination compounds with pentagonal bipyramidal local geometry that exhibit SMM behavior. Weak intermolecular interactions in the undiluted single crystals are first observed for mononuclear lanthanide SMMs by micro-SQUID measurements. The investigation of magnetic relaxation reveals the thermally activated quantum tunneling of magnetization through the third excited Kramers doublet, owing to the increased axial magnetic anisotropy and weaker transverse magnetic anisotropy. As a result, pronounced magnetic hysteresis loops up to 14 K are observed, and the effective energy barrier (Ueff = 1025 K) for relaxation of magnetization reached a breakthrough among the SMMs.

A cross-linked polymer containing pendant molecules attached to the polymer framework is shown to form flexible and low-cost membranes, to be a solid Li(+) electrolyte up to 270 °C, much higher than those based on poly(ethylene oxide), to be wetted by a metallic lithium anode, and to be not decomposed by the metallic anode if the anions of the salt are blocked by a ceramic electrolyte in a polymer/ceramic membrane/polymer sandwich electrolyte (PCPSE). In this sandwich architecture, the double-layer electric field at the Li/polymer interface is reduced due to the blocked salt anion transfer. The polymer layer adheres/wets the lithium metal surface and makes the Li-ion flux at the interface more homogeneous. This structure integrates the advantages of the ceramic and polymer. With the PCPSE, all-solid-state Li/LiFePO4 cells showed a notably high Coulombic efficiency of 99.8-100% over 640 cycles.

Conventional water electrolyzers produce H 2 and O 2 simultaneously, such that additional gas separation steps are needed to prevent H 2 /O 2 mixing. The sluggish anodic O 2 evolution reaction (OER) always results in low overall energy conversion efficiency and the product of OER, O 2, is not of significant value. In addition, the potential formation of reactive oxygen species (ROS) may lead to degradation of cell membranes and thus premature device failure. Herein we report a general concept of integrating oxidative biomass upgrading reactions with decoupled H 2 generation from water splitting. Five representative biomass substrates, ethanol, benzyl alcohol, furfural, furfuryl alcohol, and 5-hydroxymethylfurfural (HMF), were selected for oxidative upgrading catalyzed by a hierarchically porous Ni 3 S 2 /Ni foam bifunctional electrocatalyst (Ni 3 S 2 /NF). All the five organics can be oxidized to value-added liquid products at much lower overpotentials than that of OER. In particular, the electrocatalytic oxidation of HMF to the value-added 2,5-furandicarboxylic acid (FDCA) was…

Metal halide perovskite crystal structures have emerged as a class of optoelectronic materials, which combine the ease of solution processability with excellent optical absorption and emission qualities. Restricting the physical dimensions of the perovskite crystallites to a few nanometers can also unlock spatial confinement effects, which allow large spectral tunability and high luminescence quantum yields at low excitation densities. However, the most promising perovskite structures rely on lead as a cationic species, thereby hindering commercial application. The replacement of lead with nontoxic alternatives such as tin has been demonstrated in bulk films, but not in spatially confined nanocrystals. Here, we synthesize CsSnX3 (X = Cl, Cl0.5Br0.5, Br, Br0.5I0.5, I) perovskite nanocrystals and provide evidence of their spectral tunability through both quantum confinement effects and control of the anionic composition. We show that luminescence from Sn-based perovskite nanocrystals occurs on pico- to nanosecond time scales via two spectrally distinct radiative decay processes, which…

Electrolyte cation size is known to influence the electrochemical reduction of CO 2 over metals; however, a satisfactory explanation for this phenomenon has not been developed. We report here that these effects can be attributed to a previously unrecognized consequence of cation hydrolysis occurring in the vicinity of the cathode. With increasing cation size, the p K a for cation hydrolysis decreases and is sufficiently low for hydrated K +, Rb +, and Cs + to serve as buffering agents. Buffering lowers the pH near the cathode, leading to an increase in the local concentration of dissolved CO 2 . The consequences of these changes are an increase in cathode activity, a decrease in Faradaic efficiencies for H 2 and CH 4, and an increase in Faradaic efficiencies for CO, C 2 H 4, and C 2 H 5 OH, in full agreement with experimental observations for CO 2 reduction over Ag and Cu.

We develop an efficient fused-ring electron acceptor (ITIC-Th) based on indacenodithieno[3,2-b]thiophene core and thienyl side-chains for organic solar cells (OSCs). Relative to its counterpart with phenyl side-chains (ITIC), ITIC-Th shows lower energy levels (ITIC-Th: HOMO = -5.66 eV, LUMO = -3.93 eV; ITIC: HOMO = -5.48 eV, LUMO = -3.83 eV) due to the σ-inductive effect of thienyl side-chains, which can match with high-performance narrow-band-gap polymer donors and wide-band-gap polymer donors. ITIC-Th has higher electron mobility (6.1 × 10(-4) cm(2) V(-1) s(-1)) than ITIC (2.6 × 10(-4) cm(2) V(-1) s(-1)) due to enhanced intermolecular interaction induced by sulfur-sulfur interaction. We fabricate OSCs by blending ITIC-Th acceptor with two different low-band-gap and wide-band-gap polymer donors. In one case, a power conversion efficiency of 9.6% was observed, which rivals some of the highest efficiencies for single junction OSCs based on fullerene acceptors.

Medicine relies on the use of pharmacologically active agents (drugs) to manage and treat disease. However, drugs are not inherently effective; the benefit of a drug is directly related to the manner by which it is administered or delivered. Drug delivery can affect drug pharmacokinetics, absorption, distribution, metabolism, duration of therapeutic effect, excretion, and toxicity. As new therapeutics (e.g., biologics) are being developed, there is an accompanying need for improved chemistries and materials to deliver them to the target site in the body, at a therapeutic concentration, and for the required period of time. In this Perspective, we provide an historical overview of drug delivery and controlled release followed by highlights of four emerging areas in the field of drug delivery: systemic RNA delivery, drug delivery for localized therapy, oral drug delivery systems, and biologic drug delivery systems. In each case, we present the barriers to effective drug delivery as well as chemical and materials advances that are enabling the field to overcome these hurdles for…

The generation of reactive oxygen species (ROS) is an important mechanism of nanomaterial toxicity. We found that Prussian blue nanoparticles (PBNPs) can effectively scavenge ROS via multienzyme-like activity including peroxidase (POD), catalase (CAT), and superoxide dismutase (SOD) activity. Instead of producing hydroxyl radicals (•OH) through the Fenton reaction, PBNPs were shown to be POD mimetics that can inhibit •OH generation. We theorized for the first time that the multienzyme-like activities of PBNPs were likely caused by the abundant redox potentials of their different forms, making them efficient electron transporters. To study the ROS scavenging ability of PBNPs, a series of in vitro ROS-generating models was established using chemicals, UV irradiation, oxidized low-density lipoprotein, high glucose contents, and oxygen glucose deprivation and reperfusion. To demonstrate the ROS scavenging ability of PBNPs, an in vivo inflammation model was established using lipoproteins in Institute for Cancer Research (ICR) mice. The results indicated that PBNPs hold great potential…

A planar fused-ring electron acceptor (IC-C6IDT-IC) based on indacenodithiophene is designed and synthesized. IC-C6IDT-IC shows strong absorption in 500-800 nm with extinction coefficient of up to 2.4 × 10(5) M(-1) cm(-1) and high electron mobility of 1.1 × 10(-3) cm(2) V(-1) s(-1). The as-cast polymer solar cells based on IC-C6IDT-IC without additional treatments exhibit power conversion efficiencies of up to 8.71%.

A thorough understanding of the antimicrobial mechanisms of graphene materials (GMs) is critical to the manipulation of highly efficient antimicrobial nanomaterials for future biomedical applications. Here we review the most recent studies of GM-mediated antimicrobial properties. This review covers the physicochemical properties of GMs, experimental surroundings, and selected microorganisms as well as the interaction between GMs and selected microorganisms to explore controversial antimicrobial activities. Finally, we rationally analyze the strengths and weaknesses of the proposed mechanisms and provide new insights into the remaining challenges and perspectives for future studies.

The understanding of nanomaterials for targeted cancer therapy is of great importance as physical parameters of nanomaterials have been shown to be strong determinants that can promote cellular responses. However, there have been rare platforms that can vastly tune the core of nanoparticles at a molecular level despite various nanomaterials employed in such studies. Here we show targeted photodynamic therapy (PDT) with Zr(IV)-based porphyrinic metal-organic framework (MOF) nanoparticles. Through a bottom-up approach, the size of MOF nanoparticles was precisely tuned in a broad range with a designed functional motif, built upon selection of building blocks of the MOF. In particular, molecular properties of the porphyrinic linker are maintained in the MOF nanoparticles regardless of their sizes. Therefore, size-dependent cellular uptake and ensuing PDT allowed for screening of the optimal size of MOF nanoparticles for PDT while MOF nanoparticle formulation of the photosensitizer showed better PDT efficacy than that of its small molecule. Additionally, Zr6 clusters in the MOF enabled…

Rational optimization of catalytic performance has been one of the major challenges in catalysis. Here we report a bottom-up study on the ability of TiO2 and ZrO2 to optimize the CO2 conversion to methanol on Cu, using combined density functional theory (DFT) calculations, kinetic Monte Carlo (KMC) simulations, in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) measurements, and steady-state flow reactor tests. The theoretical results from DFT and KMC agree with in situ DRIFTS measurements, showing that both TiO2 and ZrO2 help to promote methanol synthesis on Cu via carboxyl intermediates and the reverse water-gas-shift (RWGS) pathway; the formate intermediates, on the other hand, likely act as a spectator eventually. The origin of the superior promoting effect of ZrO2 is associated with the fine-tuning capability of reduced Zr(3+) at the interface, being able to bind the key reaction intermediates, e.g. *CO2, *CO, *HCO, and *H2CO, moderately to facilitate methanol formation. This study demonstrates the importance of synergy between theory and experiments…

We report a colloidal synthesis approach to CsPbBr3 nanoplatelets (NPLs). The nucleation and growth of the platelets, which takes place at room temperature, is triggered by the injection of acetone in a mixture of precursors that would remain unreactive otherwise. The low growth temperature enables the control of the plate thickness, which can be precisely tuned from 3 to 5 monolayers. The strong two-dimensional confinement of the carriers at such small vertical sizes is responsible for a narrow PL, strong excitonic absorption, and a blue shift of the optical band gap by more than 0.47 eV compared to that of bulk CsPbBr3. We also show that the composition of the NPLs can be varied all the way to CsPbBr3 or CsPbI3 by anion exchange, with preservation of the size and shape of the starting particles. The blue fluorescent CsPbCl3 NPLs represent a new member of the scarcely populated group of blue-emitting colloidal nanocrystals. The exciton dynamics were found to be independent of the extent of 2D confinement in these platelets, and this was supported by band structure calculations.

Lead halide perovskites have over the past few years attracted considerable interest as photo absorbers in PV applications with record efficiencies now reaching 22%. It has recently been found that not only the composition but also the precise stoichiometry is important for the device performance. Recent reports have, for example, demonstrated small amount of PbI2 in the perovskite films to be beneficial for the overall performance of both the standard perovskite, CH3NH3PbI3, as well as for the mixed perovskites (CH3NH3)x(CH(NH2)2)(1-x)PbBryI(3-y). In this work a broad range of characterization techniques including X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), photo electron spectroscopy (PES), transient absorption spectroscopy (TAS), UV-vis, electroluminescence (EL), photoluminescence (PL), and confocal PL mapping have been used to further understand the importance of remnant PbI2 in perovskite solar cells. Our best devices were over 18% efficient, and had in line with previous results a small amount of excess PbI2. For the…

Impurity doping has been widely used to endow semiconductor nanocrystals with novel optical, electronic, and magnetic functionalities. Here, we introduce a new family of doped NCs offering unique insights into the chemical mechanism of doping, as well as into the fundamental interactions between the dopant and the semiconductor host. Specifically, by elucidating the role of relative bond strengths within the precursor and the host lattice, we develop an effective approach for incorporating manganese (Mn) ions into nanocrystals of lead-halide perovskites (CsPbX 3, where X = Cl, Br, or I). In a key enabling step not possible in, for example, II–VI nanocrystals, we use gentle chemical means to finely and reversibly tune the nanocrystal band gap over a wide range of energies (1.8–3.1 eV) via postsynthetic anion exchange. We observe a dramatic effect of halide identity on relative intensities of intrinsic band-edge and Mn emission bands, which we ascribe to the influence of the energy difference between the corresponding transitions on the characteristics of energy transfer between the…

Flexible power sources with high energy density are crucial for the realization of next-generation flexible electronics. Theoretically, rechargeable flexible zinc-air (Zn-air) batteries could provide high specific energy, while their large-scale applications are still greatly hindered by high cost and resources scarcity of noble-metal-based oxygen evolution reaction (OER)/oxygen reduction reaction (ORR) electrocatalysts as well as inferior mechanical properties of the air cathode. Combining metallic Co4N with superior OER activity and Co-N-C with perfect ORR activity on a free-standing and flexible electrode could be a good step for flexible Zn-air batteries, while lots of difficulties need to be overcome. Herein, as a proof-of-concept experiment, we first propose a strategy for in situ coupling of strung Co4N and intertwined N-C fibers, by pyrolyzation of the novel pearl-like ZIF-67/polypyrrole nanofibers network rooted on carbon cloth. Originating from the synergistic effect of Co4N and Co-N-C and the stable 3D interconnected conductive network structure, the obtained…

Low bandgap n-type organic semiconductor (n-OS) ITIC has attracted great attention for the application as an acceptor with medium bandgap p-type conjugated polymer as donor in nonfullerene polymer solar cells (PSCs) because of its attractive photovoltaic performance. Here we report a modification on the molecular structure of ITIC by side-chain isomerization with meta-alkyl-phenyl substitution, m-ITIC, to further improve its photovoltaic performance. In a comparison with its isomeric counterpart ITIC with para-alkyl-phenyl substitution, m-ITIC shows a higher film absorption coefficient, a larger crystalline coherence, and higher electron mobility. These inherent advantages of m-ITIC resulted in a higher power conversion efficiency (PCE) of 11.77% for the nonfullerene PSCs with m-ITIC as acceptor and a medium bandgap polymer J61 as donor, which is significantly improved over that (10.57%) of the corresponding devices with ITIC as acceptor. To the best of our knowledge, the PCE of 11.77% is one of the highest values reported in the literature to date for nonfullerene PSCs. More…

Electrochemical conversion of CO2 holds promise for utilization of CO2 as a carbon feedstock and for storage of intermittent renewable energy. Presently Cu is the only metallic electrocatalyst known to reduce CO2 to appreciable amounts of hydrocarbons, but often a wide range of products such as CO, HCOO–, and H2 are formed as well. Better catalysts that exhibit high activity and especially high selectivity for specific products are needed. Here a range of bimetallic Cu–Pd catalysts with ordered, disordered, and phase-separated atomic arrangements (Cuat:Pdat = 1:1), as well as two additional disordered arrangements (Cu3Pd and CuPd3 with Cuat:Pdat = 3:1 and 1:3), are studied to determine key factors needed to achieve high selectivity for C1 or C2 chemicals in CO2 reduction. When compared with the disordered and phase-separated CuPd catalysts, the ordered CuPd catalyst exhibits the highest selectivity for C1 products (>80%). The phase-separated CuPd and Cu3Pd achieve higher selectivity (>60%) for C2 chemicals than CuPd3 and ordered CuPd, which suggests that the probability of…

Single-molecule magnets (SMMs) that can be trapped in one of the bistable magnetic states separated by an energy barrier are among the most promising candidates for high-density information storage, quantum processing, and spintronics. To date, a considerable series of achievements have been made. However, the presence of fast quantum tunnelling of magnetization (QTM) in most SMMs, especially in single-ion magnets (SIMs), provides a rapid relaxation route and often sets up a limit for the relaxation time. Here, we pursue the pentagonal bipyramidal symmetry to suppress the QTM and present pentagonal bipyramidal Dy(III) SIMs [Dy(Cy3PO)2(H2O)5]Cl3·(Cy3PO)·H2O·EtOH (1) and [Dy(Cy3PO)2(H2O)5]Br3·2(Cy3PO)·2H2O·2EtOH (2), (Cy3PO = tricyclohexyl phosphine oxide). Magnetic characterizations reveal their fascinating SMM properties with high energy barriers as 472(7) K for 1 and 543(2) K for 2, along with a record magnetic hysteresis temperature up to 20 K for 2. These results, combined with the ab initio calculations, offer an illuminating insight into the vast possibility and potential of…

MoS 2 presents a promising low-cost catalyst for the hydrogen evolution reaction (HER), but the understanding about its active sites has remained limited. Here we present an unambiguous study of the catalytic activities of all possible reaction sites of MoS 2, including edge sites, sulfur vacancies, and grain boundaries. We demonstrate that, in addition to the well-known catalytically active edge sites, sulfur vacancies provide another major active site for the HER, while the catalytic activity of grain boundaries is much weaker. The intrinsic turnover frequencies (Tafel slopes) of the edge sites, sulfur vacancies, and grain boundaries are estimated to be 7.5 s –1 (65–75 mV/dec), 3.2 s –1 (65–85 mV/dec), and 0.1 s –1 (120–160 mV/dec), respectively. We also demonstrate that the catalytic activity of sulfur vacancies strongly depends on the density of the vacancies and the local crystalline structure in proximity to the vacancies. Unlike edge sites, whose catalytic activity linearly depends on the length, sulfur vacancies show optimal catalytic activities when the vacancy density is…

To fabricate efficient formamidinium tin iodide (FASnI3) perovskite solar cells (PSCs), it is essential to deposit uniform and dense perovskite layers and reduce Sn(4+) content. Here we used solvent-engineering and nonsolvent dripping process with SnF2 as an inhibitor of Sn(4+). However, excess SnF2 induces phase separation on the surface of the perovskite film. In this work, we report the homogeneous dispersion of SnF2 via the formation of the SnF2-pyrazine complex. Consequently, we fabricated FASnI3 PSCs with high reproducibility, achieving a high power conversion efficiency of 4.8%. Furthermore, the encapsulated device showed a stable performance for over 100 days, maintaining 98% of its initial efficiency.

Amyloid-β (Aβ) is a 39-42 residue protein produced by the cleavage of the amyloid precursor protein (APP), which subsequently aggregates to form cross-β amyloid fibrils that are a hallmark of Alzheimer's disease (AD). The most prominent forms of Aβ are Aβ1-40 and Aβ1-42, which differ by two amino acids (I and A) at the C-terminus. However, Aβ42 is more neurotoxic and essential to the etiology of AD. Here, we present an atomic resolution structure of a monomorphic form of AβM01-42 amyloid fibrils derived from over 500 (13)C-(13)C, (13)C-(15)N distance and backbone angle structural constraints obtained from high field magic angle spinning NMR spectra. The structure (PDB ID: 5KK3 ) shows that the fibril core consists of a dimer of Aβ42 molecules, each containing four β-strands in a S-shaped amyloid fold, and arranged in a manner that generates two hydrophobic cores that are capped at the end of the chain by a salt bridge. The outer surface of the monomers presents hydrophilic side chains to the solvent. The interface between the monomers of the dimer shows clear contacts between M35 of…

The targeted synthesis of 3D COFs has been considered challenging, especially adopting new topologies and bearing photoelectric units. Herein, for the first time, we report the synthesis and characterization of a novel 3D pyrene-based COF (3D-Py-COF), by selectively choosing the geometry of the precursors and the connection patterns. Based on X-ray diffraction measurement and detailed simulations, 3D-Py-COF is proposed to adopt a two-fold interpenetrated pts topology, which has never been reported before. In addition, 3D-Py-COF has a narrow pore size distribution and high surface area and also features selective absorption of CO2 over N2. Interestingly, due to the existence of isolated pyrene units in the 3D framework, 3D-Py-COF is the first fluorescent 3D COF and can be used in explosive detection. Our results not only show it is possible to rationally design and synthesize 3D COFs with other topologies but also demonstrate that the incorporation of photoelectric units into 3D COFs can allow the resulting materials with interesting properties.

Mimicking proton conduction mechanism of Nafion to construct novel proton-conducting materials with low cost and high proton conductivity is of wide interest. Herein, we have designed and synthesized a cationic covalent organic framework with high thermal and chemical stability by combining a cationic monomer, ethidium bromide (EB) (3,8-diamino-5-ethyl-6-phenylphenanthridinium bromide), with 1,3,5-triformylphloroglucinol (TFP) in Schiff base reactions. This is the first time that the stable cationic crystalline frameworks allowed for the fabrication of a series of charged COFs (EB-COF:X, X = F, Cl, Br, I) through ion exchange processes. Exchange of the extra framework ions can finely modulate the COFs' porosity and pore sizes at nanoscale. More importantly, by introducing PW12O40(3-) into this porous cationic framework, we can greatly enhance the proton conductivity of ionic COF-based material. To the best of our knowledge, EB-COF:PW12 shows the best proton conductivity at room temperature among ever reported porous organic materials.

The relationships among the macroscopic compositional parameters of a Cu-exchanged SSZ-13 zeolite catalyst, the types and numbers of Cu active sites, and activity for the selective catalytic reduction (SCR) of NOx with NH3 are established through experimental interrogation and computational analysis of materials across the catalyst composition space. Density functional theory, stochastic models, and experimental characterizations demonstrate that within the synthesis protocols applied here and across Si:Al ratios, the volumetric density of six-membered-rings (6MR) containing two Al (2Al sites) is consistent with a random Al siting in the SSZ-13 lattice subject to Löwenstein's rule. Further, exchanged Cu(II) ions first populate these 2Al sites before populating remaining unpaired, or 1Al, sites as Cu(II)OH. These sites are distinguished and enumerated ex situ through vibrational and X-ray absorption spectroscopies (XAS) and chemical titrations. In situ and operando XAS follow Cu oxidation state and coordination environment as a function of environmental conditions including…

Non-fullerene polymer solar cells (PSCs) with solution-processable n-type organic semiconductor (n-OS) as acceptor have seen rapid progress recently owing to the synthesis of new low bandgap n-OS, such as ITIC. To further increase power conversion efficiency (PCE) of the devices, it is of a great challenge to develop suitable polymer donor material that matches well with the low bandgap n-OS acceptors thus providing complementary absorption and nanoscaled blend morphology, as well as suppressed recombination and minimized energy loss. To address this challenge, we synthesized three medium bandgap 2D-conjugated bithienyl-benzodithiophene-alt-fluorobenzotriazole copolymers J52, J60, and J61 for the application as donor in the PSCs with low bandgap n-OS ITIC as acceptor. The three polymers were designed with branched alkyl (J52), branched alkylthio (J60), and linear alkylthio (J61) substituent on the thiophene conjugated side chain of the benzodithiophene (BDT) units for studying effect of the substituents on the photovoltaic performance of the polymers. The alkylthio side chain,…

Oxygen vacancy on the surface of metal oxides is one of the most important defects which acts as the reactive site in a variety of catalytic reactions. In this work, operando spectroscopy methodology was employed to study the CO2 methanation reaction catalyzed by Ru/CeO2 (with oxygen vacancy in CeO2) and Ru/α-Al2O3 (without oxygen vacancy), respectively, so as to give a thorough understanding on active site dependent reaction mechanism. In Ru/CeO2 catalyst, operando XANES, IR, and Raman were used to reveal the generation process of Ce(3+), surface hydroxyl, and oxygen vacancy as well as their structural evolvements under practical reaction conditions. The steady-state isotope transient kinetic analysis (SSITKA)-type in situ DRIFT infrared spectroscopy undoubtedly substantiates that CO2 methanation undergoes formate route over Ru/CeO2 catalyst, and the formate dissociation to methanol catalyzed by oxygen vacancy is the rate-determining step. In contrast, CO2 methanation undergoes CO route over Ru surface in Ru/α-Al2O3 with the absence of oxygen vacancy, demonstrating active site…

Iron–nitrogen on carbon (Fe–N/C) catalysts have emerged as promising nonprecious metal catalysts (NPMCs) for oxygen reduction reaction (ORR) in energy conversion and storage devices. It has been widely suggested that an active site structure for Fe–N/C catalysts contains Fe–N x coordination. However, the preparation of high-performance Fe–N/C catalysts mostly involves a high-temperature pyrolysis step, which generates not only catalytically active Fe–N x sites, but also less active large iron-based particles. Herein, we report a general “silica-protective-layer-assisted” approach that can preferentially generate the catalytically active Fe–N x sites in Fe–N/C catalysts while suppressing the formation of large Fe-based particles. The catalyst preparation consisted of an adsorption of iron porphyrin precursor on carbon nanotube (CNT), silica layer overcoating, high-temperature pyrolysis, and silica layer etching, which yielded CNTs coated with thin layer of porphyrinic carbon (CNT/PC) catalysts. Temperature-controlled in situ X-ray absorption spectroscopy during the preparation of…

The development of highly active, universal, and stable inexpensive electrocatalysts/cocatalysts for hydrogen evolution reaction (HER) by morphology and structure modulations remains a great challenge. Herein, a simple self-template strategy was developed to synthesize hollow Co-based bimetallic sulfide (MxCo3-xS4, M = Zn, Ni, and Cu) polyhedra with superior HER activity and stability. Homogenous bimetallic metal-organic frameworks are transformed to hollow bimetallic sulfides by solvothermal sulfidation and thermal annealing. Electrochemical measurements and density functional theory computations show that the combination of hollow structure and homoincorporation of a second metal significantly enhances the HER activity of Co3S4. Specifically, the homogeneous doping in Co3S4 lattice optimizes the Gibbs free energy for H* adsorption and improves the electrical conductivity. Impressively, hollow Zn0.30Co2.70S4 exhibits electrocatalytic HER activity better than most of the reported nobel-metal-free electrocatalysts over a wide pH range, with overpotentials of 80, 90, and 85 mV at 10…

Environmental challenges especially air pollution (particulate matter (PM) and toxic gases) pose serious threats to public health globally. Metal-organic frameworks (MOFs) are crystalline materials with high porosity, tunable pore size, and rich functionalities, holding the promise for poisonous pollutants capture. Here, nanocrystals of four unique MOF structures are processed into nanofibrous filters (noted as MOFilter) with high MOF loadings (up to 60 wt %). The MOFilters show high PM removal efficiencies up to 88.33 ± 1.52% and 89.67 ± 1.33% for PM2.5 and PM10, respectively, in the hazy environment, and the performance remains largely unchanged over 48 h of continuous filtration. For the first time, the interactions between such porous crystalline material and particulate pollutants were explored. These thin MOFilters can further selectively capture and retain SO2 when exposed to a stream of SO2/N2 mixture, and their hierarchical nanostructures can easily permeate fresh air at high gas flow rate with the pressure drop <20 Pa.

Supercapacitors (or electric double-layer capacitors) are high-power energy storage devices that store charge at the interface between porous carbon electrodes and an electrolyte solution. These devices are already employed in heavy electric vehicles and electronic devices, and can complement batteries in a more sustainable future. Their widespread application could be facilitated by the development of devices that can store more energy, without compromising their fast charging and discharging times. In situ characterization methods and computational modeling techniques have recently been developed to study the molecular mechanisms of charge storage, with the hope that better devices can be rationally designed. In this Perspective, we bring together recent findings from a range of experimental and computational studies to give a detailed picture of the charging mechanisms of supercapacitors. Nuclear magnetic resonance experiments and molecular dynamics simulations have revealed that the electrode pores contain a considerable number of ions in the absence of an applied charging…

Faceted NiO nanoparticles preferentially exposing high surface energy planes demand attention due to their excellent electrocatalytic properties. However, the activity of faceted NiO nanoparticles generally remains suboptimal due to their large lateral size and thickness, which severely limits the availability of coordinatively unsaturated active reactive edge and corner sites. Here, ultrafine NiO nanosheets with a platelet size of ∼4.0 nm and thickness (∼1.1 nm) stabilized by TiO2 were successfully prepared by calcination of a monolayer layered double hydroxide precursor. The ultrafine NiO nanosheets displayed outstanding performance in electrochemical water oxidation due to a high proportion of reactive NiO {110} facets, intrinsic Ni(3+) and Ti(3+) sites, and abundant interfaces, which act synergistically to promote H2O adsorption and facilitate charge-transfer.

Application of transition metal phosphide (TMP) catalysts for full water splitting has great potential to help relieve the energy crisis. Various methods have been investigated to obtain high catalytic activity, but the use of electronic structure regulation by incorporation of different elements is of particular simplicity and significance for development of a universal TMP synthesis method. We herein describe a novel approach for fabricating a series of TMPs by pyrolyzing phytic acid (PA) cross-linked metal complexes. The introduction of oxygen atoms into TMPs not only enhanced their intrinsic electrical conductivity, facilitating electron transfer, but activated active sites via elongating the M–P bond, favoring the hydrogen evolution reaction (HER) or oxygen evolution reaction (OER). MoP exhibited relative low HER overpotentials of 118 mV and 93 mV while supporting a current density of 20 mA·cm –2 in 0.5 M H 2 SO 4 and 1 M KOH electrolytes, respectively. When CoP was applied as a catalyst for OER, only 280 mV overpotential was required to reach current density of 10 mA·cm –2 .…

The MoS4(2-) ion was intercalated into magnesium-aluminum layered double hydroxide (MgAl-NO3-LDH) to produce a single phase material of Mg0.66Al0.34(OH)2(MoS4)0.17·nH2O (MgAl-MoS4-LDH), which demonstrates highly selective binding and extremely efficient removal of heavy metal ions such as Cu(2+), Pb(2+), Ag(+), and Hg(2+). The MoS4-LDH displays a selectivity order of Co(2+), Ni(2+), Zn(2+) < Cd(2+) ≪ Pb(2+) < Cu(2+) < Hg(2+) < Ag(+) for the metal ions. The enormous capacities for Hg(2+) (∼500 mg/g) and Ag(+) (450 mg/g) and very high distribution coefficients (Kd) of ∼10(7) mL/g place the MoS4-LDH at the top of materials known for such removal. Sorption isotherm for Ag(+) agrees with the Langmuir model suggesting a monolayer adsorption. It can rapidly lower the concentrations of Cu(2+), Pb(2+), Hg(2+), and Ag(+) from ppm levels to trace levels of ≤1 ppb. For the highly toxic Hg(2+) (at ∼30 ppm concentration), the adsorption is exceptionally rapid and highly selective, showing a 97.3% removal within 5 min, 99.7% removal within 30 min, and ∼100% removal within 1 h. The sorption…

Nitrogen fixation is one of the most important issues but a long-standing challenge in chemistry. Here, we propose FeN3-embedded graphene as the catalyst for nitrogen fixation from first-principles calculations. Results show that in view of the chemical coordination, the FeN3 center is highly spin-polarized with a localized magnetic moment substantially to promote N2 adsorption and activate its inert N-N triple bond. The synergy between the graphene and FeN3 equips the system with novel features for the catalytic conversion of the activated N2 into NH3 via a six-proton and six-electron process, following three possible reaction pathways at room temperature. Our findings provide a rational paradigm for catalytic nitrogen fixation that would be conducive to ammonia production.

With the demonstration of small-area, single-junction polymer solar cells (PSCs) with power conversion efficiencies (PCEs) over the 10% performance milestone, the manufacturing of high-performance large-area PSC modules is becoming the most critical issue for commercial applications. However, materials and processes that are optimized for fabricating small-area devices may not be applicable for the production of high-performance large-area PSC modules. One of the challenges is to develop new conductive interfacial materials that can be easily processed with a wide range of thicknesses without significantly affecting the performance of the PSCs. Toward this goal, we report two novel naphthalene diimide-based, self-doped, n-type water/alcohol-soluble conjugated polymers (WSCPs) that can be processed with a broad thickness range of 5 to 100 nm as efficient electron transporting layers (ETLs) for high-performance PSCs. Space charge limited current and electron spin resonance spectroscopy studies confirm that the presence of amine or ammonium bromide groups on the side chains of the WSCP…

A strategy for cross-electrophile coupling has been developed via the merger of photoredox and transition metal catalysis. In this report, we demonstrate the use of commercially available tris(trimethylsilyl)silane with metallaphotoredox catalysis to efficiently couple alkyl bromides with aryl or heteroaryl bromides in excellent yields. We hypothesize that a photocatalytically generated silyl radical species can perform halogen-atom abstraction to activate alkyl halides as nucleophilic cross-coupling partners. This protocol allows the use of mild yet robust conditions to construct Csp(3)-Csp(2) bonds generically via a unique cross-coupling pathway.

The starting point of this study of through-space substituent effects on the catalysis of the electrochemical CO 2 -to-CO conversion by iron(0) tetraphenylporphyrins is the linear free energy correlation between through-structure electronic effects and the iron(I/0) standard potential that we established separately. The introduction of four positively charged trimethylanilinium groups at the para positions of the tetraphenylporphyrin (TPP) phenyls results in an important positive deviation from the correlation and a parallel improvement of the catalytic Tafel plot. The assignment of this catalysis boosting effect to the Coulombic interaction of these positive charges with the negative charge borne by the initial Fe 0 –CO 2 adduct is confirmed by the negative deviation observed when the four positive charges are replaced by four negative charges borne by sulfonate groups also installed in the para positions of the TPP phenyls. The climax of this strategy of catalysis boosting by means of Coulombic stabilization of the initial Fe 0 –CO 2 adduct is reached when four positively charged…

All-solid-state Li-batteries using solid-state electrolytes (SSEs) offer enhanced safety over conventional Li-ion batteries with organic liquid electrolytes due to the nonflammable nature of SSEs. The superior mechanical strength of SSEs can also protect against Li dendrite penetration, which enables the use of the highest specific capacity (3861 mAh/g) and lowest redox potential (-3.04 V vs standard hydrogen electrode) anode: Li metal. However, contact between the Li metal and SSEs presents a major challenge, where a large polarization occurs at the Li metal/SSE interface. Here, the chemical properties of a promising oxide-based SSE (garnet) changed from "super-lithiophobicity" to "super-lithiophilicity" through an ultrathin coating of amorphous Si deposited by plasma-enhanced chemical vapor deposition (PECVD). The wettability transition is due to the reaction between Li and Si and the in situ formation of lithiated Si. As a result, symmetric cells composed of a Si-coated garnet-structured SSE and Li metal electrodes exhibited much smaller impedance and excellent stability upon…

Two-dimensional (2D) metal-organic framework (MOF) nanosheets are attracting increasing research interest. Here, for the first time, we report the facile synthesis of 2D porphyrin paddlewheel framework-3 (PPF-3) MOF nanosheets with thickness of ca. 12-43 nm. Through the simultaneous sulfidation and carbonization of PPF-3 MOF nanosheets, we have prepared the 2D nanocomposite of CoS1.097 nanoparticles (NPs) and nitrogen-doped carbon, referred to as CoSNC, in which the CoS1.097 NPs with size of ca. 10 nm are embedded in the nitrogen-doped carbon matrix. As a proof-of-concept application, the obtained 2D CoSNC nanocomposite is used as an electrode material for a supercapacitor, which exhibits a specific capacitance of 360.1 F g(-1) at a current density of 1.5 A g(-1). Moreover, the composite electrode also shows high rate capability. Its specific capacitance delivered at a current density of 30.0 A g(-1) retains 56.8% of the value at 1.5 A g(-1).

Here we report the development of a C(sp 3 )–H cross-coupling platform enabled by the catalytic generation of chlorine radicals by nickel and photoredox catalysis. Aryl chlorides serve as both cross-coupling partners and the chlorine radical source for the α-oxy C(sp 3 )–H arylation of cyclic and acyclic ethers. Mechanistic studies suggest that photolysis of a Ni(III) aryl chloride intermediate, generated by photoredox-mediated single-electron oxidation, leads to elimination of a chlorine radical in what amounts to the sequential capture of two photons. Arylations of a benzylic C(sp 3 )–H bond of toluene and a completely unactivated C(sp 3 )–H bond of cyclohexane demonstrate the broad implications of this manifold for accomplishing numerous C(sp 3 )–H bond functionalizations under exceptionally mild conditions.

Highly luminescent covalent organic frameworks (COFs) are rarely achieved because of the aggregation-caused quenching (ACQ) of π-π stacked layers. Here, we report a general strategy to design highly emissive COFs by introducing an aggregation-induced emission (AIE) mechanism. The integration of AIE-active units into the polygon vertices yields crystalline porous COFs with periodic π-stacked columnar AIE arrays. These columnar AIE π-arrays dominate the luminescence of the COFs, achieve exceptional quantum yield via a synergistic structural locking effect of intralayer covalent bonding and interlayer noncovalent π-π interactions and serve as a highly sensitive sensor to report ammonia down to sub ppm level. Our strategy breaks through the ACQ-based mechanistic limitations of COFs and opens a way to explore highly emissive COF materials.

Traditional photodynamic therapy (PDT) suffers from the critical issues of low tissue-penetrating depth of light and potential phototoxicity, which are expected to be solved by developing new dynamic therapy-based therapeutic modalities such as sonodynamic therapy (SDT). In this work, we report on the design/fabrication of a high-performance multifunctional nanoparticulate sonosensitizer for efficient in vivo magnetic resonance imaging (MRI)-guided SDT against cancer. The developed approach takes the structural and compositional features of mesoporous organosilica-based nanosystems for the fabrication of sonosensitizers with intriguing theranostic performance. The well-defined mesoporosity facilitates the high loading of organic sonosensitizers (protoporphyrin, PpIX) and further chelating of paramagnetic transitional metal Mn ions based on metalloporphyrin chemistry (MnPpIX). The mesoporous structure of large surface area also maximizes the accessibility of water molecules to the encapsulated paramagnetic Mn ions, endowing the composite sonosensitizers with markedly high MRI…

Well-dispersed and ultrasmall Pd clusters in nanosized silicalite-1 (MFI) zeolite have been prepared under direct hydrothermal conditions using [Pd(NH2CH2CH2NH2)2]Cl2 as precursor. High-resolution scanning transmission electron microscopy studies indicate that the Pd clusters are encapsulated within the intersectional channels of MFI, and the Pd clusters in adjacent channels visually aggregate, forming nanoparticles (NPs) of ∼1.8 nm. The resultant catalysts show an excellent activity and highly efficient H2 generation toward the complete decomposition of formic acid (FA) under mild conditions. Notably, thanks to the further reduced Pd NP size (∼1.5 nm) and the additionally introduced basic sites, the Pd/S-1-in-K catalyst affords turnover frequency values up to 856 h(-1) at 25 °C and 3027 h(-1) at 50 °C. The easy in situ confinement synthesis of metal clusters in zeolites endows the catalysts with superior catalytic activities, excellent recyclability, and high thermal stability, thus opening new perspectives for the practical application of FA as a viable and effective H2 storage…

Redox flow batteries (RFBs) are a viable technology to store renewable energy in the form of electricity that can be supplied to electricity grids. However, widespread implementation of traditional RFBs, such as vanadium and Zn–Br 2 RFBs, is limited due to a number of challenges related to materials, including low abundance and high costs of redox-active metals, expensive separators, active material crossover, and corrosive and hazardous electrolytes. To address these challenges, we demonstrate a neutral aqueous organic redox flow battery (AORFB) technology utilizing a newly designed cathode electrolyte containing a highly water-soluble ferrocene molecule. Specifically, water-soluble (ferrocenylmethyl)trimethylammonium chloride ( FcNCl, 4.0 M in H 2 O, 107.2 Ah/L, and 3.0 M in 2.0 NaCl, 80.4 Ah/L) and N 1 -ferrocenylmethyl- N 1, N 1, N 2, N 2, N 2 -pentamethylpropane-1,2-diaminium dibromide, ( FcN 2 Br 2, 3.1 M in H 2 O, 83.1 Ah/L, and 2.0 M in 2.0 M NaCl, 53.5 Ah/L) were synthesized through structural decoration of hydrophobic ferrocene with synergetic hydrophilic functionalities…

Two-dimensional (2D) metal carbides and nitrides, called MXenes, have attracted great interest for applications such as energy storage. We demonstrate their potential as Schottky-barrier-free metal contacts to 2D semiconductors, providing a solution to the contact-resistance problem in 2D electronics. On the basis of first-principles calculations, we find that the surface chemistry strongly affects Fermi level of MXenes: O termination always increases the work function with respect to that of bare surface, OH always decreases it, whereas F exhibits either trend depending on the specific material. This phenomenon originates from the effect of surface dipoles, which together with the weak Fermi level pinning, enable Schottky-barrier-free hole (or electron) injection into 2D semiconductors through van der Waals junctions with some of the O-terminated (or all the OH-terminated) MXenes. Furthermore, we suggest synthetic routes to control surface terminations based on calculated formation energies. This study enhances understanding of the correlation between surface chemistry and…

Redox-active support materials can help reduce the noble-metal loading of a solid chemical catalyst while offering electronic catalyst-support interactions beneficial for catalyst durability. This is well known in heterogeneous gas-phase catalysis but much less discussed for electrocatalysis at electrified liquid-solid interfaces. Here, we demonstrate experimental evidence for electronic catalyst-support interactions in electrochemical environments and study their role and contribution to the corrosion stability of catalyst/support couples. Electrochemically oxidized Ir oxide nanoparticles, supported on high surface area carbons and oxides, were selected as model catalyst/support systems for the electrocatalytic oxygen evolution reaction (OER). First, the electronic, chemical, and structural state of the catalyst/support couple was compared using XANES, EXAFS, TEM, and depth-resolved XPS. While carbon-supported oxidized Ir particle showed exclusively the redox state (+4), the Ir/IrOx/ATO system exhibited evidence of metal/metal-oxide support interactions (MMOSI) that stabilized the…

Materials development for artificial photosynthesis, in particular, CO 2 reduction, has been under extensive efforts, ranging from inorganic semiconductors to molecular complexes. In this report, we demonstrate a metal–organic framework (MOF)-coated nanoparticle photocatalyst with enhanced CO 2 reduction activity and stability, which stems from having two different functional units for activity enhancement and catalytic stability combined together as a single construct. Covalently attaching a CO 2 -to-CO conversion photocatalyst Re I (CO) 3 (BPYDC)Cl, BPYDC = 2,2′-bipyridine-5,5′-dicarboxylate, to a zirconium MOF, UiO-67 (Re n -MOF), prevents dimerization leading to deactivation. By systematically controlling its density in the framework ( n = 0, 1, 2, 3, 5, 11, 16, and 24 complexes per unit cell), the highest photocatalytic activity was found for Re 3 -MOF. Structural analysis of Re n -MOFs suggests that a fine balance of proximity between photoactive centers is needed for cooperatively enhanced photocatalytic activity, where an optimum number of Re complexes per unit cell should…

Vacancy-ordered double perovskites of the general formula A2BX6 are a family of perovskite derivatives composed of a face-centered lattice of nearly isolated [BX6] units with A-site cations occupying the cuboctahedral voids. Despite the presence of isolated octahedral units, the close-packed iodide lattice provides significant electronic dispersion, such that Cs2SnI6 has recently been explored for applications in photovoltaic devices. To elucidate the structure-property relationships of these materials, we have synthesized solid-solution Cs2Sn1-xTexI6. However, even though tellurium substitution increases electronic dispersion via closer I-I contact distances, the substitution experimentally yields insulating behavior from a significant decrease in carrier concentration and mobility. Density functional calculations of native defects in Cs2SnI6 reveal that iodine vacancies exhibit a low enthalpy of formation, and that the defect energy level is a shallow donor to the conduction band rendering the material tolerant to these defect states. The increased covalency of Te-I bonding…

The search for new types of membrane materials has been of continuous interest in both academia and industry, given their importance in a plethora of applications, particularly for energy-efficient separation technology. In this contribution, we demonstrate for the first time that a metal-organic framework (MOF) can be grown on the covalent-organic framework (COF) membrane to fabricate COF-MOF composite membranes. The resultant COF-MOF composite membranes demonstrate higher separation selectivity of H2/CO2 gas mixtures than the individual COF and MOF membranes. A sound proof for the synergy between two porous materials is the fact that the COF-MOF composite membranes surpass the Robeson upper bound of polymer membranes for mixture separation of a H2/CO2 gas pair and are among the best gas separation MOF membranes reported thus far.

Hydrogenations constitute fundamental processes in organic chemistry and allow for atom-efficient and clean functional group transformations. In fact, the selective reduction of nitriles, ketones, and aldehydes with molecular hydrogen permits access to a green synthesis of valuable amines and alcohols. Despite more than a century of developments in homogeneous and heterogeneous catalysis, efforts toward the creation of new useful and broadly applicable catalyst systems are ongoing. Recently, Earth-abundant metals have attracted significant interest in this area. In the present study, we describe for the first time specific molecular-defined manganese complexes that allow for the hydrogenation of various polar functional groups. Under optimal conditions, we achieve good functional group tolerance, and industrially important substrates, e.g., for the flavor and fragrance industry, are selectively reduced.

The enhancement of power conversion efficiency (PCE) and the development of toxic Cd-, Pb-free quantum dots (QDs) are critical for the prosperity of QD-based solar cells. It is known that the properties (such as light harvesting range, band gap alignment, density of trap state defects, etc.) of QD light harvesters play a crucial effect on the photovoltaic performance of QD based solar cells. Herein, high quality ∼4 nm Cd-, Pb-free Zn-Cu-In-Se alloyed QDs with an absorption onset extending to ∼1000 nm were developed as effective light harvesters to construct quantum dot sensitized solar cells (QDSCs). Due to the small particle size, the developed QD sensitizer can be efficiently immobilized on TiO2 film electrode in less than 0.5 h. An average PCE of 11.66% and a certified PCE of 11.61% have been demonstrated in the QDSCs based on these Zn-Cu-In-Se QDs. The remarkably improved photovoltaic performance for Zn-Cu-In-Se QDSCs vs Cu-In-Se QDSCs (11.66% vs 9.54% in PCE) is mainly derived from the higher conduction band edge, which favors the photogenerated electron extraction and results…

A self-healing dielectric elastomer is achieved by the incorporation of metal-ligand coordination as cross-linking sites in nonpolar polydimethylsiloxane (PDMS) polymers. The ligand is 2,2'-bipyridine-5,5'-dicarboxylic amide, while the metal salts investigated here are Fe(2+) and Zn(2+) with various counteranions. The kinetically labile coordination between Zn(2+) and bipyridine endows the polymer fast self-healing ability at ambient condition. When integrated into organic field-effect transistors (OFETs) as gate dielectrics, transistors with FeCl2 and ZnCl2 salts cross-linked PDMS exhibited increased dielectric constants compared to PDMS and demonstrated hysteresis-free transfer characteristics, owing to the low ion conductivity in PDMS and the strong columbic interaction between metal cations and the small Cl(-) anions which can prevent mobile anions drifting under gate bias. Fully stretchable transistors with FeCl2-PDMS dielectrics were fabricated and exhibited ideal transfer characteristics. The gate leakage current remained low even after 1000 cycles at 100% strain. The…

The imine linkages of two layered, porous covalent organic frameworks (COFs), TPB-TP-COF ([C 6 H 3 (C 6 H 4 N) 3 ] 2 [C 6 H 4 (CH) 2 ] 3, 1 ) and 4PE-1P-COF ([C 2 (C 6 H 4 N) 4 ][C 6 H 4 (CH) 2 ] 2, 2 ), have been transformed into amide linkages to make the respective isostructural amide COFs 1′ and 2′ by direct oxidation with retention of crystallinity and permanent porosity. Remarkably, the oxidation of both imine COFs is complete, as assessed by FT-IR and 13 C CP-MAS NMR spectroscopy and demonstrates (a) the first chemical conversion of a COF linkage and (b) how the usual “crystallization problem” encountered in COF chemistry can be bypassed to access COFs, such as these amides, that are typically thought to be difficult to obtain by the usual de novo methods. The amide COFs show improved chemical stability relative to their imine progenitors.

A new metal-organic framework Zn2(H2O)(dobdc)·0.5(H2O) (UTSA-74, H4dobdc = 2,5-dioxido-1,4-benzenedicarboxylic acid), Zn-MOF-74/CPO-27-Zn isomer, has been synthesized and structurally characterized. It has a novel four coordinated fgl topology with one-dimensional channels of about 8.0 Å. Unlike metal sites in the well-established MOF-74 with a rod-packing structure in which each of them is in a five coordinate square pyramidal coordination geometry, there are two different Zn(2+) sites within the binuclear secondary building units in UTSA-74 in which one of them (Zn1) is in a tetrahedral while another (Zn2) in an octahedral coordination geometry. After activation, the two axial water molecules on Zn2 sites can be removed, generating UTSA-74a with two accessible gas binding sites per Zn2 ion. Accordingly, UTSA-74a takes up a moderately high and comparable amount of acetylene (145 cm(3)/cm(3)) to Zn-MOF-74. Interestingly, the accessible Zn(2+) sites in UTSA-74a are bridged by carbon dioxide molecules instead of being terminally bound in Zn-MOF-74, so UTSA-74a adsorbs a much smaller…

Tin-based halide perovskite materials have been successfully employed in lead-free perovskite solar cells, but the tendency of these materials to form leakage pathways from p-type defect states, mainly Sn 4+ and Sn vacancies, causes poor device reproducibility and limits the overall power conversion efficiencies (PCEs). Here, we present an effective process that involves a reducing vapor atmosphere during the preparation of Sn-based halide perovskite solar cells to solve this problem, using MASnI 3, CsSnI 3, and CsSnBr 3 as the representative absorbers. This process enables the fabrication of remarkably improved solar cells with PCEs of 3.89%, 1.83%, and 3.04% for MASnI 3, CsSnI 3, and CsSnBr 3, respectively. The reducing vapor atmosphere process results in more than 20% reduction of Sn 4+ /Sn 2+ ratios, which leads to greatly suppressed carrier recombination, to a level comparable to their lead-based counterparts. These results mark an important step toward a deeper understanding of the intrinsic Sn-based halide perovskite materials, paving the way to the realization of low-cost…

A highly porous metal-organic framework (MOF) incorporating both exposed metal sites and nitrogen-rich triazole groups was successfully constructed via solvothermal assembly of a clicked octcarboxylate ligand and Cu(II) ions, which presents a high affinity toward CO2 molecules clearly verified by gas adsorption and Raman spectral detection. The constructed MOF featuring CO2-adsorbing property and exposed Lewis-acid metal sites could serve as an excellent catalyst for CO2-based chemical fixation. Catalytic activity of the MOF was confirmed by remarkably high efficiency on CO2 cycloaddition with small epoxides. When extending the substrates to larger ones, its activity showed a sharp decrease. These observations reveal that MOF-catalyzed CO2 cycloaddition of small substrates was carried out within the framework, while large ones cannot easily enter into the porous framework for catalytic reactions. Thus, the synthesized MOF exhibits high catalytic selectivity to different substrates on account of the confinement of the pore diameter. The high efficiency and size-dependent selectivity…

Solar-to-chemical energy conversion is a challenging subject for renewable energy storage. In the past 40 years, overall water splitting into H2 and O2 by semiconductor photocatalysis has been studied extensively; however, they need noble metals and extreme care to avoid explosion of the mixed gases. Here we report that generating hydrogen peroxide (H2O2) from water and O2 by organic semiconductor photocatalysts could provide a new basis for clean energy storage without metal and explosion risk. We found that carbon nitride-aromatic diimide-graphene nanohybrids prepared by simple hydrothermal-calcination procedure produce H2O2 from pure water and O2 under visible light (λ > 420 nm). Photoexcitation of the semiconducting carbon nitride-aromatic diimide moiety transfers their conduction band electrons to graphene and enhances charge separation. The valence band holes on the semiconducting moiety oxidize water, while the electrons on the graphene moiety promote selective two-electron reduction of O2. This metal-free system produces H2O2 with solar-to-chemical energy conversion…

Methylammonium lead halide perovskites suffer from poor stability because of their high sensitivity to moisture. Inorganic material coatings of SiO2 are preferred for coupling with perovskites to improve their stability, whereas the conventional SiO2 formation method is unsuitable because it requires water. Here, a simple SiO2 generation method based on the high hydrolysis rate of tetramethyl orthosilicate in analytical-grade toluene was developed to avoid the addition of water and catalyst. As a result, SiO2-encapsulated CH3NH3PbBr3 quantum dots (MAPB-QDs/SiO2) were fabricated without decreasing the quantum yield. Photostability tests indicated that the MAPB-QDs/SiO2 samples were markedly more stable than the unencapsulated MAPB-QDs. The photoluminescence (PL) of the MAPB-QDs/SiO2 powders was maintained at 94.10% after 470 nm LED illumination for 7 h, which was much higher than the remnant PL (38.36%) of the pure MAPB-QD sample under a relative humidity of 60%. Similar test results were observed when the MAPB-QDs/SiO2 powders were incorporated into the poly(methyl methacrylate)…

Covalent organic nanosheets (CONs) have emerged as functional two-dimensional materials for versatile applications. Although π-π stacking between layers, hydrolytic instability, possible restacking prevents their exfoliation on to few thin layered CONs from crystalline porous polymers. We anticipated rational designing of a structure by intrinsic ionic linker could be the solution to produce self-exfoliated CONs without external stimuli. In an attempt to address this issue, we have synthesized three self-exfoliated guanidinium halide based ionic covalent organic nanosheets (iCONs) with antimicrobial property. Self-exfoliation phenomenon has been supported by molecular dynamics (MD) simulation as well. Intrinsic ionic guanidinium unit plays the pivotal role for both self-exfoliation and antibacterial property against both Gram-positive and Gram-negative bacteria. Using such iCONs, we have devised a mixed matrix membrane which could be useful for antimicrobial coatings with plausible medical benefits.

Two-photon-pumped lasers have been regarded as a promising strategy to achieve frequency up-conversion for situations where the condition of phase matching required by conventional approaches cannot be fulfilled. However, their practical applications have been hindered by the lack of materials holding both efficient two-photon absorption and ease of achieving population inversion. Here, we show that this challenge can be tackled by employing colloidal nanocrystals of perovskite semiconductors. We observe highly efficient two-photon absorption (with a cross section of 2.7 × 10(6) GM) in toluene solutions of CsPbBr3 nanocrystals that can excite large optical gain (>500 cm(-1)) in thin films. We have succeeded in demonstrating stable two-photon-pumped lasing at a remarkable low threshold by coupling CsPbBr3 nanocrystals with microtubule resonators. Our findings suggest perovskite nanocrystals can be used as excellent gain medium for high-performance frequency-up-conversion lasers toward practical applications.

Exploration of heterogeneous molecular catalysts combining the atomic-level tunability of molecular structures and the practical handling advantages of heterogeneous catalysts represents an attractive approach to developing high-performance catalysts for important and challenging chemical reactions such as electrochemical carbon dioxide reduction which holds the promise for converting emissions back to fuels utilizing renewable energy. Thus, far, efficient and selective electroreduction of CO2 to deeply reduced products such as hydrocarbons remains a big challenge. Here, we report a molecular copper-porphyrin complex (copper(II)-5,10,15,20-tetrakis(2,6-dihydroxyphenyl)porphyrin) that can be used as a heterogeneous electrocatalyst with high activity and selectivity for reducing CO2 to hydrocarbons in aqueous media. At -0.976 V vs the reversible hydrogen electrode, the catalyst is able to drive partial current densities of 13.2 and 8.4 mA cm(-2) for methane and ethylene production from CO2 reduction, corresponding to turnover frequencies of 4.3 and 1.8 molecules·site(-1)·s(-1) for…

The development of functional solid-state materials for carbon capture at low carbon dioxide (CO2) concentrations, namely, from confined spaces (<0.5%) and in particular from air (400 ppm), is of prime importance with respect to energy and environment sustainability. Herein, we report the deliberate construction of a hydrolytically stable fluorinated metal-organic framework (MOF), NbOFFIVE-1-Ni, with the appropriate pore system (size, shape, and functionality), ideal for the effective and energy-efficient removal of trace carbon dioxide. Markedly, the CO2-selective NbOFFIVE-1-Ni exhibits the highest CO2 gravimetric and volumetric uptake (ca. 1.3 mmol/g and 51.4 cm(3) (STP) cm(-3)) for a physical adsorbent at 400 ppm of CO2 and 298 K. Practically, NbOFFIVE-1-Ni offers the complete CO2 desorption at 328 K under vacuum with an associated moderate energy input of 54 kJ/mol, typical for the full CO2 desorption in conventional physical adsorbents but considerably lower than chemical sorbents. Noticeably, the contracted square-like channels, affording the close proximity of the fluorine…

Circularly polarized (CP) light is of interest in areas such as quantum optical computing, optical spintronics, biomedicine, and high efficiency displays. Direct emission of CP light from organic light-emitting diodes (OLEDs) has been a focus of research as it has the immediate application of increasing efficiency and simplifying device architecture in OLED based displays. High dissymmetry (gEL) factor values have been reported for devices employing fluorescent polymers, but these CP-OLEDs are limited in their ultimate efficiencies by the type of emissive electronic transitions involved. In contrast, phosphorescent OLEDs (PHOLEDs) can emit light from triplet excited states and can therefore achieve very high efficiencies. However, CP-PHOLEDs are significantly understudied, and the two previous reports suffered from very low brightness or gEL values. Here, we use a platinahelicene complex to construct a CP-PHOLED that achieves both a display level brightness and a high gEL factor. The dissymmetry of CP emission reached with this proof-of-concept single-layer helicene-based device is…

Nanotechnology-mediated antioxidative therapy is emerging as a novel strategy for treating a myriad of important diseases through scavenging excessive reactive oxygen and nitrogen species (RONS), a mechanism critical in disease development and progression. However, similar to antioxidative enzymes, currently studied nanoantioxidants have demonstrated scavenging activity to specific RONS, and sufficient antioxidative effects against multiple RONS generated in diseases remain elusive. Here we propose to develop bioinspired melanin nanoparticles (MeNPs) for more potent and safer antioxidative therapy. While melanin is known to function as a potential radical scavenger, its antioxidative mechanisms are far from clear, and its applications for the treatment of RONS-associated diseases have yet to be well-explored. In this study, we provide for the first time exhaustive characterization of the activities of MeNPs against multiple RONS including O 2 •–, H 2 O 2, • OH, • NO, and ONOO –, the main toxic RONS generated in diseases. The potential of MeNPs for antioxidative therapy has also been…

Postsynthetic ion exchange of [Co2(μ-Cl)2(btta)] (MAF-X27-Cl, H2bbta =1H,5H-benzo(1,2-d:4,5-d')bistriazole) possessing open metal sites on its pore surface yields a material [Co2(μ-OH)2(bbta)] (MAF-X27-OH) functionalized by both open metal sites and hydroxide ligands, giving drastically improved electrocatalytic activities for the oxygen evolution reaction (an overpotential of 292 mV at 10.0 mA cm(-2) in 1.0 M KOH solution). Isotope tracing experiments further confirm that the hydroxide ligands are involved in the OER process to provide a low-energy intraframework coupling pathway.

Metal sulfides are highly active photocatalysts for water reduction to form H2 under visible light irradiation, whereas they are unfavorable for water oxidation to form O2 because of severe self-photooxidation (i.e., photocorrosion). Construction of a Z-scheme system is a useful strategy to split water into H2 and O2 using such photocorrosive metal sulfides because the photogenerated holes in metal sulfides are efficiently transported away. Here, we demonstrate powdered Z-schematic water splitting under visible light and simulated sunlight irradiation by combining metal sulfides as an H2-evolving photocatalyst, reduced graphene oxide (RGO) as an electron mediator, and a visible-light-driven BiVO4 as an O2-evolving photocatalyst. This Z-schematic photocatalyst composite is also active in CO2 reduction using water as the sole electron donor under visible light.

There have been breakthroughs in the development of covalent organic frameworks (COFs) with tunability of composition, structure, and function, but the synthesis of chiral COFs remains a great challenge. Here we report the construction of two-dimensional COFs with chiral functionalities embedded into the frameworks by imine condensations of enantiopure TADDOL-derived tetraaldehydes with 4,4'-diaminodiphenylmethane. Powder X-ray diffraction and computer modeling together with pore size distribution analysis show that one COF has a twofold-interpenetrated grid-type network and the other has a non-interpenetrated grid network. After postsynthetic modification of the chiral dihydroxy groups of TADDOL units with Ti(O(i)Pr)4, the materials are efficient and recyclable heterogeneous catalysts for asymmetric addition of diethylzinc to aldehydes with high enantioselectivity. The results reported here will greatly expand the scope of materials design and engineering for the creation of new types of functional porous materials.

The development of efficient water oxidation catalysts based on inexpensive and Earth-abundant materials is a prerequisite to enabling water splitting as a feasible source of alternative energy. In this work, we report the synthesis of ternary cobalt manganese phosphide nanoparticles from the solution-phase reaction of manganese and cobalt carbonyl complexes with trioctylphosphine. The CoMnP nanoparticles (ca. 5 nm in diameter) are nearly monodisperse and homogeneous in nature. These CoMnP nanoparticles are capable of catalyzing water oxidation at an overpotential of 0.33 V with a 96% Faradaic efficiency when deposited as an ink with carbon black and Nafion. A slight decrease in activity is observed after 500 cycles, which is ascribed to the etching of P into solution, as well as the oxidation of the surface of the nanoparticles. Manganese-based ternary phosphides represent a promising new system to explore for water oxidation catalysis.

An asymmetric decarboxylative Csp(3)-Csp(2) cross-coupling has been achieved via the synergistic merger of photoredox and nickel catalysis. This mild, operationally simple protocol transforms a wide variety of naturally abundant α-amino acids and readily available aryl halides into valuable chiral benzylic amines in high enantiomeric excess, thereby producing motifs found in pharmacologically active agents.

Abstract An iridium photocatalyst and visible light facilitate a room temperature, nickel-catalyzed coupling of (hetero)aryl bromides with activated α-heterosubstituted or benzylic C(sp3)–H bonds. Mechanistic investigations on this unprecedented transformation have uncovered the possibility of an unexpected mechanism hypothesized to involve a Ni–Br homolysis event from an excited-state nickel complex. The resultant bromine radical is thought to abstract weak C(sp3)–H bonds to generate reactive alkyl radicals that can be engaged in Ni-catalyzed arylation. Evidence suggests that the iridium photocatalyst facilitates nickel excitation and bromine radical generation via triplet–triplet energy transfer.

Platinum catalysts are extensively used in the chemical industry and as electrocatalysts in fuel cells. Pt is notorious for its sensitivity to poisoning by strong CO adsorption. Here we demonstrate that the single-atom alloy (SAA) strategy applied to Pt reduces the binding strength of CO while maintaining catalytic performance. By using surface sensitive studies, we determined the binding strength of CO to different Pt ensembles, and this in turn guided the preparation of PtCu alloy nanoparticles (NPs). The atomic ratio Pt:Cu = 1:125 yielded a SAA which exhibited excellent CO tolerance in H2 activation, the key elementary step for hydrogenation and hydrogen electro-oxidation. As a probe reaction, the selective hydrogenation of acetylene to ethene was performed under flow conditions on the SAA NPs supported on alumina without activity loss in the presence of CO. The ability to maintain reactivity in the presence of CO is vital to other industrial reaction systems, such as hydrocarbon oxidation, electrochemical methanol oxidation, and hydrogen fuel cells.

Hard carbons attract myriad interest as anode materials for high-energy rechargeable batteries due to their low costs and high theoretical capacities; practically, they deliver unsatisfactory performance due to their intrinsically disordered microarchitecture. Here we report a facile ion-catalyzed synthesis of a phenol–formaldehyde resin-based hard-carbon aerogel that takes advantage of the chelation effect of phenol and Fe 3+, which consists of a three-dimensionally interconnected carbon network embedded with hydrogen-rich, ordered microstructures of expanded nanographites and carbon micropores. The chelation effect ensures the homodispersion of Fe in the polymer segments of the precursor, so that an effective catalytic conversion from sp 3 to sp 2 carbon occurs, enabling free rearrangement of graphene sheets into expanded nanographite and carbon micropores. The structural merits of the carbon offer chances to achieve lithium/sodium storage performance far beyond that possible with the conventional carbon anode materials, including graphite and mesocarbon microbeads, along with…

Photodynamic therapy (PDT) can destroy local tumors and minimize normal tissue damage, but is ineffective at eliminating metastases. Checkpoint blockade immunotherapy has enjoyed recent success in the clinic, but only elicits limited rates of systemic antitumor response for most cancers due to insufficient activation of the host immune system. Here we describe a treatment strategy that combines PDT by a new chlorin-based nanoscale metal-organic framework (nMOF), TBC-Hf, and a small-molecule immunotherapy agent that inhibits indoleamine 2,3-dioxygenase (IDO), encapsulated in the nMOF channels to induce systemic antitumor immunity. The synergistic combination therapy achieved effective local and distant tumor rejection in colorectal cancer models. We detected increased T cell infiltration in the tumor microenvironment after activation of the immune system with the combination of IDO inhibition by the small-molecule immunotherapy agent and immunogenic cell death induced by PDT. We also elucidated the underlying immunological mechanisms and revealed compensatory roles of neutrophils and…

We report the nontemplated colloidal synthesis of single crystal CsPbBr3 perovskite nanosheets with lateral sizes up to a few micrometers and with thickness of just a few unit cells (i.e., below 5 nm), hence in the strong quantum confinement regime, by introducing short ligands (octanoic acid and octylamine) in the synthesis together with longer ones (oleic acid and oleylamine). The lateral size is tunable by varying the ratio of shorter ligands over longer ligands, while the thickness is mainly unaffected by this parameter and stays practically constant at 3 nm in all the syntheses conducted at short-to-long ligands volumetric ratio below 0.67. Beyond this ratio, control over the thickness is lost and a multimodal thickness distribution is observed.

Peroxynitrite (ONOO – ) is a kind of reactive oxygen species (ROS) with super activity of oxidization and nitration, and overproduction of ONOO – is associated with pathogenesis of many diseases. Thus, accurate detection of ONOO – with high sensitivity and selectivity is imperative for elucidating its functions in health or disease states. Herein we for the first time present a new two-photon ratiometric fluorescent ONOO – probe ( MITO - CC ) based on FRET mechanism by combining rational design strategy and dye-screening approach. MITO - CC, with fast response rate (within 20 s), excellent sensitivity (detection limit = 11.30 nM) and outstanding selectivity toward ONOO –, was successfully applied to ratiometric detection of endogenous ONOO – produced by HepG2/RAW264.7 cells and further employed for imaging oxidative stress in an inflamed mouse model. Therefore, probe MITO - CC could be a potential biological tool to explore the roles of ONOO – under different physiological and pathological settings.

Development of "smart" noninvasive bioimaging probes for trapping specific enzyme activities is highly desirable for cancer therapy in vivo. Given that β-galactosidase (β-gal) is an important biomarker for cell senescence and primary ovarian cancers, we design an enzyme-activatable ratiometric near-infrared (NIR) probe (DCM-βgal) for the real-time fluorescent quantification and trapping of β-gal activity in vivo and in situ. DCM-βgal manifests significantly ratiometric and turn-on NIR fluorescent signals simultaneously in response to β-gal concentration, which makes it favorable for monitoring dynamic β-gal activity in vivo with self-calibration in fluorescent mode. We exemplify DCM-βgal for the ratiometric tracking of endogenously overexpressed β-gal distribution in living 293T cells via the lacZ gene transfection method and OVCAR-3 cells, and further realize real-time in vivo bioimaging of β-gal activity in colorectal tumor-bearing nude mice. Advantages of our system include light-up ratiometric NIR fluorescence with large Stokes shift, high photostability, and pH independency…

Two kinds of conjugated C3-symmetric perylene dyes, namely, triperylene hexaimides (TPH) and selenium-annulated triperylene hexaimides (TPH-Se), are efficiently synthesized. Both TPH and TPH-Se have broad and strong absorption in the region 300-600 nm together with suitable LUMO levels of about -3.8 eV. Single-crystal X-ray diffraction studies show that TPH displays an extremely twisted three-bladed propeller configuration and a unique 3D network assembly in which three PBI subunits in one TPH molecule have strong π-π intermolecular interactions with PBI subunits in neighboring molecules. The integration of selenophene to TPH endows TPH-Se with a more distorted propeller configuration and a more compact 3D network assembly due to the Se···O interactions. A single-crystal transistor confirms that both TPH and TPH-Se possess good electron-transport ability. TPH and TPH-Se acceptor-based solar cells show high power conversion efficiency of 8.28% and 9.28%, respectively, which mainly results from the combined properties of broad and strong absorption ability, appropriate LUMO level,…

We report a facile nitrogenation/exfoliation process to prepare hybrid Ni–C–N nanosheets. These nanosheets are <2 nm thin, chemically stable, and metallically conductive. They serve as a robust catalyst for the hydrogen evolution reaction in 0.5 M H 2 SO 4, or 1.0 M KOH or 1.0 M PBS (pH = 7). For example, they catalyze the hydrogen evolution reaction in 0.5 M H 2 SO 4 at an onset potential of 34.7 mV, an overpotential of 60.9 mV (at j = 10 mA cm –2 ) and with remarkable long-term stability (∼10% current drop after 70 h testing period). They are promising as a non-Pt catalyst for practical hydrogen evolution reaction.

Driving forces for association between oppositely charged biological or synthetic polymers in aqueous solution have long been identified as electrostatic in origin. This attraction is broken down into an entropic component, due to loss of counterions, and an enthalpic component, stemming from Coulombic attraction between opposite charges. While the balance between entropic and enthalpic contributions shifts according to the conditions, the presence of exotherms or endotherms on mixing, though small, are viewed as signatures of Coulombic interactions which support theories of polyelectrolyte association rooted in continuum electrostatics. Here, a head-to-head comparison is made between mechanisms based on electrostatics and those based on specific ion pairing, or ion exchange. Using a Hofmeister series of counterions for a common polycation, poly(diallyldimethylammonium), enthalpy changes on association with poly(styrenesulfonate) are shown to derive from changes in water perturbation, revealed by Raman scattering studies of water O-H vibrations. The free energy for complexation is…

Recently, the emergence of conductive metal–organic frameworks (MOFs) has given great prospects for their applications as active materials in electronic devices. In this work, a high-quality, free-standing conductive MOF membrane was prepared by an air–liquid interfacial growth method. Accordingly, field-effect transistors (FETs) possessing a crystalline microporous MOF channel layer were successfully fabricated for the first time. The porous FETs exhibited p-type behavior, distinguishable on/off ratios, and excellent field-effect hole mobilities as high as 48.6 cm 2 V –1 s –1, which is even comparable to the highest value reported for solution-processed organic or inorganic FETs.

The combination of two or more reactive centers working in concert on a substrate to facilitate the reaction is now considered state of the art in catalysis, yet there still remains a tremendous challenge. Few heterogeneous systems of this sort have been exploited, as the active sites spatially separated within the rigid framework are usually difficult to cooperate. It is now shown that this roadblock can be surpassed. The underlying principle of the strategy presented here is the integration of catalytic components with excellent flexibility and porous heterogeneous catalysts, as demonstrated by the placement of linear ionic polymers in close proximity to surface Lewis acid active sites anchored on the walls of a covalent organic framework (COF). Using the cycloaddition of the epoxides and CO 2 as a model reaction, dramatic activity improvements have been achieved for the composite catalysts in relation to the individual catalytic component. Furthermore, they also clearly outperform the benchmark catalytic systems formed by the combination of the molecular organocatalysts and…

Herein we present a new structural design of hole-transporting material, Trux-OMeTAD, which consists of a C3h Truxene-core with arylamine terminals and hexyl side-chains. This planar, rigid, and fully conjugated molecule exhibits excellent hole mobility and desired surface energy to the perovskite uplayer. Perovskite solar cells fabricated using the p-i-n architecture with Trux-OMeTAD as the p-layer, show a high PCE of 18.6% with minimal hysteresis.

We describe fuel-free, near-infrared (NIR)-driven Janus mesoporous silica nanoparticle motors (JMSNMs) with diameters of 50, 80, and 120 nm. The Janus structure of the JMSNMs is generated by vacuum sputtering of a 10 nm Au layer on one side of the MSNMs. Upon exposure to an NIR laser, a localized photothermal effect on the Au half-shells results in the formation of thermal gradients across the JMSNMs; thus, the generated self-thermophoresis can actively drive the nanomotors to move at an ultrafast speed, for instance, up to 950 body lengths/s for 50 nm JMSNMs under an NIR laser power of 70.3 W/cm(2). The reversible "on/off" motion of the JMSNMs and their directed movement along the light gradient can be conveniently modulated by a remote NIR laser. Moreover, dynamic light scattering measurements are performed to investigate the coexisting translational and rotational motion of the JMSNMs in the presence of both self-thermophoretic forces and strong Brownian forces. These NIR-powered nanomotors demonstrate a novel strategy for overcoming the necessity of chemical fuels and exhibit a…

Sub-nanometric Pd clusters on porous nanorods of CeO2 (PN-CeO2) with a high Pd dispersion of 73.6% exhibit the highest catalytic activity and best chemoselectivity for hydrogenation of nitroarenes to date. For hydrogenation of 4-nitrophenol, the catalysts yield a TOF of ∼44059 h(-1) and a chemoselectivity to 4-aminophenol of >99.9%. The superior catalytic performance can be attributed to a cooperative effect between the highly dispersed sub-nanometric Pd clusters for hydrogen activation and unique surface sites of PN-CeO2 with a high concentration of oxygen vacancy for an energetically and geometrically preferential adsorption of nitroarenes via nitro group. The high concentration of surface defects of PN-CeO2 and large Pd dispersion contribute to the enhanced catalytic activity for the hydrogenation reactions. The high chemoselectivity is mainly governed by the high Pd dispersion on the support. The catalysts also deliver high catalytic activity and selectivity for nitroaromatics with various reducible substituents into the corresponding aminoarenes.

A metal-free organic semiconductor of mesoporous graphitic carbon nitride (C3N4) coupled with a Ru(II) binuclear complex (RuRu') containing photosensitizer and catalytic units selectively reduced CO2 into HCOOH under visible light (λ > 400 nm) in the presence of a suitable electron donor with high durability, even in aqueous solution. Modification of C3N4 with Ag nanoparticles resulted in a RuRu'/Ag/C3N4 photocatalyst that exhibited a very high turnover number (>33000 with respect to the amount of RuRu'), while maintaining high selectivity for HCOOH production (87-99%). This turnover number was 30 times greater than that reported previously using C3N4 modified with a mononuclear Ru(II) complex, and by far the highest among the metal-complex/semiconductor hybrid systems reported to date. The results of photocatalytic reactions, emission decay measurements, and time-resolved infrared spectroscopy indicated that Ag nanoparticles on C3N4 collected electrons having lifetimes of several milliseconds from the conduction band of C3N4, which were transferred to the excited state of RuRu',…

The catalytic dehydrogenative coupling of alcohols and amines to form aldimines represents an environmentally benign methodology in organic chemistry. This has been accomplished in recent years mainly with precious-metal-based catalysts. We present the dehydrogenative coupling of alcohols and amines to form imines and H2 that is catalyzed, for the first time, by a complex of the earth-abundant Mn. Detailed mechanistic study was carried out with the aid of NMR spectroscopy, intermediate isolation, and X-ray analysis.