The 100 most-cited articles in Optics Express, 2023

We demonstrate a fully submerged underwater LiDAR transceiver system based on single-photon detection technologies. The LiDAR imaging system used a silicon single-photon avalanche diode (SPAD) detector array fabricated in complementary metal-oxide semiconductor (CMOS) technology to measure photon time-of-flight using picosecond resolution time-correlated single-photon counting. The SPAD detector array was directly interfaced to a Graphics Processing Unit (GPU) for real-time image reconstruction capability. Experiments were performed with the transceiver system and target objects immersed in a water tank at a depth of 1.8 meters, with the targets placed at a stand-off distance of approximately 3 meters. The transceiver used a picosecond pulsed laser source with a central wavelength of 532 nm, operating at a repetition rate of 20 MHz and average optical power of up to 52 mW, dependent on scattering conditions. Three-dimensional imaging was demonstrated by implementing a joint surface detection and distance estimation algorithm for real-time processing and visualization, which achieved…

Histamine is a biologically active molecule that serves as a reliable predictor of the quality of fish. In this work, authors have developed a novel humanoid-shaped tapered optical fiber (HTOF) biosensor based on the localized surface plasmon resonance (LSPR) phenomenon to detect varying histamine concentrations. In this experiment, a novel and distinctive tapering structure has been developed using a combiner manufacturing system and contemporary processing technologies. Graphene oxide (GO)/multi-walled carbon nanotubes (MWCNTs) are immobilized on the HTOF probe surface to increase the biocompatibility of biosensor. In this instance, GO/MWCNTs are deployed first, then gold nanoparticles (AuNPs). Consequently, the GO/MWCNTs help to give abundant space for the immobilization of nanoparticles (AuNPs in this case) as well as increase surface area for the attachment of biomolecules to the fiber surface. By immobilizing AuNPs on the surface of the probe, the evanescent field can stimulate the AuNPs and excite the LSPR phenomena for sensing the histamine. The surface of the sensing probe…

An on-chip Mach-Zehnder interferometer (MZI) hydrogen sensor, applying a double-slot hybrid plasmonic (DSHP) waveguide composed of a Si waveguide and two Pd disks on both sides as the sensing arm, is designed. The optical confinement factor of the sensing area can be up to 87%. For the MZI hydrogen sensor with a DSHP waveguide of 14 µm, the sensitivity can be as high as 11.935 nm/%, corresponding to a free spectral range (FSR) of 15 nm. Furthermore, the sensor sensitivity is influenced by the MZI structure parameters, which is highly adjustable. The extinction ratio of the interference spectra can reach over 30 dB. A feasible solution is provided in this paper for highly sensitive hydrogen detection.

Chalcogenide hollow-core anti-resonant fibers (HC-ARFs) are a promising propagation medium for high-power mid-infrared (3-5 µm) laser delivery, while their properties have not been well understood and their fabrications remain challenging. In this paper, we design a seven-hole chalcogenide HC-ARF with touching cladding capillaries, which was then fabricated from purified As 40 S 60 glass by combining the “stack-and-draw” method with a dual gas path pressure control technique. In particular, we predict theoretically and confirm experimentally that such medium exhibits higher-order mode suppression properties and several low-loss transmission bands in the mid-infrared spectrum, with the measured fiber loss being as low as 1.29 dB/m at 4.79 µm. Our results pave the way for the fabrication and implication of various chalcogenide HC-ARFs in mid-infrared laser delivery systems.

In this work, authors have developed a portable, sensitive, and quick-response fiber optic sensor that is capable of detection of Aflatoxins B1 (AFB1) quantitatively and qualitatively. Using multi-mode fiber (MMF) and multi-core fiber (MCF), the MMF-MCF-MCF-MMF fiber structure based on symmetric transverse offset splicing and waist-expanded taper is fabricated. The evanescent waves are enhanced to form a strong evanescent field by etching the fiber surface with hydrofluoric acid. To successfully excite the localized surface plasmon resonance phenomenon, gold nanoparticles are deposited on the optical fiber probe's surface. Further, to modify the fiber optic probes, Niobium carbide (Nb 2 CT x ) MXene and AFB1 antibodies are functionalized. Nb 2 CT x MXene is employed to strengthen the biocompatibility of the sensor and increase the specific surface area of the fiber probe, while AFB1 antibody is used to identify AFB1 micro-biomolecules in a specific manner. The reproducibility, reusability, stability, and selectivity of the proposed fiber probe are tested and validated using various…

Photonic Time-Crystals (PTCs) are materials in which the refractive index varies periodically and abruptly in time. This medium exhibits unusual properties such as momentum bands separated by gaps within which waves can be amplified exponentially, extracting energy from the modulation. This article provides a brief review on the concepts underlying PTCs, formulates the vision and discusses the challenges.

In recent years, metasurfaces have attracted considerable interest for their unprecedented capabilities to manipulate intensity, phase, and polarization of an electromagnetic wave. Although metasurface-based wavefront modulation has achieved numerous successful results, implementation of multifunctional devices in a single metasurface still meet significant challenges. Here, a novel multilayer structure is designed using properties of vanadium dioxide (VO 2 ). Propagation phase and geometric phase are introduced in this structure to achieve multichannel holographic imaging in terahertz band. When the temperature is above 68°C, VO 2 becomes a metal and it plays a role in wavefront modulation for terahertz wave. The left-handed channel realizes a hologram letter L and the right-handed channel realizes a hologram letter R. When the temperature is below 68°C, VO 2 changes to an insulator, and electromagnetic wave is controlled by gold structures embedded inside a VO 2 film. In this case, hologram number 2 is realized in the left-handed channel and hologram number 6 appears in the…

Surface Plasmon Resonance (SPR) based fiber optic curvature sensors have the advantage of being insensitive to temperature and axial strain. However, they have the disadvantage of low sensitivity and small curvature detection range. To improve the performance of SPR curvature sensors, we propose an intensity-modulated microstructured optical fiber (MOF) curvature sensor. In this sensor, two no-core fibers (NCFs) are used as input-output couplers, and MOF with silver film deposited is used as sensing arms. The light in the cladding is used to excite the SPR, and the exciting resonant valley is extremely sensitive to slight bending changes. The performance of this sensor is investigated theoretically and experimentally. Numerical results show that its cladding pattern is more favorable in the excitation of SPR effects. Experimental results show that the cladding mode of MOF is very sensitive to curvature changes, thus giving it a great advantage in bending measurements. Its sensitivity reaches 0.18 dB/m -1 , and linearity reaches 0.995 in the curvature range of 0-30 m -1 . The sensor…

Abstract: In this article, we introduce a novel comb shaped plasmonic refractive index sensor that employs a ZrN-Insulator-ZrN configuration. The sensor is constructed using Zirconium Nitride (ZrN), an alternative refractory material that offers advantages over traditional metals such as silver and gold, as ZrN is Standard Complementary Metal Oxide Semiconductor (CMOS)-compatible and has tunable optical properties. The sensor has recorded a maximum sensitivity, figure of merit (FOM), and sensing resolution of 1445.46 nm/RIU, 140.96, and 6.91 × 10^−7 𝑅𝐼𝑈^-1, respectively. Beyond that, the integration of ZrN offers the sensor with various advantages, including higher hardness, thermal stability at high temperatures, better corrosion and abrasion resistance, and lower electrical resistivity, whereas traditional plasmonic metals lack these properties, curtailing the real-world use of plasmonic devices. As a result, our suggested model surpasses the typical noble material based (Metal-Insulator-Metal) MIM arrangement and offers potential for the development of highly efficient,…

All fiber Michaelson interferometer cascaded fiber Bragg grating (FBG) sensor for simultaneous measurement of trace dimethyl methyl phosphate and temperature is proposed. One end of the four-core fiber (FCF) is spliced with a multimode fiber (MMF), the other end is flattened and evaporated with silver film to enhance reflection, and the Michelson interference structure is formed. The grating is engraved in the single-mode fiber (SMF) core and spliced with MMF, then the Michelson interference cascaded FBG, FBG-MMF-FCF sensor is obtained. The sensing film, MnCo2O4 is coated on the surface of FCF, and the structure, elemental composition and morphology of MnCo2O4 were analyzed by X-ray diffraction, X-ray photoelectron spectroscopy and scanning electron microscopy. The sensitivity and the detection limit of DMMP are 86.44 dB/ppm and 0.1767 ppb, respectively. The response/recovery time is about 14/10 s. the temperature sensitivity can be compensated and calculated as 0.069 nm/°C. The sensor has good selectivity and stability, and has a good application prospect in high sensitivity…

We propose a double-layer graphene sheets side coupling to a strip of graphene to obtain the optical pulling or pushing force. Combined with coupled mode theory and finite-difference time-domain simulations, it is found that the conveyor belt effect can be realized in conjunction with the lateral optical equilibrium effect upon the radiation loss κ e equal to the intrinsic loss κ o . The maximum total optical force acting on the strip in the symmetric mode (S-mode) can be up to ∼5.95 in the unit of 1/ c and the anti-symmetric (AS-mode) mode reach ∼2.75 1/ c . The optical trapping potential U x and optical trapping force F x for the S-mode have a value around -22.5 k B T/W and 240 pN/W, while for the AS-mode can up to ∼-56 k B T/W and 520 pN/W, respectively. Our work opens a new avenue for optical manipulation with potential applications in optoelectronic devices and lab-on-a-chip platforms.

We propose a two-dimensional array made of a double-layer of vertically separated graphene nanoribbons. The transfer matrix method and coupled mode theory are utilized to quantitatively depict the transfer properties of the system. We present a way to calculate the radiative and the intrinsic loss factors, combined with finite-difference time-domain simulation, conducting the complete analytical analysis of the unidirectional reflectionless phenomenon. By adjusting the Fermi energy and the vertical distance between two graphene nanoribbons, the plasmonic resonances are successfully excited, and the unique phenomena can be realized at the exceptional points. Our research presents the potential in the field of optics and innovative technologies to create advanced optical devices that operate in the mid-infrared range, such as terahertz antennas and reflectors.

An absolute phase retrieval method based on fringe amplitude encoding is proposed. Different from the conventional intensity coding methods which are based on time division multiplexing with multiple additional auxiliary patterns, the proposed fringe order encoding strategy is codeword overlapping interaction based on space division multiplexing. It just directly encodes different fringe amplitudes for different periods in corresponding sinusoidal phase-shifting patterns to generate space division multiplexing composite sinusoidal phase-shifting patterns and quantifies the fringe amplitudes into four levels as encoding strategy, so it can retrieve absolute phase without any additional auxiliary patterns. To improve the anti-interference capability of the proposed method, a codeword extraction method based on image morphological processing is proposed to segment the grayscale. Consequently, both the phase-shifting sinusoidal deformed patterns and the single frame space division multiplexing four gray-level codewords for fringe order recognition can be extracted respectively from the…

Enhancement of light-matter interactions is of great importance for many nanophotonic devices, and one way to achieve it is to feed energy perfectly to the strongly coupled system. Here, we propose gap-perturbed dimerized gratings based on bulk WS 2 for flexible control of the strong coupling or self-hybridization of a quasi-bound state in the continuum (quasi-BIC) and exciton. The simulation results show that when a gap perturbation is introduced into the system resulting in the Brillouin zone folding, BIC transforms into quasi-BIC whose quality factor ( Q -factor) is related to the value of gap perturbation. The strong coupling results in the anti-crossover behavior of the absorption spectra, and thus a Rabi splitting energy of 0.235 eV is obtained. With the assistance of temporal coupled-mode theory, the conditions for the strong critical coupling are obtained, and finally successful achievement of polaritonic coherent perfect absorption in the proposed system. This work could provide ideas for enhancing light-matter interactions and strong theoretical support for all-optical…

Visible-light photonic integrated circuits (PICs) promise scalability for technologies such as quantum information, biosensing, and scanning displays, yet extending large-scale silicon photonics to shorter wavelengths has been challenging due to the higher losses. Silicon nitride (SiN) has stood out as the leading platform for visible photonics, but the propagation losses strongly depend on the film's deposition and fabrication processes. Current loss measurement techniques cannot accurately distinguish between absorption and surface scattering, making it difficult to identify the dominant loss source and reach the platform's fundamental limit. Here we demonstrate an ultra-low loss, high-confinement SiN platform that approaches the limits of absorption and scattering across the visible spectrum. Leveraging the sensitivity of microresonators to loss, we probe and discriminate each loss contribution with unparalleled sensitivity, and derive their fundamental limits and scaling laws as a function of wavelength, film properties and waveguide parameters. Through the design of the…

Chromium oxide (Cr2O3) is a promising material used in the applications such as photoelectrochemical devices, photocatalysis, magnetic random access memory, and gas sensors. But, its nonlinear optical characteristics and applications in ultrafast optics have not been studied yet. This study prepares a microfiber decorated with a Cr2O3 film via magnetron sputtering deposition and examines its nonlinear optical characteristics. The modulation depth and saturation intensity of this device are determined as 12.52% and 0.0176 MW/cm2. Meanwhile, the Cr2O3-microfiber is applied as a saturable absorber in an Er-doped fiber laser, and stable Q-switching and mode-locking laser pulses are successfully generated. In the Q-switched working state, the highest output power and shortest pulse width are measured as 12.8 mW and 1.385 µs, respectively. The pulse duration of this mode-locked fiber laser is as short as 334 fs, and its signal-to-noise ratio is 65 dB. As far as we know, this is the first illustration of using Cr2O3 in ultrafast photonics. The results confirm that Cr2O3 is a promising…

Recent advances in ultrafast, large-modulation photonic materials have opened the door to many new areas of research. One specific example is the exciting prospect of photonic time crystals. In this perspective, we outline the most recent material advances that are promising candidates for photonic time crystals. We discuss their merit in terms of modulation speed and depth. We also investigate the challenges yet to be faced and provide our estimation on possible roads to success.

We demonstrate 3D printed aspherical singlet and doublet microoptical components by grayscale lithography and characterize and evaluate their excellent shape accuracy and optical performance. The typical two-photon polymerization (2PP) 3D printing process creates steps in the structure which is undesired for optical surfaces. We utilize two-photon grayscale lithography (2GL) to create step-free lenses. To showcase the 2GL process, the focusing ability of a spherical and aspherical singlet lens are compared. The surface deviations of the aspherical lens are minimized by an iterative design process and no distinct steps can be measured via confocal microscopy. We design, print, and optimize an air-spaced doublet lens with a diameter of 300 µm. After optimization, the residual shape deviation is less than 100 nm for the top lens and 20 nm for the bottom lens of the doublet. We examine the optical performance with an USAF 1951 resolution test chart to find a resolution of 645 lp/mm.

Bound states in the continuum (BICs) with infinite quality factor (Q-factor) and significant field enhancement pave the way for realizing highly sensitive optical sensors with enhanced light-matter interactions on the nanoscale. However, current optical sensing methods are difficult to discriminate between isotropic and anisotropic media from resonance spectral lines, resulting in optical sensing methods still being limited to isotropic media. In this work, we demonstrate that BICs can be realized by modulating the period of structural units to convert BICs to QBICs without changing their space group symmetry, and propose a polarization-independent metasurfaces-based realization of highly sensitive refractive index sensors for isotropic and anisotropic media as well as discrimination. We propose a metasurface of tetrameric silicon nanoboxes with C4 symmetry as structural units to achieve the conversion of BICs to QBICs by modulating the period of structural units without changing the geometry of the structure. Two QBICs modes dominated by electric toroidal dipole and magnetic…

Single-photon light detection and ranging (LiDAR) has emerged as a strong candidate technology for active imaging applications. In particular, the single-photon sensitivity and picosecond timing resolution permits high-precision three-dimensional (3D) imaging capability through atmospheric obscurants including fog, haze and smoke. Here we demonstrate an array-based single-photon LiDAR system, which is capable of performing 3D imaging in atmospheric obscurant over long ranges. By adopting the optical optimization of system and the photon-efficient imaging algorithm, we acquire depth and intensity images through dense fog equivalent to 2.74 attenuation lengths at distances of 13.4 km and 20.0 km. Furthermore, we demonstrate real-time 3D imaging for moving targets at 20 frames per second in mist weather conditions over 10.5 km. The results indicate great potential for practical applications of vehicle navigation and target recognition in challenging weather.

We present a high-energy laser source consisting of an ultrafast thin-disk amplifier followed by a nonlinear compression stage. At a repetition rate of 5 kHz, the drive laser provides a pulse energy of up to 200 mJ with a pulse duration below 500 fs. Nonlinear broadening is implemented inside a Herriott-type multipass cell purged with noble gas, allowing us to operate under different seeding conditions. Firstly, the nonlinear broadening of 64 mJ pulses is demonstrated in an argon-filled cell, showing a compressibility down to 32 fs. Finally, we employ helium as a nonlinear medium to increase the energy up to 200 mJ while maintaining compressibility below 50 fs. Such high-energy pulses with sub-50 fs duration hold great promise as drivers of secondary sources.

We propose a two-dimensional exit pupil expansion (2D-EPE) design of a diffractive waveguide (DW) based on polarization volume grating (PVG). The designed waveguide structure and pupil expansion principle are introduced in this paper. The light propagation behavior and available field of view (FoV) of the proposed waveguide are investigated by simulations. In addition, the waveguide sample based on the proposed design is prepared, and an imaging system based on a monochromatic MicroLED projector is built for AR imaging experiments. The experimental results show that the prepared waveguide system can achieve a clear AR display with a diagonal FoV of 30° and obtain an exit pupil magnification of nearly 20 times compared to the entrance pupil size. The optical imaging efficiency was measured to be 3.85%, and the backward light leakage rate was as low as 8.7%. This work further enhances the feasibility and practicality of the PVG-waveguide technology and provides a promising candidate for AR-DW applications.

In this paper, we report on a high-power and widely tunable thulium-doped fiber laser (TDFL) based on a monolithic master oscillator power amplifier (MOPA) system. The master oscillator is a Tm fiber ring laser incorporating a tunable bandpass filter to realize narrow linewidth and wavelength tunable operation. The MOPA generated 1010 W ∼1039 W of output power over a tuning range of 107 nm from 1943 to 2050nm with slope efficiencies of more than 51% and spectra linewidth of ∼0.5 nm. Power stability (RMS) in ∼10 min scale is measured to be ∼0.52%. A diffraction-limited beam quality factor M 2 of ∼1.18 is measured at 920 W of laser output. Output power is pump-limited without the onset of parasitic oscillation or amplified spontaneous emission (ASE) even at the maximum power level. This is the first demonstration, to the best of our knowledge, on an all-fiber integrated wavelength-tunable TDFL at 2 µm with output power exceeding 1 kW.

The photonic in-memory computing architecture based on phase change materials (PCMs) is increasingly attracting widespread attention due to its high computational efficiency and low power consumption. However, PCM-based microring resonator photonic computing devices face challenges in terms of resonant wavelength shift (RWS) for large-scale photonic network. Here, we propose a PCM-slot-based 1 × 2 racetrack resonator with free wavelength shift for in-memory computing. The low-loss PCMs such as Sb 2 Se 3 and Sb 2 S 3 are utilized to fill the waveguide slot of the resonator for the low insertion (IL) and high extinction ratio (ER). The Sb 2 Se 3 -slot-based racetrack resonator has an IL of 1.3 (0.1) dB and an ER of 35.5 (8.6) dB at the drop (through) port. The corresponding IL of 0.84 (0.27) dB and ER of 18.6 (10.11) dB are obtained for the Sb 2 S 3 -slot-based device. The change in optical transmittance of the two devices at the resonant wavelength is more than 80%. No shift of the resonance wavelength can be achieved upon phase change among the multi-level states. Moreover, the…

We present a new type of dual optical frequency comb source capable of scaling applications to high measurement speeds while combining high average power, ultra-low noise operation, and a compact setup. Our approach is based on a diode-pumped solid-state laser cavity which includes an intracavity biprism operated at Brewster angle to generate two spatially-separated modes with highly correlated properties. The 15-cm-long cavity uses an Yb:CALGO crystal and a semiconductor saturable absorber mirror as an end mirror to generate more than 3 W average power per comb, below 80 fs pulse duration, a repetition rate of 1.03 GHz, and a continuously tunable repetition rate difference up to 27 kHz. We carefully investigate the coherence properties of the dual-comb by a series of heterodyne measurements, revealing several important features: (1) ultra-low jitter on the uncorrelated part of the timing noise; (2) the radio frequency comb lines of the interferograms are fully resolved in free-running operation; (3) we validate that through a simple measurement of the interferograms we can…

Novel back-illuminated modified uni-traveling-carrier photodiodes (MUTC-PDs) with wide bandwidth and high saturation power are demonstrated. The effect of cliff layer doping on the electric field distribution is investigated to achieve fast carrier transport. MUTC-PDs with miniaturized device diameter and low contact resistance are fabricated to improve the RC-limited bandwidth. Meanwhile, inductive peaking is implemented to further extend the bandwidth. PDs with 3-µm and 3.6-µm-diameter exhibit a ultrawide bandwidth of 230 GHz and 200 GHz, together with -4.94 dBm and -2.14 dBm saturation power at 220 GHz and 200 GHz, respectively.

This paper proposes and demonstrates an ultrasensitive refractive index (RI) sensor based on harmonic Vernier effect (HEV) and a cascaded Fabry-Perot interferometer (FPI). The sensor is fabricated by sandwiching a hollow-core fiber (HCF) segment between a lead-in single-mode fiber (SMF) pigtail and a reflection SMF segment with an offset of 37 µm between two fiber centers to form a cascaded FPI structure, where the HCF is the sensing FPI, and the reflection SMF is the reference FPI. To excite the HEV, the optical path of the reference FPI must be multiple times (>1) that of the sensing FPI. Several sensors have been made to conduct RI measurements of gas and liquid. The sensor's ultrahigh RI sensitivity of up to ∼378000 nm/RIU can be achieved by reducing the detuning ratio of the optical path and increasing the harmonic order. This paper also proved that the proposed sensor with a harmonic order of up to 12 can increase the fabricated tolerances while achieving high sensitivity. The large fabrication tolerances greatly increase the manufacturing repeatability, reduce production…

A novel dual-frequency modulated heterodyne quartz-enhanced photoacoustic spectroscopy (DFH-QEPAS) was demonstrated for what we believe to be the first time in this study. In traditional H-QEPAS, the frequency of modulated sinusoidal wave has a frequency difference (Δ f ) with the resonance frequency ( f 0 ) of a quartz tuning fork (QTF). Owing to the resonance characteristic of QTF, it cannot excite QTF to the strongest response. To achieve a stronger response, a sinusoidal wave with a frequency of f 0 was added to the modulation wave to compose a dual-frequency modulation. Acetylene (C 2 H 2 ) was chosen as the target gas to verify the sensor performance. The proposed DFH-QEPAS improved 4.05 times of signal-to-noise ratio (SNR) compared with the traditional H-QEPAS in the same environmental conditions.

The network traffic of data centers (DCs) has increased unprecedentedly with the rapid development of digital economy. However, the data transmission faces security threats in the distributed optical interconnection and intensive interaction of DC networks. In this paper, we propose a chaotic phase noise-like encryption algorithm using geometric shaping (GS) for coherent DC interconnections (DCIs). A GS constellation is used to improve transmission performance, and it is combined with coherent equalization algorithms to improve security performance. Then, a chaotic encryption is designed based on phase noise-like transformation (PNLT). The data are effectively scrambled, and the confusion level of phase can be increased. Finally, 216 Gb/s 8-quadrature amplitude modulation (8-QAM) encrypted data are successfully verified on a 240 km transmission link of DCIs. The results show that this scheme can achieve a bit error rate (BER) performance gain of 1.1 dB and provide a highly compatible solution for realizing security enhanced DCIs.

Broadband integrated thin-film lithium niobate (TFLN) electro-optic modulators (EOM) are desirable for optical communications and signal processing in both the O-band (1310 nm) and C-band (1550 nm). To address these needs, we design and demonstrate Mach-Zehnder (MZ) EOM devices in a hybrid platform based on TFLN bonded to foundry-fabricated silicon photonic waveguides. Using a single silicon lithography step and a single bonding step, we realize MZ EOM devices which cover both wavelength ranges on the same chip. The EOM devices achieve 100 GHz EO bandwidth (referenced to 1 GHz) and about 2-3 V.cm figure-of-merit ( V π L ) with low on-chip optical loss in both the O-band and C-band.

A compact fiber-optic temperature sensor with hybrid interferometers enhanced by the harmonic Vernier effect was proposed, which realized 36.9 times sensitization of the sensing Fabry-Perot interferometer (FPI). The hybrid interferometers configuration of the sensor consists of a FPI and a Michelson interferometer. The proposed sensor is fabricated by splicing the hole-assisted suspended-core fiber (HASCF) to the multi-mode fiber fused with the single-mode fiber, and filling polydimethylsiloxane (PDMS) into the air hole of HASCF. The high thermal expansion coefficient of PDMS improves the temperature sensitivity of the FPI. The harmonic Vernier effect eliminates the limitation of the free spectral range on the magnification factor by detecting the intersection response of internal envelopes, and realizes the secondary sensitization of the traditional Vernier effect. Combing the characteristics of HASCF, PDMS, and first-order harmonic Vernier effect, the sensor exhibits a high detection sensitivity of -19.22 nm/°C. The proposed sensor provides not only a design scheme for compact…

Twisted light carrying orbital angular momentum (OAM), which features a helical phase front, has shown its potential applications in diverse areas, especially in free-space optical (FSO) communications. Multiple orthogonal OAM beams can be utilized to enable high-capacity FSO communication systems. However, for practical OAM-based FSO communication links, atmospheric turbulence will cause serious power fluctuations and inter-model crosstalk between the multiplexed OAM channels, impairing link performance. In this paper, we propose and experimentally demonstrate a novel OAM mode-group multiplexing (OAM-MGM) scheme with transmitter mode diversity to increase system reliability under turbulence. Without adding extra system complexity, an FSO system transmitting two OAM groups with a total of 144 Gbit/s discrete multi-tone (DMT) signal is demonstrated under turbulence strength D/r0 of 1, 2, and 4. In our experiments, the proposed OAM-MGM scheme helps to achieve bit-error-rate (BER) mostly less than 3.8 × 10−3 under turbulence strength D/r0 of 1 and 2 with a total transmitted power of 10…

We investigate the coexistence of clock synchronization protocols with quantum signals in a common single-mode optical fiber. By measuring optical noise between 1500 nm to 1620 nm we demonstrate a potential for up to 100 quantum, 100 GHz wide channels coexisting with the classical synchronization signals. Both "White Rabbit" and pulsed laser-based synchronization protocols were characterized and compared. We establish a theoretical limit of the fiber link length for coexisting quantum and classical channels. The maximal fiber length is below approximately 100 km for off-the-shelf optical transceivers and can be significantly improved by taking advantage of quantum receivers.

Optical systems have been crucial for versatile applications such as consumer electronics, remote sensing and biomedical imaging. Designing optical systems has been a highly professional work due to complicated aberration theories and intangible rules-of-thumb, hence neural networks are only coming into this realm until recent years. In this work, we propose and implement a generic, differentiable freeform raytracing module, suitable for off-axis, multiple-surface freeform/aspheric optical systems, paving the way toward a deep learning-based optical design method. The network is trained with minimal prior knowledge, and it can infer numerous optical systems after a one-time training. The presented work unlocks great potential for deep learning in various freeform/aspheric optical systems, and the trained network could serve as an effective, unified platform for generating, recording, and replicating good initial optical designs.

Thin-film lithium niobate (TFLN) is a promising electro-optic (EO) photonics platform with high modulation bandwidth, low drive voltage, and low optical loss. However, EO modulation in TFLN is known to relax on long timescales. Instead, thermo-optic heaters are often used for stable biasing, but heaters incur challenges with cross-talk, high power, and low bandwidth. Here, we characterize the low-frequency (1 mHz to 1 MHz) EO response of TFLN modulators, investigate the root cause of EO relaxation and demonstrate methods to improve bias stability. We show that relaxation-related effects can enhance EO modulation across a frequency band spanning 1kHz to 20kHz in our devices – a counter-intuitive result that can confound measurement of half-wave voltage ( V π ) in TFLN modulators. We also show that EO relaxation can be slowed by more than 10 4 -fold through control of the LN-metal interface and annealing, offering progress toward lifetime-stable EO biasing. Such robust EO biasing would enable applications for TFLN devices where cross-talk, power, and bias bandwidth are critical, such…

In the field of continuous-variable quantum information processing, non-Gaussian states with negative values of the Wigner function are crucial for the development of a fault-tolerant universal quantum computer. While several non-Gaussian states have been generated experimentally, none have been created using ultrashort optical wave packets, which are necessary for high-speed quantum computation, in the telecommunication wavelength band where mature optical communication technology is available. In this paper, we present the generation of non-Gaussian states on wave packets with a short 8-ps duration in the 1545.32 nm telecommunication wavelength band using photon subtraction up to three photons. We used a low-loss, quasi-single spatial mode waveguide optical parametric amplifier, a superconducting transition edge sensor, and a phase-locked pulsed homodyne measurement system to observe negative values of the Wigner function without loss correction up to three-photon subtraction. These results can be extended to the generation of more complicated non-Gaussian states and are a key…

In this paper, an end-to-end methane gas detection algorithm based on transformer and multi-layer perceptron (MLP) for tunable diode laser absorption spectroscopy (TDLAS) is presented. It consists of a Transformer-based U-shaped Neural Network (TUNN) filtering algorithm and a concentration prediction network (CPN) based on MLP. This algorithm employs an end-to-end architectural design to extract information from noisy transmission spectra of methane and derive the CH 4 concentrations from denoised spectra, without intermediate steps. The results demonstrate the superiority of the proposed TUNN filtering algorithm over other typically employed digital filters. For concentration prediction, the determination coefficient (R 2 ) reached 99.7%. Even at low concentrations, R 2 remained notably high, reaching up to 89%. The proposed algorithm results in a more efficient, convenient, and accurate spectral data processing for TDLAS-based gas sensors.

In addition to the atmospheric measurement, detection of dissolved carbon oxides and hydrocarbons in a water region is also an important aspect of greenhouse gas monitoring, such as CH 4 and CO 2 . The first step of measuring dissolved gases is the separation process of water and gases. However, slow degassing efficiency is a big challenge which requires the gas detection technology itself with low gas consumption. Photoacoustic spectroscopy (PAS) is a good choice with advantages of high sensitivity, low gas consumption, and zero background, which has been rapidly developed in recent years and is expected to be applied in the field of dissolved gas detection. In this study, a miniaturized differential photoacoustic cell with a volume of 7.9 mL is designed for CH 4 and CO 2 detection, and a dual differential method with four microphones is proposed to enhance the photoacoustic signal. What we believe to be a new method increases photoacoustic signal by 4 times and improves the signal to noise ratio (SNR) over 10 times compared with the conventional single-microphone mode. Two…

We have investigated the effect of enhanced optical force via the acoustic graphene plasmon (AGP) cavities with the ultra-small mode volumes. The AGP mode can generate stronger field confinement and higher momentum, which could provide giant optical force, and has no polarization preference for the optical source. We have demonstrated that the trapping potential and force applied on polystyrene nanoparticle in the AGP cavities are as high as -13.6 × 10 2 k B T/mW and 2.5 nN/mW, respectively. The effect of radius of rounded corners and gap distance of AGP cavities on the optical force has been studied. Compared with an ideal nanocube, nanocube with rounded corners is more in line with the actual situation of the device. These results show that the larger radius of nanocube rounded corners, the smaller trapping potential and force provided by AGP cavities. Our results pave a new idea for the investigation of optical field and optical force via acoustic plasmon mode.

A kind of temperature and magnetic field sensor using Fabry-Perot interferometers (FPIs) and Vernier effect to enhance sensitivity is proposed. The sensor structure involves filling the FP air cavities with polydimethylsiloxane (PDMS) and magnetic fluid (MF) to create the PDMS and MF cavities for temperature and magnetic field detection, respectively. The two cavities are reflective structures, which are interconnected in series through a fiber-optic circulator. Experimental data demonstrates that the Vernier effect effectively enhances the sensor sensitivity. The average temperature sensitivity of the sensor is 26765 pm/°C within the range of 35∼39.5°C. The magnetic field intensity sensitivity is obtained to be -2245 pm/mT within the range of 3∼11 mT. The sensitivities of the temperature and magnetic field using the Vernier effect are about five times larger than those of the corresponding single FP cavity counterparts.

Multi-plane reconstruction is essential for realizing a holographic three-dimensional (3D) display. One fundamental issue in conventional multi-plane Gerchberg-Saxton (GS) algorithm is the inter-plane crosstalk, mainly caused by the neglect of other planes' interference in the process of amplitude replacement at each object plane. In this paper, we proposed the time-multiplexing stochastic gradient descent (TM-SGD) optimization algorithm to reduce the multi-plane reconstruction crosstalk. First, the global optimization feature of stochastic gradient descent (SGD) was utilized to reduce the inter-plane crosstalk. However, the crosstalk optimization effect would degrade as the number of object planes increases, due to the imbalance between input and output information. Thus, we further introduced the time-multiplexing strategy into both the iteration and reconstruction process of multi-plane SGD to increase input information. In TM-SGD, multiple sub-holograms are obtained through multi-loop iteration and then sequentially refreshed on spatial light modulator (SLM). The optimization…

By depositing the trapezoidal dielectric stripe on top of the 3D Dirac semimetal (DSM) hybrid plasmonic waveguide, the thermal tunable propagation properties have been systematically investigated in the terahertz regime, taking into account the influences of the structure of the dielectric stripe, temperature and frequency. The results manifest that as the upper side width of the trapezoidal stripe increases, the propagation length and figure of merit (FOM) both decrease. The propagation properties of hybrid modes are closely associated with temperature, in that when the temperature changes in the scope of 3-600 K, the modulation depth of propagation length is more than 96%. Additionally, at the balance point of plasmonic and dielectric modes, the propagation length and FOM manifest strong peaks and indicate an obvious blue shift with the increase of temperature. Furthermore, the propagation properties can be improved significantly with a Si-SiO 2 hybrid dielectric stripe structure, e.g., on the condition that the Si layer width is 5 µm, the maximum value of the propagation length…

Augmented reality near-eye display (AR-NED) technology has attracted enormous interests for its widespread potential applications. In this paper, two-dimensional (2D) holographic waveguide integrated simulation design and analysis, holographic optical elements (HOEs) exposure fabrication, prototype performance evaluation and imaging analysis are completed. In the system design, a 2D holographic waveguide AR-NED integrated with a miniature projection optical system is presented to achieve a larger 2D eye box expansion (EBE). A design method for controlling the luminance uniformity of 2D-EPE holographic waveguide by dividing the two thicknesses of HOEs is proposed, which is easy to fabricate. The optical principle and design method of the HOE-based 2D-EBE holographic waveguide are described in detail. In the system fabrication, laser exposure fabrication method of eliminating stray light for HOEs is proposed, and a prototype system is fabricated and demonstrated. The properties of the fabricated HOEs and the prototype are analyzed in detail. The experimental results verified that the…

A sulfur dioxide (SO 2 ) gas sensor based on the photoacoustic spectroscopy technology in a sulfur hexafluoride (SF 6 ) gas matrix was demonstrated for SF 6 decomposition components monitoring in the power system. A passive Q -switching laser diode (LD) pumped all-solid-state 266 nm deep-ultraviolet laser was exploited as the laser excitation source. The photoacoustic signal amplitude is linear related to the incident optical power, whereas, a random laser power jitter is inevitable since the immature laser manufacturing technology in UV spectral region. A compact laser power stabilization system was developed for better sensor performance by adopting a photodetector, a custom-made internal closed-loop feedback controller and a Bragg acousto-optic modulator (AOM). The out-power stability of 0.04% was achieved even though the original power stability was 0.41% for ∼ 2 hours. A differential two-resonator photoacoustic cell (PAC) was designed for weak photoacoustic signal detection. The special physical constants of SF 6 buffer gas induced a high- Q factor of 85. A detection limit of…

The decoherence-free subspace (DFS) serves as a protective shield against certain types of environmental noise, allowing the system to remain coherent for extended periods of time. In this paper, we propose two protocols, i.e., one converts two-logic-qubit Knill-Laflamme-Milburn (KLM) state to two-logic-qubit Bell states, and the other converts three-logic-qubit KLM state to three-logic-qubit Greenberger-Horne-Zeilinger states, through cavity-assisted interaction in DFS. Especially, our innovative protocols achieve their objectives in a heralded way, thus enhancing experimental accessibility. Moreover, single photon detectors are incorporated into the setup, which can predict potential failures and ensure seamless interaction between the nitrogen-vacancy center and photons. Rigorous analyses and evaluations of two schemes demonstrate their abilities to achieve near-unit fidelities in principle and exceptional efficiencies. Further, our protocols offer progressive solutions to the challenges posed by decoherence, providing a pathway towards practical quantum technologies.

We report on the complete temporal characterization of ultrashort pulses, generated by resonant dispersive wave emission in gas-filled hollow-capillary fibers, with energy in the microjoule range and continuously tunable from the deep-ultraviolet to the ultraviolet. Temporal characterization of such ultrabroad pulses, particularly challenging in this spectral region, was performed using an all-in-vacuum setup for self-diffraction frequency resolved optical gating (SD-FROG). Sub-3-fs pulses were measured, tunable from 250 nm to 350 nm, with a minimum pulse duration of 2.4 ± 0.1 fs.

In this paper, we investigate the optical nondegenerate solitons in a birefringent fiber with a 35 degree elliptical angle. We derive the nondegenerate bright one- and two-soliton solutions by solving the coupled Schrödinger equation. The formation of nondegenerate solitons is related to the wave numbers of the solitons, and we further demonstrate that it is caused by the incoherent addition of different components. We note that the interaction between two degenerate solitons or a nondegenerate soliton and a degenerate soliton is usually inelastic. This is led to the incoherent interaction between solitons of different components and the coherent interaction between solitons of the same component. Through the asymptotic analysis, we find that the two degenerate solitons are elastic interactions under certain conditions, and analyzed the influence of the Kerr nonlinear intensity coefficient γ and the second-order group velocity dispersion β 2 in this system on solitons: the velocity and amplitude of the solitons are proportional to | β 2 |, while the amplitude of the solitons is…

The significance of micro-nano composite gratings (MNCGs) resides in their applications, including optical devices, sensors, and diffractive elements, which drive research interest in their diffraction characteristics. This study investigates both the diffraction characteristics of MNCGs and the factors that influence them by employing both Finite-Difference Time-Domain (FDTD) methods and experimental validation. The initial focus lies in deciphering the differences in diffraction characteristics between micro-gratings (MGs) and MNCGs by analyzing the coupling effects, diffraction order, color distribution, and intensity variation. Additionally, this research emphatically investigates five aspects to discover the influencing factors of MNCG's diffraction characteristics, such as the height, groove angle of MGs and the period, blaze angle, and height of nano-gratings (NGs). Results show that the structural coloration and saturation of MNCG surpass that of MG. NG plays the actual spectral role, and a reduction in the period of NG leads to enhanced splitting light capability of the…

As a photonic-based microwave signal generation method, the optoelectronic oscillator (OEO) has the potential of meeting the increasing demand of practical applications for high frequency, broadband tunability and ultra-low phase noise. However, conventional OEO systems implemented with discrete optoelectronic devices have a bulky size and low reliability, which extremely limits their practical applications. In this paper, a hybrid-integrated wideband tunable OEO with low phase noise is proposed and experimentally demonstrated. The proposed hybrid integrated OEO achieves a high integration level by first integrating a laser chip with a silicon photonic chip, and then connecting the silicon photonic chip with electronic chips through wire-bonding to microstrip lines. A compact fiber ring and an yttrium iron garnet filter are also adopted for high-Q factor and frequency tuning, respectively. The integrated OEO exhibits a low phase noise of -128.04 dBc/Hz @ 10 kHz for an oscillation frequency of 10 GHz. A wideband tuning range from 3 GHz to 18 GHz is also obtained, covering the entire…

Conventional (CP) and Fourier (FP) ptychography have emerged as versatile quantitative phase imaging techniques. While the main application cases for each technique are different, namely lens-less short wavelength imaging for CP and lens-based visible light imaging for FP, both methods share a common algorithmic ground. CP and FP have in part independently evolved to include experimentally robust forward models and inversion techniques. This separation has resulted in a plethora of algorithmic extensions, some of which have not crossed the boundary from one modality to the other. Here, we present an open source, cross-platform software, called PtyLab, enabling both CP and FP data analysis in a unified framework. With this framework, we aim to facilitate and accelerate cross-pollination between the two techniques. Moreover, the availability in Matlab, Python, and Julia will set a low barrier to enter each field.

An empirical TMI threshold formula is derived based on a recently developed model and used to analyze the power-scaling performance of ytterbium-doped silica glass and YAG (Y 3 Al 5 O 12 ) and lutetia (Lu 2 O 3 ) single-crystalline fiber amplifiers. Overall, the single-crystalline fiber lasers are found to scale potentially to higher average powers due to their higher thermal conductivities compared to silica glass. This work serves as a useful extension to earlier works and shines significant new light on optimal fiber and amplifier designs for maximum average output power with TMI considered.

With the advances in the field of ultrafast photonics occurring so fast, the demand for optical modulation devices with high performance and soliton lasers which can realize the evolution of multiple soliton pulses is gradually increasing. Nevertheless, saturable absorbers (SAs) with appropriate parameters and pulsed fiber lasers which can output abundant mode-locking states still need to be further explored. Due to the special band gap energy values of few-layer indium selenide (InSe) nanosheets, we have prepared a SA based on InSe on a microfiber by optical deposition. In addition, we demonstrate that our prepared SA possesses a modulation depth and saturable absorption intensity about 6.87% and 15.83 MW/cm 2 , respectively. Then, multiple soliton states are obtained by dispersion management techniques, including regular solitons, and second-order harmonic mode-locking solitons. Meanwhile, we have obtained multi-pulse bound state solitons. We also provide theoretical basis for the existence of these solitons. The results of the experiment show that the InSe has the potential to be…

Structured illumination microscopy (SIM) is a popular super-resolution imaging technique that can achieve resolution improvements of 2× and greater depending on the illumination patterns used. Traditionally, images are reconstructed using the linear SIM reconstruction algorithm. However, this algorithm has hand-tuned parameters which can often lead to artifacts, and it cannot be used with more complex illumination patterns. Recently, deep neural networks have been used for SIM reconstruction, yet they require training sets that are difficult to capture experimentally. We demonstrate that we can combine a deep neural network with the forward model of the structured illumination process to reconstruct sub-diffraction images without training data. The resulting physics-informed neural network (PINN) can be optimized on a single set of diffraction-limited sub-images and thus does not require any training set. We show, with simulated and experimental data, that this PINN can be applied to a wide variety of SIM illumination methods by simply changing the known illumination patterns used…

A high-sensitive photoacoustic spectroscopy (PAS) sensor, which is based on a multi-pass-retro-reflection-enhanced differential Helmholtz photoacoustic cell (DHPAC) and a high power diode laser amplified by erbium-doped fiber amplifier (EDFA), is presented in this work for the first time. In order to improve the interaction length between the light and target gas, the incident light was reflected four times through a multi-pass-retro-reflection-cell constructed by two right-angle prisms. A 1.53 µm distributed feedback (DFB) diode laser was selected to excite photoacoustic signal. Moreover, its power was amplified by an EDFA to 1000 mW to improve the amplitude of photoacoustic signal. Acetylene (C 2 H 2 ) was chosen as the target analysis to verify the reported sensor performance. Compared to double channel without multiple reflections, the 2 f signal of double channel with four reflections was improved by 3.71 times. In addition, when the output optical power of EDFA was 1000 mW, the 2 f signal has a 70.57-fold improvement compared with the multi-pass-retro-reflection-cell without…

Orbital angular momentum (OAM) has recently obtained tremendous research interest in free-space optical communications (FSO). During signal transmission within the free-space link, atmospheric turbulence (AT) poses a significant challenge as it diminishes the signal strength and introduce intermodal crosstalk, significantly reducing OAM mode detection accuracy. This issue directly impacts the performance of OAM-based communication systems and leads to a reduction in received information. To address this critical bottleneck of low mode recognition accuracy in OAM-based FSO-communications, a deep learning method based on vision transformers (ViT) is proposed for what we believe is for the first time. Designed carefully by numerous experts, the advanced self-attention mechanism of ViT captures more global information from the input image. To train the model, pretraining on a large dataset, named IMAGENET is conducted. Subsequently, we performed fine-tuning on our specific dataset, consisting of OAM beams that have undergone varying AT strengths. The computer simulation shows that based…

Terahertz logic gates play a crucial role in optical signal processing and THz digitization. In this paper, we propose a design strategy for graphene-based metamaterial THz all-optical logic gate devices based on the induced transparency effect of surface isolated. Theoretically, we realize Boolean operations by coupling of a hexagonal graphene resonant cavity with dual embedded rotatable ellipses. Based on the coupled mode theory, the elliptical rotation angle of the resonator is an important factor affecting the PIT phenomenon. We control the logic input by adjusting the rotation angles of the two embedded ellipses. The analysis results show that: under the incidence of y-polarized light, the ellipse deflection angle of 0° represents the input signal '0', and the ellipse deflection angle of 30° represents the input signal '1'. Through numerical simulation, the structure realizes two logical operations of NAND and AND. Under the incidence of x-polarized light, the ellipse deflection angle of 0° represents the input signal '0', and the ellipse deflection angle of 90° represents the…

Passive daytime radiative cooling (PDRC) as a zero-energy consumption cooling method has broad application potential. Common commercial crystalline silicon (c-Si) solar cell arrays suffer working efficiency loss due to the incident light loss and overheating. In this work, a radiative cooler with PDMS (polydimethylsiloxane) film and embedded SiO 2 microparticles was proposed to use in silicon solar cells. Both anti-reflection and radiative cooling performance can be improved through numerical parametric study. For the best performing of PDMS/SiO 2 radiative cooler, the thickness of PDMS layer, volume fraction and radius of the embedded SiO 2 particles have been determined as 55 µm, 8% and 500 nm, respectively. 94% of emissivity in first atmospheric window band (8–13 µm) for radiative cooling and 93.4% of solar transmittance at the crystalline silicon absorption band (0.3–1.1 µm) were achieved. We estimated that the PDMS/SiO 2 radiative cooler can lower the temperature of a bare c-Si solar cell by 9.5°C, which can avoid 4.28% of efficiency loss. More incident light can enter and be…

In this work, we propose two different graphene-covered nanostructured metamaterial absorbers inspired by Penrose tiling. These absorbers allow spectrally tunable absorption within the terahertz spectrum corresponding to 0.2-20 THz. We have conducted finite-difference time-domain analyses to determine the tunability of these metamaterial absorbers. The proposed structures, Penrose models 1 and 2, perform differently from each other due to their design characteristics. Penrose model 2 reaches a perfect absorption at 8.58 THz. In addition, the relative absorption bandwidth calculated at full-wave at half-maximum in Penrose model 2 varies between 5.2% and 9.4%, which characterizes the metamaterial absorber as a wideband absorber. Also, we can observe that as we increase the Fermi level of graphene from 0.1 to 1 eV, the absorption bandwidth and relative absorption bandwidth both increase. Our findings show the high tunability of both models through varying graphene's Fermi level, the graphene's thickness, the substrate's refractive index, and the proposed structures' polarization. We…

We report, what we believe to be, a novel miniaturized 3D-printed Y-type resonant photoacoustic cell (YRPAC) consisting of a frustum of cone-type buffer chamber and a cylindrical resonant chamber. The volume of the designed YRPAC is about 7.0 cm 3 , which is only about a half of the T-resonant photoacoustic cell (TRPAC). The finite element simulation of the sound field distribution of the TRPAC and YRPAC based on COMSOL shows that the photoacoustic signal is enhanced with the shape of the buffer chamber changing from the traditional cylinder to a frustum of cone. The photoacoustic spectroscopy (PAS) system, utilizing the YRPAC and TRPAC as the photoacoustic reaction units, a 1653.7 nm distributed feedback (DFB) laser as the excitation light source, a cantilever beam acoustic sensor as the acoustic sensing unit, and a high-speed spectrometer as the demodulation unit, has been successfully developed for high-sensitivity trace CH 4 sensing. When the CH 4 concentration is 1000 ppm, the 2 f signal of YRPAC in the first-order resonance mode is 2.3 nm, which is 1.7 times higher than the 2…

Light detection and ranging (lidar) is widely accepted as an indispensable sensor for autonomous vehicles. There are two fundamental challenges in a lidar system: optical beam steering technique and ranging method. Optical phased array (OPA) is considered as one of the most promising beam steering schemes due to its solid state, compact size, and high reliability. As for ranging method, time-of-flight and frequency-modulate continuous-wave (FMCW) are commonly utilized in numerous research. However, they are impractical to commercial OPA lidar due to either requiring excessive optical power or the poor stability, high complexity, and high insertion loss of the FMCW source. As a result, the development of OPA lidars is significantly hindered by the lack of a feasible ranging method. In this paper, we present a phase-modulated continuous-wave (PhMCW) ranging method with excellent ranging accuracy and precision. Ranging error as low as 0.1 cm and precision on the order of 3.5 cm are achieved. In addition, theoretical and experimental study on simultaneous velocity measurement is carried…

Since high-order harmonic generation (HHG) from atoms depends sensitively on the polarization of the driving laser field, the polarization gating (PG) technique was developed and applied successfully to generate isolated attosecond pulses from atomic gases. The situation is, however, different in solid-state systems as it has been demonstrated that due to collisions with neighboring atomic cores of the crystal lattice strong HHG can be generated even by elliptically- and circularly-polarized laser fields. Here we apply PG to solid-state systems and find that the conventional PG technique is inefficient for the generation of isolated ultrashort harmonic pulse bursts. In contrast, we demonstrate that a polarization-skewed laser pulse is able to confine the harmonic emission to a time window of less than one-tenth of the laser cycle. This method provides a novel way to control HHG and to generate isolated attosecond pulses in solids.

Imaging with single-pixel detectors becomes attractive in many applications where pixelated detectors are not available or cannot work. Based on a correlation between the probing patterns and the realizations, optical imaging with single-pixel detector offers an indirect way to recover a sample. It is well recognized that single-pixel optical imaging through dynamic and complex scattering media is challenging, and dynamic scaling factors lead to serious mismatches between the probing patterns and the realizations. In this paper, we report self-corrected imaging to realize high-resolution object reconstruction through dynamic and complex scattering media using a parallel detection with dual single-pixel detectors. The proposed method can supervise and self-correct dynamic scaling factors, and can implement high-resolution object reconstruction through dynamic and complex scattering media where conventional methods could not work. Spatial resolution of 44.19 µm is achieved which approaches diffraction limit (40.0 µm) in the designed optical setup. The achievable spatial resolution is…

Temporal phase unwrapping (TPU) is significant for recovering an unambiguous phase of discontinuous surfaces or spatially isolated objects in fringe projection profilometry. Generally, temporal phase unwrapping algorithms can be classified into three groups: the multi-frequency (hierarchical) approach, the multi-wavelength (heterodyne) approach, and the number-theoretic approach. For all of them, extra fringe patterns of different spatial frequencies are required for retrieving the absolute phase. Due to the influence of image noise, people have to use many auxiliary patterns for high-accuracy phase unwrapping. Consequently, image noise limits the efficiency and the measurement speed greatly. Further, these three groups of TPU algorithms have their own theories and are usually applied in different ways. In this work, for the first time to our knowledge, we show that a generalized framework using deep learning can be developed to perform the TPU task for different groups of TPU algorithms. Experimental results show that benefiting from the assistance of deep learning the proposed…

We demonstrate a novel mesh of Mach-Zehnder interferometers (MZIs) for programmable optical processors. We thoroughly analyze the benefits and drawbacks of previously known meshes and compare our newly proposed mesh with these prior architectures, highlighting its unique features and advantages. The proposed mesh, referred to as Bokun mesh, is an architecture that merges the attributes of the prior topologies Diamond and Clements. Similar to Diamond, Bokun provides diagonal paths passing through every individual MZI enabling direct phase monitoring. However, unlike Diamond and similar to Clements, Bokun maintains a minimum optical depth leading to better scalability. Providing the monitoring option, Bokun's programming is faster improving the total energy efficiency of the processor. The performance of Bokun mesh enabled by an optimal optical depth is also more resilient to the loss and fabrication imperfections compared to architectures with longer depth such as Reck and Diamond. Employing an efficient programming scheme, the proposed architecture improves energy efficiency by 83%…

Optical phase-change materials exhibit tunable permittivity and switching properties during phase transition, which offers the possibility of dynamic control of optical devices. Here, a wavelength-tunable infrared chiral metasurface integrated with phase-change material GST-225 is demonstrated with the designed unit cell of parallelogram-shaped resonator. By varying the baking time at a temperature above the phase transition temperature of GST-225, the resonance wavelength of the chiral metasurface is tuned in the wavelength range of 2.33 µm to 2.58 µm, while the circular dichroism in absorption is maintained around 0.44. The chiroptical response of the designed metasurface is revealed by analyzing the electromagnetic field and displacement current distributions under left- and right-handed circularly polarized (LCP and RCP) light illumination. Moreover, the photothermal effect is simulated to investigate the large temperature difference in the chiral metasurface under LCP and RCP illumination, which allows for the possibility of circular polarization-controlled phase transition.…

Highly-time-resolved and precise tracking of position, velocity, and acceleration is urgently required when highly dynamic legged robots are walking, trotting, and jumping. Frequency-modulated continuous-wave (FMCW) laser ranging is able to provide precise measurement in short distance. However, FMCW light detection and ranging (LiDAR) suffers from a low acquisition rate and poor linearity of laser frequency modulation in wide bandwidth. A sub-millisecond-scale acquisition rate and nonlinearity correction in the wide frequency modulation bandwidth have not been reported in previous studies. This study presents the synchronous nonlinearity correction for a highly-time-resolved FMCW LiDAR. The acquisition rate of 20 kHz is obtained by synchronizing the measurement signal and the modulation signal of laser injection current with a symmetrical triangular waveform. The linearization of laser frequency modulation is conducted by resampling of 1000 intervals interpolated in every up-sweep and down-sweep of 25 µs, while measurement signal is stretched or compressed in every period of 50 µs.…

The scalability of quantum networking will benefit from quantum and classical communications coexisting in shared fibers, the main challenge being spontaneous Raman scattering noise. We investigate the coexistence of multi-channel O-band quantum and C-band classical communications. We characterize multiple narrowband entangled photon pair channels across 1282 nm-1318 nm co-propagating over 48 km of installed standard fiber with record C-band power (>18 dBm) and demonstrate that some quantum-classical wavelength combinations significantly outperform others. We analyze the Raman noise spectrum, optimal wavelength engineering, multi-photon pair emission in entangled photon-classical coexistence, and evaluate the implications for future quantum applications.

We demonstrate the measurement of super low-frequency electric field using Rydberg atoms in an atomic vapor cell with inside parallel electrodes, thus overcoming the low-frequency electric-field-screening effect at frequencies below a few kHz. Rydberg electromagnetically induced transparency (EIT) spectra involving 52 D 5/2 state is employed to measure the signal electric field. An auxiliary DC field is applied to improve the sensitivity. A DC Stark map is demonstrated, where the utilized 52 D 5/2 exhibits m j = 1/2, 3/2, 5/2 Stark shifts and splittings. The m j = 1/2 state is employed to detect the signal field because of its larger polarizability than that of m j = 3/2, 5/2. Also, we show that the strength of the spectrum is dependent on the angle between the laser polarizations and the electric field. With optimization of the applied DC field to shift the m j = 1/2 Rydberg energy level to a high sensitivity region and the laser polarizations to obtain the maximum m j = 1/2 signal, we achieve the detection of the signal electric field with a frequency of 100 Hz down to 214.8 µ…

We demonstrate the first single-mode optical fiber couplers made with ZBLAN optical fiber. Couplers are fabricated using a controlled tapering procedure enabling high reproducibility while limiting glass crystallization. A coupling ratio of up to 41%/59% in cross/through ports with an excess loss of 2.5 dB is obtained at a wavelength of 2.73 μm. In addition, the stability of a coupler with traces of surface crystallization is tested at ambient atmosphere over a period of more than 90 days.

We propose a scheme to generate nonreciprocal photon blockade in a stationary whispering gallery microresonator system based on two physical mechanisms. One of the two mechanisms is inspired by recent work [Phys. Rev. Lett.128, 083604 (2022)10.1103/PhysRevLett.128.083604], where the quantum squeezing caused by parametric interaction not only shifts the optical frequency of propagating mode but also enhances its optomechanical coupling, resulting in a nonreciprocal conventional photon blockade phenomenon. On the other hand, we also give another mechanism to generate stronger nonreciprocity of photon correlation according to the destructive quantum interference. Comparing these two strategies, the required nonlinear strength of parametric interaction in the second one is smaller, and the broadband squeezed vacuum field used to eliminate thermalization noise is no longer needed. All analyses and optimal parameter relations are further verified by numerically simulating the quantum master equation. Our proposed scheme opens a new avenue for achieving the nonreciprocal single photon…

The correlation function and the detection probability of orbital angular momentum (OAM) of a perfect optical vortex beam (POVB) were obtained under atmospheric turbulence conditions and then used to estimate the POVB propagation model through atmospheric turbulence. The POVB propagation in a turbulence-free channel can be divided into anti-diffraction and self-focusing stages. The beam profile size can be well preserved in the anti-diffraction stage as the transmission distance increases. After shrinking and focusing the POVB in the self-focusing region, the beam profile size expands in the self-focusing stage. The influence of topological charge on the beam intensity and profile size differs depending on the propagation stage. The POVB degenerates into a Bessel-Gaussian beam (BGB)-like when the ratio of the ring radius to the Gaussian beam waist approaches 1. The unique self-focusing effect of the POVB enables higher received probability compared to the BGB when propagating over long distances in atmospheric turbulence. However, the property of the POVB that its initial beam…

The performance of modular, networked quantum technologies will be strongly dependent upon the quality of their quantum light-matter interconnects. Solid-state colour centres, and in particular T centres in silicon, offer competitive technological and commercial advantages as the basis for quantum networking technologies and distributed quantum computing. These newly rediscovered silicon defects offer direct telecommunications-band photonic emission, long-lived electron and nuclear spin qubits, and proven native integration into industry-standard, CMOS-compatible, silicon-on-insulator (SOI) photonic chips at scale. Here we demonstrate further levels of integration by characterizing T centre spin ensembles in single-mode waveguides in SOI. In addition to measuring long spin T 1 times, we report on the integrated centres’ optical properties. We find that the narrow homogeneous linewidth of these waveguide-integrated emitters is already sufficiently low to predict the future success of remote spin-entangling protocols with only modest cavity Purcell enhancements. We show that further…

As an alternative solution to the lack of cost-effective multipixel terahertz cameras, terahertz single-pixel imaging that is free from pixel-by-pixel mechanical scanning has been attracting increasing attention. Such a technique relies on illuminating the object with a series of spatial light patterns and recording with a single-pixel detector for each one of them. This leads to a trade-off between the acquisition time and the image quality, hindering practical applications. Here, we tackle this challenge and demonstrate high-efficiency terahertz single-pixel imaging based on physically enhanced deep learning networks for both pattern generation and image reconstruction. Simulation and experimental results show that this strategy is much more efficient than the classical terahertz single-pixel imaging methods based on Hadamard or Fourier patterns, and can reconstruct high-quality terahertz images with a significantly reduced number of measurements, corresponding to an ultra-low sampling ratio down to 1.56%. The efficiency, robustness and generalization of the developed approach are…

Silicon nitride (SiN) integrated optical waveguides have found a wide range of applications due to their low loss, broad wavelength transmission band and high nonlinearity. However, the large mode mismatch between the single-mode fiber and the SiN waveguide creates a challenge of fiber coupling to these waveguides. Here, we propose a coupling approach between fiber and SiN waveguides by utilizing the high-index doped silica glass (HDSG) waveguide as the intermediary to smooth out the mode transition. We achieved fiber-to-SiN waveguide coupling efficiency of lower than 0.8 dB/facet across the full C and L bands with high fabrication and alignment tolerances.

Recently, augmented reality (AR) displays have attracted considerable attention due to the highly immersive and realistic viewer experience they can provide. One key challenge of AR displays is the fundamental trade-off between the extent of the field-of-view (FOV) and the size of the eyebox, set by the conservation of etendue sets this trade-off. Exit-pupil expansion (EPE) is one possible solution to this problem. However, it comes at the cost of distributing light over a larger area, decreasing the overall system's brightness. In this work, we show that the geometry of the waveguide and the in-coupler sets a fundamental limit on how efficient the combiner can be for a given FOV. This limit can be used as a tool for waveguide designers to benchmark the in-coupling efficiency of their in-coupler gratings. We design a metasurface-based grating (metagrating) and a commonly used SRG as in-couplers using the derived limit to guide optimization. We then compare the diffractive efficiencies of the two types of in-couplers to the theoretical efficiency limit. For our chosen waveguide…

In this work, we investigate the bound states in the continuum (BICs) in a gold nanograting metal-insulator-metal metasurface structure at oblique angles of incidence. The nanograting metasurface consists of a gold nanograting patterned on a silicon dioxide dielectric film deposited on a thick gold film supported by a substrate. With rigorous full-wave finite difference time domain simulations, two bound states in the continuum are revealed upon transverse magnetic wave angular incidence. One BIC is formed by the interference between the surface plasmon polariton mode of the gold nanograting and the FP cavity mode. Another BIC mode is formed by the interference between the metal-dielectric hybrid structure guided mode resonance mode and the FP cavity mode. While true BIC modes cannot be observed, quasi-BIC modes are investigated at angles of incidence slightly off from the corresponding true BIC angles. It is shown that quasi-BIC modes can suppress radiation loss, resulting in narrow resonance spectral linewidths and high quality-factors. The quasi-BIC mode associated with the…

In recent years, the transmission capacity of chaotic secure communications has been greatly expanded by combining coherent detection and multi-dimensional multiplexing. However, demonstrations over 1000 km fiber are yet to be further explored. In this paper, we propose a coherent optical secure transmission system based on analog-digital hybrid chaos. By introducing an analog-digital converter (ADC) and a bit extraction into the feedback loop of entropy source, the broadband analog chaos is converted into a binary digital signal. This binary digital signal is then mapped to a 65536-level pulse amplitude modulation (PAM) signal and injected into the semiconductor laser (SL) to regenerate the analog chaos, forming a closed loop. The binary digital signal from the chaos source and the encrypted signal are transmitted via wavelength division multiplexing (WDM). By using conventional digital signal processing (DSP) algorithms and neural networks for post-compensation, long-haul high-quality chaotic synchronization and high-performance secure communication are achieved. In addition, the…

A high-performance towing cable hydrophone array based on an improved ultra-sensitive fiber-optic distributed acoustic sensing system (uDAS) with picostrain sensitivity is demonstrated and tested in sea trial, for the first time. A new composite transducer is designed and optimized to enhance the acoustic pressure sensitivity significantly. A sea trial is carried out to test the performances of such a hydrophone array, including flow noise, underwater acoustic signal capture capacity, beamforming processing and localization of artificial source targets. The array exhibits high sensitivity and low noise floor. An average sensitivity of -129.23 dB re rad/µPa at frequencies from 10 Hz to 1500 Hz has been achieved. The localization at distances of 5 km and 10 km is realized, respectively, validating the excellent remote detection and positioning capability of the hydrophone system. The proposed towing cable system, with high sensitivity, simple structure and remote target localization ability, may pave a way for development of the next generation of high-performance light-weighting…

In this study, an ultra-wide range plasmonic refractive index sensor based on dual core photonic crystal fiber is suggested and analyzed numerically. The proposed design achieves fabrication feasibility by employing external sensing mechanism in which silver is deposited onto the flat outer surface of the fiber as plasmonic material. A thin layer of titanium oxide (TiO2) is considered on top of the silver layer for preventing its oxidation problem. The sensor attains identification of a vast array of analytes consisting a wide range of refractive indices of 1.10 – 1.45. It achieves a maximum spectral sensitivity of 24300 nm/RIU along with its corresponding resolution of 4.12 × 10−6 RIU. The maximum figure of merit of the sensor is 120 RIU−1. The sensor also supports amplitude interrogation approach and exhibits a maximum amplitude sensitivity of 172 RIU−1. The impact of the design parameters such as radius of air holes, polishing distance, thickness of silver and titanium oxide layers are investigated thoroughly. An ultra-wide detection range with high sensitivity, fabrication…

Using a freeform optical surface can effectively reduce the imaging system weight and volume while maintaining good performance and advanced system specifications. But it is still very difficult for traditional freeform surface design when ultra-small system volume or ultra-few elements are required. Considering the images generated by the system can be recovered by digital image processing, in this paper, we proposed a design method of compact and simplified off-axis freeform imaging systems using optical-digital joint design process, which fully integrates the design of a geometric freeform system and the image recovery neural network. This design method works for off-axis nonsymmetric system structure and multiple freeform surfaces with complicated surface expression. The overall design framework, ray tracing, image simulation and recovery, and loss function establishment are demonstrated. We use two design examples to show the feasibility and effect of the framework. One is a freeform three-mirror system with a much smaller volume than a traditional freeform three-mirror…

The preceding works introduced the leapfrog complying divergence implicit finite-difference time-domain (CDI-FDTD) method, which exhibits high accuracy and unconditional stability. In this study, the method is reformulated to simulate general electrically anisotropic and dispersive media. The auxiliary differential equation (ADE) method is employed to solve the equivalent polarization currents, which are then integrated into the CDI-FDTD method. The iterative formulae are presented, and the calculation method is similar to that of the traditional CDI-FDTD method. Additionally, the Von Neumann method is utilized to analyze the unconditional stability of the proposed method. To evaluate the performance of the proposed method, three numerical cases are conducted. These include calculating the transmission and reflection coefficients of a monolayer graphene sheet and a monolayer magnetized plasma, as well as the scattering properties of a cubic block plasma. The numerical results obtained by the proposed method demonstrate its accuracy and efficiency in simulating general anisotropic…

FBG array sensors have been widely used in the multi-point monitoring of large structures due to their excellent optical multiplexing capability. This paper proposes a cost-effective demodulation system for FBG array sensors based on a Neural Network (NN). The stress variations applied to the FBG array sensor are encoded by the array waveguide grating (AWG) as transmitted intensities under different channels and fed to an end-to-end NN model, which receives them and simultaneously establishes a complex nonlinear relationship between the transmitted intensity and the actual wavelength to achieve absolute interrogation of the peak wavelength. In addition, a low-cost data augmentation strategy is introduced to break the data size bottleneck common in data-driven methods so that the NN can still achieve superior performance with small-scale data. In summary, the demodulation system provides an efficient and reliable solution for multi-point monitoring of large structures based on FBG array sensors.

AlGaN-based UV-A LEDs have wide applications in medical treatment and chemical sensing; however, their efficiencies are still far behind visible LEDs or even shorter wavelengths UV-C counterparts because of the large lattice mismatch between the low-Al-content active region and the AlN substrate. In this report, we investigated the composition and thickness of the quantum barrier in the active region in terms of LED performance. Due to the improved strain management and better carrier confinement, efficient UV-A LEDs (320 nm - 330 nm) with EQEs up to 6.8% were demonstrated, among the highest efficiencies at this wavelength range.

We have designed and fabricated a hybrid integrated laser source with full C-band wavelength tunability and high-power output. The external cavity laser is composed of a gain chip and a dual micro-ring narrowband filter integrated on the silicon nitride photonic chip to achieve a wavelength tuning range of 55 nm and a SMSR higher than 50 dB. Through the integration of the semiconductor optical amplifier in the miniaturized package, the laser exhibits an output power of 220 mW and linewidth narrower than 8 kHz over the full C-band. Such a high-power, narrow-linewidth laser diode with a compact and low-cost design could be applied whenever coherence and interferometric resolutions are needed, such as silicon optical coherent transceiver module for space laser communication, light detection and ranging (LiDAR).

Hetero-epitaxial growth of GaN often leads to high density of threading dislocations, which poses a significant challenge to the promotion of the performance of GaN-based devices. In this study, we address this issue by utilizing an Al-ion implantation pretreatment on sapphire substrates, which induces high-quality regularly arranged nucleation and promotes the crystal quality of GaN. Specifically, we demonstrate that an Al-ion dose of 10 13 cm -2 leads to a reduction of full width at half maximum values of (002)/(102) plane X-ray rocking curves from 204.7/340.9 arcsec to 187.0/259.5 arcsec. Furthermore, a systematic investigation of GaN film grown on the sapphire substrate with various Al-ion doses is also performed, and the nucleation layer growth evolution on different sapphire substrates is analyzed. As confirmed by the atomic force microscope results of the nucleation layer, the ion implantation induced high-quality nucleation is demonstrated, which results in the improved crystal quality of the as-grown GaN films. Transmission electron microscope measurement also proves the…

This paper proposes a high-security chaotic encrypted power sparse coding division (CE-PSCD) scheme for 7-core fiber based on non-orthogonal multiple access (NOMA) technology. The method utilizes power multiplexing to realize parallel transmission of two signals. Joint encryption of the four-dimensional region is realized using constellation mapping encryption, carrier frequency encryption, symbol scrambling, and sparse code scrambling. What we believe to be a new dimension for encryption of autonomously designed sparse codes is proposed. Meanwhile, we hide the chaotic key in training sequence (TS) to realize the co-transmission of the key and the message. A 70 Gb/s CE-PSCD signal transmission over 2 km of 7-core fiber is demonstrated experimentally. At the limit of forward error correction (FEC) ∼3.8 × 10 −3 , the difference in the encrypted sensitivity among different users at the equal power level is 0.36 dB, which means that the fairness of users will not be destroyed. The key space can reach 10 134 , with a bit error rate (BER) of about 0.5 for brute-force cracking at illegal…

Underwater scattering caused by suspended particles in the water severely degrades signal detection performance and poses significant challenges to the problem of object detection. This paper introduces an integrated dual-function deep learning-based underwater object detection and classification and temporal signal detection algorithm using three-dimensional (3D) integral imaging (InIm) under degraded conditions. The proposed system is an efficient object classification and temporal signal detection system for degraded environments such as turbidity and partial occlusion and also provides the object range in the scene. A camera array captures the underwater objects in the scene and the temporally encoded binary signals transmitted for the purpose of communication. The network is trained using a clear underwater scene without occlusion, whereas test data is collected in turbid water with partial occlusion. Reconstructed 3D data is the input to a You Look Only Once (YOLOv4) neural network for object detection and a convolutional neural network-based bidirectional long short-term…

Direct epitaxial growth of group III-V light sources with excellently thermal performance on silicon photonics chips promises low-cost, low-power-consumption, high-performance photonic integrated circuits. Here, we report on the achievement of ultra-high thermal stability 1.3 µm InAs/GaAs quantum dot (QD) lasers directly grown on an on-axis Si (001) with a record-high continuous-wave (CW) operating temperature of 150 °C. A GaAs buffer layer with a low threading dislocation density (TDD) of 4.3 × 10 6 cm -2 was first deposited using an optimized three-step growth method by molecular beam epitaxy. Then, an eight-layer QD laser structure with p-type modulation doping to enhance the temperature stability of the device was subsequently grown on the low TDD Si-based GaAs buffer layer. It is shown that the QD laser exhibits the ultra-high temperature stability with a characteristic temperature T 0 =∞ and T 1 =∞ in the wide temperature range of 10-75 °C and 10-140 °C, respectively. Moreover, a maximum CW operating temperature of up to 150 °C and a pulsed operating temperature of up to 160…

We report the generation of picosecond pulsed light at a 266 nm wavelength with an average power of 53 W. We developed a picosecond pulsed 1064 nm laser source with an average power of 261 W, a repetition rate of 1 MHz, and a pulse duration of 14 ps, using a gain-switched DFB laser diode as a seed laser and a 914 nm laser-diode-pumped Nd-doped YVO4 power amplifier. We achieved stable generation of 266 nm light with an average power of 53 W from frequency quadrupling using an LBO and a CLBO crystals. The amplified power of 261 W and the 266 nm average power of 53 W from the 914 nm pumped Nd:YVO4 amplifier are the highest ever reported, to the best of our knowledge.

We develop and demonstrate a compact (less than 6 mL) portable Fabry-Pérot optical reference cavity. A laser locked to the cavity is thermal noise limited at 2 × 10−14 fractional frequency stability. Broadband feedback control with an electro-optic modulator enables near thermal-noise-limited phase noise performance from 1 Hz to 10 kHz offset frequencies. The additional low vibration, temperature, and holding force sensitivity of our design makes it well suited for out-of-the-lab applications such as optically derived low noise microwave generation, compact and mobile optical atomic clocks, and environmental sensing through deployed fiber networks.

A Rydberg atom-based mixer has opened up a new method to characterize microwave electric fields such as the precise measurement of their phase and strength. This study further demonstrates, theoretically and experimentally, a method to accurately measure the polarization of a microwave electric field based on a Rydberg atom-based mixer. The results show that the amplitude of the beat note changes with the polarization of the microwave electric field in a period of 180 degrees, and in the linear region a polarization resolution better than 0.5 degree can be easily obtained which reaches the best level by a Rydberg atomic sensor. More interestingly, the mixer-based measurements are immune to the polarization of the light field that forms the Rydberg EIT. This method considerably simplifies theoretical analysis and the experimental system required for measuring microwave polarization using Rydberg atoms and is of interest in microwave sensing.

Digital holography is a 3D imaging technique by emitting a laser beam with a plane wavefront to an object and measuring the intensity of the diffracted waveform, called holograms. The object's 3D shape can be obtained by numerical analysis of the captured holograms and recovering the incurred phase. Recently, deep learning (DL) methods have been used for more accurate holographic processing. However, most supervised methods require large datasets to train the model, which is rarely available in most DH applications due to the scarcity of samples or privacy concerns. A few one-shot DL-based recovery methods exist with no reliance on large datasets of paired images. Still, most of these methods often neglect the underlying physics law that governs wave propagation. These methods offer a black-box operation, which is not explainable, generalizable, and transferrable to other samples and applications. In this work, we propose a new DL architecture based on generative adversarial networks that uses a discriminative network for realizing a semantic measure for reconstruction quality while…

Low extinction ratio (ER) and high temperature cross-sensitivity are serious but common problems for most strain sensors based on Vernier effect. In this study, a hybrid cascade strain sensor of a Mach–Zehnder interferometer (MZI) and a Fabry–Perot interferometer (FPI) with high sensitivity and high ER based on Vernier effect is proposed. The two interferometers are separated by a long single-mode fiber (SMF). The MZI is used as the reference arm, which can be flexibly embedded in the SMF. The FPI is used as the sensing arm and the hollow-core fiber (HCF) as the FP cavity to reduce optical loss. Simulation and experiments have proven that this method can significantly increase ER. At the same time, the second reflective face of the FP cavity is indirectly spliced to increase the active length to improve the strain sensitivity. Through the amplification of Vernier effect, the maximum strain sensitivity is –649.18 p m / μ ε , and the temperature sensitivity is only 5.76 pm/ ∘ C . The magnetic field was measured by combining the sensor with a Terfenol–D (magneto–strictive material)…

We propose and experimentally demonstrate a femtosecond laser plane-by-plane (Pl-b-Pl) technology for inscription of high-quality fiber Bragg gratings (FBGs). The spherical aberration (SA) was introduced to elongate the focal volume, and then combined with the scanning process, an expanded rectangular refractive index modification (RIM) region can be achieved. Such RIM regions exhibit a length of 15 µm and a width of 14 µm. Note that it consists of a negative region and a positive region. We have systematically studied the influence of the overlap between the RIM region and fiber core on the spectrum of FBG. After optimizing, the core of a conventional single-mode fiber (SMF) is covered completely by using the positive RIM region, resulting in a significant enhancement of the coupling strength coefficient (i.e., 3177.6 m -1 ). A 500 µm long FBG assembled by using these RIM regions can achieve a high reflectivity of 95.83%. Moreover, the cladding mode resonances in transmission spectrum are suppressed thoroughly, since the localized effect in RIM region was avoided. In addition, this…

Flying-focus pulses promise to revolutionize laser-driven secondary sources by decoupling the trajectory of the peak intensity from the native group velocity of the medium over distances much longer than a Rayleigh range. Previous demonstrations of the flying focus have either produced an uncontrolled trajectory or a trajectory that is engineered using chromatic methods that limit the duration of the peak intensity to picosecond scales. Here we demonstrate a controllable ultrabroadband flying focus using a nearly achromatic axiparabola-echelon pair. Spectral interferometry using an ultrabroadband superluminescent diode was used to measure designed super- and subluminal flying-focus trajectories and the effective temporal pulse duration as inferred from the measured spectral phase. The measurements demonstrate that a nearly transform- and diffraction-limited moving focus can be created over a centimeter-scale-an extended focal region more than 50 Rayleigh ranges in length. This ultrabroadband flying-focus and the novel axiparabola-echelon configuration used to produce it are ideally…

Digital in-line holographic microscopy (DIHM) enables efficient and cost-effective computational quantitative phase imaging with a large field of view, making it valuable for studying cell motility, migration, and bio-microfluidics. However, the quality of DIHM reconstructions is compromised by twin-image noise, posing a significant challenge. Conventional methods for mitigating this noise involve complex hardware setups or time-consuming algorithms with often limited effectiveness. In this work, we propose UTIRnet, a deep learning solution for fast, robust, and universally applicable twin-image suppression, trained exclusively on numerically generated datasets. The availability of open-source UTIRnet codes facilitates its implementation in various DIHM systems without the need for extensive experimental training data. Notably, our network ensures the consistency of reconstruction results with input holograms, imparting a physics-based foundation and enhancing reliability compared to conventional deep learning approaches. Experimental verification was conducted among others on live…

This paper proposes applying the nested U 2 -Net to a two-dimensional phase unwrapping (PU). PU has been a classic well-posed problem since conventional PU methods are always limited by the Itoh condition. Numerous studies conducted in recent years have discovered that data-driven deep learning techniques can overcome the Itoh constraint and significantly enhance PU performance. However, most deep learning methods have been tested only on Gaussian white noise in a single environment, ignoring the more widespread scattered noise in real phases. The difference in the unwrapping performance of deep network models with different strategies under the interference of different kinds of noise or drastic phase changes is still unknown. This study compares and tests the unwrapping performance of U-Net, DLPU-Net, VUR-Net, PU-GAN, U 2 -Net, and U 2 -Netp under the interference of additive Gaussian white noise and multiplicative speckle noise by simulating the complex noise environment in the real samples. It is discovered that the U 2 -Net composed of U-like residual blocks performs stronger…

We report the flexible on-target delivery of 800 nm wavelength, 5 GW peak power, 40 fs duration laser pulses through an evacuated and tightly coiled 10 m long hollow-core nested anti-resonant fiber by positively chirping the input pulses to compensate for the anomalous dispersion of the fiber. Near-transform-limited output pulses with high beam quality and a guided peak intensity of 3 PW/cm 2 were achieved by suppressing plasma effects in the residual gas by pre-pumping the fiber with laser pulses after evacuation. This appears to cause a long-term removal of molecules from the fiber core. Identifying the fluence at the fiber core-wall interface as the damage origin, we scaled the coupled energy to 2.1 mJ using a short piece of larger-core fiber to obtain 20 GW at the fiber output. This scheme can pave the way towards the integration of anti-resonant fibers in mJ-level nonlinear optical experiments and laser-source development.

To avoid coating and filling into the fiber holes, facilitate the phase-matching and eliminate cross-sensitivity problems, we propose a surface plasmon resonance sensor based on a fan-shaped microstructured optical fiber (MOF) for the simultaneous sensing of temperature and refractive index (RI). The fan-shaped structure is fabricated by polishing two sides of MOF with an angle of 120°. One side is coated with the gold film and polydimethylsiloxane layer for temperature sensing, and the other side is only coated with the gold film for RI sensing. The two sensing sides can support resonance peaks with two polarized directions at the angle of 120°, which are independent without cross-sensitivity. By monitoring the shifts of the two polarized peaks, our numerical results show that the temperature sensitivity is 2.932 nm/°C in the range of 30 °C to 40 °C, and RI sensitivity is 4235 nm/RIU in the range of 1.38 to 1.39, respectively.

Bandpass microwave photonic filter (MPF) can be achieved based on the well-known phase to intensity conversion method by using phase modulation and single micro-ring resonator (MRR) notch filter. Since MRR could introduce residual phase in handling one optical sideband, the out-of-band radio frequency (RF) rejection ratio and the shape factor of the bandpass MPF are very limited. Here, by introducing another MRR to handle the other optical sideband, the residual phase can be greatly suppressed, thus the filter's performance can be greatly improved. The proposed bandpass MPF was both verified theoretically and experimentally. Compared with the single MRR, the out-of-band RF rejection ratio and the shape factor were improved by 20 dB and 1.67, respectively. Furthermore, the bandpass MPF's bandwidth is reconfigurable by adjusting the optical carrier's frequency or the two MRRs' amplitude coupling coefficients. The bandpass MPF's center frequency is also tunable by changing the resonant wavelengths of two MRRs in the opposite direction simultaneously. Experimentally, bandwidth…