The 100 most-cited articles in Optics Express, 2018

anniversary of Optics Express, this paper reviews the evolution of optical fiber communication systems, and through a look at the previous 20 years attempts to extrapolate fiber-optic technology needs and potential solution paths over the coming 20 years. Well aware that 20-year extrapolations are inherently associated with great uncertainties, we still hope that taking a significantly longer-term view than most texts in this field will provide the reader with a broader perspective and will encourage the much needed out-of-the-box thinking to solve the very significant technology scaling problems ahead of us. Focusing on the optical transport and switching layer, we cover aspects of large-scale spatial multiplexing, massive opto-electronic arrays and holistic optics-electronics-DSP integration, as well as optical node architectures for switching and multiplexing of spatial and spectral superchannels.

anniversary of the journal is therefore an opportune moment to consider the state of progress in the field of terahertz imaging. This article discusses some of the compelling reasons that one may wish to form images in the THz range, in order to provide a perspective of how far the field has come since the early demonstrations of the mid-1990's. It then focuses on a few of the more prominent frontiers of current research, highlighting their impacts on both fundamental science and applications.

Since the emergence of optical fiber communications, lithium niobate (LN) has been the material of choice for electro-optic modulators, featuring high data bandwidth and excellent signal fidelity. Conventional LN modulators however are bulky, expensive and power hungry, and cannot meet the growing demand in modern optical data links. Chip-scale, highly integrated, LN modulators could offer solutions to this problem, yet the fabrication of low-loss devices in LN thin films has been challenging. Here we overcome this hurdle and demonstrate monolithically integrated LN electro-optic modulators that are significantly smaller and more efficient than traditional bulk LN devices, while preserving LN's excellent material properties. Our compact LN electro-optic platform consists of low-loss nanoscale LN waveguides, micro-ring resonators and miniaturized Mach-Zehnder interferometers, fabricated by directly shaping LN thin films into sub-wavelength structures. The efficient confinement of both optical and microwave fields at the nanoscale dramatically improves the device performances…

We demonstrate advanced transversal radio frequency (RF) and microwave functions based on a Kerr optical comb source generated by an integrated micro-ring resonator. We achieve extremely high performance for an optical true time delay aimed at tunable phased array antenna applications, as well as reconfigurable microwave photonic filters. Our results agree well with theory. We show that our true time delay would yield a phased array antenna with features that include high angular resolution and a wide range of beam steering angles, while the microwave photonic filters feature high Q factors, wideband tunability, and highly reconfigurable filtering shapes. These results show that our approach is a competitive solution to implementing reconfigurable, high performance and potentially low cost RF and microwave signal processing functions for applications including radar and communication systems.

The original Kerker effect was introduced for a hypothetical magnetic sphere, and initially it did not attract much attention due to a lack of magnetic materials required. Rejuvenated by the recent explosive development of the field of metamaterials and especially its core concept of optically-induced artificial magnetism, the Kerker effect has gained an unprecedented impetus and rapidly pervaded different branches of nanophotonics. At the same time, the concept behind the effect itself has also been significantly expanded and generalized. Here we review the physics and various manifestations of the generalized Kerker effects, including the progress in the emerging field of meta-optics that focuses on interferences of electromagnetic multipoles of different orders and origins. We discuss not only the scattering by individual particles and particle clusters, but also the manipulation of reflection, transmission, diffraction, and absorption for metalattices and metasurfaces, revealing how various optical phenomena observed recently are all ubiquitously related to the Kerker's concept.

), root mean square error, and regression slopes, are most appropriate for Gaussian distributions without outliers and, therefore, are often not ideal for ocean color algorithm performance assessment, which is often limited by sample availability. In contrast, metrics based on simple deviations, such as bias and mean absolute error, as well as pair-wise comparisons, often provide more robust and straightforward quantities for evaluating ocean color algorithms with non-Gaussian distributions and outliers. This study uses a SeaWiFS chlorophyll-a validation data set to demonstrate a framework for satellite data product assessment and recommends a multi-metric and user-dependent approach that can be applied within science, modeling, and resource management communities.

The ability to control thermal radiation is of fundamental importance for a wide range of applications. Nanophotonic structures, where at least one of the structural features are at a wavelength or sub-wavelength scale, can have thermal radiation properties that are drastically different from conventional thermal emitters, and offer exciting opportunities for energy applications. Here we review recent developments of nanophotonic control of thermal radiation, and highlight some exciting energy application opportunities, such as daytime radiative cooling, thermal textile, and thermophotovoltaic systems that are enabled by nanophotonic structures.

) cubes and an aluminum (Al) bottom film. The proposed structure can achieve nearly perfect absorption with an average absorbance of 97% spanning a broad range from visible to near-infrared (i.e., from 354 nm to 1066 nm), showing a 90% absorption bandwidth over 712 nm, and the peak absorption is up to 99.8%. The excitation of superior surface plasmon resonance combined with the resonance induced by the metal-insulator-metal Fabry-Perot (FP) cavity leads to this broadband perfect absorption. The polarization and angle insensitivity is demonstrated by analyzing the absorption performance with oblique incidences for both TE- and TM-polarized waves. In addition, we discuss the impact of various metal materials and geometry structure on absorption performance in detail. The proposed broadband metamaterial absorber shows a promising prospect in applications such as solar cell, infrared detection, and imaging. Moreover, the use of a thin titanium cap and an aluminum film instead of noble metals has the potential to reduce production cost in applications.

µLEDs with ALD sidewall passivation and without sidewall passivation were 33% and 24%, respectively. The results from ALD sidewall passivation revealed that the size-dependent influences on peak EQE can be minimized by proper sidewall treatment.

The research and development of optical metasurfaces has been primarily driven by the curiosity for novel optical phenomena that are unattainable from materials that exist in nature and by the desire for miniaturization of optical devices. Metasurfaces constructed of artificial patterns of subwavelength depth make it possible to achieve flat, ultrathin optical devices of high performance. A wide variety of fabrication techniques have been developed to explore their unconventional functionalities which in many ways have revolutionized the means with which we control and manipulate electromagnetic waves. The relevant research community could benefit from an overview on recent progress in the fabrication and applications of the metasurfaces. This review article is intended to serve that purpose by reviewing the state-of-the-art fabrication methods and surveying their cutting-edge applications.

W/√Hz. This performance demonstrates that QEPTS can be an ultra-high sensitive technique for gas detection and shows superiority when compared to usually used methods of tunable diode laser absorption spectroscopy (TDLAS) and quartz-enhanced photoacoustic spectroscopy (QEPAS). Furthermore, when compared to an optical detector, especially a costly mercury cadmium telluride (MCT) detector with cryogenic cooling used in TDLAS, a quartz-tuning-fork is much cheap and tiny. Besides, compared to the QEPAS technique, QEPTS is a non-contact measurement technique and therefore can be used for standoff and remote trace gas detection.

With the ability of harvesting the coldness of universe as a thermodynamic resource, radiative cooling technology is important for a broad range of applications such as passive building cooling, refrigeration, and renewable energy harvesting. However, all existing radiative cooling technologies utilize static structures, which lack the ability of self-adaptive tuning based on demand. Here we present the concept of self-adaptive radiative cooling based on phase change materials such as vanadium dioxide. We design a photonic structure that can adaptively turn 'on' and 'off' radiative cooling, depending the ambient temperature, without any extra energy input for switching. Our results here lead to new functionalities of radiative cooling and can potentially be used in a wide range of applications for the thermal managements of buildings, vehicles and textiles.

We demonstrate an ultra-high-bandwidth Mach-Zehnder electro-optic modulator (EOM), based on foundry-fabricated silicon (Si) photonics, made using conventional lithography and wafer-scale fabrication, oxide-bonded at 200C to a lithium niobate (LN) thin film. Our design integrates silicon photonics light input/output and optical components, such as directional couplers and low-radius bends. No etching or patterning of the thin film LN is required. This hybrid Si-LN MZM achieves beyond 106 GHz 3-dB electrical modulation bandwidth, the highest of any silicon photonic or lithium niobate (phase) modulator.

. Absorptance spectra analysis shows a clear independence of polarization and incident angle. The presented results may have tunable spectral applications in sensor, detector, and thermophotovoltaic device working at terahertz frequency bands.

Few-layer bismuthene is an emerging two-dimensional material in the fields of physics, chemistry, and material science. However, its nonlinear optical property and the related photonics device have been seldom studied so far. Here, we demonstrate a sub-200 fs soliton mode-locked erbium-doped fiber laser (EDFL) using a microfiber-based bismuthene saturable absorber for the first time, to the best of our knowledge. The bismuthene nanosheets are synthesized by the sonochemical exfoliation method and transferred onto the taper region of a microfiber by the optical deposition method. Stable soliton pulses centered at 1561 nm with the shortest pulse duration of about 193 fs were obtained. Our findings unambiguously imply that apart from its fantastic electric and thermal properties, few-layer bismuthene may also possess attractive optoelectronic properties for nonlinear photonics, such as mode-lockers, Q-switchers, optical modulators and so on.

Convolutional neural networks (CNNs) have gained tremendous success in solving complex inverse problems. The aim of this work is to develop a novel CNN framework to reconstruct video sequences of dynamic live cells captured using a computational microscopy technique, Fourier ptychographic microscopy (FPM). The unique feature of the FPM is its capability to reconstruct images with both wide field-of-view (FOV) and high resolution, i.e. a large space-bandwidth-product (SBP), by taking a series of low resolution intensity images. For live cell imaging, a single FPM frame contains thousands of cell samples with different morphological features. Our idea is to fully exploit the statistical information provided by these large spatial ensembles so as to make predictions in a sequential measurement, without using any additional temporal dataset. Specifically, we show that it is possible to reconstruct high-SBP dynamic cell videos by a CNN trained only on the first FPM dataset captured at the beginning of a time-series experiment. Our CNN approach reconstructs a 12800×10800 pixel phase image…

We present a computational framework for efficient optimization-based "inverse design" of large-area "metasurfaces" (subwavelength-patterned surfaces) for applications such as multi-wavelength/multi-angle optimizations, and demultiplexers. To optimize surfaces that can be thousands of wavelengths in diameter, with thousands (or millions) of parameters, the key is a fast approximate solver for the scattered field. We employ a "locally periodic" approximation in which the scattering problem is approximated by a composition of periodic scattering problems from each unit cell of the surface, and validate it against brute-force Maxwell solutions. This is an extension of ideas in previous metasurface designs, but with greatly increased flexibility, e.g. to automatically balance tradeoffs between multiple frequencies or to optimize a photonic device given only partial information about the desired field. Our approach even extends beyond the metasurface regime to non-subwavelength structures where additional diffracted orders must be included (but the period is not large enough to apply…

In this paper, ultra-thin metalenses are proposed to generate converging and non-diffractive vortex beam carrying orbital angular momentum (OAM) in microwave region. Phase changes are introduced to the transmission cross-polarized wave by tailoring spatial orientation of Pancharatnam-Berry phase unit cell. Based on the superposition of phase profile of spiral phase plate and that of a converging lens or an axicon, vortex beam carrying OAM mode generated by the metalens can also exhibit characteristics of a focusing beam or a Bessel beam. Measured field intensities and phase distributions at microwave frequencies verify the theoretical design procedure. The proposed method provides an efficient approach to control the radius of vortex beam carrying OAM mode in microwave wireless applications for medium-short range distance.

RIU. The characteristics of a single D-shape PCF-SPR sensor with the same structural parameters are compared with those of the dual PCFs sensor and the latter has distinct advantages concerning the spectral sensitivity, resolution, amplitude sensitivity, and figure of merits (FOM).

Quantum key distribution (QKD) provides information-theoretic security based on the laws of quantum mechanics. The desire to reduce costs and increase robustness in real-world applications has motivated the study of coexistence between QKD and intense classical data traffic in a single fiber. Previous works on coexistence in metropolitan areas have used wavelength-division multiplexing, however, coexistence in backbone fiber networks remains a great experimental challenge, as Tbps data of up to 20 dBm optical power is transferred, and much more noise is generated for QKD. Here we present for the first time, to the best of our knowledge, the integration of QKD with a commercial backbone network of 3.6 Tbps classical data at 21 dBm launch power over 66 km fiber. With 20 GHz pass-band filtering and large effective core area fibers, real-time secure key rates can reach 4.5 kbps and 5.1 kbps for co-propagation and counter-propagation at the maximum launch power, respectively. This demonstrates feasibility and represents an important step towards building a quantum network that coexists…

. The design, fabrication, and characterization of our broadband modulator is presented in this work.

layer. Plasmonic hybridization between two graphene rings significantly enlarges the absorption bandwidth, which can be further tuned by gating the graphene. Moreover, the specific design also makes our device insensitive to the incident angle and polarization state of impinging EM waves. Our results may inspire certain wave-modulation-related applications, such as THz imaging, smart absorber, tunable sensor, etc.

Quantum key distribution (QKD) together with one time pad encoding can provide information-theoretical security for communication. Currently, though QKD has been widely deployed in many metropolitan fiber networks, its implementation in a large scale remains experimentally challenging. This letter provides a brief review on the experimental efforts towards the goal of global QKD, including the security of practical QKD with imperfect devices, QKD metropolitan and backbone networks over optical fiber and satellite-based QKD over free space.

Optical components, such as lenses, have traditionally been made in the bulk form by shaping glass or other transparent materials. Recent advances in metasurfaces provide a new basis for recasting optical components into thin, planar elements, having similar or better performance using arrays of subwavelength-spaced optical phase-shifters. The technology required to mass produce them dates back to the mid-1990s, when the feature sizes of semiconductor manufacturing became considerably denser than the wavelength of light, advancing in stride with Moore's law. This provides the possibility of unifying two industries: semiconductor manufacturing and lens-making, whereby the same technology used to make computer chips is used to make optical components, such as lenses, based on metasurfaces. Using a scalable metasurface layout compression algorithm that exponentially reduces design file sizes (by 3 orders of magnitude for a centimeter diameter lens) and stepper photolithography, we show the design and fabrication of metasurface lenses (metalenses) with extremely large areas, up to…

Photonic switches are increasingly considered for insertion in high performance datacenter architectures to meet the growing performance demands of interconnection networks. We provide an overview of photonic switching technologies and develop an evaluation methodology for assessing their potential impact on datacenter performance. We begin with a review of three categories of optical switches, namely, free-space switches, III-V integrated switches and silicon integrated switches. The state-of-the-art of MEMS, LCOS, SOA, MZI and MRR switching technologies are covered, together with insights on their performance limitations and scalability considerations. The performance metrics that are required for optical switches to truly emerge in datacenters are discussed and summarized, with special focus on the switching time, cost, power consumption, scalability and optical power penalty. Furthermore, the Pareto front of the switch metric space is analyzed. Finally, we propose a hybrid integrated switch fabric design using the III-V/Si wafer bonding technique and investigate its potential…

A novel joint atmospheric turbulence (AT) detection and adaptive demodulation technique based on convolutional neural network (CNN) are proposed for the OAM-based free-space optical (FSO) communication. The AT detecting accuracy (ATDA) and the adaptive demodulating accuracy (ADA) of the 4-OAM, 8-OAM, 16-OAM FSO communication systems over computer-simulated 1000-m turbulent channels with 4, 6, 10 kinds of classic ATs are investigated, respectively. Compared to previous approaches using the self-organizing mapping (SOM), deep neural network (DNN) and other CNNs, the proposed CNN achieves the highest ATDA and ADA due to the advanced multi-layer representation learning without feature extractors designed carefully by numerous experts. For the AT detection, the ATDA of CNN is near 95.2% for 6 kinds of typical ATs, in cases of both weak and strong ATs. For the adaptive demodulation of optical vortices (OV) carrying OAM modes, the ADA of CNN is about 99.8% for the 8-OAM system over the computer-simulated 1000-m free-space strong turbulent link. In addition, the effects of image resolution,…

Single-pixel imaging uses a single-pixel detector, rather than a focal plane detector array, to image a scene. It provides advantages for applications such as multi-wavelength, three-dimensional imaging. However, low frame rates have been a major obstacle inhibiting the use of computational ghost imaging technique in wider applications since its invention one decade ago. To address this problem, a computational ghost imaging scheme, which utilizes an LED-based, high-speed illumination module is presented in this work. At 32 × 32 pixel resolution, the proof-of-principle system achieved continuous imaging with 1000 fps frame rate, approximately two orders larger than those of other existing ghost imaging systems. The proposed scheme provides a cost-effective and high-speed imaging technique for dynamic imaging applications.

Integrating photonics with advanced electronics leverages transistor performance, process fidelity and package integration, to enable a new class of systems-on-a-chip for a variety of applications ranging from computing and communications to sensing and imaging. Monolithic silicon photonics is a promising solution to meet the energy efficiency, sensitivity, and cost requirements of these applications. In this review paper, we take a comprehensive view of the performance of the silicon-photonic technologies developed to date for photonic interconnect applications. We also present the latest performance and results of our "zero-change" silicon photonics platforms in 45 nm and 32 nm SOI CMOS. The results indicate that the 45 nm and 32 nm processes provide a "sweet-spot" for adding photonic capability and enhancing integrated system applications beyond the Moore-scaling, while being able to offload major communication tasks from more deeply-scaled compute and memory chips without complicated 3D integration approaches.

iterations, taking advantage of the very fast evaluation of the gradient in high-dimensional parameter spaces. The obtained Q factor is more than one order of magnitude higher than that of the base cavity and more than twice that of the highest Q factors reported so far for cavities with similar modal volumes. This approach can optimize 2D-PC structures over a parameter space of a size unfeasibly large for previous optimization methods that were based solely on direct calculations. We believe that this approach is also useful for improving other optical characteristics.

We analyze the performance of high dynamic range liquid crystal displays (LCDs) using a two-dimensional local dimming mini-LED backlight. The halo effect of such a HDR display system is investigated by both numerical simulation and human visual perception experiment. The halo effect is mainly governed by two factors: intrinsic LCD contrast ratio (CR) and dimming zone number. Based on our results, to suppress the halo effect to indistinguishable level, a LCD with CR≈5000:1 requires about 200 local dimming zones, while for a LCD with CR≈2000:1 the required dimming zone number is over 3000. Our model provides useful guidelines to optimize the mini-LED backlit LCDs for achieving dynamic contrast ratio comparable to organic LED displays.

Ultrafast fiber lasers have the potential to make applications of ultrashort pulses widespread - techniques not only for scientists, but also for doctors, manufacturing engineers, and more. Today, this potential is only realized in refractive surgery and some femtosecond micromachining. The existing market for ultrafast lasers remains dominated by solid-state lasers, primarily Ti:sapphire, due to their superior performance. Recent advances show routes to ultrafast fiber sources that provide performance and capabilities equal to, and in some cases beyond, those of Ti:sapphire, in compact, versatile, low-cost devices. In this paper, we discuss the prospects for future ultrafast fiber lasers built on new kinds of pulse generation that capitalize on nonlinear dynamics. We focus primarily on three promising directions: mode-locked oscillators that use nonlinearity to enhance performance; systems that use nonlinear pulse propagation to achieve ultrashort pulses without a mode-locked oscillator; and multimode fiber lasers that exploit nonlinearities in space and time to obtain unparalleled…

Although ptychography does not require a precise knowledge of the illumination wavefront, common implementations rely upon assumptions such as accurate knowledge of the scan positions and constant illumination. Limited validity of these assumptions results in deterioration of the reconstruction quality. We present a generalized ptychography method that optimizes the reconstruction along multiple directions. In our manuscript, we demonstrate that the additional flexibility not only helps to amend imprecisions of the ptychography model in a self-consistent way but additionally leads to faster convergence without a significant increase of the computational cost per iteration.

It is well known that in-line digital holography (DH) makes use of the full pixel count in forming the holographic imaging. But it usually requires phase-shifting or phase retrieval techniques to remove the zero-order and twin-image terms, resulting in the so-called two-step reconstruction process, i.e., phase recovery and focusing. Here, we propose a one-step end-to-end learning-based method for in-line holography reconstruction, namely, the eHoloNet, which can reconstruct the object wavefront directly from a single-shot in-line digital hologram. In addition, the proposed learning-based DH technique has strong robustness to the change of optical path difference between reference beam and object light and does not require the reference beam to be a plane or spherical wave.

. Furthermore, our scheme could also be expanded to include more modes.

Efficient coupling between integrated optical waveguides and optical fibers is essential to the success of silicon photonics. While many solutions exist, perfectly vertical grating couplers that scatter light out of a waveguide in the direction normal to the waveguide's top surface are an ideal candidate due to their potential to reduce packaging complexity. Designing such couplers with high efficiencies, however, has proven difficult. In this paper, we use inverse electromagnetic design techniques to optimize a high efficiency two-layer perfectly vertical silicon grating coupler. Our base design achieves a chip-to-fiber coupling efficiency of 99.2% (-0.035 dB) at 1550 nm. Using this base design as a starting point, we run subsequent constrained optimizations to realize vertical couplers with coupling efficiencies over 96% and back reflections of less than -40 dB which can be fabricated using 65 nm-resolution lithography. These results demonstrate a new path forward for designing fabrication-tolerant ultra high efficiency grating couplers.

than the LED with 20 pairs of MQWs. These results show that the optimization of the number of QWs is needed to obtain maximum EQE of micro-LEDs.

A low-loss and low-crosstalk multimode waveguide bend is proposed and demonstrated for mode-division-multiplexed optical interconnects. The proposed 90°-bend is composed of two identical 45°-bends, which are defined as modified Euler curves. For the designed 90° Euler-bend with a core width of 2.36 μm for supporting four TM-polarization modes, it is allowed to achieve an effective radius as small as 45 μm, which is about 1/4 of the radius (~175 μm) for a regular 90° arc-bend. In theory, this proposed 90° Euler-bend has very low excess losses (<0.1 dB) and very low inter-mode crosstalks (<-25 dB) over a broad wavelength-band. A silicon photonic integrated circuit is designed, fabricated and characterized by integrating a pair of mode (de)multiplexers and a multimode bus waveguide with a Euler S-bend consisting of two cascaded 90° Euler-bends. The measurement results show that the fabricated Euler S-bend has low excess losses of <0.5 dB and low inter-mode crosstalks of <-20 dB over a broad band from 1520 nm to 1610 nm for all the 4 mode-channels of TM polarization.

. Owing to strong coupling strength, high sensitivity, high FOM and improved sensing resolution, the proposed sensor is suited for real-time, inexpensive and accurate detection of biomedical and biological analytes, biomolecules, and organic chemicals.

Planar optical chirality of a metasurface measures its differential response between left and right circularly polarized (CP) lights and governs the asymmetric transmission of CP lights. In 2D ultra-thin plasmonic structures the circular dichroism is limited to 25% in theory and it requires high absorption loss. Here we propose and numerically demonstrate a planar chiral all-dielectric metasurface that exhibits giant circular dichroism and transmission asymmetry over 0.8 for circularly polarized lights with negligible loss, without bringing in bianisotropy or violating reciprocity. The metasurface consists of arrays of high refractive index germanium Z-shape resonators that break the in-plane mirror symmetry and induce cross-polarization conversion. Furthermore, at the transmission peak of one handedness, the transmitted light is efficiently converted into the opposite circular polarization state, with a designated geometric phase depending on the orientation angle of the optical element. In this way, the optical component sets before and after the metasurface to filter the light of…

Quantum frequency combs from chip-scale integrated sources are promising candidates for scalable and robust quantum information processing (QIP). However, to use these quantum combs for frequency domain QIP, demonstration of entanglement in the frequency basis, showing that the entangled photons are in a coherent superposition of multiple frequency bins, is required. We present a verification of qubit and qutrit frequency-bin entanglement using an on-chip quantum frequency comb with 40 mode pairs, through a two-photon interference measurement that is based on electro-optic phase modulation. Our demonstrations provide an important contribution in establishing integrated optical microresonators as a source for high-dimensional frequency-bin encoded quantum computing, as well as dense quantum key distribution.

Lithium niobate on insulator (LNOI) photonics promises to combine the excellent nonlinear properties of lithium niobate with the high complexity achievable by high contrast waveguides. However, to date, fabrication challenges have resulted in high-loss and sidewall-angled waveguides, limiting its applicability. We report LNOI single mode waveguides with ultra low propagation loss of 0.4 dB/cm and sidewall angle of 75°. Our results open the route to a highly efficient photonic platform with applications ranging from high-speed telecommunication to quantum technology.

Figure 1(c) in [Y. Wang, Optics Express 26, 1910 (2018)] contains an error and is corrected in this erratum.

materials, paying special attention to their energy bands, photoluminescence/absorption spectra, excitonic fine structure, and to the dynamics of exciton formation and valley depolarization. We also discuss light-matter interactions in such hybrid exciton-polariton structures. Finally, we focus on weak and strong coupling regimes in monolayer TMDCs-based exciton-polariton systems, envisioning research directions and future opportunities for this material platform.

Photonic reservoir computing is a new paradigm for performing high-speed prediction and classification tasks in an efficient manner. The major challenge for the miniaturization of photonic reservoir computing is the need for the use of photonic integrated circuits. Herein, we experimentally demonstrate reservoir computing using a photonic integrated circuit with a semiconductor laser and a short external cavity. We propose a method to increase the number of virtual nodes in delayed feedback using short node intervals and outputs from multiple delay times. We perform time-series prediction and nonlinear channel equalization tasks using reservoir computing with the photonic integrated circuit. We show that the photonic integrated circuit with optical feedback outperforms the photonic integrated circuit without optical feedback for prediction tasks. To enhance the memory effect we feed past input signals in the current input data and demonstrate successful performance in an n-step-ahead prediction task.

Synchrotron-based X-ray micro-tomography systems often suffer severe ring artifacts in reconstructed images. In sinograms the artifacts appear as straight lines or stripe artifacts. These artifacts are caused by the irregular response of a detecting system giving rise to a variety of observed types of stripes: full stripes, partial stripes, fluctuating stripes, and unresponsive stripes. The use of pre-processing techniques such as distortion correction or phase retrieval blurs and enlarges these stripes. It is impossible for a single approach to remove all types of stripe artifacts. Here, we propose three techniques for tackling all of them. The proposed techniques are easy to implement; do not generate extra stripe artifacts and void-center artifacts; and give superior quality on challenging data sets and in comparison with other techniques. Implementations in Python and a challenging data set are available for download.

We report the design, fabrication, and measurement of an ultra-broadband wide-angle reflective cross-polarization convertor using the compact H-shaped metasurface. The significant bandwidth expansion is attributed to the four electromagnetic resonances generated in an H-shaped unit. The simulation results show that the polarization conversion ratio (PCR) of the proposed metasurface is above 90% in the frequency range from 7 to 19.5 GHz and the relative bandwidth reaches 94%. The proposed metasurface is valid for a wide range of incident angles, and the mean polarization conversion ratio remains 80% even though the incident angle reaches 41.5°. The experimental results are in good agreement with the simulation results. Compared with the previous designs, the proposed linear polarization converter has a simple geometry but an excellent performance and hence has potential applications in microwave communications, remote sensors, and imaging systems.

With the proposal of dual-wavelength pumping (DWP) scheme, DWP Er:ZBLAN fiber lasers at 3.5 μm have become a fascinating area of research. However, limited by the absence of suitable saturable absorber, passively Q-switched and mode-locked fiber lasers have not been realized in this spectral region. Based on the layer-dependent bandgap and excellent photoelectric characteristics of black phosphorus (BP), BP is a promising candidate for saturable absorber near 3.5 μm. Here, we fabricated a 3.5-μm saturable absorber mirror (SAM) by transferring BP flakes onto a Au-coated mirror. With the as-prepared BP SAM, we realized Q-switching and mode-locking operations in the DWP Er:ZBLAN fiber lasers at 3.5 μm. To the best of our knowledge, it is the first time to achieve passively Q-switched and mode-locked pulses in 3.5 μm spectral region. The research results will not only promote the development of 3.5-μm pulsed fiber lasers but also open the photonics application of two-dimensional materials in this spectral region.

We demonstrate a wide-bandgap semiconductor photonics platform based on nanocrystalline aluminum nitride (AlN) on sapphire. This photonics platform guides light at low loss from the ultraviolet (UV) to the visible spectrum. We measure ring resonators with intrinsic quality factor (Q) exceeding 170,000 at 638 nm and Q >20,000 down to 369.5 nm, which shows a promising path for low-loss integrated photonics in UV and visible spectrum. This platform opens up new possibilities in integrated quantum optics with trapped ions or atom-like color centers in solids, as well as classical applications including nonlinear optics and on-chip UV-spectroscopy.

Previously, PbS/CdS core/shell quantum dots with excellent optical properties have been widely used as light-harvesting materials in solar cell and biomarkers in bio-medicine. However, the nonlinear absorption characteristics of PbS/CdS core/shell quantum dots have been rarely investigated. In this work, PbS/CdS core/shell quantum dots were successfully employed as nonlinear saturable absorber (SA) for demonstrating a mode-locked Er-doped fiber laser. Based on a film-type SA, which was prepared by incorporating the quantum dots with the polyvinyl alcohol (PVA), mode-locked Er-doped operation with a pulse width of 54 ps and a maximum average output power of 2.71 mW at the repetition rate of 3.302 MHz was obtained. Our long-time stable results indicate that the CdS shell can effectively protect the PbS core from the effect of photo-oxidation and PbS/CdS core/shell quantum dots were efficient SA candidates for demonstrating pulse fiber lasers due to its tunable absorption peak and excellent saturable absorption properties.

@10kHz can be achieved, and the applied sound pressure is 114dB and 65.8dB, respectively. The fiber optic acoustic sensor may have a great potential in seismic wave monitoring, photoacoustic spectroscopy and photoacoustic imaging application due to its compact structure, simple manufacturing, and low cost.

We report a multifunctional metamaterial composite structure that not only provides the broadband radar and thermal infrared bi-stealth function but also possesses an in-band microwave transmission window and high optical transparency. It is composed of four metasurface layers made of indium tin oxide (ITO) films with different surface resistances, which are specifically designed to sequentially control the infrared emission, microwave absorption and transmission. The fabricated sample exhibits a low reflectivity less than 10% in 1.5-9 GHz and a transmission peak of 50% around 3.8 GHz up to the incident angle of 30 degrees. In the infrared atmosphere window, a low thermal emissivity of about 0.52 is achieved. Meanwhile, it keeps good optical transparency by the use of the ITO films. The optically transparent, low-infrared-emissivity, radar-reflectionless and frequency-selective-transmission properties will enable the promising application of communication-compatible multispectral stealth technology.

We experimentally investigate delay-based photonic reservoir computing using semiconductor lasers with optical feedback and injection. We apply different types of temporal mask signals, such as digital, chaos, and colored-noise mask signals, as the weights between the input signal and the virtual nodes in the reservoir. We evaluate the performance of reservoir computing by using a time-series prediction task for the different mask signals. The chaos mask signal shows superior performance than that of the digital mask signals. However, similar prediction errors can be achieved for the chaos and colored-noise mask signals. Mask signals with larger amplitudes result in better performance for all mask signals in the range of the amplitude accessible in our experiment. The performance of reservoir computing is strongly dependent on the cut-off frequency of the colored-noise mask signals, which is related to the resonance of the relaxation oscillation frequency of the laser used as the reservoir.

In order to solve fading problem and realize sub-meter spatial resolution in DAS, this paper proposes a novel configuration of time-gated digital optical frequency domain reflectometry (TGD-OFDR) based on optical intensity modulator (IM). IM has a large modulation bandwidth and the positive and negative harmonics can be fully used to suppress fading while the spatial resolution remains unchanged. In experiments, with fading suppressed, the spatial resolution of DAS is 0.8 m and the strain resolution is about 245.6 pε√Hz along the total 9.8-km sensing fiber. The response bandwidth of vibration is 5 kHz, only/limited by the fiber length.

Through the manipulation of co-polarized reflection and cross-polarized reflection from a periodic array of metal-dielectric-metal resonators, a plethora of unprecedented metamaterial devices have been successfully demonstrated, such as perfect absorber and polarization converter. Recently, some broadband absorbers based on anisotropic resonators have been reported, which are actually poor absorbers when the cross-polarized reflection is considered. Here, we demonstrate that an ultra-wideband and high-efficiency reflective cross-polarization convertor can be achieved by breaking the symmetry of the resonator unit of a perfect absorber. Simulation results show that the polarization conversion ratio of the proposed metasurface is above 90% in the frequency range from 6.67 to 17.1 GHz and the relative bandwidth reaches 87.7%. The experimental results are in good agreement with the simulation results. The method paves a new way for the design of broadband polarization convertor, which can also be extended to the terahertz band.

A planar all-dielectric metamaterial made of a double-periodic lattice whose unit cell consists of a single subwavelength dielectric particle having the form of a disk possessing a penetrating hole is considered. The resonant states in the transmitted spectra of the metamaterial are identified considering modes inherent to the individual cylindrical dielectric resonator. A correlation between the asymmetry in the particle's geometry, which arises from the off-centered displacement of the hole and the formation of the Mie-type and trapped modes, is established. The advantages of using a coaxial-sector notch instead of a round hole for the trapped mode excitation are explained.

spot size converter. The demonstrated packaging method requires only passive alignment and is thus suitable for high-volume production. The laser has a largest output power of 11 mW with a maximum wall-plug efficiency of 4.2%, tunability of 60 nm (more than covering the C-band), and a side-mode suppression ratio of 55 dB (>46 dB across the C-band). The lowest measured linewidth is 37 kHz (<80 kHz across the C-band), which is the narrowest linewidth using a silicon-based external cavity. In addition, we successfully demonstrate all silicon-photonics-based transmission of 34 Gbaud (272 Gb/s) dual-polarization 16-QAM using our integrated laser and silicon photonic coherent transceiver. The results show no additional penalty compared to commercially available narrow linewidth tunable lasers. To the best of our knowledge, this is the first experimental demonstration of a complete silicon photonic based coherent link. This is also the first experimental demonstration of >250 Gb/s coherent optical transmission using a silicon micro-ring-based tunable laser.

matched current density with any perovskite bandgap between 1.56 and 1.68 eV.

We demonstrate dual-comb spectroscopy in the vicinity of 2 µm wavelength based on a single dual-wavelength dual-comb Thulium-doped fiber laser. The shared laser cavity ensures passively maintained mutual coherence between the two combs due to common mode environmental noise rejection. In a proof-of-principle experiment, the absorption characteristics caused by the water in the optical path that composes the dual-comb spectrometer are measured. The retrieved spectral positions of the water absorption dips match with the HITRAN database.

. In addition, we perform a detailed experimental parametric study of the coherent-lite system in which various system parameters are swept such as baud rate, reach, laser power and laser linewidth. Our results verify that the coherent-lite system can be realized using low-cost DFB lasers with linewidths of a few hundred kHz. Moreover, we compare the performance of the coherent-lite system with that of a conventional coherent transceiver leveraging the full DSP stack. Then, we evaluate the power consumption savings achieved by the coherent-lite scheme relative to a classic DSP-based coherent system. Assuming a CMOS node ranging from 28 to 7 nm for DSP implementation, our estimate shows that the coherent-lite scheme can save 95 to 78% of the power consumed by the following subsystems: analog-to-digital converters, chromatic dispersion compensation, 2 × 2 MIMO polarization demultiplexing and carrier recovery. Finally, we compare the power consumption of the coherent-lite scheme with more standard 400G IM-DD systems utilizing either eight or four parallel WDM lanes (8 × 50G and 4 ×…

We present a gradient-based algorithm to design general 1D grating couplers without any human input from start to finish, including a choice of initial condition. We show that we can reliably design efficient couplers to have multiple functionalities in different geometries, including conventional couplers for single-polarization and single-wavelength operation, polarization-insensitive couplers, and wavelength-demultiplexing couplers. In particular, we design a fiber-to-chip blazed grating with under 0.2 dB insertion loss that requires a single etch to fabricate and no back-reflector.

. By tuning the injection current to 44 mA, the output frequency of the proposed IOEO is located at 7.30 GHz with phase noise value of -91 dBc/Hz@1MHz. When the injection current is increased to 65 mA, the output frequency can be changed to 8.87 GHz with phase noise value of -92 dBc/Hz@1MHz. Both of the oscillation frequency can be slightly tuned within 20 MHz around the center oscillation frequency by tuning the injection current. The method about improving the performance of IOEO is carefully discussed at the end of in this article.

In this paper, we demonstrate a novel Gaussian kernel-aided deep neural network (GK-DNN) equalizer that can effectively compensate for the high nonlinear distortion of underwater PAM8 visible light communication (VLC) channels. The application of a Gaussian kernel can reduce the necessary training iterations to 47.06%, enabling it to outperform the traditional DNN equalizer. At the same time, a novel design strategy with respect to the structure of the GK-DNN equalizer is proposed, which can effectively save computing resources and reduce the data volume of the necessary training data set. By using the GK-DNN equalizer, a 1.5 Gbps PAM8 VLC system over 1.2-m underwater transmission is successfully demonstrated.

A metamaterial perfect absorber composed of a black phosphorus (BP) monolayer, a photonic crystal, and a metallic mirror is designed and investigated to enhance light absorption at terahertz frequencies. Numerical results reveal that the absorption is enhanced greatly with narrow spectra due to critical coupling, which is enabled by guided resonances. Intriguingly, the structure manifests the unusual polarization-dependent feature attributable to the anisotropy of black phosphorus. The quality factor of the absorber can be as high as 95.1 for one polarization while 63.5 for another polarization, which is consistent with the coupled wave theory. The absorption is tunable by varying key parameters, such as period, radius, slab thickness, incident angle, and polarization angle. Furthermore, the state of the system (i.e., critical coupling, over coupling, and under coupling) can be tuned by changing the electron doping of BP, thus achieving various applications. This work offers a paradigm to enhance the light-matter interaction in monolayer BP without plasmonic response, and this…

Conventional head-mounted displays present different images to each eye, and thereby create three-dimensional (3D) sensation for viewers. This method can only control the stimulus to vergence but not accommodation, which is located at the apparent location of the physical displays. The disrupted coupling between vergence and accommodation could cause considerable visual discomfort. To address this problem, in this paper a novel multi-focal plane 3D display system is proposed. A stack of switchable liquid crystal Pancharatnam-Berry phase lenses is implemented to create real depths for each eye, which is able to provide approximate focus cue and relieve the discomfort from vergence-accommodation conflict. The proposed multi-focal plane generation method has great potential for both virtual reality and augmented reality applications, where correct focus cue is highly desirable.

Interferenceless coded aperture correlation holography (I-COACH) is an incoherent digital holography technique for imaging 3D objects without two-wave interference. In I-COACH, the object beam is modulated by a pseudorandom coded phase mask (CPM) and propagates to the camera where its intensity pattern is recorded. The image of the object is reconstructed by a cross-correlation of the object intensity pattern with a point intensity response of the system, whereas the light from both the object and the point, are modulated by the same CPM. In order to recover the image of the object without bias level and background noise, multiple intensity recordings are necessary for both objects as well as the point object, which in turn significantly reduces the time resolution of imaging. In this study, a non-linear reconstruction technique is developed to reconstruct the image of the object with only a single camera shot. Furthermore, the proposed technique is adaptive to different experimental conditions in the sense of finding different optimal parameters for each experiment. The new method…

/Δf, reaches about 94.6, which can be attributed to the low power loss of the guided mode resonance in the dielectric layer. The simulation results are analyzed with coupled mode theory. Interestingly, on the premise of maintaining the absorbance at a level greater than 0.95, the absorption frequency can be tuned from 1.381 to 1.395 THz by varying the Fermi energy of BDSs from 50 to 80 meV. Our results may also provide potential applications in optical filter and bio-chemical sensing.

Microring weight banks present novel opportunities for reconfigurable, high-performance analog signal processing in photonics. Controlling microring filter response is a challenge due to fabrication variations and thermal sensitivity. Prior work showed continuous weight control of multiple wavelength-division multiplexed signals in a bank of microrings based on calibration and feedforward control. Other prior work has shown resonance locking based on feedback control by monitoring photoabsorption-induced changes in resistance across in-ring photoconductive heaters. In this work, we demonstrate continuous, multi-channel control of a microring weight bank with an effective 5.1 bits of accuracy on 2Gbps signals. Unlike resonance locking, the approach relies on an estimate of filter transmission versus photo-induced resistance changes. We introduce an estimate still capable of providing 4.2 bits of accuracy without any direct transmission measurements. Furthermore, we present a detailed characterization of this response for different values of carrier wavelength offset and power.…

We propose a broadband tunable metamaterial absorber with near-unity absorption in the terahertz regime based on a target-patterned graphene sheet. Due to gradient diameter modulation of the graphene sheet and circular symmetry of the unit cell, broadband and polarization-independent properties are achieved in the absorber. A full-wave numerical simulation is performed, and the results show that the absorber's bandwidth of 90% terahertz absorption reaches 1.57 THz with a central frequency of 1.83 THz under normal incidence. At oblique incidence, the broadband absorption of the absorber remains more than 75% over a wide incidence angles up to 60°for the transverse electric (TE) mode and 75°for the transverse magnetic (TM) mode. Furthermore, tunable property is implemented and the peak absorption of the absorber can be tuned from 19% to near 100% by changing the Fermi energy of the graphene sheet from 0 to 0.9 eV via electrostatic doping. The absorber is scalable to the infrared and visible frequencies, which could be used as tunable sensors, filters and photovoltaic devices.

In this paper, a transparent metamaterial absorber (MA) loaded with water substrate is presented, which can simultaneously achieve enhanced broadband microwave absorption and tunable infrared radiation. As a proof, the indium tin oxide (ITO) films are first introduced here as a frequency selective surface (FSS) on the top layer and reflective backplane on the ground layer. Next the distilled water combined with the polymethyl methacrylate (PMMA) substrate is employed as a hybrid substrate in the middle. Simulation and experimental measurements show that the transparent water-substrate MA can achieve broadband microwave absorption with efficiency over 90% in the frequency band of 6.4-23.7GHz, and the proposed hybrid substrate has almost no influence on its original transmittance. Moreover, owing to the available water circulation system, the infrared radiation of the proposed MA is also demonstrated to be controlled by the temperature of the injected water. Based on its multifunction and high performance, it is expected that the proposed design may find potential applications, such…

Image reconstruction under multiple light scattering is crucial in a number of applications such as diffraction tomography. The reconstruction problem is often formulated as a nonconvex optimization, where a nonlinear measurement model is used to account for multiple scattering and regularization is used to enforce prior constraints on the object. In this paper, we propose a powerful alternative to this optimization-based view of image reconstruction by designing and training a deep convolutional neural network that can invert multiple scattered measurements to produce a high-quality image of the refractive index. Our results on both simulated and experimental datasets show that the proposed approach is substantially faster and achieves higher imaging quality compared to the state-of-the-art methods based on optimization.

A broadband tunable metamaterial graphene absorber is investigated in this paper. The unit cell of the proposed metamaterial graphene absorber is composed of four patch resonators. By tuning the chemical potential of graphene and the geometric size of each patch, the simulated total reflectivity is less than -10 dB from 22.02 to 36.61 THz and with the total thickness of 0.76 um (only 0.09λ at the lowest frequency). The analysis of the surface current, magnetic field and power flow distributions has been performed to better understand the absorption mechanism. Moreover, this proposed absorber achieves its bandwidth tunable characteristics through a voltage biasing of the graphene's Fremi level. This proposed metamaterial graphene absorber (MGA) could be used as smart absorbers, photovoltaic devices and tunable sensors.

The topological phases in materials have been studied in recent decades for their unique boundary states and transport properties. Photonic systems with band structures embrace the topological phases closely, where they not only provide platforms to testify the topological band theory, but also shed light on designing novel optical devices. In this review, we present exciting developments, supported by brief descriptions of prominent milestones of topological phases in photonic systems in recent years. These studies may sustain further developments of optical devices and offer novel methods for light manipulations.

Directly grown III-V quantum dot (QD) laser on on-axis Si (001) is a good candidate for achieving monolithically integrated Si photonics light source. Nowadays, laser structures containing high quality InAs / GaAs QD are generally grown by molecular beam epitaxy (MBE). However, the buffer layer between the on-axis Si (001) substrate and the laser structure are usually grown by metal-organic chemical vapor deposition (MOCVD). In this paper, we demonstrate all MBE grown high-quality InAs/GaAs QD lasers on on-axis Si (001) substrates without using patterning and intermediate layers of foreign material.

A reservoir computing (RC) system based on a semiconductor laser (SL) with double optical feedback and optical injection is proposed, and the prediction performance of such a system is numerically investigated via Santa Fe Time-Series Prediction task. The simulation results indicate that the RC system can yield a good prediction performance. Through optimizing some relevant operating parameters, ultra-fast information processing rates up to Gb/s level can be realized for the prediction error is below 3%.

A new integral-imaging-based light field augmented-reality display is proposed and implemented for the first time, to our best knowledge, to achieve a wide see-through view and high image quality over a large depth range. By using custom-designed freeform optics and incorporating a tunable lens and an aperture array, we demonstrated a compact design of a light field head-mounted-display that offers a true 3D display view of 30° by 18°, maintains a spatial resolution of 3 arc minutes across a depth range of over 3 diopters, and provides a see-through field of view of 65° by 40°.

Continuous-variable quantum key distribution (CVQKD) with a real local oscillator (LO) has been extensively studied recently due to its security and simplicity. In this paper, we propose a novel implementation of a high-key-rate CVQKD with a real LO. Particularly, with the help of the simultaneously generated reference pulse, the phase drift of the signal is tracked in real time and then compensated. By utilizing the time and polarization multiplexing techniques to isolate the reference pulse and controlling the intensity of it, not only the contamination from it is suppressed, but also a high accuracy of the phase compensation can be guaranteed. Besides, we employ homodyne detection on the signal to ensure the high quantum efficiency and heterodyne detection on the reference pulse to acquire the complete phase information of it. In order to suppress the excess noise, a theoretical noise model for our scheme is established. According to this model, the impact of the modulation variance and the intensity of the reference pulse are both analysed theoretically and then optimized…

Recent research on parity-time- (𝒫𝒯-) symmetric optical structures have exhibited great potential for achieving distinctive optical behaviour which is unattainable with ordinary optical systems. Here we propose a 𝒫𝒯-symmetric cavity-magnon system consisting of active cavity mode strongly interacting with magnon to study magnon-induced transparency (MIT) and amplification (MIA) by exploiting recent microwave-cavity-engineered ferromagnetic magnons. We find that (i) due to the gain-induced enhancement of coherent coupling between the cavity field and the magnon, the transmitted probe power is remarkably enhanced about four orders of magnitude and the bandwidth also becomes much narrower, compared to passive cavity system. (ii) More importantly, the light transmission can be well controlled by adjusting the applied magnetic field without changing other parameters, and a Lorentzian-like spectra can be established between the transmitted probe power and the external magnetic field, which provides an additional degree of freedom to realize the coherent manipulation of optical…

The angular resolution of current near-eye display devices is still far below human-eye acuity. How to achieve retina-level resolution while keeping wide field-of-view (FOV) remains a great challenge. In this work, we demonstrate a multi-resolution foveated display with two display panels and an optical combiner. The first display panel provides a wide FOV but relatively low resolution for the surrounding region, while the second one offers an ultra-high resolution for the central fovea region, by an optical minifying system which enhances the effective resolution by 5 ×. In addition, a switchable Pancharatnam-Berry phase deflector is employed to shift the high-resolution region. The proposed design effectively reduces the pixelation and screen-door effect in near-eye displays.

We present a spatio-temporal analysis of cell membrane fluctuations to distinguish healthy patients from patients with sickle cell disease. A video hologram containing either healthy red blood cells (h-RBCs) or sickle cell disease red blood cells (SCD-RBCs) was recorded using a low-cost, compact, 3D printed shearing interferometer. Reconstructions were created for each hologram frame (time steps), forming a spatio-temporal data cube. Features were extracted by computing the standard deviations and the mean of the height fluctuations over time and for every location on the cell membrane, resulting in two-dimensional standard deviation and mean maps, followed by taking the standard deviations of these maps. The optical flow algorithm was used to estimate the apparent motion fields between subsequent frames (reconstructions). The standard deviation of the magnitude of the optical flow vectors across all frames was then computed. In addition, seven morphological cell (spatial) features based on optical path length were extracted from the cells to further improve the classification…

Long-range shape measurement with high accuracy is needed for precision manufacturing of large-scale parts such as turbines, compressors, and trains. We have developed a high-accuracy ranging system based on frequency-modulated continuous-wave (FMCW) technology. Our system has two unique features. First, it achieves high-accuracy range measurement by directly modulating a low-cost vertical-cavity surface-emitting laser (VCSEL) at high sweep rates. The nonlinearity of the optical frequency sweep is compensated for by resampling through a reference interferometer. Second, an optical fiber with multiple fiber Bragg grating (FBG) structures is used for distance calibration. Ranging accuracy better than 10 μm is achieved at 2 m distance. Three-dimensional (3D) imaging of 10-cubic-meter volume has been obtained by combining the FMCW ranging with a galvanometer scanner.

Head-mounted display (HMD) has been widely used in many fields, and most existing HMDs are complex and typically non-aesthetically pleasing. In this paper, a novel compact, lightweight and wearable off-axis HMD with freeform surface is reported. It is challenging to achieve large field of view (FOV) and maintain compact structure simultaneously for this type system. In this design, the compact off-axis HMD consists of a tilted ellipsoid combiner and a four pieces relay lenses. It offers a diagonal FOV of 30°, and an exit pupil diameter of 7 mm. No diffractive surfaces are used, thus avoiding the effect of stray light and ghost image in previous designs. The x-y polynomial freeform surface is adopted in the relay lens for improving the image quality and minimizing the structure size. Analytical expressions to determine the initial structure of HMD has been given, while structure constrains, optimization strategy and tolerance analysis are also described in details. The optical system is easy to manufacture by ordinary method which is beneficial for mass production. Further, a…

We present a reconfigurable, dynamic beam steering holographic metasurface aperture to synthesize a microwave camera at K-band frequencies. The aperture consists of a 1D printed microstrip transmission line with the front surface patterned into an array of slot-shaped subwavelength metamaterial elements (or meta-elements) dynamically tuned between "ON" and "OFF" states using PIN diodes. The proposed aperture synthesizes a desired radiation pattern by converting the waveguide-mode to a free space radiation by means of a binary modulation scheme. This is achieved in a holographic manner; by interacting the waveguide-mode (reference-wave) with the metasurface layer (hologram layer). It is shown by means of full-wave simulations that using the developed metasurface aperture, the radiated wavefronts can be engineered in an all-electronic manner without the need for complex phase-shifting circuits or mechanical scanning apparatus. Using the dynamic beam steering capability of the developed antenna, we synthesize a Mills-Cross composite aperture, forming a single-frequency all-electronic…

We propose and demonstrate a scalable mode division multiplexing scheme based on orbital angular momentum modes in ring core fibers. In this scheme, the high-order mode groups of a ring core fiber are sufficiently de-coupled by the large differential effective refractive index so that multiple-input multiple-output (MIMO) equalization is only used for crosstalk equalization within each mode group. We design and fabricate a graded-index ring core fiber that supports 5 mode groups with low inter-mode-group coupling, small intra-mode-group differential group delay, and small group velocity dispersion slope over the C-band for the high-order mode groups. We implement a two-dimensional wavelength- and mode-division multiplexed transmission experiment involving 10 wavelengths and 2 mode groups each with 4 OAM modes, transmitting 32 GBaud Nyquist QPSK signals over all 80 channels. An aggregate capacity of 5.12 Tb/s and an overall spectral efficiency of 9 bit/s/Hz over 10 km are realized, only using modular 4x4 MIMO processing with 15 taps to recover signals from the intra-mode-group mode…

. The orientation and amplitude of the vector bending can be reconstructed using measured Bragg wavelength shifts of any two off-diagonal outer-core FBGs. So, the six outer-core FBGs have 12 combinations for bend reconstruction, which can be averaged across multiple reconstructions to develop an accurate two-dimensional vector bending sensor. The average relative error was lower than 4.5% for reconstructed amplitude and less than 2.8% for reconstructed orientation angle θ. Moreover, the seven-core FBGs offer several advantages such as a compact structure, fabrication flexibility, and the temperature compensating ability of central-core FBG.

The anisotropic plasmons properties of black phosphorus allow for realizing direction-dependent plasmonics devices. Here, we theoretically investigated the hybridization between graphene surface plasmons (GSP) and anisotropic black phosphorus localized surface plasmons (BPLSP) in the strong coupling regime. By dynamically adjusting the Fermi level of graphene, we show that the strong coherent GSP-BPLSP coupling can be achieved in both armchair and zigzag directions, which is attributed to the anisotropic black phosphorus with different in-plane effective electron masses along the two crystal axes. The strong coupling is quantitatively described by calculating the dispersion of the hybrid modes using a coupled oscillator model. Mode splitting energy of 26.5 meV and 19 meV are determined for the GSP-BPLSP hybridization along armchair and zigzag direction, respectively. We also find that the coupling strength can be strongly affected by the distance between graphene sheet and black phosphorus nanoribbons. Our work may provide the building blocks to construct future highly compact…

Distributed vibration sensing in optical fibers opened entirely new opportunities and penetrated various sectors from security to seismic monitoring. Here, we demonstrate a most simple and robust approach for dynamic strain measurement using wavelength-scanning coherent optical time domain reflectometry (C-OTDR). Our method is based on laser current modulation and Rayleigh backscatter shift correlation. As opposed to common single-wavelength phase demodulation techniques, also the algebraic sign of the strain change is retrieved. This is crucial for the intended applications in structural health monitoring and modal analysis. A linear strain response down to 47.5 pε and strain noise of 100 pε/√Hz is demonstrated for repetition rates in the kHz range. A field application of a vibrating bridge is presented. Our approach provides a cost-effective high-resolution method for structural vibration analysis and geophysical applications.

A highly sensitive refractive index sensor based on surface plasmon resonance in a side-polished low-index polymer optical fiber is proposed for biosensing. Benefitting from the low refractive index of the fiber core, the sensitivity of the device can reach ~44567 nm/RIU theoretically for aqueous solutions, at the expense of a lowered upper detection limit that is down to ~1.340. The sensor is fabricated by coating 55-nm-thick Au-film on the polished surface of a graded-index perfluorinated polymer optical fiber. Results show that the sensor exhibits a sensitivity of ~22779 nm/RIU at 1.335 with a figure of merit of 61.2. When employed for glucose sensing, the sensor presents an averaged sensitivity of 24.50 nm/wt%, or 0.46 nm/mM. This device is expected to have potential applications in cost-effective bio- and chemical-sensing.

Advanced three-dimensional (3D) imaging techniques can acquire high-resolution 3D biomedical and biological data, but available digital display methods show this data in restricted two dimensions. 3D light-field displays optically reconstruct realistic 3D image by carefully tailoring light fields, and a natural and comfortable 3D sense of real objects or scenes is expected. An interactive floating full-parallax 3D light-field display with all depth cues is demonstrated with 3D biomedical and biological data, which are capable of achieving high efficiency and high image quality. A compound lens-array with two pieces of lens in each lens unit is designed and fabricated to suppress the aberrations and increase the viewing angle. The optimally designed holographic functional screen is used to recompose the light distribution from the lens-array. The imaging distortion can be decreased to less than 1.9% from more than 20%. The real time interactive floating full-parallax 3D light-field image with the clear displayed depth of 30 cm can be perceived with the right geometric occlusion and…

III-V coupon, defined on a III-V epitaxial wafer. A second-order grating defined in the silicon device layer with a period of 477 nm and a duty cycle of 75% was used for realizing single mode emission, while an adiabatic taper structure is used for coupling to the silicon waveguide layer. 18 mA threshold current and a maximum single-sided waveguide-coupled output power above 2 mW is obtained at 20°C. Single mode operation around 1550 nm with > 40 dB side mode suppression ratio (SMSR) is realized. This new integration approach allows for the very efficient use of the III-V material and the massively parallel integration of these coupons on a silicon photonic integrated circuit wafer. It also allows for the intimate integration of III-V opto-electronic components based on different epitaxial layer structures.

A subwavelength water metamaterial is proposed and analyzed for ultra-broadband perfect absorption at microwave frequencies. We experimentally demonstrate that this metamaterial shows over 90% absorption within almost the entire frequency band of 12-29.6 GHz. It is also shown that the proposed metamaterial exhibits a good thermal stability with its absorption performance almost unchanged for the temperature range from 0 to 100°C. The study of the angular tolerance of the metamaterial absorber shows its ability of working at wide angles of incidence. Given that the proposed water metamaterial absorber is low-cost and easy for manufacture, we envision it may find numerous applications in electromagnetics such as broadband scattering reduction and electromagnetic energy harvesting.

Scattering often limits the controlled delivery of light in applications such as biomedical imaging, optogenetics, optical trapping, and fiber-optic communication or imaging. Such scattering can be controlled by appropriately shaping the light wavefront entering the material. Here, we develop a machine-learning approach for light control. Using pairs of binary intensity patterns and intensity measurements we train neural networks (NNs) to provide the wavefront corrections necessary to shape the beam after the scatterer. Additionally, we demonstrate that NNs can be used to find a functional relationship between transmitted and reflected speckle patterns. Establishing the validity of this relationship, we focus and scan in transmission through opaque media using reflected light. Our approach shows the versatility of NNs for light shaping, for efficiently and flexibly correcting for scattering, and in particular the feasibility of transmission control based on reflected light.

, which are consistent with the numerical simulations.

The constituent elements of metasurfaces may be designed with explicit polarization dependence, making metasurfaces a fascinating platform for new polarization optics. In this work we show that a metasurface grating can be designed to produce arbitrarily specified polarization states on a set of defined diffraction orders given that the polarization of the incident beam is known. We also demonstrate that, when used in a reverse configuration, the same grating may be used as a parallel snapshot polarimeter, requiring a minimum of bulk polarization optics. We demonstrate its use in measuring partially polarized light, and show that it performs favorably in comparison to a commercial polarimeter. This work is of consequence in any application requiring lightweight, compact, and low-cost polarization optics, polarimetry, or polarization imaging.

We demonstrate a 100 kHz optical parametric chirped-pulse amplifier delivering under 4-cycle (38 fs) pulses at ~3.2 µm with an average power of 15.2 W with a pulse-to-pulse energy stability <0.7% rms and a single-shot CEP noise of 65 mrad RMS over 8h. This source is continuously monitored, by using a fast 100 kHz data acquisition device, and presents an extreme stability, in the short and long terms.

Extracting precise target characteristics from microwave image is needed and calls for high-resolution microwave imaging radar systems. In this paper, a Ka-band ultra-wideband microwave photonic (MWP) imaging radar is developed and experimentally demonstrated. In the transmitter, continuous ultra-wideband linear frequency modulation (LFM) wave is generated based on optical frequency sextupling technique. In the receiver, a combination of optical frequency mixer with fiber delay lines and electric analog-to-digital converter (ADC) is capable of receiving target echoes and imaging targets with different distances. The maximum instantaneous bandwidth of the transmitted waveform is measured to be 10.02 GHz and corresponding range resolution is calibrated to be 1.68 cm. Out-field tests with demonstrator working at synthetic aperture radar (SAR) or inverse synthetic aperture radar (ISAR) mode are carried out. Different targets such as an unmanned aerial vehicle (UAV), airliner and Leifeng pagoda are imaged. Based on corresponding high-resolution microwave images, quantitative information…

and RMSE values ranging from 0.639 to 0.810 and 4.08 m to 4.56 m respectively). This means our new proposed approach is appropriate for retrieving vegetation canopy height from micro-pulse photon-counting LiDAR data.

platforms may open the route towards the implementation of mid-IR photonic integrated circuits with low-loss beyond the Si multi-phonon absorption band onset, hence truly exploiting the full Ge transparency window up to λ ~15 µm.

We numerically demonstrate a tunable broadband terahertz absorber with near-unity absorption by using multilayer graphene ribbons sandwiched in a plasmonic integrated structure. By stacking slightly different widths of graphene ribbons in a sandwiched configuration, the absorption bandwidth can be increased because of the different resonant modes closely positioned together. The absorption spectrum's center frequency can be manipulated by varying the graphene's chemical potential, which provides a flexible way to design and optimize absorption property after fabrication. Furthermore, the structure can tolerate a wide range of incident angles, while the improved structure with graphene nanoparticles also shows polarization-independent feature. In this routine, stacking more graphene ribbons or particles with well-designed dimensions can further increase the bandwidth, as long as the metamaterial dimension satisfies the sub-wavelength condition. Therefore, our research provides an important theoretical guide for designing various graphene-based tunable broadband absorbers at…

. Our numerical simulations demonstrate that the proposed system can provide better BER performance under strong atmospheric turbulence and conditions when the classification ability of CNN is limited.

Quantum communication has been successfully implemented in optical fibres and through free-space. Fibre systems, though capable of fast key and low error rates, are impractical in communicating with destinations without an established fibre link. Free-space quantum channels can overcome such limitations and reach long distances with the advent of satellite-to-ground links. However, turbulence, resulting from local fluctuations in refractive index, becomes a major challenge by adding errors and losses. Recently, an interest in investigating the possibility of underwater quantum channels has arisen. Here, we investigate the effect of turbulence on an underwater quantum channel using twisted photons in outdoor conditions. We study the effect of turbulence on transmitted error rates, and compare different quantum cryptographic protocols in an underwater quantum channel, showing the feasibility of high-dimensional encoding schemes. Our work may open the way for secure high-dimensional quantum communication between submersibles, and provides important input for potential…