The 100 most-cited articles in Physical Chemistry Chemical Physics, 2019

The use of alternating current (AC) magnetometry to measure magnetic relaxation times is one of the most fundamental measurements for characterising single-molecule magnets (SMMs). These measurements, performed as a function of frequency, temperature and magnetic field, give vital information on the underlying magnetic relaxation process(es) occurring in the material. The magnetic relaxation times are usually fitted to model functions derived from spin-phonon coupling theories that allow characterisation of the mechanisms of magnetic relaxation. The parameters of these relaxation models are then often compared between different molecules in order to find trends with molecular structure that may guide the field to the next breakthrough. However, such meta-analyses of the model parameters are doomed to over-interpretation unless uncertainties in the model parameters can be quantified. Here we determine a method for obtaining uncertainty estimates in magnetic relaxation times from AC experiments, and provide a program called CC-FIT2 for fitting experimental AC data as well as the…

The Lennard-Jones 12-6 potential is widely used in simulations… or is it? We propose reconsidering when to use it.

peak can be used as the internal calibration standard for all considered samples. Furthermore, different oxygen species were unambiguously identified by matching the oxygen 1s binding energies from the in situ measurements and first principles predictions.

Based on the biochemical theory of multiple ligand-receptor complexes (Klotz (1946)) a sigmoidal proceeding adsorption isotherm is derived. The special case of an arbitrarily large number of equal interaction sites and a separate one yields an equation which corresponds to the ζ-isotherm, disparately derived by Ward et al. (2007) for surface tension of solid-fluid interfaces. From the mathematical point of view it is analogous to the BET-isotherm for a limited number of adsorption layers (1938). It is shown that the isotherm maps type IV and V isotherms. The isotherm is compared with others including the type IV isotherm of Do and Do (2009). The present isotherm is unified in contrast to existing hybrid models. It is successfully applied to numerous literature data concerning the adsorption of water on microporous carbon and aluminophosphate molecular sieves.

Reactive molecular dynamics (MD) simulation makes it possible to study the reaction mechanism of complex reaction systems at the atomic level. However, the analysis of MD trajectories which contain thousands of species and reaction pathways has become a major obstacle to the application of reactive MD simulation in large-scale systems. Here, we report the development and application of the Reaction Network Generator (ReacNetGenerator) method. It can automatically extract the reaction network from the reaction trajectory without any predefined reaction coordinates and elementary reaction steps. Molecular species can be automatically identified from the cartesian coordinates of atoms and the hidden Markov model is used to filter the trajectory noises which makes the analysis process easier and more accurate. The ReacNetGenerator has been successfully used to analyze the reactive MD trajectories of the combustion of methane and 4-component surrogate fuel for rocket propellant 3 (RP-3), and it has great advantages in terms of efficiency and accuracy compared to traditional manual…

For the development of safe and long-lasting lithium-ion batteries we need electrolytes with excellent ionic transport properties. Argyrodite-type Li6PS5X (X: Cl, Br, I) belongs to a family of such a class of materials offering ionic conductivities, at least if Li6PS5Br and Li6PS5Cl are considered, in the mS cm-1 range at room temperature. Although already tested as ceramic electrolytes in battery cells, a comprehensive picture about the ion dynamics is still missing. While Li6PS5Br and Li6PS5Cl show an exceptionally high Li ion conductivity, that of Li6PS5I with its polarizable I anions is by some orders of magnitude lower. This astonishing effect has not been satisfactorily understood so far. Studying the ion dynamics over a broad time and length scale is expected to help shed light on this aspect. Here, we used broadband impedance spectroscopy and 7Li NMR relaxation measurements and show that very fast local Li ion exchange processes are taking place in all three compounds. Most importantly, the diffusion-induced NMR spin-lattice relaxation in Li6PS5I is almost identical to that…

system could be modified with tailored optical and magnetic properties for functional applications such as magneto-optics and optoelectronic devices.

The Janus structure, by combining properties of different transition metal dichalcogenide (TMD) monolayers in a single polar material, has attracted increasing research interest because of its particular structure and potential application in electronics, optoelectronics and piezoelectronics. In this work, Janus SnSSe monolayer is predicted by means of first-principles calculations, and it exhibits dynamic and mechanical stability. By using the generalized gradient approximation (GGA) and spin-orbit coupling (SOC), the Janus SnSSe monolayer is found to be an indirect band-gap semiconductor, whose gap can easily be tuned by strain. High carrier mobilities are obtained for SnSSe monolayer, and the hole mobility is higher than the electron mobility. For SnSSe monolayer, a uniaxial strain in the basal plane can induce both strong in-plane and much weaker out-of-plane piezoelectric polarizations, which reveals the potential as a piezoelectric two-dimensional (2D) material. High absorption coefficients in the visible light region are observed, suggesting a potential photocatalytic…

Raman spectroscopy is the tool of choice in the physicochemical investigation of carbon nanomaterials. However, Raman analysis of graphene oxide (GO) is lagging in comparison to the rich information gained in the case of carbon nanotubes and graphene. Here, we carried out a joint current sensing atomic force microscopy (CSAFM) and Raman spectroscopy investigation of laser-reduced GO. Reduced graphene oxide (rGO) was obtained under different laser powers in the range from 0.1 to 10 mW (532 nm). We compare the Raman spectra and the electrical conductivity at the nanoscale obtained by current sensing atomic force microscopy. Our analysis shows that three bands in the second-order region (2D, D + G, 2G), in the range from 2500 to 3200 cm-1, are uniquely sensitive to the degree of reduction. Moreover, we found that the changes in peak area ratios AD+G/AD and A2G/AD show a direct correlation with the electrical resistance of rGO. We establish an optical micro-spectroscopy way to assess the degree of reduction in laser-reduced GO. These new insights provide a convenient and useful way to…

The selective catalytic reduction technique for automotive applications depends on ammonia production from a urea-water solution via thermolysis and hydrolysis. In this process, undesired liquid and solid by-products are formed in the exhaust pipe. The formation and decomposition of these by-products have been studied by thermogravimetric analysis and differential scanning calorimetry. A new reaction scheme is proposed that emphasizes the role of thermodynamic equilibrium of the reactants in liquid and solid phases. Thermodynamic data for triuret have been refined. The observed phenomenon of liquefaction and re-solidification of biuret in the temperature range of 193-230 °C is explained by formation of a eutectic mixture with urea.

Janus monolayers and their van der Waals heterostuctures are investigated by hybrid density functional theory calculations. MoSSe, WSSe, MoSeTe and WSeTe are found to be direct band gap semiconductors. External electric fields are used to transform indirect MoSTe and WSTe to direct band gap semiconductors. MoSSe-WSSe, MoSeTe-WSeTe and MoSTe-WSTe vdW heterostructures are also indirect band gap semiconductors with type-II band alignment. Similar to the corresponding monolayers, in some of the above mentioned vdW heterostructures an external electric field and tensile strain can transform indirect to direct band gaps, while sustaining type-II band alignment. Janus monolayers have lower values of the work function (φ) than their vdW heterostructure counterparts. Furthermore, absorption spectra, absorption efficiency, and valence(conduction) band edge potentials are calculated to understand the optical and photocatalytic behavior of these systems. Red and blue shifts are observed in the position of excitonic peaks due to the induced strain in Janus monolayers. Strong device absorption…

Two-dimensional CrI3 has attracted much attention as it is reported to be a ferromagnetic semiconductor with a Curie temperature of around 45 K. By performing first-principles calculations, we find that the magnetic ground state of CrI3 is variable under biaxial strain. Our theoretical investigations show that the ground state of monolayer CrI3 is ferromagnetic under compression, but becomes antiferromagnetic under tension. Particularly, the transition occurs under a feasible in-plane strain of around 1.8%. Accompanied by the transition of the magnetic ground state, CrI3 undergoes a transition from magnetic-metal to half-metal to half-semiconductor to spin-relevant semiconductor when the strain varies from -15% to 10%. We attribute these transitions to the variation of the d-orbitals of Cr atoms and the p-orbitals of I atoms. Generally, we report a series of magnetic and electronic phase transitions in strained CrI3, which will help both theoretical and experimental researchers in further understanding the tunable electronic and magnetic properties of CrI3 and its analogs.

This work revises some anomalous cases reported in the literature, which seemingly violate Kasha's rule. To the contrary, apart from azulene, the remaining molecules fulfill Kasha's rule. Kasha's rule must be stated just as in the seminal paper (M. Kasha, Discuss. Faraday Soc., 1950, 9, 14-19): "The emitting electronic level of a given multiplicity is the lowest excited level of that multiplicity". Therefore, Kasha's rule focuses on the emission (photophysics) for complex molecules, in condensed phase, for the absorption of one photon per molecule under photostationary conditions, then a rapid internal conversion and a vibrational relaxation warrant that the corresponding emission comes from the first excited electronic level regardless of which electronic state of equal multiplicity is excited.

. The interactions between interlayer species and the host layer or the interlayer water molecules are mainly derived from the electrostatic interactions. The main components of the valence band maximum (VBM) and conduction band minimum (CBM) of MgAl-LDHs are derived from p orbitals of halogen anions or the O-2p orbitals of other anions, and the Mg-2p orbital, respectively. This illustrates that the most basic sites of MgAl-LDHs are the interlayer anions rather than the hydroxyl group in the layer, while the most acidic sites are Mg in the layers. And LDHs containing anions with higher charge show stronger basicity. The calculation results agree well with the experimental findings. This work provides effective theoretical information for the design and preparation of the anion-controlled functional LDHs or related materials with prospective applications.

Deep eutectic solvents (DESs) are one type of green solvents. Most of the DESs could absorb water from air. However, even a trace amount of water can affect the chemical structure and physical properties of DESs. To date, no study has been reported on the hygroscopicity of DESs. Consequently, in this study, a comprehensive investigation was performed on the capacity, kinetics, mechanism, and furthermore the dynamic process (by PCMW2D-COS IR spectra) of atmospheric water absorption from air by DESs. The results show that most DESs are highly hygroscopic. Surface absorption enhances the overall water absorption capacity by DESs in spite of decreasing the initial water absorption rate. In the beginning, the water absorption increases with an increase in the number of hydrophilic groups in DESs due to the retained DES nanostructure during this period. Therefore, DESs with more hydrophilic groups (ChCl:glucose than ChCl:xylitol) possess a higher water absorption initial rate. However, when the water absorption capacity is high, the hindrance from the H-bond strength from inner DESs needs…

The electric double layer formation of supercapacitors is governed by ion electrosorption at the electrode surface. Large surface areas are beneficial for the energy storage process, typically achieved by carbon electrode materials. It is a matter of debate whether pores provide the same contribution to the capacitance regardless of the size, or if subnanometer pores lead to an anomalous increase of capacitance. In our work, we developed a new model for normalized capacitance depending on pore sizes, using a combination of a sandwich type capacitor for micropores and double-cylinder capacitor model for larger pores. Modification factors for each capacitance value were calculated using the nonlinear generalized reduced gradient method to obtain a modified electric sandwich double-cylinder capacitor (ESDCC) model. The model was validated by comparing the measured capacitance values of a set of prepared activated carbons in organic electrolytes with simulated values according to the modified ESDCC model, using combined physisorption data of carbon dioxide and nitrogen. We concluded a…

required to form a given phase, one can ensure every stable phase mixture is included in the Pourbaix diagram and reduce the computational time required to construct the resultant Pourbaix diagram by several orders of magnitude. This new Pourbaix algorithm has been incorporated into the pymatgen code and the Materials Project website, and it extends the ability to evaluate the Pourbaix stability of complex multicomponent systems.

X-ray photoelectron spectroscopy (XPS) of five-monolayer-thick ZrO2 films reveals a core level binding energy difference of up to 1.8 eV between the tetragonal and monoclinic phase. This difference is explained by positively charged oxygen vacancies in the tetragonal films, which are slightly reduced. Due to the large band gap of zirconia (≈5-6 eV), these charges shift the electron levels, leading to higher binding energies of reduced tetragonal films w.r.t. fully oxidized monoclinic films. These core level shifts have the opposite direction than what is usually encountered for reduced transition metal oxides. The vacancies can be filled via oxygen spillover from a catalyst that enables O2 dissociation. This can be either a metal deposited on the film, or, if the film has holes, the metallic (in our case, Rh) substrate. Our study also confirms that tetragonal ZrO2 is stabilized via oxygen vacancies and shows that the XPS binding energy difference between O 1s and Zr 3d solely depends on the crystallographic phase.

Highly active single-atom catalysts (SACs) have recently been intensively studied for their potential in the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER). Due to the existence of many such SAC systems, a general understanding of the trend and designing principle is necessary to discover an optimal SAC system. In this work, by using density functional theory (DFT), we investigated a series of late single transition metals (TM = Fe, Co, Ni, Cu, and Pd) anchored on various N doped graphenes (xN-TM, x = 1-4) as electrocatalysts for both the HER and OER. Solvent effects were taken into account using an implicit continuum model. Our results reveal that the catalytic activity of SACs is determined by the local coordination number of N and TM in the catalysts. Among the considered catalysts, a low-coordinated Co site, i.e. a triple-coordinated Co, exhibits a high catalytic activity toward the HER with a calculated hydrogen adsorption free energy of -0.01 eV, whereas a high-coordinated Co center, i.e. a quadruple-coordinated Co is a promising candidate for the…

The Burstein-Moss (B-M) effect, which suggests that the optical band gap of degenerately doped semiconductors increases when all states close to the conduction band get populated due to shifting of an absorption edge to higher energy, is important, as it gives a chance to obtain different optical properties for the same material. Here, we report our observations of the similar shift in the optical band gap in NixFe2-xO3 nanocomposites as a function of composition with the help of cyclic voltammetry (CV) and XPS valence band (VB) position measurements. The conduction band edge (CBE) position of the NixFe2-xO3 nanocomposites as determined using CV was noted to move towards more negative potential with increasing Ni-concentration. A similar shift is also noted in the CBE estimated using XPS measurements (by subtracting the VB position from the optical band gap values). The observed shift in the optical band gap along with the CBE position gives the corresponding shift in the Fermi level, which is found to move closer to the CBE position, suggesting the observation of an effect similar…

A significant number of protein-protein interactions (PPIs) are mediated through the interactions between proteins and peptide segments, and therefore determination of protein-peptide interactions (PpIs) is critical to gain an in-depth understanding of the PPI network and even design peptides or small molecules capable of modulating PPIs. Computational approaches, especially molecular docking, provide an efficient way to model PpIs, and a reliable scoring function that can recognize the correct binding conformations for protein-peptide complexes is one of the most important components in protein-peptide docking. The end-point binding free energy calculation methods, such as MM/GBSA and MM/PBSA, are theoretically more rigorous than most empirical and semi-empirical scoring functions designed for protein-peptide docking, but their performance in predicting binding affinities and binding poses for protein-peptide systems has not been systematically assessed. In this study, we first evaluated the capability of MM/GBSA and MM/PBSA with different solvation models, interior dielectric…

We performed a density functional theory (DFT) study on X-ray photoelectron (XPS) and absorption (XAS) spectra of graphitic carbon nitride (g-C3N4) nanosheets at the N and C K-edges. A combined cluster-periodic approach was employed to calculate XPS spectra, in which the core ionic potential (IP) of the solid 2D material was computed by subtracting the work function (obtained with periodic conditions) from the gas phase IP (obtained with large cluster models). With amino-terminated supermolecules of different sizes, we obtained convergent spectra and provide new assignments for 5 nitrogen [1 sp2; 4 sp3 (bridging, tertiary, and primary/secondary amino nitrogens)] and 4 carbon (all bonded with three nitrogens) local structures. A good agreement with experiments was obtained, with the N1s (C1s) main peak position differing by 0.1-0.2 eV (0.5-0.8 eV). Our simulations show that N1s XPS of pure g-C3N4 contains only two major features at 398.6 and 401.2 eV, contributed from sp2-N and sp3-N, respectively. The chemical shifts of all sp3-N are so close (deviating by 0.3-0.6 eV) that terminal…

The selection of a suitable two dimensional anode material is one of the key steps in the development of alkali metal ion batteries to achieve superior performance with an ultrahigh rate of charging/discharging capability. Here, we have used state of the art density functional theory (DFT) to explore the feasibility of two dimensional (2D) honeycomb boron arsenide (h-BAs) as a potential anode for alkali-metal (Li/Na/K)-ion batteries. The structural and dynamic stability has been confirmed from the formation energy and the non-negative phonon frequency. The h-BAs monolayer exhibits negative adsorption-energy values of -0.422, -0.321 and -0.814 eV, for the Li, Na, and K-ions, respectively. Subsequently, during the charging process the adsorption-energy increases considerably without an energy-barrier when any of the A-atoms achieve a crucial distance (∼8 Å). In addition, it has been observed that insertion of the mono alkali metal atom into the h-BAs surface results in the semi-conducting nature of the monolayer being transformed into a metallic-state. The low energy barriers for Li…

We present property-tailored all-electron relativistic Karlsruhe basis sets for the elements hydrogen to radon. The modifications described herein use at most four additional primitive basis functions and re-optimized contraction coefficients of the inner-most segment. Thus, the shielding constants are improved while maintaining the compactness of the basis set. A large set of 255 closed-shell molecules was used to assess the quality of the developed bases throughout the periodic table of elements.

A novel approach to chemical bond analysis for excited states has been developed. Using an extended adaptive natural density partitioning method (AdNDP) as implemented in AdNDP 2.0 code, we obtained chemically intuitive bonding patterns for the excited states of H2O, B5+, and C2H4+ molecules. The deformation pathway in the excited states could be easily predicted based on the analysis of the chemical bond pattern. We expect that this new method of chemical bonding analysis would be very helpful for photochemistry, photoelectron spectroscopy, electron spectroscopy and other chemical applications that involved excited states.

The thermolysis routes of two isostructural metal-organic framework compounds (Zn-based ZIF-8 and Co-based ZIF-67) are investigated based on temperature-dependent and time-dependent in situ Fourier transform infrared (FTIR) spectroscopy and in situ X-ray diffraction data, as well as thermogravimetric-differential scanning calorimetry (TG-DSC) analyses and density functional theory (DFT) calculations. These data highlight thermolysis effects on different vibrations and dissociations within specific atomic moieties. The coordination differences between Zn-N and Co-N lead to the distinct thermolysis routes of ZIF-8 and ZIF-67. ZIF-8 is easily deformed during heating while decomposes at a higher temperature due to the saturated Zn-N coordination. ZIF-67, however, does not deform during heating due to the stronger Co-N bonds, but easily reacts with oxygen due to the unsaturated Co-N bonds. Our results demonstrate that in situ FTIR paired with in situ XRD is a powerful technique for MOF thermolysis investigation, and we suggest that the thermolysis mechanisms of MOFs may be unveiled by…

The two-electron electrochemical oxidation of dopamine is studied voltammetrically at gold macroelectrodes around neutral pH with simulations used to give kinetic and mechanistic data. In particular, the system shows "potential inversion" in which the thermodynamic oxidation potential of dopamine to form the corresponding semi-quinone formation occurs at a more positive potential than that of the oxidation of the semi-quinone to the quinone form. The use of Tafel slopes measured from the voltammograms as a function of the voltage scan rate is show to be a particularly sensitive indicator of mechanism showing the effect of the follow-up chemistry in which the two-electron oxidation product undergoes an irreversible cyclization reaction.

Hematite (α-Fe2O3) is a widely investigated photocatalyst material for the oxygen evolution reaction, a key step in photoelectrochemical water splitting. Having a suitable band gap for light absorption, being chemically stable and based on earth abundant elements, hematite is a promising candidate for the fabrication of devices able to split water using sunlight. What limits its performance is the high rate of bulk recombination following the optical excitation, so that few charge carriers are able to reach the surface to perform the redox reactions. In an effort to better understand the light absorption properties of hematite, in this work we perform a theoretical first-principles investigation of its band structure and optical absorption properties. We use state-of-the-art many-body perturbation theory, including the effects of electron-hole interaction by solving the Bethe-Salpeter equation. Our approach provides good agreement with the available photoemission and absorption measurements and shows that the onset of light absorption is mostly due to ligand-to-metal charge transfer…

The accuracy of relative spin-state energetics predicted by selected quantum chemistry methods: coupled cluster theory at the CCSD(T) level, multiconfigurational perturbation theory (CASPT2, NEVPT2), multireference configuration interaction at the MRCISD+Q level, and a number of DFT methods, is quantitatively evaluated by comparison with the experimental data of four octahedral iron complexes. The available experimental data, either spin-forbidden transition energies or spin crossover enthalpies, are corrected for relevant environmental effects in order to derive the quantitative benchmark set of iron spin-state energetics. Comparison of theory predictions with the resulting reference data: (1) validates the high accuracy of the CCSD(T) method, particularly when based on Kohn-Sham orbitals, giving the maximum error below 2 kcal mol-1 and the mean absolute error (MAE) below 1 kcal mol-1; (2) corroborates the tendency of CASPT2 to systematically overstabilize higher-spin states by up to 5.5 kcal mol-1; (3) confirms that the latter problem is partly remedied by the recently proposed…

The development of lithium-sulfur (Li-S) batteries is hindered by capacity loss due to lithium polysulfide (LIPS) dissolution into electrolyte solutions (known as the "shuttle effect"). MXenes with excellent electrical conductivity, high mechanical strength and multiple possible active two-dimensional surface terminations are attracting much attention as anchoring materials of Li-S batteries. Here, the S-functionalized V2C (V2CS2) is designed and demonstrated to have not only dynamic and thermal stability, but also metallic character. Compared with bare V2C and V2CO2, V2CS2 exhibits a moderate adsorption effect to suppress the "shuttle effect" and can preserve the structure of LIPSs without any decomposition. Moreover, the metallic properties of V2CS2 are maintained after LIPSs are adsorbed, which can promote the electrochemical activity during the charge and discharge process. The low energy barriers of Li2S decomposition and Li diffusion on the V2CS2 surface promise the phase transformation of LIPSs and assist the electrochemical process. Based on these remarkable results, we can…

The thermodynamically unstable binary graphite intercalation compounds (GICs) with Na remain a main drawback preventing the implementation of Na-ion batteries in the market. In order to shed some light on the origin of Na-GICs instability, we investigate the structure and the energetics of different alkali metal (AM)-GICs by means of density functional theory (DFT) calculations with dispersion correction. We carefully consider different stages of AM-GICs for various AM concentrations and compare the results for Li, Na and K intercalation into graphite. In order to understand the compound stability, we investigated the interplay between the binding energy and the structural deformation due to the presence of AMs in graphite. Whereas the structural deformation energy linearly increases with the size of alkali metal ions, the binding energy passes through a maximum for Na-GIC. The analysis of different contributions to the binding energy allows to conclude that the alkali metal trend is broken for Li-GICs, not for Na-GICs. The high capacity for Li-GIC is a result of the small ion size…

Recently, MnBi2Te4 has been discovered as the first intrinsic antiferromagnetic topological insulator (AFM TI), and it will become a promising material to discover exotic topological quantum phenomena. In this work, we have realized the successful synthesis of high-quality MnBi2Te4 single crystals by solid-state reactions. The as-grown MnBi2Te4 single crystal exhibits a van der Waals layered structure, which is composed of septuple Te-Bi-Te-Mn-Te-Bi-Te sequences as determined by X-ray diffraction and high-resolution high-angle annular dark field scanning transmission electron microscopy (HAADF-STEM). The magnetic order below 25 K as a consequence of A-type antiferromagnetic interaction between Mn layers in the MnBi2Te4 crystal suggests the unique interplay between antiferromagnetism and topological quantum states. Moreover, the transport measurements of MnBi2Te4 single crystals further confirm its magnetic transition. This study on the first AFM TI of MnBi2Te4 will guide the future research on other potential candidates in the MBixTey family (M = Ni, V, Ti, etc.).

We performed first-principles calculations of the structural, electronic, and optical properties of heterostructures which consist of transition metal dichalcogenides MX2 (M = Mo, W; X = S) stacked with Mg(OH)2. All the heterostructures are formed by van der Waals forces. The MoS2/Mg(OH)2 and WS2/Mg(OH)2 vdW heterostructures were found to be semiconductors with indirect bandgaps and possess intrinsic type-II band alignment. In particular, a comparison of the band edge positions with the redox potential of water indicates that the heterostructures are potential photocatalysts for water splitting, enabling water reduction on the MX2 layer and water oxidation on the Mg(OH)2 layer. Moreover, the photogenerated charges will be effectively separated in the presence of a large built-in electric field across the interface. In addition, all of the MX2/Mg(OH)2 heterostructures show strong optical absorption in the visible and infrared regions, indicating their promise for application in photocatalytic water splitting.

Recent studies have shown that the two-dimensional semiconductor Bi2O2Se is a promising thermoelectric (TE) material, whereas its TE performance needs to be further improved. By using first-principles methods combined with semi-classical Boltzmann transport theory, we systemically investigate the effects of biaxial strain on the TE transport properties of Bi2O2Se monolayer. Under -2-2% strain, the maximum power factors of 3.63-3.79 and 1.43-1.79 mW m-1 K-2 are found for p-type and n-type doped Bi2O2Se monolayer, respectively. The figure of merit ZT of p-type doped Bi2O2Se monolayer is enhanced to 1.14 by 2% tensile strain at 300 K and it reaches as high as 4.22 at 800 K (as compared with the highest value of 1.42 for bulk Bi2O2Se at 800 K). This study demonstrates that the TE performance of Bi2O2Se can be significantly improved by application of tensile strain and the Bi2O2Se monolayer has great potential as a TE material.

The intercalation process of binding doxorubicin (DOX) in DNA is studied by extensive MD simulations. Many molecular factors that control the binding affinity of DOX to DNA to form a stable complex are inspected and quantified by employing continuum solvation models for estimating the binding free energy. The modified MM-PB(GB)SA methodology provides a complete energetic profile of ΔGele, ΔGvDW, ΔGpolar, ΔGnon-polar, TΔStotal, ΔGdeform, ΔGcon, and ΔGion. To identify the sequence specificity of DOX, two different DNA sequences, d(CGATCG) or DNA1 and d(CGTACG) or DNA2, with one molecule (1 : 1 complex) or two molecule (2 : 1 complex) configurations of DOX were selected in this study. Our results show that the DNA deformation energy (ΔGdeform), the energy cost from translational and rotational entropic contributions (TΔStran+rot), the total electrostatic interactions (ΔGpolar-PB/GB + ΔGele) of incorporation, the intramolecular electrostatic interactions (ΔGele) and electrostatic polar solvation interactions (ΔGpolar-PB/GB) are all unfavorable to the binding of DOX to DNA. However, they…

We simulated irreversible aggregation of non-interacting particles and of particles interacting via repulsive and attractive potentials explicitly implementing the rotational diffusion of aggregating clusters. Our study confirms that the attraction between particles influences neither the aggregation mechanism nor the structure of the aggregates, which are identical to those of non-interacting particles. In contrast, repulsive particles form more compact aggregates and their fractal dimension and aggregation times increase with the decrease of the temperature. A comparison of the fractal dimensions obtained for non-rotating clusters of non-interacting particles and for rotating clusters of repulsive particles provides an explanation for the conformity of the respective values obtained earlier in the well established model of diffusion-limited cluster aggregation neglecting rotational diffusion and in experiments on colloidal particles.

Five-coordination Mn–N x experiences a significant increase in ORR catalytic activity due to its moderate binding ability compared with Mn–N 4 and Mn–N 3 .

Mechanical exfoliation techniques are widely used to create high quality graphene samples for analytical use. Increasingly, mechanical methods are used to create large quantities of graphene, yet there is surprisingly little molecular insight into the mechanisms involved. We study the exfoliation of graphene with sticky tape using molecular dynamics. This is made possible by using a recently developed molecular dynamics forcefield, GraFF, to represent graphene's dispersion interactions. For nano-sized flakes we observe two different mechanisms depending on the polymer-adhesive used. A peeling mechanism which mixes shearing and normal mode exfoliation promotes synthesis of graphene rather than many-layered graphite. Armed with this new chemical insight we discuss the experimental methods that could preferentially produce graphene by mechanical exfoliation. We also introduce a mathematical model describing the repeated exfoliation of graphite.

The photocatalytic decomposition of water to produce hydrogen is an important strategy to effectively utilize solar energy and solve the energy crisis. In this study, a highly efficient WP-nanoparticle-modified composite catalyst was successfully prepared. WP nanoparticles have been used as an efficient and acid-stable co-catalyst for the HER owing to their specific electronic structure, metalloid characteristics and catalytic activity. On the one hand, the octahedral spatial structure of UiO-66 not only provides attachment space for CdS and WP nanoparticles, but also effectively reduces the particle size and increases the dispersion of CdS and WP nanoparticles. On the other hand, the potential difference and the matching energy band positions of UiO-66 and CdS provide a feasible thermodynamic path for the transmission of photogenerated electrons. The intimate contact between the abovementioned three compounds resulted in a strong synergistic effect, which improved the efficiency of the photocatalytic H2 production. Under visible-light irradiation, the maximum H2 production in 5 h…

= -0.212). Two enhanced sampling methods (aMD and GaMD) are indeed more efficient for conformational sampling, but they did not improve the binding affinity predictions for protein-protein systems, suggesting that the aMD or GaMD sampling (at least in short timescale simulations) may not be a good choice for the MM/PBSA and MM/GBSA predictions of protein-protein complexes. The solute dielectric constant of 1.0 is recommended to MM/GBSA, but a higher solute dielectric constant is recommended to MM/PBSA, especially for the systems with higher polarity on the protein-protein binding interfaces. Then, a preliminary assessment of the MM/GBSA calculations based on a variable dielectric generalized Born (VDGB) model was conducted. The results highlight the potential power of VDGB in the free energy predictions for protein-protein systems, but more thorough studies should be done in the future.

Li+ ion hopping conduction in highly concentrated solutions of lithium bis(fluorosulfonyl)amide (LiFSA) dissolved in dinitrile solvents, namely succinonitrile, glutaronitrile, and adiponitrile, was investigated. Phase behaviors of the LiFSA/dinitrile binary mixtures assessed by differential scanning calorimetry suggested that LiFSA and the dinitriles form stable solvates in a molar ratio of 1 : 2. For succinonitrile, a glass forming room temperature liquid is formed when [LiFSA]/[succinonitrile] > 1. The corresponding glutaronitrile and adiponitrile mixtures have melting points below 60 °C. The self-diffusion coefficients of Li+, FSA-, and dinitrile measured with pulsed field gradient NMR suggested that Li+ ion diffuses faster than anion and dinitrile in the liquids of composition [LiFSA]/[dinitrile] = 1/0.8, indicating emergence of Li+ ion hopping conduction. X-ray crystallography for the LiFSA-(dinitrile)2 solvates and Raman spectroscopy for the liquids with composition [LiFSA]/[dinitrile] > 1 revealed that the two cyano groups of the dinitrile coordinate to two different Li+ ions…

Arsenene, a single-layer arsenic nanosheet with a honeycomb structure, has recently attracted increasing attention due to its numerous exceptional properties. In this study, density functional theory (DFT) calculations were employed to investigate and compare the interactions of Li, Na and Mg ions with the Arsenene monolayer for the purpose of using it as an anode in lithium, sodium, and magnesium ion rechargeable batteries. The results indicated that the Li, Na and Mg adatoms preferentially adsorbed on the valley sites, with negative adsorption energies of -2.55, -1.91 and -1.10 eV, respectively. This strong binding between the alkali metals and the Arsenene monolayer is an important factor for battery applications. Also, it was found that Arsenene exhibited high theoretical specific capacities of up to 1430 mA h g-1 for Li and Mg and 1073.18 mA h g-1 for Na, which are extremely higher values than those of commercially used graphite anodes (372 mA h g-1) in Li-ion batteries. Furthermore, the diffusion barrier energies of the Li, Na and Mg ions were calculated using the nudged…

In this study, we report two new Mo2B2 monolayers and investigate their stabilities, electronic structures, lattice dynamics, and properties as anode materials for energy storage by using the crystal structure prediction technique and first-principles method. The calculated phonon spectra and electrical structures indicate that our predicted tetragonal and trigonal Mo2B2 (tetr- and tri-Mo2B2) monolayers possess excellent electronic conductivity and great stability. The adsorption energies of Li/Na on them are negative enough to ensure stability and safety under operating conditions. Besides, tetr-Mo2B2 possesses a theoretical specific capacity of ∼251 mA h g-1 for both Li- and Na-ion batteries (LIBs and NIBs), while tri-Mo2B2 possesses ∼251 and ∼188 mA h g-1 for LIBs and NIBs, respectively. The diffusion energy barriers of Li/Na over tetr- (0.029/0.010 eV) and tri- (0.023/0.013 eV) Mo2B2 are very small, indicating their excellent charge/discharge capability. In addition, the low electrode potential of Li/Na-intercalated tetr- and tri-Mo2B2 is beneficial to their performance as anode…

The objective of this investigation was to elaborate on the influence of grain boundaries on the interfacial thermal conductance between bi-crystalline graphene and polyethylene in a nanocomposite. Reverse non-equilibrium molecular dynamics simulations were implemented in combination with Lennard-Jones and reactive force field interatomic potential parameters. According to the simulation results, high-energy grain boundary atoms in bi-crystalline graphene played a substantial role in enhancing the interfacial thermal conductance values. To further illuminate the mechanisms of enhanced graphene-polyethylene interfacial thermal conductance in the presence of grain boundaries, a systematic study on the vibrational density of states and structural evolution was also performed. It was found that the vibrational coupling between bi-crystalline graphene and the polymer was enhanced; whereas a decline in the radial density profile and coordination number resulted in a shifting of the in-plane vibrational modes such that they amalgamated with those of the polyethylene matrix. Thus,…

All-atom molecular dynamics simulations have been used to investigate the adsorption of low molecular weight hyaluronic acid to lipid membranes. We have determined the interactions that govern the adsorption of three different molecular weight hyaluronic acid molecules (0.4, 3.8 & 15.2 kDa) to lipid bilayers that are representative of the surface-active phospholipid bilayers found in synovial joints. We have found that both direct hydrogen bonds and water-mediated interactions with the lipid headgroups play a key role in the binding of hyaluronic acid to the lipid bilayer. The water-mediated interactions become increasingly important in stabilising the adsorbed hyaluronic acid molecules as the molecular weight of hyaluronic acid increases. We also observe a redistribution of ions around bound hyaluronic acid molecules and the associated lipid headgroups, and that the degree of redistribution increases with the molecular weight of hyaluronic acid. By comparing this behaviour to that observed in simulations of the charge-neutral polysaccharide dextran (MW ∼ 15 kDa), we show that this…

The introduction of nitrogen (N) defects (N vacancies labeled as Vns and cyano groups) has been demonstrated as one of the promising strategies to extend the light absorption range of graphitic carbon nitride (CN), thus improving the photocatalytic activity for hydrogen (H2) evolution. However, the photocatalysis mechanism of such N-deficient CN (DCN) has not been fully understood. In this study, N defects are introduced into CN by a KOH-assisted thermal polymerization method. On the basis of experimental investigations and density functional theory (DFT) calculations, it is found that the extension of the absorption range of DCN is attributed to both the valence band (VB) tailing induced by Vns and bandgap narrowing induced by cyano groups. Moreover, the conduction band (CB) is lowered by the N defects, indicating a reduced driving force for H2 evolution. Transient absorption (TA) spectroscopy reveals that when the electrons in the intrinsic VB of DCN are excited to the CB, the separation efficiency of these electrons and as-generated holes is seriously restricted by their low…

This article discusses applications of Bayesian machine learning for quantum molecular dynamics. One particular formulation of quantum dynamics advocated here is in the form of a machine learning simulator of the Schrödinger equation. If combined with the Bayesian statistics, such a simulator allows one to obtain not only the quantum predictions but also the error bars of the dynamical results associated with uncertainties of inputs (such as the potential energy surface or non-adiabatic couplings) into the nuclear Schrödinger equation. Instead of viewing atoms as undergoing dynamics on a given potential energy surface, Bayesian machine learning allows one to formulate the problem as the Schrödinger equation with a non-parametric distribution of potential energy surfaces that becomes conditioned by the desired dynamical properties (such as the experimental measurements). Machine learning models of the Schrödinger equation solutions can identify the sensitivity of the dynamical properties to different parts of the potential surface, the collision energy, angular momentum, external…

reduction reaction). Finally, we highlighted and analyzed the opportunities and challenges in DFT calculations used for electro-catalysis. On the road towards an optimal catalyst, the design of catalysts fused with DFT calculations promises rapid advances in the coming years.

- having band-gaps in the favourable range for photovoltaics (PV). Different possible (100), (110) and (111) surface terminations are investigated for each of these compositions and the atomic relaxations, surface energies and electronic band structures are reported for each termination. To the best of our knowledge, no surface studies have been reported in the literature for any of the halide perovskites present in our database. These studies, therefore, are an important step towards gaining a fundamental understanding of the interfacial properties of perovskites, which can help facilitate further breakthroughs in the PV technology.

Type-II heterostructures are appealing for application in optoelectronics due to their effective separation of photogenerated charge carriers. Based on density functional and many-body perturbation theories, we investigate the MoSe2/blue phosphorene (MoSe2/Blue-P) heterobilayer with three representative stacking configurations. Our calculations indicate that the AA-stacking structure has more thermodynamic and dynamic stability. And it possesses a type-II band alignment with significant band offsets. The band offsets together with an interlayer polarized field will efficiently separate the photogenerated holes and electrons. More interestingly, compared with the MoSe2 monolayer, the MoSe2/Blue-P heterobilayer exhibits a significant enhancement of optical absorption in the range of near-ultraviolet and visible light. Also, the observed interlayer exciton has an impressive binding energy (∼670 meV), suggesting that the radiative recombination can be suppressed by the formation of an interlayer exciton. The predicted maximum energy conversion efficiency of MoSe2/Blue-P can achieve a…

Mg decoration enhanced H 2 binding energy in 2D-C 2 N and found to be a promising H 2 storage medium for mobile applications.

We investigate the charging phenomena of an electric double layer capacitor (EDLC) by conducting both equilibrium and non-equilibrium molecular dynamics (MD) simulations. A graphene electrode and 1-ethyl-3-methylimidazolium thiocyanate ([EMIM]+[SCN]-) ionic liquid were used as a system for the EDLC. We clarify the ionic layer structure and show that an abrupt change of the ionic layers leads to a high differential capacitance of the EDLC. The charging simulations reveal that the charging dynamics of the EDLC is highly dependent on the rearrangement of the ionic layer structure. Particularly, the electrode charge during the charging process is consistent with the perpendicular displacement of ionic liquid molecules. From this property, we analyze the contribution of each molecular ion to the electrode charge stored during charging. Charging of the EDLC is largely dependent on the desorption of the co-ions from the electrode rather than the adsorption of the counter-ions. In addition, the contribution of bulk ions to the charge stored in the EDLC is as important as that of ions…

Using first principles density functional theory, we have studied the interaction mechanism of NO2 and SO2 gas molecules on an MoB2 monolayer, for gas sensing applications. The selectivity for a particular gas by the sensor has been analyzed through electronic structure calculations and adsorption studies. The calculations have been performed by considering the fact that the MoB2 monolayer as a sensing material encounters a change in its electrical properties, when gas molecules with different orientations get adsorbed on the surface. From the density of states study, we find better selectivity for NO2 as compared to SO2, as the latter leaves the electronic structure of the sensing material unaffected. Further, the adsorption curves support the above fact as the larger value of adsorption energy (Ead ∼ -1 eV) for NO2 indicates stronger adsorption. The chemisorptive nature for NO2, in contrast with the relatively weaker physisorption for SO2, additionally supports the fact that NO2 gas has a better perspective for MoB2 sensor application. Charge density plots for each case are in…

Qualitative detection of peroxynitrite/peroxynitrous acid (ONOO-/ONOOH) as one of the key bactericidal agents produced in cold air plasma activated aqueous solutions is presented. We examined the use of the 2,7-dichlorodihydrofluorescein diacetate (H2DCFDA) fluorescent dye to detect ONOO-/ONOOH in plasma activated non-buffered water (PAW) or buffered solution (PAPB) generated by DC-driven self-pulsed transient spark discharge at atmospheric pressure in ambient air. The diagnostic selectivity of H2DCFDA to reactive oxygen and nitrogen species (RONS) typical of plasma activated aqueous solutions was examined by using various scavengers of RONS. This cross-reactivity study showed the highest sensitivity of the H2DCFDA dye to ONOO-/ONOOH. However, besides ONOO-/ONOOH, H2DCFDA also exhibited sensitivity to hypochlorite anions/hypochlorous acid (OCl-/HOCl), showing that for a selective study it is important to have an idea about the possible constituents in the studied solutions. The sensitivity of H2DCFDA to other RONS even in much higher concentrations was negligible. The presence of…

Solar-powered production of hydrogen from water has been pursued as one of the solutions to the global energy crisis. Meanwhile, two-dimensional (2D) materials have attracted significant attention as photocatalysts. In this paper, the geometric structures, electronic band structures, band alignment, and optical properties of two novel van der Waals (vdW) heterostructures based on 2D blue phosphorus (BlueP) and 2D XC (X = Ge, Si) were systematically explored using first-principles calculations. We found that both BlueP/GeC and BlueP/SiC vdW heterostructures possess type-II band structures, which can continuously separate the photogenerated electron-hole pairs. The calculated band-edge positions suggest that the BlueP/SiC and BlueP/GeC vdW heterostructures act as potential photocatalysts for water-splitting at pH 0 and pH 7, respectively. Furthermore, XC acts as an electron-donating layer in the BlueP/XC vdW heterostructure, and the potential drop across the interface can generate a large built-in electric field across the interface; this electric field plays a crucial role in…

(aq) along with attempts to reproduce and understand them using both one-electron models and many-electron quantum chemistry calculations. The overwhelming weight of the evidence continues to support the conventional excluded-volume picture of the aqueous electron.

We revisit the statistical mechanics of charge fluctuations in capacitors. In constant-potential classical molecular simulations, the atomic charges of electrode atoms are treated as additional degrees of freedom which evolve in time so as to satisfy the constraint of fixed electrostatic potential for each configuration of the electrolyte. The present work clarifies the role of the overall electroneutrality constraint, as well as the link between the averages computed within the Born-Oppenheimer approximation and that of the full constant-potential ensemble. This allows us in particular to derive a complete fluctuation-dissipation relation for the differential capacitance, that includes a contribution from the charge fluctuations (around the charges satisfying the constant-potential and electroneutrality constraints) also present in the absence of an electrolyte. We provide a simple expression for this contribution from the elements of the inverse of the matrix defining the quadratic form of the fluctuating charges in the energy. We then illustrate numerically the validity of our…

We have performed a thorough examination of the reorientational relaxation dynamics and the ionic charge transport of three typical deep eutectic solvents, ethaline, glyceline and reline, by using broadband dielectric spectroscopy. Our experiments cover a broad temperature range from the low-viscosity liquid down to the deeply supercooled state, allowing us to investigate the significant influence of glassy freezing on the ionic charge transport in these systems. In addition, we provide evidence for a close coupling of the ionic conductivity in these materials to reorientational dipolar motions, which should be considered when searching for deep eutectic solvents optimized for electrochemical applications.

Transition metal dichalcogenides (TMDs), such as MoS2 and WS2, are promising alternative non-noble metal catalysts to drive the electrocatalytic H2 evolution reaction (HER). However, their catalytic performance is inherently limited by the small number of active sites as well as their poor electrical conductivity. Here, we grow vertically aligned 2H-WS2 on different substrates to expose their edge sites for the HER and introduce a scalable approach to tune these active sites via defect engineering. In a thermal hydrogen treatment procedure, sulfur vacancies and metallic tungsten nanoparticles are formed. The extent of desulfurization, and thus the HER activity, can be tuned via controlling the H2 annealing conditions. The obtained W/WS2-x electrocatalysts are evaluated experimentally and theoretically to arrive at a better understanding of how to modify the inherently inert 2H-WS2 for more efficient HER.

Cesium lead mixed-halide perovskite thin films were fabricated by using a chemical vapor anion exchange procedure. Optical and structural properties of the materials obtained were studied comprehensively.

The physics of thermal transport in polymers is important in many applications, such as in heat exchangers and electronics packaging. Even though thermal conductivity models for amorphous polymers have been reported since the 1970s, none of the published models included the chain conformation and chain stiffness effects. In this study, we use molecular dynamics (MD) simulations to study the chain length effect on thermal conductivity of amorphous polyethylene (PE), and the number of repeating C2H4 units ranges from 5 to 200. The total thermal conductivity is decomposed into its contributions from energy convection (k-convection), and heat transfer through nonbonding (k-nonbonding) and bonding (k-bonding) interactions. Each part of the contributions is fitted empirically by using a scaling relationship: k-convection (Einstein's diffusion coefficient model), k-nonbonding ∝ n (Choy's model) and k-bonding (from this study), where Rg is the radius of gyration, n is the number density, and ξ is the persistence length. Summarizing these three components, we emphasize the chain conformation…

The structure of choline chloride/glycerol (ChCl : Gly) mixtures at two mole fractions (the eutectic χChCl = 0.33 (1 : 2), and a higher χChCl = 0.50 (1 : 1) composition) in the liquid state at 333 K and 1 atm. has been investigated using neutron diffraction coupled with hydrogen/deuterium isotopic substitution. Modelling using the empirical potential structure refinement (EPSR) technique, constrained to the experimental neutron diffraction data, produced structural models at both compositions consistent with the experimental data with an extensive, persistent homo-molecular glycerol hydrogen bonding network at χChCl = 0.33 similar to that present in pure glycerol and suggests that persistence of the latent glycerol hydrogen bonding network is key to formation of the ChCl : Gly deep eutectic solvent. In the choline chloride-rich χChCl = 0.50 composition, significant domain segregation is observed with a dramatic reduction in the extent of the homo-molecular glycerol hydrogen bond network which is replaced by a more homogeneous system-wide hydrogen bonded network incorporating…

Single-atom catalysts present extraordinary catalytic performance towards various reactions. In this work, the possibility of single Co atoms supported by the experimentally available defective two-dimensional boron nitride material (2D-BN) with boron vacancies (Co/BN) as a potential catalyst for the oxygen reduction reaction (ORR) was investigated by density functional theory. Co/BN has a similar active center to the cobalt nitride species, which have been proved to be effective ORR catalysts. It is found that Co atoms bind with the defective 2D-BN strongly to ensure the stability of Co/BN. Moreover, all of the ORR intermediates can be adsorbed on Co/BN. Especially, the HOOH species is found to be unstable and decomposes into two OH species immediately, suggesting that the ORR process occurs on Co/BN only through a direct 4e- pathway. Along the favorable pathway, the reduction of O2 to OOH is the rate-limiting step with a largest activation barrier of 0.30 eV and the maximum free energy change is 0.82 eV. Co/BN exhibits competitive ORR activity with that of CoN3 embedded graphene…

The development of Zn-air batteries with a high energy density of 1350 W h kg-1 is one of the breakthroughs required to achieve a low carbon society. However, morphology control of the Zn negative electrode during charge/discharge (Zn-deposition/stripping) is essential for practical application. Considering the manufacturing process, a simple strategy is preferable. Herein, we employed surfactants as an inhibitor of the formation of mossy and dendrite Zn structures, and studied electrochemical Zn growth from the perspective of the electric charge of the surfactant. Even by using an additive free electrolyte of 0.25 M ZnO + 4 M KOH and with 1 mM sodium dodecyl sulfate (SDS: anionic surfactant) or polyacrylic acid (PAA: non-ionic surfactant), mossy and dendrite formations were unavoidable irrespective of the current density. On the other hand, a cationic surfactant, trimethyloctadecylammonium chloride (STAC), suppressed the shape change and resulted in a smooth and dense morphology. Zeta potential measurements, kinetic current densities observed from Tafel plots, and constant…

Confinement or dimensionality reduction is a novel strategy to reduce the lattice thermal conductivity and, consequently, to improve the thermoelectric conversion performance. Bismuth and tellurium based low-dimensional materials have great potential in this regard. The phonon transport and thermoelectric properties of Bi2Te2X (X = S, Se, Te) monolayers are systematically investigated by employing density functional theory and the Boltzmann transport equation. The calculated lattice thermal conductivity of these 2D systems ranges from ∼1.3 W m-1 K-1 (Bi2Te2Se) to ∼1.5 W m-1 K-1 (Bi2Te3) for a 10 μm system size at room temperature and considering spin-orbit coupling in harmonic force constants. This remarkably low lattice thermal conductivity is attributed to small group velocities and enhanced anharmonic phonon scattering rates. A detailed analysis is presented in terms of mode-level phonon group velocities, anharmonic scattering rates and phonon mean free paths. Our results reveal that the thermal transport in these 2D systems is dominated by in-plane transverse acoustic modes.…

). Apart from some discrepancy in the absolute values of the concentrations, which can be explained by the model, all general trends and observations in our model are in qualitative agreement with experimental data and literature.

The microstructure and low-temperature dielectric properties of lead-free BaFe 0.5 Nb 0.5 O 3 ceramics exhibiting a negative temperature coefficient of resistance behavior.

monolayer, indicating MXenes as a class of strong yet bendable materials. The effective thickness, the critical parameter bridging C and D, of MXenes is determined to be only two-thirds of the average layer spacing. This study provides a fundamental basis for quantifying the rigidity of MXenes at the nanoscale.

A novel vertical non-van der Waals (non-vdW) heterostructure of graphene and hexagonal boron nitride (G/hBN) is realized and its application in direct four-electron oxygen reduction reaction (ORR) in alkaline medium is established. The G/hBN differs from previously demonstrated vdW heterostructures, where it has a chemical bridging between graphene and hBN allowing a direct charge transfer - resulting in high ORR activity. The ORR efficacy of G/hBN is compared with that of graphene-hBN vdW structure and individual layers of graphene and hBN along with that of benchmark platinum/carbon (Pt/C). The ORR activity of G/hBN is found to be on par with Pt/C in terms of current density but with much higher electrochemical stability and methanol tolerance. The onset potential of the G/hBN is found to be improved from 780 mV at a glassy carbon electrode to 930 mV and 940 mV in gold and platinum electrodes, respectively, indicating its substrate-dependent catalytic activity. This opens possibilities of new benchmark catalysts of metals capped with G/hBN atomic layers, where the underneath metal…

In the past few decades great effort has been devoted to the study of water confined in hydrophobic geometries at the nanoscale (tubes and slit pores) due to the multiple technological applications of such systems, ranging from drug delivery to water desalination devices. To our knowledge, neither numerical/theoretical nor experimental approaches have so far reached a consensual understanding of structural and transport properties of water under these conditions. In this work, we present molecular dynamics simulations of TIP4P/2005 water under different nanoconfinements (slit pores or nanotubes, with two degrees of hydrophobicity) within a wide temperature range. It has been found that water is more structured near the less hydrophobic walls, independently of the confining geometries. Meanwhile, we observe an enhanced diffusion coefficient of water in both hydrophobic nanotubes. Finally, we propose a confined Stokes-Einstein relation to obtain the viscosity from diffusivity, whose result strongly differs from the Green-Kubo expression that has been used in previous works. While…

), which is indicative of the non-radiative energy transfer during complexation. Leaving aside the binding study, luteolin showed promising inhibitory effects towards the d-ribose mediated glycation of HEWL as well as towards HEWL fibrillation as studied by fluorescence emission and imaging studies. Excellent correlation with the experimental observations as well as precise location and dynamics of luteolin within the binding site has been obtained from molecular docking and molecular dynamics simulation studies.

The combined effects of doping and biaxial strain explain the transformation of HfO 2 grains into the ferroelectric phase observed during thermal annealing.

The soot nucleation process, defined as the transition from molecular precursors to condensed matter, is the less understood step in the whole soot formation process. The possibility that polycyclic aromatic hydrocarbon (PAH) dimers, especially those containing moderate-sized PAHs, can play a major role in soot nucleation is a very controversial issue. Although PAH dimers have often been considered as potential soot precursors, their formation is not thermodynamically favored at a typical flame temperature, their binding energies being considered too weak to allow them to survive in this environment. Hereby, we report experimental evidence supporting the existence of PAH dimers in the proximity of the soot nucleation region of a methane laminar diffusion flame that gives strong evidence for the nucleation process to be kinetically rather than thermodynamically controlled.

). Through this comparative study, the key trends in properties as a function of composition for a family of complex materials have been identified, allowing appropriate compositions to be selected and tuned for specific applications.

We report on the implementation of Dyson orbitals within the recently introduced frozen-core (fc) core-valence separated (CVS) equation-of-motion (EOM) coupled-cluster singles and doubles (CCSD) method, which enables efficient and reliable characterization of core-level states. The ionization potential (IP) variant of fc-CVS-EOM-CCSD, in which the EOM target states have one electron less than the reference, gives access to core-ionized states thus enabling modeling of X-ray photoelectron spectra (XPS) and its time-resolved variant (TR-XPS). Dyson orbitals are reduced quantities that can be interpreted as correlated states of the ejected/attached electron; they enter the expressions of various experimentally relevant quantities. In the context of photoelectron spectroscopy, Dyson orbitals can be used to estimate the strengths of photoionization transitions. We illustrate the utility of Dyson orbitals and fc-CVS-EOM-IP-CCSD by calculating XPS of the ground state of adenine and TR-XPS of the excited states of uracil.

We study the lattice thermal conductivity of two-dimensional (2D) pentagonal systems, such as penta-silicene and penta-germanene. Penta-silicene has been recently reported, while the stable penta-germanene, made up of another group IV element, is first revealed by our ab initio calculations. We find that both penta-silicene and penta-germanene at room temperature have ultra-low lattice thermal conductivities, κ, of 1.29 W m-1 K-1 and 0.30 W m-1 K-1, respectively. To the best of our knowledge, penta-germanene may have the lowest κ in 2D crystal materials. We attribute the ultra-low κ to the weak phonon harmonic interaction and strong anharmonic scattering. A small phonon group velocity, a small Debye frequency, a large Grüneisen parameter, and a large number of modes available for phonon-phonon interplay together lead to the ultra-low κ of penta-silicene and penta-germanene. These discoveries provide new insight into the manipulation of ultra-low κ in 2D materials and highlight the potential applications of silicon and germanium based high thermoelectric materials.

at pH 9, contact ion pairs were formed. Finally, the remarkable effect of trace metal multivalent cations in the interpretation of experiments is briefly discussed. The results provide exciting new insights into the complex interactions of alkali metal cations with the biophysically relevant carboxylic acid moiety.

We present revised reference values for cell volumes and lattice energies for the widely used X23 benchmark set of molecular crystals by including the effect of thermal expansion. For this purpose, thermally-expanded structures were calculated via the quasi-harmonic approximation utilizing three dispersion-inclusive density-functional approximations. Experimental unit-cell volumes were back-corrected for thermal and zero-point energy effects, allowing now a direct comparison with lattice relaxations based on electronic energies. For the derivation of reference lattice energies, we utilized harmonic vibrational contributions averaged over four density-functional approximations. In addition, the new reference values also take the change in electronic and vibrational energy due to thermal expansion into account. This is accomplished by either utilizing experimentally determined cell volumes and heat capacities, or by relying on the quasi-harmonic approximation. The new X23b reference values obtained this way will enable a more accurate benchmark for the performance of computational…

An exploration of the antioxidant power of curcumin, demethoxycurcumin, and bisdemethoxycurcumin, three natural antioxidants found in Curcuma longa, is reported in this work. We exhaust all structural possibilities leading to intramolecular hydrogen bonding and evaluate 15 isomers in total. Calculations were carried out in the gas phase and in the presence of solvents (water, to mimic biological media, and ethanol, to reproduce experimental assays) following the hydrogen atom transfer (HAT) and single electron transfer (SET) mechanisms. CH3OH-O hydrogen bonds are directly related to the antioxidant power via both mechanisms. We provide evidence to explain the experimental observations and to understand the fundamental factors driving antioxidant activity from a molecular perspective. Noticeably, the solvent enhances the antioxidant power in every case. All structures considered here are predicted to have better antioxidant abilities than phenol, and come very close to or surpass vitamin E.

The catalytic cofactor of the most common form of nitrogenase contains seven irons and one molybdenum bound together by sulfide bonds. Surprisingly, a central carbide has been demonstrated by experiments. Another noteworthy structural component is a large homocitrate ligand. In recent theoretical studies it has been shown that the central carbide is needed as a place for the incoming protons that are necessary parts of a reduction process. It has also been shown that a role for the homocitrate ligand could be that it may be rotated to release one bond to molybdenum. In the present study, the carbide protonation steps are reinvestigated with similar results to those reported before. The actual activation of N2 in the E4 state is an extremely complicated process. It has been found experimentally that two hydrides should leave as H2, in a reductive elimination process, to allow N2 activation in E4 in an easily reversible step. It is here suggested that after H2 is released, it is necessary for the metal cofactor to get rid of one proton. This is achieved by protonating the homocitrate…

(nearly 8.6 times that of the pristine ZIS sample), which rivals or exceeds those of previously-reported ZIS-based photocatalysts under visible light irradiation. Meanwhile, the inherent correlation between surface sulfur vacancies and photocatalytic activities of H-ZIS is also explored. Thus, this work demonstrates the feasibility of enhancing the hydrogen evolution capability of sulfide photocatalysts by the formation of sulfur vacancies through a pressure hydrogenation process.

Alkali borate glasses activated with trivalent europium ions and rooted with gold (Au) nanoparticles (NPs) were prepared involving a selective thermochemical reduction and their applicability as photonic materials was assessed in detail.

We present a combined theoretical and experimental study on the UV-vis spectra of enol-keto (EK) and keto-keto (KK) tautomeric forms of curcumin dissolved in aqueous solution. Solvent effects have been investigated by resorting to the implicit polarizable continuum model (QM/PCM) and non-polarizable and fully polarizable QM/MM approaches, the latter based on the fluctuating charges (FQ) force-field. In particular, all methods are challenged to rationalize the contribution of conformational, electrostatic and polarization effects in the calculation of the vertical excitation spectra of curcumin tautomers. The obtained results highlight that for both tautomers specific solute-solvent hydrogen-bond interactions play a minor role with respect to conformational and electrostatic effects.

Whereas a broad range of literature exists on the spectroscopy of water in disparate conditions, infrared (IR) and Raman spectra of water subjected to electric fields have never extensively been investigated so far. Based on ab initio molecular dynamics simulations, here we present IR and Raman spectra of bulk liquid water under the effect of static electric fields. A contraction of the entire frequency range is recorded upon increasing the field intensity both in the IR and in the Raman spectra. Whilst the OH stretching band is progressively shifted toward lower frequencies - indicating a field-induced strengthening of the H-bond network - all the other bands are up-shifted by the field. Furthermore, an evident modification of the librational mode band appears in all the spectra. Finally, the order-maker action of the field emerges also from the increase of the water orientational tetrahedral order. Upon field exposure, the water structure becomes more "ice like".

Activated reduced graphene oxide (a-rGO) is a material with a rigid 3D porous structure and high specific surface area (SSA). Using variation of activation parameters and post-synthesis mechanical treatment we prepared two sets of materials with a broad range of BET (N2) SSA ∼1000-3000 m2 g-1, and significant differences in pore size distribution and oxygen content. The performance of activated graphene as an electrode in a supercapacitor with KOH electrolyte was correlated with the structural parameters of the materials and water sorption properties. a-rGO is a hydrophobic material as evidenced by the negligibly small BET (H2O) SSA determined using analysis of water vapor sorption isotherms. However, the total pore volume determined using water vapor sorption and sorption of liquid water is almost the same as the one found by analysis of nitrogen sorption isotherms. Ball milling is found to provide an improved bulk density of activated graphene and collapse of all pores except the smallest ones (<2 nm). A decrease in the activation temperature from 850 °C to 550 °C is found to…

The interaction between phosphates and soil mineral surfaces, such as Fe- and Al-(oxyhydr)oxides, plays a crucial role in the immobilization of P and thus its availability for plants. The reactions of phosphates with Fe-hydroxides and especially goethite have been studied extensively. But a molecular-level picture of the phosphate binding mechanisms at the goethite-water interface is still lacking. Therefore, in the current contribution we have explored the molecular binding mechanisms for the adsorbed phosphate at the goethite-water interface by performing sorption kinetics experiments for orthophosphate and characterizing the adsorbed species by FT-IR spectroscopy. In parallel, periodic DFT calculations have been performed to explore the interaction mechanisms and to assign the IR spectra for monodentate (M) and bidentate (B) orthophosphate complexes at two different goethite surface planes (010 and 100) in the presence of water. In general, our interaction energy results give evidence that the mono-protonated B phosphate complex is favored to be formed at the goethite-water…

To understand the effect of magnesium atom doping on boron clusters, here we report the lowest-lying energy structures and electronic properties of neutral and monoanionic magnesium-boron clusters, in which boron atoms range in size from 10 to 20, in the framework of a CALYPSO structural search and DFT calculations. One of the most stable combinations is MgB18, which adopts an unexpected tubular drum-shaped geometry that is found for the first time in boron clusters doped with alkaline-earth metal atoms. The stability of the MgB18 cluster mainly stems from the intense electrostatic interaction between the B18 skeleton and the Mg atom.

Revised thermodynamic and dynamical properties of the hard sphere (HS) system are obtained from extensive molecular dynamics calculations carried out with large system sizes (number of particles, N) and long times. Accurate formulas for the compressibility factor of the HS solid and fluid branches are proposed, which represent the metastable region and take into account its divergence at close packing. Some basic second-order thermodynamic properties are obtained and a maximum in some of their derivatives in the metastable fluid region is found. The thermodynamic parameters associated with the melting-freezing transition have been determined to four digit accuracy, which generates accurate new values for the coexistence properties of the HS system. For the self-diffusion coefficient, D, it is shown that relatively large systems (N > 104) are required to achieve an accurate linear extrapolation of D to the infinite size limit with a D vs. N-1/3 plot. Moreover, it is found that there is a density dependence of the value of the slope in the linear regime. The density dependent…

Local energy decomposition (LED) analysis decomposes the interaction energy between two fragments calculated at the domain-based local pair natural orbital CCSD(T) (DLPNO-CCSD(T)) level of theory into a number of chemically meaningful contributions. Herein, this scheme is applied to the interaction between the transition metal (TM) and the alkane in σ-complexes. It is demonstrated that the often-neglected London dispersion (LD) energy is a fundamental component of the TM-alkane interaction for a wide range of experimentally characterized σ-complexes. LD effects determine the structure and the thermodynamic stability of σ-complexes and influence the selectivity of CH activation reactions. The magnitude of the LD energy can be modulated by increasing the size of the alkane and of the ancillary ligands on the TM. These results provide further evidence on the fundamental role that London dispersion plays in organometallic chemistry.

Herein, we present defect-induced photoluminescence behavior of Ga-doped ZnO (GZO) thin films with varying doping (Ga) concentrations and energetic ion irradiation. The Ga-doped ZnO thin films were prepared by a sol-gel spin-coating method. Micro-photoluminescence (μ-PL) was carried out to investigate the defect-related emission with the variation of doping concentration and ion irradiation. The PL spectra revealed that all films showed near-band-edge (NBE) emission along with a broad visible emission band, consisting of violet, blue, green, and yellow emission bands. The intensity of these emission bands was found to be strongly dependent on the Ga doping concentration and ion irradiation. Interestingly, a pronounced violet emission band around 2.99 eV (415 nm) was observed for the Ga-doped ZnO thin films with high Ga doping concentration, whereas an irradiated film with high ion fluence exhibited a strong green emission around 2.39 eV (519 nm); however, we concluded that the violet emission might have originated from zinc interstitial defects (Zni), and the concentration of Zni…

Several significant improvements are proposed to the computational molecular spectroscopy protocol MARVEL (Measured Active Rotational-Vibrational Energy Levels) facilitating the inversion of a large set of measured rovibrational transitions to energy levels. The most important algorithmic changes include the use of groups of transitions, blocked by their estimated experimental (source segment) uncertainties, an inversion and weighted least-squares refinement procedure based on sequential addition of blocks of decreasing accuracy, the introduction of spectroscopic cycles into the refinement process, automated recalibration, synchronization of the combination difference relations to reduce residual uncertainties in the resulting dataset of empirical (MARVEL) energy levels, and improved classification of the lines and energy levels based on their accuracy and dependability. The resulting protocol, through handling a large number of measurements of similar accuracy, retains, or even improves upon, the best reported uncertainties of the spectroscopic transitions employed. To show its…

Water dissociation on oxides is of great interest because its fundamental aspects are still not well understood and it has implications in many processes, from ferroelectric polarization screening phenomena to surface catalysis and surface chemistry on oxides. In situ water dissociation and redox processes on metal oxide perovskites which easily expose TiO2-terminated surfaces, such as SrTiO3, BaTiO3 or Pb(Zr,Ti)O3, are studied by ambient pressure XPS, as a function of water vapour pressure. From the analysis of the O1s spectrum, we determine the presence of different types of oxygen based species, from hydroxyl groups, either bound to Ti4+ and metal sites or lattice oxygen, to different peroxide compounds, and propose a model for the adsorbate layer composition, valid for environmental conditions. From the XPS analysis, we describe the existing surface redox reactions for metal oxide perovskites, occurring at different water vapour pressures. Among them, peroxide species resulting from surface oxidative reactions are correlated with the presence of Ti4+ ions, which are observed to…

Hybrid polymer-ceramic electrolytes with high ceramic loading are currently investigated as a promising solution to achieve high safety and optimal mechanical properties in all-solid-state rechargeable batteries. In this study composite poly(ethylene oxide)/Li1.3Al0.3Ti1.7(PO4)3 (PEO/LATP) electrolytes, with and without lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) as the Li+ salt, were investigated through a combination of physicochemical and electrochemical techniques, including X-ray diffraction, scanning electron microscopy, thermal analysis, solid-state MAS-NMR and impedance spectroscopy. We were able to shed light on the interactions between the ceramic and the polymer phases, and on the mechanisms for Li+ transport. Membranes containing 70 wt% of LATP and 30 wt% of P(EO)15LiTFSI exhibit conductivity values of 4 × 10-5 Ω-1 cm-1 at 25 °C and in excess of 10-4 Ω-1 cm-1 at 45 °C. These promising results, obtained on a quasi-ceramic electrolyte through room temperature processing, suggest that further improvements in the transport properties of "polymer-in-ceramic" systems…

The solvation of lidocaine in three newly designed deep eutectic solvents is studied using combined experimental and theoretical methods that include density functional theory and molecular dynamics methods. The intermolecular forces between lidocaine and the hydrogen bond acceptors and hydrogen bond donors of the deep eutectic solvents were analysed regarding the type and the strength of inter- and intra-molecular bonding. The structure, composition and properties of the lidocaine solvation shells are analysed together with the possible lidocaine-clustering around the studied deep eutectic solvents and their constituent molecules. Furthermore, the changes in the solvent structures upon lidocaine solubilization are also studied. Natural product-based eutectic solvents showed considerably high solvation of lidocaine in all three deep eutectics based on the strong solute-solvent intermolecular interactions accompanied by a slight volume expansion and minor solvent structural changes. These non-toxic and almost null-volatile therapeutic deep eutectic solvents can be considered as…

A new optical chemosensor N1 was designed and synthesized by condensing 4-chloro-7-nitrobenzofurazan with 2-aminophenylbenzimidazole. In CH3OH : H2O (1 : 1, v/v) medium, sensor N1 exhibited high selectivity and sensitivity towards Cu2+ and Hg2+ ions by showing a distinct colour change from pale yellow to pink due to the internal charge transfer occurring between the sensor N1 and the Cu2+/Hg2+ ions upon complexation in 1 : 1 stoichiometry. Also, the binding of Cu2+ and Hg2+ ions with N1 resulted in new absorption bands at 540 nm and 375 nm with the concurrent disappearance of the sensor absorption bands at 485 nm and 321 nm. Using the spectral changes of N1, the concentrations of Cu2+ and Hg2+ ions can be detected down to 1.23 × 10-7 M and 4.70 × 10-7 M, respectively. Further, the colour change of N1 in the presence of Cu2+/Hg2+ ions was integrated with a smartphone colour-scanning app to measure the red-green-blue (RGB) colour intensity, and a cost-effective method was developed for the on-site detection of Cu2+/Hg2+ ions. Finally, the practicability of sensor N1 to quantify Cu2+…

reduces both the friction and the viscosity of octane, and the enhancement of octane flow is mainly caused by the reduction of viscosity. Our results highlight the importance of multicomponent interactions in nanoscale fluid transport. The results presented here also have a direct implication in enhanced oil recovery in unconventional reservoirs.

Two-dimensional (2D) metal-semiconductor junctions have shown significant potential for nanoelectronic and optoelectronic applications. Herein, the structural and electronic properties of a germanium monosulfide/graphene (GeS/G) van der Waals (vdW) heterostructure were explored using first-principles calculations. It was discovered that the structural rigidity and mechanical anisotropy of GeS could be significantly improved by loading graphene. In addition, the intrinsic characteristics of the atomic layer GeS and graphene were well preserved, and the formation of a p-type Schottky contact in the equilibrium state was demonstrated; moreover, the Schottky barrier height of the interface was sensitive to the external condition and could be reduced to zero via applying normal strain or a perpendicular electric field. These insightful results pave the way for experimental research and the design of other 2D nanomaterial-based electronic and optoelectronic devices.

The ethylene-forming enzyme (EFE) is a unique member of the Fe(ii)- and 2-oxoglutarate-dependent (Fe/2OG) oxygenases. It converts 2OG into ethylene plus three CO2 molecules (ethylene-forming reaction) and also catalyzes the C5 hydroxylation of l-arginine coupled to the oxidative decarboxylation of 2OG (l-Arg hydroxylation reaction). To uncover the mechanisms of the dual transformations by EFE, quantum mechanical/molecular mechanical (QM/MM) calculations were carried out. Based on the results, a branched mechanism was proposed. An FeII-peroxysuccinate complex with a dissociated CO2 generated through the nucleophilic attack of the superoxo moiety of the Fe-O2 species on the keto carbon of 2OG is the key common intermediate in both reactions. A competition between the subsequent CO2 insertion (a key step in the ethylene-forming pathway) and the O-O bond cleavage (leading to the formation of succinate) governs the product selectivity. The calculated reaction barriers suggested that the CO2 insertion is favored over the O-O bond cleavage. This is consistent with the product preference…

Solid-state lithium batteries cannot achieve reasonable power densities because of dendrites, whose formation mechanisms remain uncertain. This paper applies principles of chemomechanics to investigate the critical current above which dendrites form in lithium-conductive ceramics. Applied voltage induces stress in solid electrolytes; dendrites appear to nucleate in the exemplary garnet-oxide material Li7La3Zr2O12 (LLZO) when the interfacial pressure exceeds a particular value. The critical pressure of polycrystalline LLZO correlates well with the surface-energy changes incurred by lithium plating in its grain boundaries. A derived formula, validated by experiments, predicts quantitatively how critical current varies with properties including interfacial impedance, bulk permittivity, and grain size. As well as suggesting novel strategies to create more resilient ion-conductive ceramics, the proposed mechanism rationalizes experimental observations of bulk lithium plating and explains how LLZO exhibits an electrically activated transition from stable low-current cyclability to…

Electrochemical nitrogen (N2) fixation as an effective method has realized the sustainable production of ammonia where efficient electrocatalysts for converting N2 into NH3 at room temperature have become a key scientific issue. Herein, we proposed that the catalytic activity of a single Mo atom supported on graphene (Mo/G) for the nitrogen reduction reaction (NRR) can be tuned by non-metal heteroatom (B, N, P, S, Se etc.) doping. Our density functional theory (DFT) calculations revealed that the Se atom is the best doping element to tune the optimal electronic structure of the Mo atom for catalyzing the NRR among these heteroatoms, leading to the lowest potential of 0.41 V vs. RHE for Mo/SeG, which is much better than the current metal-based catalysts. Our work provided a new strategy to design electrocatalysts for the NRR.