The 100 most-cited articles in Physical Chemistry Chemical Physics, 2018

CO2 reduction conducted in electrochemical cells with planar electrodes immersed in an aqueous electrolyte is severely limited by mass transport across the hydrodynamic boundary layer. This limitation can be minimized by use of vapor-fed, gas-diffusion electrodes (GDEs), enabling current densities that are almost two orders of magnitude greater at the same applied cathode overpotential than what is achievable with planar electrodes in an aqueous electrolyte. The addition of porous cathode layers, however, introduces a number of parameters that need to be tuned in order to optimize the performance of the GDE cell. In this work, we develop a multiphysics model for gas diffusion electrodes for CO2 reduction and used it to investigate the interplay between species transport and electrochemical reaction kinetics. The model demonstrates how the local environment near the catalyst layer, which is a function of the operating conditions, affects cell performance. We also examine the effects of catalyst layer hydrophobicity, loading, porosity, and electrolyte flowrate to help guide…

Previous investigations [H. L. Zhuang and R. G. Hennig, J. Phys. Chem. C, 2013, 117, 20440-20445; J. Kang, S. Tongay, J. Zhou, J. Li and J. Wu, Appl. Phys. Lett., 2013, 102, 012111] demonstrated that molybdenum disulfide (MoS2) is a potential photocatalyst for water splitting. However, the photogenerated electron-hole pairs in MoS2 remain in the same spatial regions, resulting in a high rate of recombination. Using first-principles calculations, we designed a MoS2-based heterostructure by stacking MoS2 on two-dimensional zinc oxide (ZnO) and investigated its structural, electronic, and optical properties. The interaction at the MoS2/ZnO interface was found to be dominated by van der Waals (vdW) forces. The energy levels of both water oxidation and reduction lie within the bandgap of the MoS2/ZnO vdW heterostructure, which guarantee their occurrence for water splitting. Moreover, a type-II band alignment and a large built-in electric field are formed at the MoS2/ZnO interface, which ensure the enhanced separation of the photogenerated electron-hole pairs. In addition, strong optical…

Entropy effects play an important role in drug-target interactions, but the entropic contribution to ligand-binding affinity is often neglected by end-point binding free energy calculation methods, such as MM/GBSA and MM/PBSA, due to the expensive computational cost of normal mode analysis (NMA). Here, we systematically investigated entropy effects on the prediction power of MM/GBSA and MM/PBSA using >1500 protein-ligand systems and six representative AMBER force fields. Two computationally efficient methods, including NMA based on truncated structures and the interaction entropy approach, were used to estimate the entropic contributions to ligand-target binding free energies. In terms of the overall accuracy, we found that, for the minimized structures, in most cases the inclusion of the conformational entropies predicted by truncated NMA (enthalpynmode_min_9Å) compromises the overall accuracy of MM/GBSA and MM/PBSA compared with the enthalpies calculated based on the minimized structures (enthalpymin). However, for the MD trajectories, the binding free energies can be improved by…

Research on ionic liquids has achieved rapid progress in the last several decades. Stability is a prerequisite for the application of ionic liquids. Ionic liquids may be used at elevated temperature, as electrolytes, or under irradiation. Therefore, the thermal, electrochemical, and radiolytic stabilities of ionic liquids are important and need to be known before their usage. Many research papers and some reviews on the stabilities of ionic liquids have been published. However, new results are continuously being published and a comprehensive review and perspective on this topic are still urgently needed. In this perspective, we intend to provide a comprehensive review including characterization methods, the effects of chemical composition of the ionic liquids on the thermal, electrochemical, and radiolytic stabilities of ionic liquids, respectively. Moreover, the thermal stability of some special types of ionic liquids such as poly(ionic liquids) and mixed ionic liquids, and the thermal and electrochemical stabilities of protic ionic liquids are discussed too. For thermal stability,…

Chemical exfoliation of MAX phases into two-dimensional (2D) MXenes can be considered as a major breakthrough in the synthesis of novel 2D systems. To gain insight into the exfoliation possibility of MAX phases and to identify which MAX phases are promising candidates for successful exfoliation into 2D MXenes, we perform extensive electronic structure and phonon calculations, and determine the force constants, bond strengths, and static exfoliation energies of MAX phases to MXenes for 82 different experimentally synthesized crystalline MAX phases. Our results show a clear correlation between the force constants and the bond strengths. As the total force constant of an "A" atom contributed from the neighboring atoms is smaller, the exfoliation energy becomes smaller, thus making exfoliation easier. We propose 37 MAX phases for successful exfoliation into 2D Ti2C, Ti3C2, Ti4C3, Ti5C4, Ti2N, Zr2C, Hf2C, V2C, V3C2, V4C3, Nb2C, Nb5C4, Ta2C, Ta5C4, Cr2C, Cr2N, and Mo2C MXenes. In addition, we explore the effect of charge injection on MAX phases. We find that the injected charges, both…

In contrast to ordinary polymers, the vast majority of biological macromolecules adopt highly ordered three-dimensional structures that define their functions. The key to folding of a biopolymer into a unique 3D structure or to an assembly of several biopolymers into a functional unit is a delicate balance between the attractive and repulsive forces that also makes such self-assembly reversible under physiological conditions. The all-atom molecular dynamics (MD) method has emerged as a powerful tool for studies of individual biomolecules and their functional assemblies, encompassing systems of ever increasing complexity. However, advances in parallel computing technology have outpaced the development of the underlying theoretical models-the molecular force fields, pushing the MD method into an untested territory. Recent tests of the MD method have found the most commonly used molecular force fields to be out of balance, overestimating attractive interactions between charged and hydrophobic groups, which can promote artificial aggregation in MD simulations of multi-component protein,…

Based on first-principles calculations, the intrinsic defects in FAPbI 3 are investigated systematically. It is found that antisites FA I and I FA create deep levels in the band gap which can act as recombination centers.

Co-catalyst loading provides an effective way to enhance the efficiency of photocatalysts for solar hydrogen production. From a sustainability point of view, it has immense scientific and technological values to explore more efficient co-catalytic systems by using multi-cocatalysts, because of potential synergetic effects between different components. Herein, the feasibility of using Ti3C2 MXene nanoparticles and Pt nanoclusters as dual co-catalysts to enhance the photoactivity of g-C3N4 for H2 production was investigated. Due to the improved electrical conductivity and increased reactive sites for photoreduction reactions, Ti3C2 and Pt co-modified photocatalysts exhibited a high photocatalytic hydrogen production activity of 5.1 mmol h-1 g-1. Compared to g-C3N4/Ti3C2 and g-C3N4/Pt, the 3- and 5-fold increased photoactivity demonstrated great potential of Ti3C2 MXene nanoparticles to construct high-performance photocatalysts. The synergetic effects between Ti3C2 and Pt were fundamentally investigated, indicating that the specific transfer of electrons not only contributed to the…

reduces to half. These results may offer perspectives on thermal management of MoSSe monolayers, for applications in thermoelectrics, thermal circuits and nanoelectronics, and may motivate further theoretical or experimental efforts to investigate thermal transport in Janus TMD monolayers.

Three new organic compounds primarily based on 8-hydroxyquinoline have been successfully synthesized and characterized via different spectroscopic methods (FTIR, 1H, and 13C NMR). The synthesized compounds, namely 5-propoxymethyl-8-hydroxyquinoline (PMHQ), 5-methoxymethyl-8-hydroxyquinoline (MMHQ) and 5-hydroxymethyl-8-hydroxyquinoline (HMHQ), were evaluated as corrosion inhibitors for carbon steel in 1 M HCl solution using electrochemical impedance spectroscopy, potentiodynamic polarization and weight loss measurements at 298 K. Electrochemical measurements confirmed that the newly synthesized 5-alkoxymethyl-8-hydroxyquinoline derivatives are mixed type corrosion inhibitors and confirmed maximum protection efficiencies of 94, 89 and 81% for PMHQ, MMHQ, and HMHQ, respectively, at the optimum concentration of 10-3 M. The EIS spectra confirmed a slightly depressed semi-circle profile with a single time constant in Bode diagrams for the three organic compounds over the whole concentration and temperature ranges studied. The adsorption of PMHQ, MMHQ, and HMHQ on the carbon steel surface…

Atomically thin Janus transition metal dichalcogenides (JTMDs) with an asymmetric structure have emerged as a new class of intriguing two-dimensional (2D) semiconductor materials. Using state-of-the-art density functional theory (DFT) calculations, we systematically investigate the structural, electronic, and optical properties of JTMD monolayers and heterostructures. Our calculated results indicate that the JTMD monolayers suffer from a bending strain but present high thermodynamic stability. All of them are semiconductors with a band-gap range from 1.37 to 1.96 eV. They possess pronounced optical absorption in the visible-light region and cover a large range of carrier mobilities from 28 to 606 cm2 V-1 s-1, indicating strong anisotropic characteristics. Significantly, some monolayer JTMDs (e.g., WSSe and WSeTe) exhibit superior mobilities than conventional TMD monolayers, such as MoS2. Moreover, the absolute band-edge positions of the JTMD monolayers are higher than the water redox potential, and most JTMD heterostructures have a type-II band alignment that contributes to the…

Since quantum mechanical calculations do not typically lend themselves to chemical interpretation, analyses of bonding interactions depend largely upon models (the octet rule, resonance theory, charge transfer, etc.). This sometimes leads to a blurring of the distinction between mathematical modelling and physical reality. The issue of polarization vs. charge transfer is an example; energy decomposition analysis is another. The Hellmann-Feynman theorem at least partially bridges the gap between quantum mechanics and conceptual chemistry. It proceeds rigorously from the Schrödinger equation to demonstrating that the forces exerted upon the nuclei in molecules, complexes, etc., are entirely classically coulombic attractions with the electrons and repulsions with the other nuclei. In this paper, we discuss these issues in the context of noncovalent interactions. These can be fully explained in coulombic terms, electrostatics and polarization (which include electronic correlation and dispersion).

It is difficult to calculate the Judd-Ofelt (J-O) parameters for trivalent rare earth (RE)-doped powders due to the unavailable absorption spectrum that is necessarily used in the conventional J-O calculation procedure. In this study, a universal method starting from the diffuse-reflection spectrum for calculating the J-O parameters of RE3+-doped powdered samples was proposed. In this proposed method, by taking the Kubelka-Munk function into account, the absorption cross-section spectrum was derived from the diffuse-reflection spectrum in the RE3+-doped powdered sample using the connection between the absorption cross section and the radiative transition rate of RE3+. Then, the J-O parameters might be calculated from the absorption cross-section spectrum via the traditional J-O calculation technique. The NaYF4:Er3+/Yb3+ and NaYF4:Er3+ phosphors were prepared via an auto-combustion-assisted fluoridation technique, and the J-O calculation was carried out for the obtained samples. The obtained J-O parameters were compared with those reported in the literature and also verified by…

Two processes for crosslinking polyvinyl alcohol (PVA) with sulfosuccinic acid (SSA) and thermal crosslinking were used to fabricate a proton exchange membrane (PEM). Such PEMs are used in different fields involving fuel cell applications. The crosslinking reaction between PVA and SSA was confirmed using Fourier-transform infrared (FTIR) spectroscopy. The characterization of the prepared membranes, namely, ion exchange capacity (IEC), thermal analyses, water uptake, and ionic conductivity, was carried out. The IEC of the prepared membranes was found to be between 0.084 and 2.086 mmol g-1, resulting in an essential increase in the ionic conductivity. It was observed that the ionic conductivity was in the range of 0.003-0.023 S cm-1, depending on both temperature and SSA content. From the thermogravimetric analysis (TGA) results, it was revealed that the thermal stability of the crosslinked membranes improved. Moreover, water uptake decreased with increasing SSA content. Positron annihilation lifetime spectroscopy (PALS) was used to study the microstructure of the PVA/SSA membranes…

Structural symmetry-breaking can lead to novel electronic and piezoelectric properties in two-dimensional (2D) materials. In this paper, we propose a 2D Janus tellurene (Te2Se) monolayer with asymmetric Se/Te surfaces and its derived multilayer structures. The band structure calculations show that the 2D Janus Te2Se monolayer is an indirect gap semiconductor, and the intrinsic mirror asymmetry combined with the spin-orbit coupling induces the Rashba spin splitting and the out-of-plane spin polarization. Moreover, the absence of both the inversion symmetry and out-of-plane mirror symmetry, together with flexible mechanical properties, results in large in-plane and out-of-plane piezoelectric coefficients that are valuable in 2D piezoelectric materials. Furthermore, the out-of-plane piezoelectric effects can exist in multilayer structures under different stacking sequences while the in-plane piezoelectric effect can only exist in some specific stacking patterns. The piezoelectric coefficients of the Janus Te2Se monolayer and multilayers exceed those of many Janus transition metal…

The electrochemical reduction of N2 to NH3 (NRR) under ambient conditions is significant for sustainable agriculture. Here, by means of density functional theory (DFT) computations, the potential of a series of single transition metal (TM) atoms embedded into a MoS2 monolayer with an S-vacancy (TM/MoS2) as electrocatalysts for NRR was systematically investigated. Our DFT results revealed that among all these considered candidate catalysts, the single Mo atom embedded into the MoS2 nanosheet was found to be the most active catalyst for NRR with an onset potential of -0.53 V, in which the hydrogenation of the adsorbed N2* to N2H* is the potential-determining step. The high stabilization of the N2H* species is responsible for the superior performance of the embedded Mo atom for the NRR, which is well consistent with its d-band center. Our findings may facilitate the further design of single-atom electrocatalysts with high efficiency for NH3 synthesis at room temperature.

Materials with high oxygen ion conductivity and low electronic conductivity are required for electrolytes in solid oxide fuel cells (SOFC) and high-temperature electrolysis (SOEC). A potential candidate for the electrolytes, which separate oxidation and reduction processes, is rare-earth doped ceria. The prediction of the ionic conductivity of the electrolytes and a better understanding of the underlying atomistic mechanisms provide an important contribution to the future of sustainable and efficient energy conversion and storage. The central aim of this paper is the detailed investigation of the relationship between defect interactions at the microscopic level and the macroscopic oxygen ion conductivity in the bulk of doped ceria. By combining ab initio density functional theory (DFT) with Kinetic Monte Carlo (KMC) simulations, the oxygen ion conductivity is predicted as a function of the doping concentration. Migration barriers are analyzed for energy contributions, which are caused by the interactions of dopants and vacancies with the migrating oxygen vacancy. We clearly…

. This behavior is described by a negative effective transference number of Li, resulting in a negative contribution of Li ions to the overall conductivity. Li effective transference numbers are in the range of -0.04 to -0.02, depending on Li salt concentration and anion type. Transference numbers thus clearly deviate from apparent transference numbers estimated from diffusion coefficients, as an effect of a vehicular transport mechanism. This has important implications for the mechanism of Li mass transport in Li ion batteries as the drift of charged clusters has to be overcompensated by diffusive mass transport of neutral, Li-containing aggregates.

An accurate experimental determination of electronic structures in semi-conductor nanopowders is a challenging task. We propose here to combine UPS and UV-Vis spectroscopies in order to get the full description of the electronic band alignment of powder samples, TiO2 rutile and anatase. For UPS measurements, two preparation methods, namely the dropping method and electrophoretic deposition, were used to prepare layers of titania powders on a conducting substrate, ITO or Ag. Both methods lead to comparable results, with a quantitative description of the energy levels from the valence band. Combining these results with the UV-Vis spectra of the same powders enables the determination of the absolute position of the valence band maximum and the conduction band minimum. Combined UPS-UV-Vis spectroscopy provides a better insight into the properties of a powdered material which can differ from single crystal model systems. It can also be used to predict the electronic transfer in mixed phase systems during photocatalytic processes.

Combining the first-principles density functional method and crystal structure prediction techniques, we report a series of hexagonal two-dimensional transition metal borides including Sc2B2, Ti2B2, V2B2, Cr2B2, Y2B2, Zr2B2, and Mo2B2. Their dynamic and thermal stabilities are testified by phonon and molecular dynamics simulations. We investigate the potential of the two-dimensional Ti2B2 monolayer as an anode material for Li-ion and Na-ion batteries. The Ti2B2 monolayer possesses high theoretical specific capacities of 456 and 342 mA h g-1 for Li and Na, respectively. The very high Li/Na diffusivity with an ultralow energy barrier of 0.017/0.008 eV indicates an excellent charge-discharge capability. In addition, good electronic conductivity during the whole lithiation process is found by electronic structure calculations. The very small change in volume after the adsorption of one, two, and three layers of Li and Na ions indicates that the Ti2B2 monolayer is robust. These results highlight the suitability of Ti2B2 monolayer as well as the other two-dimensional transition metal…

are found to quickly reach a maximum due to chemical reactions in solution. The trends observed in our model correlate well with experimental observations from the literature.

-tolerant nature are attractive properties for using them in a wide range of applications. Our finding provides good information to narrow down the choices of materials to be tested in future experimental work.

A promising highly efficient and inexpensive W@N-doped graphyne electrocatalyst for N 2 fixation has been predicted by first-principle calculation.

The nitrogen reduction reaction (NRR) under ambient conditions using renewable energy is a green and sustainable strategy for the synthesis of NH3, which is one of the most important chemicals and carbon-free carriers. Thus, the search for low-cost, highly efficient, and stable NRR electrocatalysts is critical to achieve this goal. Herein, using comprehensive density functional theory (DFT) computations, we design a new class of NRR electrocatalysts based on a single transition metal (TM) atom supported on the experimentally feasible two-dimensional C2N monolayer (TM@C2N). Based on the computed free energies of each elementary pathway, Mo@C2N is predicted to exhibit the best catalytic activity among the TM@C2N, in which the proton-coupled electron transfer of the NH2* species to NH3(g) is the potential-determining step. Especially, the computed onset potential of the NRR on Mo@C2N is -0.17 V, which is even lower than that for the well-established stepped Ru(0001) surface (-0.43 V). Furthermore, the NRR catalytic performance of these TM@C2N can be well explained by their adsorption…

The development of non-empirical double-hybrid density functionals (DHDFs) is a very active research area with the number of approaches in this field having increased rapidly. At the same time, there is a lack of published work that provides a fair assessment and comparison between non-empirical and semi-empirical DHDFs on an equal footing. Herein, we close this gap and present a thorough analysis of both classes of DHDFs on the large GMTKN55 benchmark database for general main-group thermochemistry, kinetics, and noncovalent interactions [Goerigk et al., Phys. Chem. Chem. Phys., 2017, 19, 32184-32215]. In total, 115 variations of dispersion-corrected and -uncorrected DHDFs are tested, which will be condensed to an in-depth assessment of 31 methods: 19 non-empirical and 12 semi-empirical DHDFs. As such, our study represents the largest DHDF study ever conducted and can serve as an important benchmark informing method developers and users alike. Our results show that semi-empirical DHDFs are the most robust density functional approximations and more reliable and accurate than…

Amitifadine, the only drug ever clinically tested in Phase 3 for treating depression, is a triple reuptake inhibitor (TRI) that simultaneously interacts with human monoamine transporters (MATs) including hSERT, hNET and hDAT. This novel multi-target strategy improves drug efficacy and reduces the toxic side effects of drugs. However, the binding modes accounting for amitifadine's polypharmacological mode of action are still elusive, and extensive exploration of the amitifadine-target interactions between amitifadine and MATs is urgently needed. In this study, a total of 0.63 μs molecular dynamics (MD) simulations with an explicit solvent as well as endpoint binding free energy (BFE) calculation were carried out. MD simulation results identified a shared binding mode involving eleven key residues at the S1 site of MATs for the binding of amitifadine, and the results of the BFE calculations were in good agreement with experimental reports. Moreover, by analyzing the per-residue energy contribution variation at the S1 site of three MATs and additional cross-mutagenesis simulations, the…

Electrolytic gas evolution is a fundamental phenomenon occurring in a large number of industrial applications. In these processes gas bubbles are formed at the electrode from a supersaturated solution. Since dissolved gases can change the surface tension, a gas concentration gradient may cause the surface tension to vary locally at the interface of the gas bubble. Surface tension gradients may also form due to temperature gradients generated by ohmic heating of the electrolyte. In both cases, the resulting shear stress imposes a convection in the electrolyte and the gas bubble (Marangoni effect). This phenomenon may influence the entire electrolytic gas evolution process, e.g., by an enhanced mass transfer. In this study, the first evidence of the Marangoni convection near growing hydrogen bubbles, generated by water electrolysis, is provided. Microscopic high speed imaging was applied to study the evolution of single hydrogen bubbles at a microelectrode. The convection near the interface of the growing bubble was measured by using a time-resolved Particle Tracking Velocimetry (PTV)…

Static polarizabilities are the first response of the electron density to electric fields, and are therefore important for predicting intermolecular and molecule-field interactions. They also offer a global measure of the accuracy of the treatment of excited states by density functionals in a formally exact manner. We have developed a database of benchmark static polarizabilities for 132 small species at equilibrium geometry, using coupled cluster theory through triple excitations (extrapolated to the complete basis set limit), for the purpose of developing and assessing density functionals. The performance of 60 popular and recent functionals are also assessed, which indicates that double hybrid functionals perform the best, having RMS relative errors in the range of 2.5-3.8%. Many hybrid functionals also give quite reasonable estimates with 4-5% RMS relative error. A few meta-GGAs like mBEEF and MVS yield performance comparable to hybrids, indicating potential for improved excited state predictions relative to typical local functionals. Some recent functionals however are found to…

The frequency of oil spills and the increasing amount of oily sewage not only cause serious water pollution as well as a lot of ecological problems but also result in huge economic losses. To address such problems, developing advanced technologies and materials for achieving efficient oil/water separation is a critical way and emerging as a hot research topic nowadays. Herein, we have reviewed the recent developments in oil/water separation by using superwetting porous materials, mainly focusing on natural materials. By using natural materials as examples, we show how to use superwetting porous materials to separate different mixtures of water and oil, including the inherent superwettability of the natural materials, separating method/process, and separation mechanism. Natural superwetting materials are usually low-cost and eco-friendly, and can be easily obtained, so oil/water separation based on natural materials has great promise to address the above-mentioned globally recognized oil contamination challenge. In addition, these natural examples seem more attractive to the general…

Spinel ferrites (T[M1-xFex]O[MxFe2-x]O4 with 0 ≤ x ≤ 1, where M is a bivalent metal ion and the superscripts denote tetrahedral and octahedral sites) are materials commonly used in electronics due to their outstanding magnetic properties. Thus, the effect of the degree of inversion, x, on these properties is well known. However, its effect on other properties of these materials has rarely been investigated in detail. Since ferrites gained much attention during the last decade as visible light active photocatalysts and photoelectrocatalysts, understanding the effect of the degree of inversion on the optical properties became necessary. Among photocatalytically and photoelectrocatalytically active spinel ferrites, zinc ferrite (ZnFe2O4, ZFO) is one of the most widely studied materials. In this work, five ZFO samples with degrees of inversion varying from 0.07 to 0.20 were prepared by a solid-state reaction employing different annealing temperatures and subsequent quenching. Raman and UV-Vis-NIR spectra were measured and analyzed together with theoretical results obtained from ab…

Hydrogen fuel is among the cleanest renewable resources and is the best alternative to fossil fuels for the future. Hydrogen can be best produced by means of electrolysis or photoelectrolysis of water among the various routes available for hydrogen production. So far, Pt has been recognized as the best electrode material for electrochemical hydrogen production. However, the cost of the catalyst, activity, and durability make Pt-catalyzed hydrogen production unsuitable on a commercial scale. It has hence become imperative to explore low-cost, highly active and durable HER catalysts to replace platinum as a catalyst. This perspective provides key concepts and the current status of the research on the properties of nanocatalysts that influence the hydrogen evolution reaction. Important structural features controlling the surface chemistry (i.e. facets, defects, dopants), nature of supports (graphene, CNTs, black phosphorus), role of heteroatoms, media and morphology are the key points of discussion in this perspective.

We employ Bayesian statistics using the nested-sampling algorithm to compare and rank multiple models of ergodic diffusion (including anomalous diffusion) as well as to assess their optimal parameters for in silico-generated and real time-series. We focus on the recently-introduced model of Brownian motion with "diffusing diffusivity"-giving rise to widely-observed non-Gaussian displacement statistics-and its comparison to Brownian and fractional Brownian motion, also for the time-series with some measurement noise. We conduct this model-assessment analysis using Bayesian statistics and the nested-sampling algorithm on the level of individual particle trajectories. We evaluate relative model probabilities and compute best-parameter sets for each diffusion model, comparing the estimated parameters to the true ones. We test the performance of the nested-sampling algorithm and its predictive power both for computer-generated (idealised) trajectories as well as for real single-particle-tracking trajectories. Our approach delivers new important insight into the objective selection of the…

Machine-learning of atomic-scale properties amounts to extracting correlations between structure, composition and the quantity that one wants to predict. Representing the input structure in a way that best reflects such correlations makes it possible to improve the accuracy of the model for a given amount of reference data. When using a description of the structures that is transparent and well-principled, optimizing the representation might reveal insights into the chemistry of the data set. Here we show how one can generalize the SOAP kernel to introduce a distance-dependent weight that accounts for the multi-scale nature of the interactions, and a description of correlations between chemical species. We show that this improves substantially the performance of ML models of molecular and materials stability, while making it easier to work with complex, multi-component systems and to extend SOAP to coarse-grained intermolecular potentials. The element correlations that give the best performing model show striking similarities with the conventional periodic table of the elements,…

A family of heavy atom-free BODIPY-anthracene dyads (BADs) exhibiting triplet excited state formation from charge-transfer states is reported. Four types of BODIPY scaffolds, different in the alkyl substitution pattern, and four anthracene derivatives have been used to access BADs. Fluorescence and intersystem crossing (ISC) in these dyads depend on donor-acceptor couplings and can be accurately controlled by substitution or media polarity. Under conditions that do not allow charge transfer (CT), the dyads exhibit fluorescence with high quantum yields. Formation of charge-transfer states triggers ISC and the formation of long-lived triplet excited states in the dyads. The excited state properties were studied by steady-state techniques and ultrafast pump-probe spectroscopy to determine the parameters of the observed processes. Structural information for various BADs was derived from single crystal X-ray structure determinations alongside DFT molecular geometry optimization, revealing the effects of mutual orientation of subunits on the photophysical properties. The calculations…

An efficient heat activating mediator with an enhanced specific absorption rate (SAR) value is attained via control of the iron oxide (Fe3O4) nanoparticle size from 3 to 32 nm. Monodispersed Fe3O4 nanoparticles are synthesized via a seed-less thermolysis technique using oleylamine and oleic acid as the multifunctionalizing agents (surfactant, solvent and reducing agent). The inductive heating properties as a function of particle size reveal a strong increase in the SAR values with increasing particle size up to 28 nm. In particular, the SAR values of ferromagnetic nanoparticles (>16 nm) are strongly enhanced with the increase of ac magnetic field amplitude than that for the superparamagnetic (3-16 nm) nanoparticles. The enhanced SAR values in the ferromagnetic regime are attributed to the synergistic contribution from the hysteresis and susceptibility loss. Specifically, the 28 nm Fe3O4 nanoparticles exhibit an enhanced SAR value of 801 W g-1 which is nearly an order higher than that of the commercially available nanoparticles.

By means of atomistic molecular dynamics simulations we investigate the behaviour of poly(N-isopropylacrylamide), PNIPAM, in water at temperatures below and above the lower critical solution temperature (LCST), including the undercooled regime. The transition between water soluble and insoluble states at the LCST is described as a cooperative process involving an intramolecular coil-to-globule transition preceding the aggregation of chains and the polymer precipitation. In this work we investigate the molecular origin of such cooperativity and the evolution of the hydration pattern in the undercooled polymer solution. The solution behaviour of an atactic 30-mer at high dilution is studied in the temperature interval from 243 to 323 K with a favourable comparison to available experimental data. In the water soluble states of PNIPAM we detect a correlation between polymer segmental dynamics and diffusion motion of bound water, occurring with the same activation energy. Simulation results show that below the coil-to-globule transition temperature PNIPAM is surrounded by a network of…

The effects of four heteroatoms (B, N, P, and S) with three doping patterns on graphene quantum dots (GQDs) are systematically investigated using time-dependent density functional theory (TD-DFT). The absorption spectra and HOMO-LUMO gaps are quantitatively analyzed to study the correlations between the optical properties and heteroatom doping of doped GQDs. Heteroatom doping can endow GQDs with various new optical and structural properties, depending on the dopants and doping configurations. Compared with the absorption spectra of pristine GQD, both N and S surface doping demonstrate a slight blue shift, whereas B and P doping lead to a blue shift for edge-doped GQDs with heteroatoms in a pentatomic ring. The absorption process is investigated along with excited state analysis, which includes the density of state, natural transition orbital, and charge difference density. The results indicate that large radius atoms assist charge transfer in the excited state and play an important role in recombining the electron density distribution in the doped GQDs.

We report an implementation of the linear vibronic coupling (LVC) model within the surface hopping dynamics approach and present utilities for parameterizing this model in a blackbox fashion. This results in an extremely efficient method to obtain qualitative and even semi-quantitative information about the photodynamical behavior of a molecule, and provides a new route toward benchmarking the results of surface hopping computations. The merits and applicability of the method are demonstrated in a number of applications. First, the method is applied to the SO2 molecule showing that it is possible to compute its absorption spectrum beyond the Condon approximation, and that all the main features and timescales of previous on-the-fly dynamics simulations of intersystem crossing are reproduced while reducing the computational effort by three orders of magnitude. The dynamics results are benchmarked against exact wavepacket propagations on the same LVC potentials and against a variation of the electronic structure level. Four additional test cases are presented to exemplify the broader…

Nucleation is an important, yet poorly understood step in soot formation. Here, the importance of reactive PAH dimerization in reducing soot nucleation reversibility is investigated by simulating soot formation in a so-called "nucleation" flame (P. Desgroux et al., Combust. Flame, 2017, 184, 153-166). There, inception of soot particles is prolonged at minimal subsequent growth. With only reversible PAH dimerization, the simulated soot concentration is negligible. Accounting however for PAH chemical bond formation after physical dimerization, stabilizes dimers by covalent bonds and increases the soot concentration by four orders of magnitude, in good agreement with Laser Induced Incandescence measurements. In particular, dimers of benzene with benzene, phenylacetylene, naphthalene, toluene, acenaphthylene and cyclopentapyrene make significant contributions to the total soot concentration. The abundance of dimers with small PAHs highlights the dominant role of PAH concentration over their size and dispersion forces on dimer formation. Higher collision factors are used for irreversible…

Alkylated aromatics constitute a significant fraction of the components commonly found in commercial fuels. Toluene is typically considered as a reference fuel. Together with n-heptane and iso-octane, it allows for realistic emulations of the behavior of real fuels by the means of surrogate mixture formulations. Moreover, it is a key precursor for the formation of poly-aromatic hydrocarbons, which are of relevance to understanding soot growth and oxidation mechanisms. In this study the POLIMI kinetic model is first updated based on the literature and on recent kinetic modelling studies of toluene pyrolysis and oxidation. Then, important reaction pathways are investigated by means of high-level theoretical methods, thereby advancing the present knowledge on toluene oxidation. H-Abstraction reactions by OH, HO2, O and O2, and the reactivity on the multi well benzyl-oxygen (C6H5CH2 + O2) potential energy surface (PES) were investigated using electronic structure calculations, transition state theory in its conventional, variational, and variable reaction coordinate forms (VRC-TST), and…

ESIPT for white-light generation from all-solution-processed OLEDs.

Herein, density functional theory (DFT) computations were performed to investigate the discrete dimer of a mono-substituted anthracene derivative (2-TA-AN), which exhibited highly efficient pure excimer fluorescence in its crystal form. As a more practical model, its geometry, potential energy curve and excited state property were systematically calculated to better understand the excimer formation process and photophysical properties. The compressed excimer geometry is responsible for the highly efficient excimer emission, arising from the enhanced rigidity that greatly suppresses its non-radiative vibrations. Potential energy curves along three directions reveal the non-uniqueness of excimer formation along the long axis of anthracene, which is in a good agreement with the experimental findings. Upon decreasing the displacement, the intermonomer charge-transfer (CT) component gradually increased towards an approximately equivalent hybridization with the locally-emissive (LE) state of the monomer during the formation of the excimer. The excimer emission wavelength versus…

In this work, using density functional theory we investigated systematically the electronic properties and Schottky barrier modulation in a multilayer graphene/bilayer-GaSe heterostructure by varying the interlayer spacing and by applying an external electric field. At the equilibrium state, the graphene is bound to bilayer-GaSe by a weak van der Waals interaction with the interlayer distance d of 3.40 Å with the binding energy per carbon atom of -37.71 meV. The projected band structure of the graphene/bilayer-GaSe heterostructure appears as a combination of each band structure of graphene and bilayer-GaSe. Moreover, a tiny band gap of about 10 meV is opened at the Dirac point in the graphene/bilayer-GaSe heterostructure due to the sublattice symmetry breaking. The band gap opening in graphene makes it suitable for potential applications in nanoelectronic and optoelectronic devices. The graphene/bilayer-GaSe heterostructure forms an n-type Schottky contact with the Schottky barrier height of 0.72 eV at the equilibrium interlayer spacing. Furthermore, a transformation from the n-type…

The first-principle theory has been used to predict a new metal-free single atom electrocatalyst for N 2 reduction.

(ω) non-linear third order contribution of bulk liquid water, here calculated for several charged interfaces and shown to be universal. The χ(ω) contribution therefore has the same origin in terms of molecular normal modes at any charged interface. The molecular interpretation of χ(ω) is hence at the heart of the unambiguous molecular comprehension and interpretation of the measured total SFG signal at any charged interface.

agree well with experimental data, whereas for the free-base porphyrin, naphthalene, and the polyacenes, the obtained quantum yields significantly differ from the experimental values, because the FC and adiabatic approximations are not accurate for these molecules.

Biomolecular condensates undergirded by phase separations of proteins and nucleic acids serve crucial biological functions. To gain physical insights into their genetic basis, we study how liquid-liquid phase separation (LLPS) of intrinsically disordered proteins (IDPs) depends on their sequence charge patterns using a continuum Langevin chain model wherein each amino acid residue is represented by a single bead. Charge patterns are characterized by the "blockiness" measure κ and the "sequence charge decoration" (SCD) parameter. Consistent with random phase approximation (RPA) theory and lattice simulations, LLPS propensity as characterized by critical temperature Tcr* increases with increasingly negative SCD for a set of sequences showing a positive correlation between κ and -SCD. Relative to RPA, the simulated sequence-dependent variation in Tcr* is often-though not always-smaller, whereas the simulated critical volume fractions are higher. However, for a set of sequences exhibiting an anti-correlation between κ and -SCD, the simulated Tcr*'s are quite insensitive to either…

As a typical member of transition-metal dichalcogenides (TMDs), VS2 has been evaluated as the aluminum-ion battery cathode for the first time. To further improve their stability and conductivity, the as-prepared VS2 nanosheets are modified with graphene (denoted as G-VS2). And the G-VS2 electrode delivers a high initial discharge capacity of 186 mA h g-1 at 100 mA g-1 with almost 100% coulombic efficiency after 50 cycles. Furthermore, an explicit intercalation mechanism of Al into G-VS2 has been investigated by in/ex situ XRD, ex situ Raman and TEM spectroscopy. And the G-VS2 composite proves to be an impressive cathode material for aluminum-ion batteries (AIBs). This work might put forward the application of TMDs in AIBs.

A Janus MoSSe monolayer, synthesized recently though the chemical vapor deposition method [A. Y. Lu, H. Zhu, J. Xiao, C. P. Chuu, Y. Han, M. H. Chiu, C. C. Cheng, C. W. Yang, K. H. Wei Y. Yang, Y. Wang, D. Sokaras, D. Nordlund, P. Yang, D. A. Muller, M. Y. Chou, X. Zhang and L. J. Li, Nat. Nanotechnol., 2017, 12, 744-749], has drawn considerable attention as a new two-dimensional (2D) material owing to its fascinating electronic and optical properties. In this study, based on first-principles calculations, we systematically explore for the first time the performance of Janus MoSSe monolayers as a channel material contacting with graphene to form van der Waals (vdW) heterostructures. Our calculations show that the intrinsic electronic properties of both the graphene and MoSSe monolayer are preserved well in our proposed two graphene/MoSSe heterostructures (i.e. G/SMoSe and G/SeMoS heterostructures), and n-type Schottky contacts with a small Schottky barrier height (SBH) are formed at their respective interfaces. An analytical model is presented for the barrier heights. Moreover, the…

To identify reliable molecular design principles for energy level tuning in donor/acceptor conjugated polymers (CPs), we studied the governing factors by means of ab initio calculations based on density-functional theory (DFT). We investigated a series of CPs in which we independently and systematically varied the electron withdrawing power of the acceptor unit and the electron donating power of the donor unit, while maintaining the same conjugated chain conformation. We observed that the introduction of a stronger acceptor unit, while keeping the same donor unit in the CP, lowers the LUMO level, but leaves the HOMO level almost unchanged. Conversely, enhancing the strength of the donor unit for the same acceptor unit raises the HOMO level, while maintaining the LUMO level. We identified strong correlations between the frontier orbital energy levels and the degree of orbital localization, which depends on the electron donating or withdrawing power of the molecular groups carrying the orbitals. Moreover, the HOMO/LUMO gap of the CP is directly proportional to the charge transfer…

Perovskite solar cells (PSCs) based on organic-inorganic metal halide perovskites are a recent ground-breaking advancement in attaining power conversion efficiencies exceeding 21%. However, the toxicity of lead in these PSCs could be a deterrent for large-scale development due to the environmental concerns. The methylammonium tin triiodide (CH3NH3SnI3) perovskite has been successfully employed in lead-free PSCs as an alternative to CH3NH3PbI3 perovskite. The PSCs have mostly been realized with a highly expensive spiro-OMeTAD hole-transporting material (HTM). Herein, copper thiocyanate (CuSCN) was implemented as a HTM instead of the highly expensive spiro-OMeTAD counterpart. The results show that CuSCN is a promising HTM for the lead-free CH3NH3SnI3-based PSCs. We investigated and optimized the parameters of the lead-free CH3NH3SnI3-based PSCs with the CuSCN HTM. The simulated device shows a power conversion efficiency exceeding 26% under AM 1.5G illumination and an absorption onset up to 1080 nm. The reported CH3NH3SnI3-based PSCs provide a viable path to the realization of…

"MXene", a new class of two dimensional materials, has attracted considerable research interest due to its unusual chemical bonding pattern as well as promising technological applications. Like other 2D materials, very recently, these classes of materials were also found to be prone to structural defects, thus altering the electronic and transport properties of the host. Using extensive first-principles based simulations, we investigated the structural and magnetoelectronic (i.e., magnetic and electronic) behaviour of the most probable point defects in these MXene systems, such as single vacancies and Schottky type double vacancies. Defect formation energies appeared to be strongly dependent upon local chemical bonding and the nature of reconstruction. Moreover, this layered material exhibited prominent metal to semiconductor or semiconductor to metal transition depending upon the type of the system or the defect. Moreover, a few of the defective MXenes become magnetic in nature due to the presence of unpaired electrons in the spin split d-orbitals. Thus, it is evident that…

An experimental analysis based on very-low-frequency (VLF) impedance spectra and the Onsager reciprocal relations is combined with advanced analysis of dynamic correlations in atomistic molecular simulations in order to investigate Li+ transport in solvate ionic liquids (SILs). SILs comprised of an equimolar mixture of a lithium salt with glyme molecules are considered as a promising class of highly concentrated electrolytes for future Li-ion batteries. Both simulations and experiments on a prototypical Li-bis(trifluoromethanesulfonyl)imide (TFSI) salt/tetraglyme mixture show that while the ionic conductivity and the Li+ transport number are quite high, the Li+ transference number under 'anion-blocking conditions' is extremely low, making these electrolytes rather inefficient for battery applications. The contribution of cation-anion correlation to the total ionic conductivity has been extracted from both studies, revealing a highly positive contribution due to strongly anti-correlated cation-anion motions. Such cation-anion anti-correlations have also been found in standard ionic…

Graphene oxide (GO) reinforced cement nanocomposites open up a new path for sustainable concrete design. In this paper, reactive force-field molecular dynamics was utilized to investigate the structure, reactivity and interfacial bonding of calcium silicate hydrate (C-S-H)/GO nanocomposite functionalized by hydroxyl (C-OH), epoxy (C-O-C), carboxyl (COOH) and sulfonic (SO3H) groups with a coverage of 10%. The silicate chains in the hydrophilic C-S-H substrate provided numerous non-bridging oxygen sites and counter ions (Ca ions) with high reactivity, which allowed interlayer water molecules to dissociate into Si-OH and Ca-OH. On the other hand, protons dissociated from the functional groups and transferred to non-bridging sites in C-S-H, producing carbonyl (C[double bond, length as m-dash]O) and Si-OH. The de-protonation degree of the different groups in the vicinity of the C-S-H surface was in the following order: COOH (SO3H) > C-OH > C-O-C. In the GO-COOH sheet, most COOH groups were de-protonated to COO- groups, which enhanced the polarity and hydrophilicity of the GO sheets and…

Yolk shell Mn2O3@Mn5O8 was prepared through a facile synthetic procedure and was demonstrated to be a highly efficient and stable catalyst in peroxymonosulfate (PMS) activation for the catalytic degradation of organic contaminants. Mn2O3@Mn5O8 exhibits much improved activity compared with other classic manganese catalysts such as ε-MnO2, Mn2O3 and Mn3O4, and this performance was due to its yolk shell structure, mesoporous shell, well-defined interior voids, particular particle size and mixed valence states. The long-term stability and efficiency of Mn2O3@Mn5O8 was observed in activating PMS to generate sulfate radicals for the removal of various organic pollutants such as phenol, 4-chlorophenol (4-CP), 2,4-dichlorophenol (2,4-DP) and 2,4,6-trichlorophenol (2,4,6-TCP) in aqueous medium. The effects of the initial solution pH, influence of anions, catalyst stability and the temperature effect on 4-CP degradation were also investigated. Furthermore, electron paramagnetic resonance (EPR) spectroscopy and radical quenching tests were employed to investigate sulfate, hydroxyl, superoxide…

MXenes, a new class of two-dimensional materials, arouse great interest due to their diverse chemistries, superior electrical conductivity and stability. Recently, the nanostructures of MXenes such as nanoribbons and nanodots have been synthesized in experiments, which show peculiar properties and expand the application spectrum of MXenes. Here we exploited MXene nanoribbons as potential electrocatalysts for the hydrogen evolution reaction (HER) by considering 12 kinds of MXene systems. Our first-principles calculations showed that the edges of the MXene nanoribbons can adsorb hydrogen species and serve as the reaction sites for hydrogen evolution. The binding strength of the ribbon edge is correlated with the d band center of metal atoms in MXenes. In particular, the nanoribbons of Ti3C2 and solid solution (Ti,Nb)C exhibit high activity for the HER with the adsorption free energy approaching zero and Tafel barrier below 0.42 and 0.17 eV, respectively. The low barrier is owing to the prominent charge transfer from the edge metal atoms to the H* reactants in the transition state.…

Is two-photon catalysis better than one-photon? The sequential absorption of two photons enables the production of highly reducing or oxidizing species. The short lifetime of the excited states and the photostability of the photocatalyst pose significant limitations to this approach.

The reaction of iron(ii) and hydrogen peroxide, namely the Fenton reaction, is well-known for its strong oxidizing capability. While the Fenton reactions are ubiquitous and have wide applications in many areas, the detailed mechanism, especially the nature of the reactive intermediates responsible for oxidation, is not completely clear. In this work, the performances of various density functional theory (DFT) methods on the relative energies of key Fenton intermediates are evaluated. The DFT method selected from the benchmark study is then exploited to investigate the aqueous Fenton reactions in different pH conditions. The results show that at pH > 2.2, the major Fenton oxidants are high-valent oxoiron(iv) aquo complexes. However, depending on the pH conditions, these complexes can exist in three protonation states that display quite different oxidation reactivities. The oxidizing power of FeIV[double bond, length as m-dash]O is found to be principally determined by the total charge of the ligands and is less influenced by the axial ligand effect. Moreover, the calculations reveal…

One of the major hurdles of Ni-based microwave absorbing materials is the preparation of two-dimensional (2D) Ni flakes that can improve magnetic anisotropy to tune complex permeability. In this study, we successfully synthesized porous 2D sponge-like Ni/derivative heterostructures composed of Ni, NiO and Ni(OH)2 through a controllable hydrogen reduction method. Thanks to the larger grain size of the Ni/derivative heterostructure prepared at 600 °C (Ni-600) under hydrogen flow, good magnetic properties and high magnetic loss could be obtained, which is beneficial for the enhancement of microwave absorption properties. For the Ni-600 samples, the minimal reflection loss (RL) is -37.3 dB at 7.1 GHz and the effective bandwidth (RL < -10 dB, 90% microwave dissipation) could be tuned in the range of 4.5-18.0 GHz with the thickness of 1.5-4.5 mm. High attenuation ability, including dielectric loss and magnetic loss, and good impedance matching are the requirements for excellent microwave absorption properties. In addition, the porous 2D heterostructure flake structure also significantly…

Motivated by the recent success in the experimental synthesis of two-dimensional group-III monochalcogenides, we investigate the structural, electronic and thermoelectric properties of GaS, GaSe and GaTe monolayers based on the first-principles approach by using density functional theory and the semi-classical Boltzmann transport equation. The electronic band structures demonstrate that the GaS, GaSe, and GaTe monolayers are wide bandgap semiconductors having an indirect bandgap of 3.73 eV, 3.27 eV, and 2.46 eV respectively. We have evaluated the thermoelectric properties comprising the Seebeck coefficient, electrical conductivity per relaxation time, electronic thermal conductivity per relaxation time, electronic specific heat, thermoelectric figure of merit and power factor at various temperatures from 50 K to 800 K. It is found that GaS, GaSe and GaTe monolayers could be suitable candidates for low temperature efficient thermoelectric materials because of the high value of the thermoelectric figure of merit below room temperature.

Operando neutron reflectometry measurements were carried out to study the insertion of lithium into amorphous silicon film electrodes during cyclic voltammetry (CV) experiments at a scan rate of 0.01 mV s-1. The experiments allow mapping of regions where significant amounts of Li are incorporated/released from the electrode and correlation of the results to modifications of characteristic peaks in the CV curve. High volume changes up to 390% accompanied by corresponding modifications of the neutron scattering length density (which is a measure of the average Li fraction present in the electrode) are observed during electrochemical cycling for potentials below 0.3 V (lithiation) and above 0.2 V (delithiation), leading to a hysteretic behaviour. This is attributed to result from mechanical stress as suggested in the literature. Formation and modification of a surface layer associated with the solid electrolyte interphase (SEI) were observed during cycling. Within the first lithiation cycle the SEI grows to 120 Å for potentials below 0.5 V. Afterwards a reversible and stable…

Understanding and controlling non-covalent interactions associated with solvent molecules and redox-inactive ions provide new opportunities to enhance the reaction entropy changes and reaction kinetics of metal redox centers, which can increase the thermodynamic efficiency of energy conversion and storage devices. Here, we report systematic changes in the redox entropy of one-electron transfer reactions including [Fe(CN)6]3-/4-, [Fe(H2O)6]3+/2+ and [Ag(H2O)4]+/0 induced by the addition of redox inactive ions, where approximately twenty different known structure making/breaking ions were employed. The measured reaction entropy changes of these redox couples were found to increase linearly with higher concentration and greater structural entropy (having greater structure breaking tendency) for inactive ions with opposite charge to the redox centers. The trend could be attributed to the altered solvation shells of oxidized and reduced redox active species due to non-covalent interactions among redox centers, inactive ions and water molecules, which was supported by Raman spectroscopy.…

Surface energy is a fundamental property of metallic nanoparticles (MeNPs), which plays a crucial role in nucleation and growth and has strong implications for the application and environmental impact of MeNPs. Surface energy (J m-2) can be size dependent, but experimental data on surface energy trends for MeNPs are inconclusive. Computational chemistry may resolve the issue, but the location and area of the surface used for scaling, which dramatically influences the outcome and interpretation, has not been properly investigated. The size dependency of the surface energy can only be determined by scaling to the thermodynamic surface of tension. To identify this, we have derived a generalized Tolman approach for non-spherical particles, which is used to analyze the thermodynamic consistency of various surface definitions. Only the physical surface, defined here, is consistent with the surface of tension. Scaling of recent computational data for faceted MeNPs to this surface yields a low size dependency of surface energy, in good agreement with the Tolman lengths corresponding to its…

We apply the density-functional theory to study various phases (including non-magnetic (NM), anti-ferromagnetic (AFM), and ferromagnetic (FM)) in monolayer magnetic chromium triiodide (CrI3), a recently fabricated 2D magnetic material. It is found that: (1) the introduction of magnetism in monolayer CrI3 gives rise to metal-to-semiconductor transition; (2) the electronic band topologies as well as the nature of direct and indirect band gaps in either AFM or FM phases exhibit delicate dependence on the magnetic ordering and spin-orbit coupling; and (3) the phonon modes involving Cr atoms are particularly sensitive to the magnetic ordering, highlighting distinct spin-lattice and spin-phonon coupling in this magnet. First-principles simulations of the Raman spectra demonstrate that both frequencies and intensities of the Raman peaks strongly depend on the magnetic ordering. The polarization dependent A1g modes at 77 cm-1 and 130 cm-1 along with the Eg mode at about 50 cm-1 in the FM phase may offer a useful fingerprint to characterize this material. Our results not only provide a…

Investigation of the behaviour of deep eutectic solvents (DESs) as novel green solvents in the presence of other solvents is of great interest. In this study the behaviour of a common natural DES, namely choline chloride-glycerol deep eutectic solvent (GDES), was studied in the presence of water. A detailed study of the association of the two solvents was performed by integration of two vibrational spectroscopic methods (FTIR and Raman spectroscopy) followed by multivariate analysis. Moreover, a binary mixture of glycerol (Gly) as one of the liquid constituents of GDES and water was explored under the same conditions. A quintuplet and ternary systems were resolved for GDES-water and Gly-water probes, respectively, using multivariate analysis of global data (multi-technique and multi-experiment data arrangements). The results confirmed that in the presence of water the GDES showed different behaviour from its components. Therefore, a DES can be introduced as an independent solvent with its unique properties. Also, different H-bond interaction energies of GDES and its pure components…

Many complexes of the type BMX, (where B is a Lewis base such as H2, N2, ethyne, ethene, cyclopropane, H2O, H2S, PH3, or NH3, M is a coinage-metal atom Cu, Ag or Au, and X is a halogen atom) have now been characterised in the gas phase through their rotational spectra. It is pointed out that, for a given B, such complexes have angular geometries that are isomorphous with those of their hydrogen- and halogen-bonded counterparts BHX and BXY, respectively. Since the MX are, like the B, HX and XY referred to, closed-shell molecules, the complexes BMX also involve a non-covalent bond. Therefore, the name 'coinage-metal' bond is suggested for the non-covalent interaction in BMX, by analogy with hydrogen and halogen bonds. A generalised definition that covers all non-covalent bonds is also presented.

The importance of reliable battery diagnostic systems has grown substantially in recent years as a result of the use of high power Li-ion battery packs in an increasingly diverse range of applications. Here, spatially resolved ultrasound acoustic measurements are used to analyse the condition of Li-ion electrodes. Ultrasonic measurements are performed on a commercial mobile phone battery over the full operating voltage window with the lithiation and delithiation of electrodes observed at 36 locations on the surface of the cell. X-ray computed tomography was performed on the cell to ascertain the internal architecture and features that enabled the architecture of the battery to be correlated with the acoustic signature. Analyses of the acoustic signals obtained suggest that the anode and cathode layers can be identified by examining the change in attenuation associated with the charging process. It is also seen that expansions of the electrode layers are inhibited by the presence of the anode current collecting tab in the battery which leads to spatial inhomogeneities in the…

and the type of oxygen functional groups was adjusted by free radicals during the preparation of GQDs. The degree of reduction and content of surface oxygen groups were determined by X-ray photoelectron spectroscopy (XPS), and the antioxidant activity was obtained by scavenging of 1,1-diphenyl-2-picryl-hydrazyl (DPPH˙) and hydroxyl (˙OH) free radicals. Based on the analysis of XPS, Raman, and Fourier-transform infrared (FT-IR) spectra, the relationship between antioxidant activity and the surface oxygen groups of GQDs was obtained, and the antioxidant mechanism of GQDs was revealed with a particular specification of each oxygen group in the antioxidant activity of GQDs, meanwhile, the biocompatibility of GQDs has been demonstrated by cytotoxicity tests. We hope that our results will provide a new insight into a complete antioxidant mechanism of GQDs.

Photo-degradation of organic pollutants plays an important role in their removal from the environment. This study provides an experimental and theoretical account of the reaction of singlet oxygen O2(1Δg) with the biodegradable-resistant species of phenol in an aqueous medium. The experiments combine customised LED-photoreactors, high-performance liquid chromatography (HPLC), and electron paramagnetic resonance (EPR) imaging, employing rose bengal as a sensitiser. Guided by density functional theory (DFT) calculations at the M062X level, we report the mechanism of the reaction and its kinetic model. Addition of O2(1Δg) to the phenol molecule branches into two competitive 1,4-cycloaddition and ortho ene-type routes, yielding 2,3-dioxabicyclo[2.2.2]octa-5,7-dien-1-ol (i.e., 1,4-endoperoxide 1-hydroxy-2,5-cyclohexadiene) and 2-hydroperoxycyclohexa-3,5-dien-1-one, respectively. Unimolecular rearrangements of the 1,4-endoperoxide proceed in a facile exothermic reaction to form the only experimentally detected product, para-benzoquinone. EPR revealed the nature of the oxidation…

Inspired by reports of redox active interphases in all-solid-state batteries employing fast conducting lithium thiophosphate solid-state electrolytes, we investigated the compositional depolymerization of interconnected PS4 tetrahedra in (Li2S)x(P2S5)100-x glasses (50 < x < 80) by X-ray absorption spectroscopy (XAS) and X-ray photoelectron spectroscopy (XPS). Based on the observed energy shifts with composition, we present a structural model of the three different bonding types describing the structures of either crystalline or amorphous thiophosphates. This model and reference data characterizes amorphous thiophosphates based on their inter-tetrahedral connectivity and helps to distinguish malign decomposition reactions from reversible redox reactions at the cathode active material/solid-state electrolyte interface. This work highlights the importance of a combined analytical approach and appropriate reference compounds to elucidate the interface reactions in all-solid-state battery systems.

Akin to three dimensional (3D) multiferroics, two dimensional (2D) piezoelectric materials with intrinsic magnetic properties are promising applications in nanoscale spintronic devices. In this study, 2D magnetic transition metal dichalcogenides (VS2, VSe2, and Janus-VSSe) have been investigated by the first principles method for their structural, magnetic, electronic, and piezoelectric properties. H type Janus-VSSe has been shown to be more stable than the T type, and dynamically stable through phonon frequency analysis. Our calculations show that H type Janus-VSSe is not only a magnetic semiconductor but also exhibits appreciable in-plane and vertical piezoelectricity. Additionally, H type VS2 and VSe2 also show high in-plane piezoelectricity. The calculated values of in-plane piezoelectricity for these magnetic materials are higher than traditional 3D piezoelectric materials such as α-quartz. The coexistence of magnetism and piezoelectricity in H type VS2, Janus-VSSe, and VSe2 makes them promising piezoelectric materials in nanoscale spin devices.

via the formation of hydrogen bonds, indicating that the use of non-aqueous solvents can break the scaling relationship between limiting potential and binding energies.

oxides in the cubic perovskite structure. Our findings support a previously reported trend that rationalizes the observed lower bound in oxygen evolution (OER) overpotentials from correlations in OH* and OOH* adsorption energies. In addition, we report hydrogen adsorption energies that may be used to estimate hydrogen evolution (HER) overpotentials along with potential metrics for electrochemical metastability in reducing environments. We also report and discuss trends between atom-projected density of states and adsorption energies, which may enable a design criteria from the local electronic structure of the active site.

S as compared to pure CuS at 300 K. These results therefore are expected to provide a new direction in improving ZT near 300 K.

Rapid conversion of oxygen into water is crucial to the operation of polymer electrolyte fuel cells and other emerging electrochemical energy technologies. Chemisorbed oxygen species play double-edged roles in this reaction, acting as vital intermediates on one hand and site-blockers on the other. Any attempt to decipher the oxygen reduction reaction (ORR) must first relate the formation of oxygen intermediates to basic electronic and electrostatic properties of the catalytic surface, and then link it to parameters of catalyst activity. An approach that accomplishes this feat will be of great utility for catalyst materials development and predictive model formulation of electrode operation. Here, we present a theoretical framework for the multiple interrelated surface phenomena and processes involved, particularly, by incorporating the double-layer effects. It sheds light on the roles of oxygen intermediates and gives out the Tafel slope and exchange current density as continuous functions of electrode potential. Moreover, it develops the concept of a rate determining term, which…

Deep eutectic solvents (DESs) have emerged as a set of intrinsically "designer solvents" for many bio-applications such as DNA nanotechnology and biocatalysis. However, the high viscosity of DESs tends to prevent bioactive components from being incorporated into the solvent. Although dilution with water may effectively reduce the viscosity of DES, the effect of water on its cooperative hydrogen-bonding network has not been evaluated systematically. This study conducted a series of molecular dynamics simulations on the DES made of choline chloride and glycerol at different hydration levels. We discovered a Janus-faced role of water in defining the interactive network between choline chloride and glycerol. Chloride played a critical role in bridging choline and glycerol in the anhydrous mixture. But the addition of water results in the decrease in the number of choline-chloride-glycerol supramolecular complexes and the number of hydrogen bonds between choline and glycerol, demonstrating the de-structuring effect of water. Interestingly, we also found that water could link choline to…

The stacking of monolayers in the form of van der Waals heterostructures is a useful strategy for band gap engineering and the control of dynamics of excitons for potential nano-electronic devices.

The highly unusual state, 1(TT), is a coupled, double triplet state that has recently garnered significant attention. This multiexcitonic state can be formed by a quantum transition from a single-photon bright state in a variety of organic semiconducting materials. 1(TT)'s transient nature and similarity to independent triplets, however, has led to significant difficulties in characterization and prediction of its properties. Recent progress describing 1(TT) from theory and experiment are breaking through these difficulties, and have greatly advanced our comprehension of this state. Starting from the early description of 1(TT) in polyenes, this perspective discusses formation mechanisms, spectroscopic signatures, and the scope of intertriplet interactions. When employing singlet fission to generate charge carriers in a solar cell, 1(TT) has a central role. Due to the variety of coupling strengths between triplet states in 1(TT) amongst different chromophores, two different strategies are discussed to enable efficient charge carrier extraction. Continued growth in our understanding…

A zwitterion, an ion pair where cation and anion are covalently tethered, is known to be a type of salt. These ions have not been recognised as interesting, but they are physicochemically unique and fascinating ions. In the present review, some functional zwitterions derived from ionic liquids are mentioned to emphasise the usefulness of the tethering of the component cations and anions of ionic liquids. Basic properties, advantages and disadvantages after the functional design of zwitterions, and some applications are summarised.

Atmospheric pressure plasmas are sources of biologically active oxygen and nitrogen species, which makes them potentially suitable for the use as biomedical devices. Here, experiments and simulations are combined to investigate the formation of the key reactive oxygen species, atomic oxygen (O) and hydroxyl radicals (OH), in a radio-frequency driven atmospheric pressure plasma jet operated in humidified helium. Vacuum ultra-violet high-resolution Fourier-transform absorption spectroscopy and ultra-violet broad-band absorption spectroscopy are used to measure absolute densities of O and OH. These densities increase with increasing H2O content in the feed gas, and approach saturation values at higher admixtures on the order of 3 × 1014 cm-3 for OH and 3 × 1013 cm-3 for O. Experimental results are used to benchmark densities obtained from zero-dimensional plasma chemical kinetics simulations, which reveal the dominant formation pathways. At low humidity content, O is formed from OH+ by proton transfer to H2O, which also initiates the formation of large cluster ions. At higher humidity…

Considering the rapid development of experimental techniques for fabricating 2D materials in recent years, various monolayers are expected to be experimentally realized in the near future. Motivated by the recent research activities focused on the honeycomb arsenene monolayers, the stability and carrier mobility of non-honeycomb and porous allotropic arsenene are determined using first principles calculations. In addition to five honeycomb structures of arsenene, a total of eight other structures are considered in this study. An extensive analysis comprising energetics, phonon spectra and mechanical properties confirms that these structures are energetically and dynamically stable. All these structures are semiconductors with a broad range of band gaps varying from ∼1 eV to ∼2.5 eV. Significantly, these monolayer allotropes possess anisotropic carrier mobilities as high as several hundred cm2 V-1 s-1 which is comparable with well-known 2D materials such as black phosphorene and monolayer MoS2. Combining such broad band gaps and superior carrier mobilities, these monolayer allotropes…

We present a comprehensive study of the bulk and surface properties of transition metal carbides with rock salt structures and discuss their formation energies, electronic structure and potential catalytic activity.

The prevailing opinion in the literature is that the main mechanism of O/W nanoemulsion degradation is Ostwald ripening. Nevertheless, the experimental rates of Ostwald ripening are usually several orders of magnitude higher than the theoretical values. This suggests that other mechanisms, such as coalescence, flocculation and subsequent creaming, significantly influence nanoemulsion breakdown. We investigated O/W nanoemulsions stabilized by Brij 30 or by a mixture of Tween 80 and Span 80 and with liquid paraffin as a dispersed phase. The results indicate that Ostwald ripening is the main process leading to nanoemulsion coarsening only in nanoemulsions with low oil phase fractions of up to 0.05. For quasi-steady state conditions the rates of Ostwald ripening are equal to (1.5 ± 0.3) × 10-29 and (1.1 ± 0.3) × 10-29 m3 s-1 in nanoemulsions with Brij 30 and Tween 80 & Span 80, respectively. In nanoemulsions with oil phase fractions of 0.15-0.45, different mechanisms are identified. Flocculation prevails over other processes during the first days in nanoemulsions stabilized by Brij 30.…

Kerogen plays a central role in hydrocarbon generation in an oil/gas reservoir. In a subsurface environment, kerogen is constantly subjected to stress confinement or relaxation. The interplay between mechanical deformation and gas adsorption of the materials could be an important process for shale gas production but unfortunately is poorly understood. Using a hybrid Monte Carlo/molecular dynamics simulation, we show here that a strong chemo-mechanical coupling may exist between gas adsorption and mechanical strain of a kerogen matrix. The results indicate that the kerogen volume can expand by up to 5.4% and 11% upon CH4 and CO2 adsorption at 192 atm, respectively. The kerogen volume increases with gas pressure and eventually approaches a plateau as the kerogen becomes saturated. The volume expansion appears to quadratically increase with the amount of gas adsorbed, indicating a critical role of the surface layer of gas adsorbed in the bulk strain of the material. Furthermore, gas uptake is greatly enhanced by kerogen swelling. Swelling also increases the surface area, porosity, and…

The electrochemical oxidation of methane to methanol at remote oil fields where methane is flared is the ultimate solution to harness this valuable energy resource. In this study we identify a fundamental surface catalytic limitation of this process in terms of a compromise between selectivity and activity, as oxygen evolution is a competing reaction. By investigating two classes of materials, rutile oxides and two-dimensional transition metal nitrides and carbides (MXenes), we find a linear relationship between the energy needed to activate methane, i.e. to break the first C-H bond, and oxygen binding energies on the surface. Based on a simple kinetic model we can conclude that in order to obtain sufficient activity oxygen has to bind weakly to the surface but there is an upper limit to retain selectivity. Few potentially interesting candidates are found but this relatively simple description enables future large scale screening studies for more optimal candidates.

(PDA@BT) and core-satellite ultra-small platinum decorated PDA@BT (Pt@PDA@BT) were used as nanofillers. Compared with PDA@BT nanocomposites, the maximum discharged energy density of the Pt@PDA@BT nanocomposites is increased by nearly 70% because of the improved energy storage efficiency. This research provides a simple, promising and unique way to enhance energy storage capability of high-k polymer nanocomposites.

Ab initio simulations combined with the Berry phase method are employed to investigate ferroelectric polarization of tetragonal CsPbBr3 crystals by applying hydrostatic pressure varying from 0 to 19 GPa; we find that the object research belongs to the P4mm space group. The calculated results show that the materials undergo a paraelectric-ferroelectric phase transition when the pressure increases to a critical value 15 GPa. The polarization is strongly enhanced and attains a high value of about 23 μC cm-2, owing to the increase in the ionic and electric contributions to the polarization under compressive strain. We present a detailed theoretical investigation to analyze the origin of polarization. The ionic polarization is mainly ascribed to the central displacements of Pb2+ cations and Br- anions induced by a highly distorted octahedral PbBr6- framework. Electronic structure calculations suggest that asymmetric hopping p orbital electrons of Br(3) ions are responsible for the enhancement in electric polarization. These discoveries suggest that tetragonal CsPbBr3 has significant…

) on α-phase as well as β-phase tellurene sheets. Our calculations shows that most adatoms are chemisorbed on tellurene sheets with large adsorption energies. Moreover, some of the adatoms are observed to give rise to distinct structural deformations and even local reconstructions. We report that a variety of electronic states are induced by the adatoms, which implies that different electronic structures can be engineered by the adsorption of adatoms. In fact, n-type doping, p-type doping, half-metal, and spin-gapless semiconductor features can be acquired by doping adatoms on tellurene sheets. Our calculations also show that the five gas molecules are all physisorbed on tellurene sheets, and no splitting behaviors are observed. Therefore, the adsorption of the five gas molecules has a weak effect on the electronic properties of tellurene. To conclude, our results indicate that adatom engineering may be used to greatly expand the potential applications of 2D tellurene.

CeO2-Catalyzed C2H2 semihydrogenation reaction is a newly emerging catalytic reaction, but the reaction mechanism is not established. We herein report a comprehensive mechanistic study by in situ diffuse reflectance infrared Fourier transformed spectroscopy. Various types of surface species were observed to form upon C2H2 and C2H4 adsorption on CeO2 at different temperatures, including molecularly-adsorbed π-bonded and di-σ-bonded species, dissociatively-adsorbed species of C2H and C2H3, carbonates and formate species, and oligomers species, respectively. During the C2H2 semihydrogenation reaction, the CeO2 surface is partially reduced and strongly hydroxylated. Both O and Ce sites on CeO2 are capable of catalyzing C2H2 semihydrogenation reaction to C2H4, and the O site is more active than the Ce site. The reaction mechanism was elucidated with observed molecularly-adsorbed C2H2 species, a C2H3 intermediate and adsorbed C2H4 species on CeO2. The π-bonded C2H2 species at the O site was identified as the dominant active surface species for CeO2-catalyzed C2H2 semihydrogenation…

Active catalysts for nitrogen fixation (N2-fixation) have been widely pursued through constant efforts for industrial applications. Here, we report a family of catalysts, MXenes (M2X: M = Mo, Ta, Ti, and W; X = C and N), for application in N2-fixation based on density functional theory calculations. We find that the catalytic performance of MXenes strongly depends on the reaction energy in each reaction step. More exothermic steps lead to higher catalytic performance in the course of N2-fixation. We show that the reaction energy in N2-fixation is strongly affected by the charge transfer: (1) if N atoms gain more electrons in a step, the reaction is exothermic with a larger reaction energy; (2) if N atoms lose electrons in a step, the reaction is endothermic in general. We further show that Mo2C and W2C are highly active for N2-fixation due to their exothermic reactions and strong charge transfer, which may be applicable in the chemical-engineering industry.

It is demonstrated with help of 18 O 2 labeling that O (aq) is stable in water and can directly react with dissolved molecules.

The binding of two bio-active flavonoids, quercetin and rutin, with bovine hemoglobin (BHb) was investigated by multi-spectroscopic and computational (molecular docking and molecular dynamics simulation) studies. The two flavonoids were found to quench the intrinsic fluorescence of BHb through a static quenching mechanism. The binding constants at 288 K were observed to be (14.023 ± 0.73) × 104 M-1 and (7.848 ± 0.20) × 104 M-1, respectively for quercetin and rutin binding with BHb. Both rutin and quercetin were observed to increase the polarity around the Trp residues of BHb as indicated by synchronous and 3D spectral studies. No significant alterations in the secondary structural components of the protein were caused during the binding of the flavonoids as studied by CD and FTIR studies. The negative molar Gibbs free energies indicated the spontaneity of the interaction processes while the binding processes were characterized by a negative enthalpy change (ΔH) and a positive entropy change (ΔS). The possibility of energy transfer from the donor (BHb) to the acceptor molecules…

molecule activation and induce O-O bond scission. This work demonstrates that the defective monolayer MXene may serve as a promising sort of support to fabricate single atomic catalysts (SACs) for CO oxidation or other reactions, agreeing well with the experimental reports, which opens up a new avenue for the design and fabrication of SACs of MXene-based materials.

What is the underlying diffusion process governing the spreading dynamics and search strategies employed by amoeboid cells? Based on the statistical analysis of experimental single-cell tracking data of the two-dimensional motion of the Dictyostelium discoideum amoeboid cells, we quantify their diffusive behaviour based on a number of standard and complementary statistical indicators. We compute the ensemble- and time-averaged mean-squared displacements (MSDs) of the diffusing amoebae cells and observe a pronounced spread of short-time diffusion coefficients and anomalous MSD-scaling exponents for individual cells. The distribution functions of the cell displacements, the long-tailed distribution of instantaneous speeds, and the velocity autocorrelations are also computed. In particular, we observe a systematic superdiffusive short-time behaviour for the ensemble- and time-averaged MSDs of the amoeboid cells. Also, a clear anti-correlation of scaling exponents and generalised diffusivity values for different cells is detected. Most significantly, we demonstrate that the distribution…

CO adsorption on Cu(100), (110), and (111) surfaces has been extensively studied using Kohn-Sham density functional theory calculations. A holistic analysis of adsorption energies, charge transfer, and structural changes has been employed to highlight the variations in adsorption mechanisms upon changing the surface type and the adsorption site. Each surface, with its unique arrangement of atoms, resulted in a varying adsorbate behavior, although the same adsorption site is considered. This directly reflects the influence of the atomic arrangement on the substrate-adsorbate interactions. Site-interactions are rigorously investigated using molecular-orbital and charge transfer principles taking into account the fundamental interaction of frontier (5σ and 2π*) orbitals. Considering the effects of the surface atomic arrangement and density of metal interacting orbitals, along with the relative d-5σ and d-2π* energy spacings, the calculated adsorption preference to higher coordination sites is explained, which also revealed valuable interpretations to the well-known DFT CO adsorption…

Non-fullerene small molecular acceptors (NFSMAs) exhibit promising photovoltaic performance; however, their electron mobilities are still relatively lower than those of fullerene derivatives. The construction of a highly planar conjugated system is an important strategy to achieve high charge mobility. In chemical parlance, it is tedious and costly to synthesize planar compounds by restricting the rotation at a specific bond. Recently, nonbonding intramolecular interactions, also termed "conformational locks," have been considered as an alternative way to achieve planar geometry. The successful implementation of this approach for designing polymers has been extensively reported. Recently, several examples of NFSMAs containing conformational locks have been presented in the literature. This situation encourages us to perform a detailed theoretical investigation in designing planar small molecular acceptors. Various nonbonding interactions were studied using accurate computational methods, and molecules with multiple nonbonding interactions showed high planarity. Planar acceptors…

Two widely used anticancer drugs, doxorubicin (DOX) and paclitaxel (PTX), possess distinct physical properties and chemotherapy specificity. In order to investigate their interaction mechanism with single-walled carbon nanotubes (SWCNTs), co-loading and releasing from the SWCNTs, all-atom molecular dynamics (MD) simulations were firstly carried out for different SWCNT systems, followed by binding free energy calculation with MM-PBSA. The results indicate that the co-loading of DOX and PTX onto the pristine SWCNT is exothermic and spontaneous. The DOX molecules predominantly interact with the SWCNT via π-π stacking through the conjugated aromatic rings, while the separated aromatic rings of PTX also primarily interact with the SWCNT through π-π stacking yet supplemented by an X-π (X = C-H, N-H and C[double bond, length as m-dash]O) interaction. Moreover, the strongest binding of DOX and PTX with the pristine SWCNT shows similar strength (ΔG: -32.0 vs. -33.8 kcal mol-1). For the chitosan functionalized SWCNT (f-SWCNT), the DOX and PTX molecules still prefer binding to the sidewall of…

Recently, van der Waals (vdW) two-dimensional heterostructures have attracted great attention. The combination structures demonstrate unique properties that individual layers do not possess, which foretell promising future applications. Here, we investigate the structural and electronic properties of SiC/graphene, SiC/MoS2, and graphene/SiC/MoS2 vdW heterostructures using first-principles calculations. The SiC/graphene interface forms a p-type Schottky contact, which can be turned into an n-type Schottky contact by applying an external electric field. Moreover, a transition from a Schottky to an Ohmic contact at the interface can be triggered by varying the interlayer distance or applying an external electric field. The SiC/MoS2 interface forms a type-II heterostructure, in which the recombination of photoexcited charges will be greatly suppressed. The transition from type-II to type-III band alignment can be realized in the SiC/MoS2 heterostructure by applying a biaxial strain. This heterostructure also shows excellent optical absorption abilities in the visible and far-infrared…

The effects of transition metal (Fe, Co and Ni) modification (adsorption, insertion and substitution) of CeO2 surfaces on oxygen vacancy formation and CH4 activation are studied on the basis of first principles calculations. The results indicate that the hollow, O-O-bridge and Ce-O-bridge sites are the most stable sites for Fe, Co and Ni atom adsorption on the CeO2(111) surface, and the double O-bridge, O-top and double O-bridge sites are the corresponding most favorable sites for the CeO2(110) surface. Most of the configurations that are generated by the transition metal modification of CeO2(111) and (110) surfaces are accompanied by the reduction of Ce4+ to Ce3+. Based on the calculated subsurface (SS) and sublayer (SL) oxygen vacancies of the CeO2(111) surface, the results show that the substitution of transition metals on the CeO2(111) surface can promote SS oxygen vacancy formation spontaneously, whereas the most stable adsorption of transition metal Fe and Ni atoms on the CeO2(111) surface can promote SL oxygen vacancy formation spontaneously. For the CeO2(110) surface, the…

Sodium aluminosilicate hydrate (NASH) gel is the primary adhesive constituent in environmentally friendly geopolymer. In this study, to understand the thermal behavior of the material, molecular dynamics was utilized to investigate the molecular structure, dynamic property, and mechanical behavior of NASH gel subjected to temperature elevation from 300 K to 1500 K. The aluminosilicate skeleton in NASH gel provides plenty of oxygen sites to accept H-bond from the invading water molecules. Upon heating, around 18.2% of water molecules are decomposed and produce silicate and aluminate hydroxyls. About 87% of hydroxyls are associated with the aluminate skeleton, which weakens the Al-O bonds and disturbs the O-Al-O angle and the local structure, transforming it from an aluminate tetrahedron to a pentahedron and octahedron. With increasing temperature, both Al-O-Si and Si-O-Si bonds are stretched to be broken and the network structure of the NASH gel is gradually transformed into a branch and chain structure. Furthermore, the self-diffusivity of water molecules and sodium dramatically…