The 100 most-cited articles in Optics Express, 2017

Twenty-five years ago Allen, Beijersbergen, Spreeuw, and Woerdman published their seminal paper establishing that light beams with helical phase-fronts carried an orbital angular momentum. Previously orbital angular momentum had been associated only with high-order atomic/molecular transitions and hence considered to be a rare occurrence. The realization that every photon in a laser beam could carry an orbital angular momentum that was in excess of the angular momentum associated with photon spin has led both to new understandings of optical effects and various applications. These applications range from optical manipulation, imaging and quantum optics, to optical communications. This brief review will examine some of the research in the field to date and consider what future directions might hold.

Single-pixel imaging which employs active illumination to acquire spatial information is an innovative imaging scheme and has received increasing attentions in recent years. It is applicable to imaging at non-visible wavelengths and imaging under low light conditions. However, single-pixel imaging has once encountered problems of low reconstruction quality and long data-acquisition time. Hadamard single-pixel imaging (HSI) and Fourier single-pixel imaging (FSI) are two representative deterministic model based techniques. Both techniques are able to achieve high-quality and efficient imaging, remarkably improving the applicability of single-pixel imaging scheme. In this paper, we compare the performances of HSI and FSI with theoretical analysis and experiments. The results show that FSI is more efficient than HSI while HSI is more noise-robust than FSI. Our work may provide a guideline for researchers to choose suitable single-pixel imaging technique for their applications.

Attosecond metrology has so far largely remained limited to titanium:sapphire lasers combined with an active stabilization of the carrier-envelope phase (CEP). These sources limit the achievable photon energy to ∼100 eV which is too low to access X-ray absorption edges of most second- and third-row elements which are central to chemistry, biology and material science. Therefore, intense efforts are underway to extend attosecond metrology to the soft-X-ray (SXR) domain using mid-infrared (mid-IR) drivers. Here, we introduce and experimentally demonstrate a method that solves the long-standing problem of the complete temporal characterization of ultra-broadband (≫10 eV) attosecond pulses. We generalize the recently proposed Volkov-transform generalized projection algorithm (VTGPA) to the case of multiple overlapping photoelectron spectra and demonstrate its application to isolated attosecond pulses. This new approach overcomes all key limitations of previous attosecond-pulse reconstruction methods, in particular the central-momentum approximation (CMA), and it incorporates the…

We report a comprehensive experimental study of optical and electrical properties of thin polycrystalline gold films in a wide range of film thicknesses (from 20 to 200 nm). Our experimental results are supported by theoretical calculations based on the measured morphology of the fabricated gold films. We demonstrate that the dielectric function of the metal is determined by its structural morphology. Although the fabrication process can be absolutely the same for different films, the dielectric function can strongly depend on the film thickness. Our studies show that the imaginary part of the dielectric function of gold, which is responsible for optical losses, rapidly increases as the film thickness decreases for thicknesses below 80 nm. At the same time, we do not observe a noticeable dependence of optical constants on the film thickness for thicker samples. These findings establish design rules for thin-film plasmonic and nanophotonic devices.

Depth and intensity profiling of targets at a range of up to 10 km is demonstrated using time-of-flight time-correlated single-photon counting technique. The system comprised a pulsed laser source at 1550 nm wavelength, a monostatic scanning transceiver and a single-element InGaAs/InP single-photon avalanche diode (SPAD) detector. High-resolution three-dimensional images of various targets acquired over ranges between 800 metres and 10.5 km demonstrate long-range depth and intensity profiling, feature extraction and the potential for target recognition. Using a total variation restoration optimization algorithm, the acquisition time necessary for each pixel could be reduced by at least a factor of ten compared to a pixel-wise image processing approach. Kilometer range depth profiles are reconstructed with average signal returns of less than one photon per pixel.

Metamaterial absorbers consisting of metal, metal-dielectric, or dielectric materials have been realized across much of the electromagnetic spectrum and have demonstrated novel properties and applications. However, most absorbers utilize metals and thus are limited in applicability due to their low melting point, high Ohmic loss and high thermal conductivity. Other approaches rely on large dielectric structures and / or a supporting dielectric substrate as a loss mechanism, thereby realizing large absorption volumes. Here we present a terahertz (THz) all dielectric metasurface absorber based on hybrid dielectric waveguide resonances. We tune the metasurface geometry in order to overlap electric and magnetic dipole resonances at the same frequency, thus achieving an experimental absorption of 97.5%. A simulated dielectric metasurface achieves a total absorption coefficient enhancement factor of FT=140, with a small absorption volume. Our experimental results are well described by theory and simulations and not limited to the THz range, but may be extended to microwave, infrared and…

For a distributed fiber-optic vibration sensor (DFVS), the vibration signal extracted from the phase of backscattering has a linear response to the applied vibration, and is more attractive than that from the intensity term. However, the large phase noise at a random weak-fading-point seriously limits the sensor's credibility. In this paper, a novel phase-detection DFVS is developed, which effectively eliminates the weak-fading-point. The relationship between phase noise and the intensity of backscattering is analyzed, and the inner-pulse frequency-division method and rotated-vector-sum method are introduced to effectively suppress phase noise. In experiments, two simultaneous vibrations along the 35-kilometer-long fiber are clearly detected by phase detection with the signal-to-noise ratio (SNR) over 26 dB. The spatial resolution approaches 5 m and the vibration response bandwidth is 1.25 kHz.

The on-chip generation of large and complex optical quantum states will enable low-cost and accessible advances for quantum technologies, such as secure communications and quantum computation. Integrated frequency combs are on-chip light sources with a broad spectrum of evenly-spaced frequency modes, commonly generated by four-wave mixing in optically-excited nonlinear micro-cavities, whose recent use for quantum state generation has provided a solution for scalable and multi-mode quantum light sources. Pulsed quantum frequency combs are of particular interest, since they allow the generation of single-frequency-mode photons, required for scaling state complexity towards, e.g., multi-photon states, and for quantum information applications. However, generation schemes for such pulsed combs have, to date, relied on micro-cavity excitation via lasers external to the sources, being neither versatile nor power-efficient, and impractical for scalable realizations of quantum technologies. Here, we introduce an actively-modulated, nested-cavity configuration that exploits the resonance…

We present the analysis of the self-injection locking of a single-frequency laser diode to a high-Q whispering gallery mode (WGM) microresonator with Rayleigh backscattering. Simple analytical formulas for the width of the locking band and resulting laser linewidth are derived.

RIU can be obtained. Our analysis shows that the PCF-SPR sensor is suitable for mid-infrared detection.

A photonics-based radar with generation and de-chirp processing of broadband linear frequency modulated continuous-wave (LFMCW) signal in optical domain is proposed for high-resolution and real-time inverse synthetic aperture radar (ISAR) imaging. In the proposed system, a broadband LFMCW signal is generated by a photonic frequency quadrupler based on a single integrated electro-optical modulator, and the echoes reflected from the targets are de-chirped to a low frequency signal by a microwave photonic frequency mixer. The proposed radar can operate at a high frequency with a large bandwidth, and thus achieve an ultra-high range resolution for ISAR imaging. Thanks to the wideband photonic de-chirp technique, the radar receiver could apply low-speed analog-to-digital conversion and mature digital signal processing, which makes real-time ISAR imaging possible. A K-band photonics-based radar with an instantaneous bandwidth of 8 GHz (18-26 GHz) is established and its performance for ISAR imaging is experimentally investigated. Results show that a recorded two-dimensional imaging…

Integrated thin-film lithium niobate platform has recently emerged as a promising candidate for next-generation, high-efficiency wavelength conversion systems that allow dense packaging and mass-production. Here we demonstrate efficient, phase-matched second harmonic generation in lithographically-defined thin-film lithium niobate waveguides with sub-micron dimensions. Both modal phase matching in fixed-width waveguides and quasi-phase matching in periodically grooved waveguides are theoretically proposed and experimentally demonstrated. Our low-loss (~ 3.0 dB/cm) nanowaveguides possess normalized conversion efficiencies as high as 41% W-1cm-2.

We demonstrate a camera which can image methane gas at video rates, using only a single-pixel detector and structured illumination. The light source is an infrared laser diode operating at 1.651μm tuned to an absorption line of methane gas. The light is structured using an addressable micromirror array to pattern the laser output with a sequence of Hadamard masks. The resulting backscattered light is recorded using a single-pixel InGaAs detector which provides a measure of the correlation between the projected patterns and the gas distribution in the scene. Knowledge of this correlation and the patterns allows an image to be reconstructed of the gas in the scene. For the application of locating gas leaks the frame rate of the camera is of primary importance, which in this case is inversely proportional to the square of the linear resolution. Here we demonstrate gas imaging at ~25 fps while using 256 mask patterns (corresponding to an image resolution of 16×16). To aid the task of locating the source of the gas emission, we overlay an upsampled and smoothed image of the…

SA with large modulation depth is a more promising photonic device in mode-locked fiber lasers with the wide spectrum and ultrashort pulse duration.

The polarization conversion of electromagnetic (EM) waves, especially linear-to-circular (LTC) polarization conversion, is of great significance in practical applications. In this study, we propose an ultra-wideband high-efficiency reflective LTC polarization converter based on a metasurface in the terahertz regime. It consists of periodic unit cells, each cell of which is formed by a double split resonant square ring, dielectric layer, and fully reflective gold mirror. In the frequency range of 0.60 - 1.41 THz, the magnitudes of the reflection coefficients reach approximately 0.7, and the phase difference between the two orthogonal electric field components of the reflected wave is close to 90° or -270°. The results indicate that the relative bandwidth reaches 80% and the efficiency is greater than 88%, thus, ultra-wideband high-efficiency LTC polarization conversion has been realized. Finally, the physical mechanism of the polarization conversion is revealed. This converter has potential applications in antenna design, EM measurement, and stealth technology.

The refractive index sensing characteristics of the side-polished photonic crystal fiber (PCF) surface plasmon resonance (SPR) sensor are detailed investigated in this paper. We used the finite element method (FEM) to study the influences of the side-polished depth, air hole size, lattice constant, and the refractive index (RI) of the PCF material on sensing performance. The simulation results show that the side-polished depth, air hole size, lattice pitch have significant influence on the coupling strength between core mode and surface plasmon polaritons (SPPs), but have little influence on sensitivity; the coupling strength and sensitivity will significant increase with the decrease of RI of the PCF material. The sensitivity of the D-shaped PCF sensor is obtained to be as high as 21700 nm/RIU in the refractive index environment of 1.33-1.34, when the RI of the PCF material is controlled at 1.36. It revealed a new method of making ultra-high sensitivity SPR fiber sensor. Then we experimental demonstrated a SPR refractive sensor based on the side-polished single mode PCF and…

An intelligent constellation diagram analyzer is proposed to implement both modulation format recognition (MFR) and optical signal-to-noise rate (OSNR) estimation by using convolution neural network (CNN)-based deep learning technique. With the ability of feature extraction and self-learning, CNN can process constellation diagram in its raw data form (i.e., pixel points of an image) from the perspective of image processing, without manual intervention nor data statistics. The constellation diagram images of six widely-used modulation formats over a wide OSNR range (15~30 dB and 20~35 dB) are obtained from a constellation diagram generation module in oscilloscope. Both simulation and experiment are conducted. Compared with other 4 traditional machine learning algorithms, CNN achieves the better accuracies and is obviously superior to other methods at the cost of O(n) computation complexity and less than 0.5 s testing time. For OSNR estimation, the high accuracies are obtained at epochs of 200 (95% for 64QAM, and over 99% for other five formats); for MFR, 100% accuracies are achieved…

We demonstrate that a broadband terahertz absorber with near-unity absorption can be realized using a net-shaped periodically sinusoidally-patterned graphene sheet, placed on a dielectric spacer supported on a metallic reflecting plate. Because of the gradient width modulation of the unit graphene sheet, continuous plasmon resonances can be excited, and therefore broadband terahertz absorption can be achieved. The results show that the absorber's normalized bandwidth of 90% terahertz absorbance is over 65% under normal incidence for both TE and TM polarizations when the graphene chemical potential is set as 0.7 eV. And the broadband absorption is insensitive to the incident angles and the polarizations. The peak absorbance remains more than 70% over a wide range of the incident angles up to 60° for both polarizations. Furthermore, this absorber also has the advantage of flexible tunability via electrostatic doping of graphene sheet, which peak absorbance can be continuously tuned from 14% to 100% by controlling the chemical potential from 0 eV to 0.8 eV. The design scheme is…

We experimentally demonstrate the use of deep neural networks (DNNs) in combination with signals' amplitude histograms (AHs) for simultaneous optical signal-to-noise ratio (OSNR) monitoring and modulation format identification (MFI) in digital coherent receivers. The proposed technique automatically extracts OSNR and modulation format dependent features of AHs, obtained after constant modulus algorithm (CMA) equalization, and exploits them for the joint estimation of these parameters. Experimental results for 112 Gbps polarization-multiplexed (PM) quadrature phase-shift keying (QPSK), 112 Gbps PM 16 quadrature amplitude modulation (16-QAM), and 240 Gbps PM 64-QAM signals demonstrate OSNR monitoring with mean estimation errors of 1.2 dB, 0.4 dB, and 1 dB, respectively. Similarly, the results for MFI show 100% identification accuracy for all three modulation formats. The proposed technique applies deep machine learning algorithms inside standard digital coherent receiver and does not require any additional hardware. Therefore, it is attractive for cost-effective multi-parameter…

Photonic crystal nanocavities that simultaneously possess small modal volumes and high quality (Q) factors have opened up novel research areas in photonics during this decade. Here, we present an important key for the increase of Q factors to ranges beyond ten million. A systematic investigation on photon lifetimes of air-bridge-type heterostructure nanocavities fabricated from silicon on insulator (SOI) substrates indicated the importance of cleaning the bottom side (buried oxide side) of the nanaocavites. Repeated thermal oxidation and an oxide removal process applied after the removal of the buried oxide layer underneath the nanocavities realized an experimental Q factor greater than eleven million, which is the highest experimental Q ever recorded. The results provide important information not only for Si PC nanocavities but also for general Si nanophotonic devices and photonic electronic convergence systems.

We propose a fully automatic technique to obtain aberration free quantitative phase imaging in digital holographic microscopy (DHM) based on deep learning. The traditional DHM solves the phase aberration compensation problem by manually detecting the background for quantitative measurement. This would be a drawback in real time implementation and for dynamic processes such as cell migration phenomena. A recent automatic aberration compensation approach using principle component analysis (PCA) in DHM avoids human intervention regardless of the cells' motion. However, it corrects spherical/elliptical aberration only and disregards the higher order aberrations. Traditional image segmentation techniques can be employed to spatially detect cell locations. Ideally, automatic image segmentation techniques make real time measurement possible. However, existing automatic unsupervised segmentation techniques have poor performance when applied to DHM phase images because of aberrations and speckle noise. In this paper, we propose a novel method that combines a supervised deep learning…

This work develops an enhanced Monte Carlo (MC) simulation methodology to predict the impacts of layout-dependent correlated manufacturing variations on the performance of photonics integrated circuits (PICs). First, to enable such performance prediction, we demonstrate a simple method with sub-nanometer accuracy to characterize photonics manufacturing variations, where the width and height for a fabricated waveguide can be extracted from the spectral response of a racetrack resonator. By measuring the spectral responses for a large number of identical resonators spread over a wafer, statistical results for the variations of waveguide width and height can be obtained. Second, we develop models for the layout-dependent enhanced MC simulation. Our models use netlist extraction to transfer physical layouts into circuit simulators. Spatially correlated physical variations across the PICs are simulated on a discrete grid and are mapped to each circuit component, so that the performance for each component can be updated according to its obtained variations, and therefore, circuit…

Vortex beams are characterized by a helical wavefront and a phase singularity point on the propagation axis that results in a doughnut-like intensity profile. These beams carry orbital angular momentum proportional to the number of intertwined helices constituting the wavefront. Vortex beams have many applications in optics, such as optical trapping, quantum optics and microscopy. Although beams with such characteristics can be generated holographically, spin-to-orbital angular momentum conversion has attracted considerable interest as a tool to create vortex beams. In this process, the geometrical phase is exploited to create helical beams whose handedness is determined by the circular polarization (left/right) of the incident light, that is by its spin. Here we demonstrate high-efficiency Spin-to-Orbital angular momentum-Converters (SOCs) at visible wavelengths based on dielectric metasurfaces. With these SOCs we generate vortex beams with high and fractional topological charge and show for the first time the simultaneous generation of collinear helical beams with different and…

. In addition, when the data rate is up to 1 Gbps, the UOWC distance is predicted to be ~62.7 m for our proposed UOWC system. The achievements we make are suitable for applications requiring high-speed long-distance real-time UOWC.

We report the experimental demonstration of a two-dimensional (2D) metasurface with ordered rotation of elements and show that it can be used to control the symmetry of light-matter interaction. A 2D lens is demonstrated in the visible region by transforming the rotational symmetry associated with the off-axis incident light to the translational symmetry, allowing an extraordinarily large field of view (FOV) as well as optical Fourier transformation. Furthermore, such a planar lens has a long focal depth, with polarization selectivity and subwavelength resolution. The scheme presented here may provide many new perspectives on the design of novel 2D optical devices.

. The measured bandwidths for an ER of >20dB, >25dB and >30dB are ~135nm, ~95nm and ~70nm, respectively, while the measured EL is <1dB and <0.5dB in a bandwidth of ~140nm and ~85nm, respectively. The fabrication tolerance of the core-width variation is as large as ± 40nm, which makes the fabrication very easy.

We investigate the average power scaling of two diode-pumped Yb-doped fiber amplifiers emitting a diffraction-limited beam. The first fiber under investigation with a core diameter of 30 µm was able to amplify a 10 W narrow linewidth seed laser up to 2.8 kW average output power before the onset of transverse mode instabilities (TMI). A further power scaling was achieved using a second fiber with a smaller core size (23µm), which allowed for a narrow linewidth output power of 3.5 kW limited by stimulated Brillouin scattering (SBS). We mitigated SBS using a spectral broadening mechanism, which allowed us to further increase the output power to 4.3 kW only limited by the available pump power. Up to this power level, a high slope efficiency of 90% with diffraction-limited beam quality and without any sign of TMI or stimulated Raman scattering for a spectral dynamic range of higher than -80 dB was obtained.

Photonic implementations of reservoir computing (RC) have been receiving considerable attention due to their excellent performance, hardware, and energy efficiency as well as their speed. Here, we study a particularly attractive all-optical system using optical information injection into a semiconductor laser with delayed feedback. We connect its injection locking, consistency, and memory properties to the RC performance in a non-linear prediction task. We find that for partial injection locking we achieve a good combination of consistency and memory. Therefore, we are able to provide a physical basis identifying operational parameters suitable for prediction.

In this paper, we propose a performance monitoring and failure prediction method in optical networks based on machine learning. The primary algorithms of this method are the support vector machine (SVM) and double exponential smoothing (DES). With a focus on risk-aware models in optical networks, the proposed protection plan primarily investigates how to predict the risk of an equipment failure. To the best of our knowledge, this important problem has not yet been fully considered. Experimental results showed that the average prediction accuracy of our method was 95% when predicting the optical equipment failure state. This finding means that our method can forecast an equipment failure risk with high accuracy. Therefore, our proposed DES-SVM method can effectively improve traditional risk-aware models to protect services from possible failures and enhance the optical network stability.

Broadband metamaterial absorber (MA) in the whole visible regime has attracted an enormous amount of attention for its potential applications in thermophotovoltaic cells, thermal emitters, and other optoelectronic devices. Nonetheless, complicated device configuration is still involved in achieving broadband, polarization-independent MA and it results in a cost-ineffective fabrication process. In this paper, a novel MA composed of a periodic array of dielectric cylinder sandwiched by the non-noble metal of nickel (Ni) film is demonstrated. Experimental results show that the proposed MA exhibits strong absorptive behavior independent of polarization in the whole visible regime (400-700 nm). The absorption still remains 80% when the incident angle is 60°. The proposed fabrication method is well compatible with the conventional soft nano-imprinting lithography technique, thus it is economic and scalable for a large-format substrate. These results provide an alternative method for the realization of high-performance visible light absorber and offer new opportunities for potential…

We present a general theory of spontaneous emission at exceptional points (EPs)-exotic degeneracies in non-Hermitian systems. Our theory extends beyond spontaneous emission to any light-matter interaction described by the local density of states (e.g., absorption, thermal emission, and nonlinear frequency conversion). Whereas traditional spontaneous-emission theories imply infinite enhancement factors at EPs, we derive finite bounds on the enhancement, proving maximum enhancement of 4 in passive systems with second-order EPs and significantly larger enhancements (exceeding 400×) in gain-aided and higher-order EP systems. In contrast to non-degenerate resonances, which are typically associated with Lorentzian emission curves in systems with low losses, EPs are associated with non-Lorentzian lineshapes, leading to enhancements that scale nonlinearly with the resonance quality factor. Our theory can be applied to dispersive media, with proper normalization of the resonant modes.

Metasurfaces have promised great possibilities in full control of the electromagnetic wavefront by spatially manipulating the phase characteristics across the interface. Here, we report a scheme to realize broadband backward scattering reduction through diffusion-like microwave reflection by utilizing a flexible indium-tin-oxide (ITO)-based ultrathin coding metasurface (less than 0.1 wavelength thick) with high optical transparence. The diffusion-like scattering is caused by the destructive interference of the scattered far-field electromagnetic wave, which is further attributed to the randomly distributed reflection phases on the metasurface composed of pre-designed meta-atoms arranged with a computer-generated pseudorandom coding sequence. Both simulation and measurement on fabricated prototype sample have been carried out to validate its performance, demonstrating a polarization-independent broadband (nearly from 8 GHz to 15 GHz) 10 dB scattering reduction with good oblique performance. The excellent performances can also be preserved to conformal cases when the flexible…

Phase-shifting profilometry combined with Gray-code patterns projection has been widely used for 3D measurement. In this technique, a phase-shifting algorithm is used to calculate the wrapped phase, and a set of Gray-code binary patterns is used to determine the unwrapped phase. In the real measurement, the captured Gray-code patterns are no longer binary, resulting in phase unwrapping errors at a large number of erroneous pixels. Although this problem has been attended and well resolved by a few methods, it remains challenging when a measured object has step-heights and the captured patterns contain invalid pixels. To effectively remove unwrapping errors and simultaneously preserve step-heights, in this paper, an effective method using an adaptive median filter is proposed. Both simulations and experiments can demonstrate its effectiveness.

Complex vector light fields, classically entangled in polarization and phase, have become ubiquitous in a wide variety of research fields. This has triggered the demonstration of a wide variety of generation techniques. Of particular relevance are those based on computer-controlled devices due to their great flexibility. In particular, spatial light modulators have demonstrated their high capabilities to generate any vector beam, with various spatial profiles and polarization distributions. Here, we put forward a novel technique that exploits the superposition principle in optics to enable the simultaneous generation of many vector beams using a single digital hologram. As proof-of-principle, we demonstrated the simultaneous generation of sixteen vector vortex beams with various polarization distributions and spatial shapes on a single SLM, each with their own spatial shape and polarization distribution.

A microwave photonic synthetic aperture radar (MWP SAR) is developed and experimentally demonstrated. In the transmitter, microwave photonic frequency doubling is used to generate a linearly-frequency-modulated (LFM) radar signal; while in the receiver, photonic stretch processing is employed to receive the reflection signal. The presented MWP SAR operates in Ku band with a bandwidth of 600MHz, and is evaluated through a series of inverse SAR imaging tests both in a microwave anechoic chamber and in a field trial. Its imaging performance verifies that the proposed MWP SAR works perfect and shows the potential of overcoming the conventional radar bandwidth bottleneck.

Nonlinear wavelength conversion is essential for many classical and quantum pho-tonic applications. The underlying second-order nonlinear optical processes, however, generally exhibit limited spectral bandwidths that impact their application potential. Here we use a high-Q X-cut lithium niobate microdisk resonator to demonstrate both second-harmonic generation and spontaneous parametric down-conversion on chip. In particular, our lithium niobate microresonator, with its wide-range cyclic phase matching and rich optical mode structures, is able to achieve ultra-broadband spontaneous parametric down-conversion, with a bandwidth over 400 nm, inferred from recorded spectra of the down-converted photons. The produced biphoton pairs exhibit strong temporal correlation, with a coincidence-to-accidental ratio measured to be 43.1. Our device is promising for integrated quantum photonics where optical frequency could be used as a degree of freedom for signal processing.

sensitivity is achieved and is found to be photon shot noise limited.

Recording digital holograms without wave interference simplifies the optical systems, increases their power efficiency and avoids complicated aligning procedures. We propose and demonstrate a new technique of digital hologram acquisition without two-wave interference. Incoherent light emitted from an object propagates through a random-like coded phase mask and recorded directly without interference by a digital camera. In the training stage of the system, a point spread hologram (PSH) is first recorded by modulating the light diffracted from a point object by the coded phase masks. At least two different masks should be used to record two different intensity distributions at all possible axial locations. The various recorded patterns at every axial location are superposed in the computer to obtain a complex valued PSH library cataloged to its axial location. Following the training stage, an object is placed within the axial boundaries of the PSH library and the light diffracted from the object is once again modulated by the same phase masks. The intensity patterns are recorded and…

We present a high peak and average power optical parametric chirped pulse amplification system driven by diode-pumped Yb:KGW and Nd:YAG lasers running at 1 kHz repetition rate. The advanced architecture of the system allows us to achieve >53 W average power combined with 5.5 TW peak power, along with sub-220 mrad CEP stability and sub-9 fs pulse duration at a center wavelength around 880 nm. Broadband, background-free, passively CEP stabilized seed pulses are produced in a series of cascaded optical parametric amplifiers pumped by the Yb:KGW laser, while a diode-pumped Nd:YAG laser system provides multi-mJ pump pulses for power amplification stages. Excellent stability of output parameters over 16 hours of continuous operation is demonstrated.

We demonstrate a reflective liquid-crystal polarization volume grating with high efficiency for augmented reality displays. The coupling efficiency was measured to be 90% at 650 nm and 50° deflection angle. The angular dependence of reflection band agrees well with Bragg condition, and the transmittance of environment light is high with negligible scattering. The bandwidth can be tailored by controlling the layer periodicity, allowing versatile applications and design freedom not only for augmented realities but also for other photonic devices.

This paper reviews digital signal processing techniques that compensate, mitigate, and exploit fiber nonlinearities in coherent optical fiber transmission systems.

/pSi/PDMS substrate with an aluminum back, an excellent absorption across 0.53-1.05 THz with a wide incident angles for both TE and TM polarizations is achieved. By controlling the voltage across gold electrode and pSi, the chemical potential of graphene can be changed correspondingly. When the chemical potential of graphene varied from 0eV to 0.3eV, the state of the proposed structure can be switched from absorption (>90%) to reflection (>82%) over the whole operation bandwidth. Electric field intensity and surface loss density of the proposed absorber under different chemical potential are given to have a physical insight of the mechanisms. The switchable absorber/reflector can enable a wide application of high performance terahertz devices, such as active camouflage, imaging, modulators and electro-optic switches.

Digital micro-mirror devices (DMDs) have recently emerged as practical spatial light modulators (SLMs) for applications in photonics, primarily due to their modulation rates, which exceed by several orders of magnitude those of the already well-established nematic liquid crystal (LC)-based SLMs. This, however, comes at the expense of limited modulation depth and diffraction efficiency. Here we compare the beam-shaping fidelity of both technologies when applied to light control in complex environments, including an aberrated optical system, a highly scattering layer and a multimode optical fibre. We show that, despite their binary amplitude-only modulation, DMDs are capable of higher beam-shaping fidelity compared to LC-SLMs in all considered regimes.

We analyze optical phased arrays with aperiodic pitch and element-to-element spacing greater than one wavelength at channel counts exceeding hundreds of elements. We optimize the spacing between waveguides for highest side-mode suppression providing grating lobe free steering in full visible space while preserving the narrow beamwidth. Optimum waveguide placement strategies are derived and design guidelines for sparse (> 1.5 λ and > 3 λ average element spacing) optical phased arrays are given. Scaling to larger array areas by means of tiling is considered.

L and the insertion loss rather than the linear EO coefficients. We show record-low voltage-length products of 70 Vµm and 50 Vµm for slot widths in the order of 50 nm for the materials JRD1 and DLD164, respectively. This is because the nonlinear interaction is enhanced in narrow slot and thereby compensates for the reduced EO coefficient. Likewise, it is found that lowest insertion losses are observed for slot widths in the range 60 to 100 nm.

In this paper, a novel sensitivity amplification method for fiber-optic in-line Mach-Zehnder interferometer (MZI) sensors has been proposed and demonstrated. The sensitivity magnification is achieved through a modified Vernier-effect. Two cascaded in-line MZIs based on offset splicing of single mode fiber (SMF) have been used to verify the effect of sensitivity amplification. Vernier-effect is generated due to the small free spectral range (FSR) difference between the cascaded in-line MZIs. Frequency component corresponding to the envelope of the superimposed spectrum is extracted to take Inverse Fast Fourier Transform (IFFT). Thus we can obtain the envelope precisely from the messy superimposed spectrum. Experimental results show that a maximum sensitivity amplification factor of nearly 9 is realized. The proposed sensitivity amplification method is universal for the vast majority of in-line MZIs.

We report measurements of time-frequency entangled photon pairs and heralded single photons at 1550~nm wavelengths generated using a microring resonator pumped optically by a diode laser. Along with a high spectral brightness of pair generation, the conventional metrics used to describe performance, such as Coincidences-to-Accidentals Ratio (CAR), conditional self-correlation [$g^{(2)}(0)$], two-photon energy-time {F}ranson interferometric visibility etc. are shown to reach a high-performance regime not yet achieved by silicon photonics, and attained previously only by crystal, glass and fiber-based pair-generation devices.

We demonstrate nonlinear pulse compression by multi-pass cell spectral broadening (MPCSB) from 860 fs to 115 fs with compressed pulse energy of 7.5 µJ, average power of 300 W and close to diffraction-limited beam quality. The transmission of the compression unit is >90%. The results show that this recently introduced compression scheme for peak powers above the threshold for catastrophic self-focusing can be scaled to smaller pulse energies and can achieve a larger compression factor than previously reported. Good homogeneity of the spectral broadening across the beam profile is verified, which distinguishes MPCSB among other bulk compression schemes.

A hybrid cascaded configuration consisting of a fiber Sagnac interferometer (FSI) and a Fabry-Perot interferometer (FPI) was proposed and experimentally demonstrated to enhance the temperature intensity by the Vernier-effect. The FSI, which consists of a certain length of Panda fiber, is for temperature sensing, while the FPI acts as a filter due to its temperature insensitivity. The two interferometers have almost the same free spectral range, with the spectral envelope of the cascaded sensor shifting much more than the single FSI. Experimental results show that the temperature sensitivity is enhanced from −1.4 nm/°C (single FSI) to −29.0 (cascaded configuration). The enhancement factor is 20.7, which is basically consistent with theoretical analysis (19.9).

is realized handily by the same principle. Hence, our results may open up new possibilities for improving the light-matter interaction in monolayer transition-metal dichalcogenides and find utility in wavelength-selective photoluminescence and photodetection.

A new regime of precision radial-velocity measurements in the search for Earth-like exoplanets is being facilitated by high-resolution spectrographs calibrated by laser frequency combs. Here we review recent advances in the development of astrocomb technology, and discuss the state of the field going forward.

We systematically analyze the ambient contrast ratio (ACR) of liquid crystal displays (LCDs) and organic light-emitting diode (OLED) displays for smartphones, TVs, and public displays. The influencing factors such as display brightness, ambient light illuminance, and surface reflection are investigated in detail. At low ambient light conditions, high static contrast ratio plays a key role for ACR. As the ambient light increases, high brightness gradually takes over. These quantitative results set important guidelines for future display optimization. Meanwhile, to improve an OLED’s ACR at large oblique angles, we propose a new broadband and wide-view circular polarizer consisting of one linear polarizer and two biaxial films. Good performance is realized.

In this paper, three Fano resonances based on three different physical mechanisms are theoretically and numerically investigated in a plasmonic resonator system, comprised of two circular cavities. And the multimode interference coupled mode theory (MICMT) including coupling phases is proposed to explain the Fano resonances in plasmonic resonator system. According to MICMT, one of the Fano resonances originates from the interference between different resonant modes of one resonator, the other is induced by the interference between the resonant modes of different resonators. Mode degeneracy is removed when the symmetry of the system is broken, thereby emerging the third kind of Fano resonance which is called degenerate interference Fano resonance, and the degenerate interference coupled mode theory (DICMT) is proposed to explain this kind of Fano resonance. The sensitivity and FOM* (figure of merit) of these Fano resonances can be as high as 840 nm/RIU and 100, respectively. These are useful for fundamental study and applications in sensors, splitters and slow-light devices.

Donut-shaped laser radiation, carrying orbital angular momentum, namely optical vortex, was recently shown to provide vectorial mass transfer, twisting transiently molten material and producing chiral micro-scale structures on surfaces of different bulk materials upon their resolidification. In this paper, we show that at high-NA focusing nanosecond laser vortices can produce chiral nanoneedles (nanojets) of variable size on thin films of such plasmonic materials, as silver and gold films, covering thermally insulating substrates. Main geometric parameters of the produced chiral nanojets, such as height and aspect ratio, were shown to be tunable in a wide range by varying metal film thickness, supporting substrates, and the optical size of the vortex beam. Donut-shaped vortex nanosecond laser pulses, carrying two vortices with opposite handedness, were demonstrated to produce two chiral nanojets twisted in opposite directions. These results suggest optical interference of the incident and reflected laser beams as a source of complex surface intensity distributions in metal films,…

We demonstrate a plasmonic Mach-Zehnder (MZ) modulator with a flat frequency response exceeding 170 GHz. The modulator comprises two phase modulators exploiting the Pockels effect of an organic electro-optic material in plasmonic slot waveguides. We further show modulation at 100 GBd NRZ and 60 GBd PAM-4. The electrical drive signals were generated using a 100 GSa/s digital to analog converter (DAC). The high-speed and small-scale devices are relevant for next-generation optical interconnects.

Multimode fibers can guide thousands of modes capable of delivering spatial information. Unfortunately, mode dispersion and coupling have so far prevented their use in endoscopic applications. To address this long-lasting challenge, we present a robust scanning fluorescence endoscope. A spatial light modulator shapes the input excitation wavefront to focus light on the distal tip of the fiber and to rapidly scan the focus over the region of interest. A detector array collects the fluorescence emission propagated back from the sample to the proximal tip of the fiber. We demonstrate that proper selection of the multimode fiber is critical for a robust calibration and for high signal-to-background ratio performance. We compare different types of multimode fibers and experimentally show that a focus created through a graded-index fiber can withstand a few millimeters of fiber distal tip translation. The resulting scanning endoscopic microscope images fluorescent samples over a field of view of 80µm with a resolution of 2µm.

As a direct band gap two-dimensional (2D) semiconductor material, black phosphorus (BP) bridges the characteristics of graphene, with a zero or near-zero band gap, and transition metal dichalcogenides, with a wide band gap. In the infrared (IR) regime, 2D BP materials can harvest electromagnetic energy due to losses derived from its surface conductivity. In this paper, we propose an IR absorber design comprising 2D BP metamaterials sandwiched between dielectric layers. The multilayered sandwich-like absorber structure is mounted on a full reflective gold mirror, which forms a Fabry-Perot resonator to strengthen light-matter interactions. Harvested surface plasmons are excited around the 2D BP metamaterial edges, and the incident IR light can be efficiently dissipated by increasing the number of layers of the sandwich-like structure (NLSS). The physical absorption mechanism can be attributed to the destructive interference from the metamaterials, which can be enhanced with increasing NLSS. Here, a phase difference of about 180° is obtained between the directly reflected wave from the…

) integrated optical waveguides, pumped at telecommunication wavelengths. The pump laser is a mode-locked erbium fiber laser at a wavelength of 1.56 µm with a pulse duration of 120 fs. With a waveguide-internal pulse energy of 1.4 nJ and a waveguide with 1.0 µm × 0.9 µm cross section, designed for anomalous dispersion across the 1500 nm telecommunication range, the output spectrum extends from the visible, at around 526 nm, up to the mid-infrared, at least to 2.6 µm, the instrumental limit of our detection. This output spans more than 2.2 octaves (454 THz at the -30 dB level). The measured output spectra agree well with theoretical modeling based on the generalized nonlinear Schrödinger equation. The infrared part of the supercontinuum spectra shifts progressively towards the mid-infrared, well beyond 2.6 µm, by increasing the width of the waveguides.

We demonstrate an imaging technique that allows identification and classification of objects hidden behind scattering media and is invariant to changes in calibration parameters within a training range. Traditional techniques to image through scattering solve an inverse problem and are limited by the need to tune a forward model with multiple calibration parameters (like camera field of view, illumination position etc.). Instead of tuning a forward model and directly inverting the optical scattering, we use a data driven approach and leverage convolutional neural networks (CNN) to learn a model that is invariant to calibration parameters variations within the training range and nearly invariant beyond that. This effectively allows robust imaging through scattering conditions that is not sensitive to calibration. The CNN is trained with a large synthetic dataset generated with a Monte Carlo (MC) model that contains random realizations of major calibration parameters. The method is evaluated with a time-resolved camera and multiple experimental results are provided including pose…

We report mode-locking in holmium-doped all-fiber laser based on black phosphorus saturable absorber. The generated solitons are centered at 2094 nm with bandwidth reaching 4.2 nm and pulse duration of 1.3 ps. In harmonic mode-locking, up to 10th harmonic (290 MHz) was obtained. Properties of black phosphorus saturable absorber are investigated. Our findings validate black phosphorus suitability for ultrafast applications in mid-infrared.

In this paper, few-layer porous graphene is integrated onto the surface of a metasurface layer to provide a uniform static electric field to efficiently control liquid crystal, thereby enabling flexible metamaterial designs. We demonstrate a tunable cross-shaped metamaterial absorber with different arm lengths driven by this combined metasurface and graphene electrode. The resulting absorber supports a resonant frequency tunable from 0.75 to 1 THz with a high-quality factor, and amplitude modulation of ~80% at these frequencies with an applied voltage of 10 V. Furthermore, the near-field intensity and hot spot distribution can be manipulated over a broad range.

higher than that of tandem cells with the usual polarity and a front-emitter silicon bottom cell. Switching from the regular to the inverse architecture leads to over 2% (absolute) gain in power conversion efficiency. Finally we show that an efficiency of 30.8% is achievable for such tandem cells with an optimized perovskite band-gap.

Long-distance quantum channels capable of transferring quantum states faithfully for unconditionally secure quantum communication have been so far confirmed to be feasible in both fiber and free-space air. However, it remains unclear whether seawater, which covers more than 70% of the earth, can also be utilized, leaving global quantum communication incomplete. Here we experimentally demonstrate that polarization quantum states including general qubits of single photon and entangled states can survive well after travelling through seawater. We perform experiments with seawater collected over a range of 36 kilometers in the Yellow Sea. For single photons at 405 nm in a blue-green window, we obtain an average process fidelity above 98%. For entangled photons at 810nm, albeit very high loss, we observe the violation of Bell inequality with 33 standard deviations. Our results confirm the feasibility of a seawater quantum channel, representing the first step towards underwater quantum communication.

CO in breath compared to natural abundance.

and single facet output power exceeding 130 mW at room temperature.

A label-free optical biosensor based on a one-dimensional photonic crystal microring resonator with enhanced light-matter interaction is demonstrated. More than a 2-fold improvement in volumetric and surface sensing sensitivity is achieved compared to conventional microring sensors. The experimental bulk detection sensitivity is ~248nm/RIU and label-free detection of DNA and proteins is reported at the nanomolar scale. With a minimum feature size greater than 100nm, the photonic crystal microring resonator biosensor can be fabricated with the same standard lithographic techniques used to mass fabricate conventional microring resonators.

A remote-sensing system that can determine the position of hidden objects has applications in many critical real-life scenarios, such as search and rescue missions and safe autonomous driving. Previous work has shown the ability to range and image objects hidden from the direct line of sight, employing advanced optical imaging technologies aimed at small objects at short range. In this work we demonstrate a long-range tracking system based on single laser illumination and single-pixel single-photon detection. This enables us to track one or more people hidden from view at a stand-off distance of over 50 m. These results pave the way towards next generation LiDAR systems that will reconstruct not only the direct-view scene but also the main elements hidden behind walls or corners.

We monitored the state of polarization (SOP) of polarized light in an optical ground wire (OPGW) link located in North America using a test method and apparatus that measured Stokes space angular velocity and geographic location of SOP transients. We observed transients up to 5.1 Mrad/s and were able to correlate these events in both time and location to lightning strikes documented by the United States Precision Lightning Network (USPLN).

We demonstrate the implementation of a compact tunable-focus liquid lens suitable for adaptive eyeglass application. The lens has an aperture diameter of 32 mm, optical power range of 5.6 diopter, and electrical power consumption less than 20 mW. The lens inclusive of its piezoelectric actuation mechanism is 8.4 mm thick and weighs 14.4 gm. The measured lens RMS wavefront aberration error was between 0.73 µm and 0.956 µm.

Temporal phase unwrapping (TPU) is an essential algorithm in fringe projection profilometry (FPP), especially when measuring complex objects with discontinuities and isolated surfaces. Among others, the multi-frequency TPU has been proven to be the most reliable algorithm in the presence of noise. For a practical FPP system, in order to achieve an accurate, efficient, and reliable measurement, one needs to make wise choices about three key experimental parameters: the highest fringe frequency, the phase-shifting steps, and the fringe pattern sequence. However, there was very little research on how to optimize these parameters quantitatively, especially considering all three aspects from a theoretical and analytical perspective simultaneously. In this work, we propose a new scheme to determine simultaneously the optimal fringe frequency, phase-shifting steps and pattern sequence under multi-frequency TPU, robustly achieving high accuracy measurement by a minimum number of fringe frames. Firstly, noise models regarding phase-shifting algorithms as well as 3-D coordinates are…

The significant optical and size benefits of using a curved focal surface for imaging systems have been well studied yet never brought to market for lack of a high-quality, mass-producible, curved image sensor. In this work we demonstrate that commercial silicon CMOS image sensors can be thinned and formed into accurate, highly curved optical surfaces with undiminished functionality. Our key development is a pneumatic forming process that avoids rigid mechanical constraints and suppresses wrinkling instabilities. A combination of forming-mold design, pressure membrane elastic properties, and controlled friction forces enables us to gradually contact the die at the corners and smoothly press the sensor into a spherical shape. Allowing the die to slide into the concave target shape enables a threefold increase in the spherical curvature over prior approaches having mechanical constraints that resist deformation, and create a high-stress, stretch-dominated state. Our process creates a bridge between the high precision and low-cost but planar CMOS process, and ideal non-planar component…

We demonstrate imaging of complex amplitude objects through digital holography with phase-structured illumination and bucket detection. The object is sampled with a set of micro-structured phase patterns implemented onto a liquid-crystal spatial light modulator while a bucket detector sequentially records the irradiance fluctuations corresponding to the interference between object and reference beams. Our reconstruction algorithm retrieves the unknown phase information from the full set of photocurrent measurements. Interestingly, the sampling functions can be codified onto the reference beam, so they can be nonlocal with respect to the object. Finally, we show that the system is well-fitted for transmission of the object information through scattering media.

based phase shifter in one arm, an all-optical switch is also obtained with an extinction ratio of 15 dB and a rise time of 7.3 ms. This all fiber low-cost and compact optical phase shifter and switch demonstrates the potential of 2D transition metal dichalcogenides for all-optical signal processing devices.

We study a 3D-printed hollow core terahertz (THz) Bragg waveguide for resonant surface sensing applications. We demonstrate theoretically and confirm experimentally that by introducing a defect in the first layer of the Bragg reflector, thereby causing anticrossing between the dispersion relations of the core-guided mode and the defect mode, we can create a sharp transmission dip in the waveguide transmission spectrum. By tracking changes in the spectral position of the narrow transmission dip, one can build a sensor, which is highly sensitive to the optical properties of the defect layer. To calibrate our sensor, we use PMMA layers of various thicknesses deposited onto the waveguide core surface. The measured sensitivity to changes in the defect layer thickness is found to be 0.1 GHz/μm. Then, we explore THz resonant surface sensing using α-lactose monohydrate powder as an analyte. We employ a rotating THz Bragg fiber and a semi-automatic powder feeder to explore the limit of the analyte thickness detection using a surface modality. We demonstrate experimentally that powder layer…

High performance III-V lasers at datacom and telecom wavelengths on on-axis (001) Si are needed for scalable datacenter interconnect technologies. We demonstrate electrically injected quantum dot lasers grown on on-axis (001) Si patterned with {111} v-grooves lying in the [110] direction. No additional Ge buffers or substrate miscut was used. The active region consists of five InAs/InGaAs dot-in-a-well layers. We achieve continuous wave lasing with thresholds as low as 36 mA and operation up to 80°C.

The trade-off between the spectral bandwidth and average output power from chalcogenide fiber-based mid-infrared supercontinuum sources is one of the major challenges towards practical application of the technology. In this paper we address this challenge through tapering of large-mode-area chalcogenide photonic crystal fibers. Compared to previously reported step-index fiber tapers the photonic crystal fiber structure ensures single-mode propagation, which improves the beam quality and reduces losses in the taper due to higher-order mode stripping. By pumping the tapered fibers at 4 μm using a MHz optical parametric generation source, and choosing an appropriate length of the untapered fiber segments, the output could be tailored for either the broadest bandwidth from 1 to 11.5 μm with 35.4 mW average output power, or the highest output power of 57.3 mW covering a spectrum from 1 to 8 μm.

. The vacuum-packaged sensor heads are optically heated and consume on average 76 ± 7 mW of power each. The heating power is provided by an array of eight diode lasers. Magnetic field imaging of small probe coils was obtained with the sensor array and fits to the expected field pattern agree well with the measured data.

High-sensitivity complex refractive index sensing is proposed and experimentally demonstrated, favoring with sharp Fano resonance at 1550 nm wavelength based on subwavelength grating waveguide (SWG) micro-ring resonator. The micro-ring is composed by trapezoidal silicon pillars with subwavelength period to enhance the light-analyte overlap and get high quality factor as well. One straight SWG waveguide is side coupled with the micro-ring, which is specially designed to produce partial Fabry-Perot (FP) effect. Due to the interaction of resonant state of micro-ring and partial FP effect in straight waveguide, a sharp asymmetrical Fano resonance is formed at 1550 nm wavelength. Benefit from the large light-analyte overlap of the SWG waveguide structure and the sharp asymmetrical Fano resonance in spectrum, high theoretical sensitivities of 366 nm/RIU and 9700/RIU can be realized for the real part (n) and the imaginary part (κ) of refractive index respectively. We also experimentally demonstrate the sensing for glucose solution concentrations, and high experimental sensitivity of…

We present a dual-comb spectrometer based on two passively mode-locked waveguide lasers integrated in a single Er-doped ZBLAN chip. This original design yields two free-running frequency combs having a high level of mutual stability. We developed in parallel a self-correction algorithm that compensates residual relative fluctuations and yields mode-resolved spectra without the help of any reference laser or control system. Fluctuations are extracted directly from the interferograms using the concept of ambiguity function, which leads to a significant simplification of the instrument that will greatly ease its widespread adoption and commercial deployment. Comparison with a correction algorithm relying on a single-frequency laser indicates discrepancies of only 50 attoseconds on optical timings. The capacities of this instrument are finally demonstrated with the acquisition of a high-resolution molecular spectrum covering 20 nm. This new chip-based multi-laser platform is ideal for the development of high-repetition-rate, compact and fieldable comb spectrometers in the near- and…

s pulse widths. These enable hard X-ray phase-contrast imaging (XPCI) with single-bunch temporal resolutions. In this work, we exploited the MHz repetition rates of synchrotron X-ray pulses combined with indirect X-ray detection to demonstrate the potential of XPCI with millions of frames per second multiple-frame recording. This allows for the visualization of aperiodic or stochastic transient processes which are impossible to be realized using single-shot or stroboscopic XPCI. We present observations of various phenomena, such as crack tip propagation in glass, shock wave propagation in water and explosion during electric arc ignition, which evolve in the order of km/s (µm/ns).

Applying the angular spectrum theory, we derive the expression of a new Hermite-Gaussian (HG) vortex beam. Based on the new Hermite-Gaussian (HG) vortex beam, we establish the model of the received probability density of orbital angular momentum (OAM) modes of this beam propagating through a turbulent ocean of anisotropy. By numerical simulation, we investigate the influence of oceanic turbulence and beam parameters on the received probability density of signal OAM modes and crosstalk OAM modes of the HG vortex beam. The results show that the influence of oceanic turbulence of anisotropy on the received probability of signal OAM modes is smaller than isotropic oceanic turbulence under the same condition, and the effect of salinity fluctuation on the received probability of the signal OAM modes is larger than the effect of temperature fluctuation. In the strong dissipation of kinetic energy per unit mass of fluid and the weak dissipation rate of temperature variance, we can decrease the effects of turbulence on the received probability of signal OAM modes by selecting a long…

We propose a non-orthogonal multiple access (NOMA) scheme combined with orthogonal frequency division multiplexing access (OFDMA) for visible light communications (VLC), which offers a high throughput, flexible bandwidth allocation and a higher system capacity for a larger number of users. Bidirectional NOMA-OFDMA VLC is experimentally demonstrated. The effects of power allocation and channel estimation on the bit error rate performance are investigated. The experiment results indicate that accurate channel estimation can eliminate the inter-user interference more effectively. The optimum power allocation ratios for uplink and downlink are both about 0.25 in the case of two users.

Recent works have demonstrated non-line of sight (NLOS) reconstruction by using the time-resolved signal from multiply scattered light. These works combine ultrafast imaging systems with computation, which back-projects the recorded space-time signal to build a probabilistic map of the hidden geometry. Unfortunately, this computation is slow, becoming a bottleneck as the imaging technology improves. In this work, we propose a new back-projection technique for NLOS reconstruction, which is up to a thousand times faster than previous work, with almost no quality loss. We base on the observation that the hidden geometry probability map can be built as the intersection of the three-bounce space-time manifolds defined by the light illuminating the hidden geometry and the visible point receiving the scattered light from such hidden geometry. This allows us to pose the reconstruction of the hidden geometry as the voxelization of these space-time manifolds, which has lower theoretic complexity and is easily implementable in the GPU. We demonstrate the efficiency and quality of our technique…

Polarization-division multiplexed (PDM) transmission based on the nonlinear Fourier transform (NFT) is proposed for optical fiber communication. The NFT algorithms are generalized from the scalar nonlinear Schrödinger equation for one polarization to the Manakov system for two polarizations. The transmission performance of the PDM nonlinear frequency-division multiplexing (NFDM) and PDM orthogonal frequency-division multiplexing (OFDM) are determined. It is shown that the transmission performance in terms of Q-factor is approximately the same in PDM-NFDM and single polarization NFDM at twice the data rate and that the polarization-mode dispersion does not seriously degrade system performance. Compared with PDM-OFDM, PDM-NFDM achieves a Q-factor gain of 6.4 dB. The theory can be generalized to multi-mode fibers in the strong coupling regime, paving the way for the application of the NFT to address the nonlinear effects in space-division multiplexing.

mg/mL, respectively. Moreover, this biosensor is a sub-microliter dose and ultrasensitive at the low concentrations detected in BSA, which make it a promising for biochemical applications such as DNA hybridization, cancer screenings, medicine examination and environmental engineering, etc.

shell, and it was found that an excitation-power-density-dependent temperature increase of up to several tens degrees can be achieved. All the experimental results suggested that the core-shell structure may be an excellent nanocalorifier candidate for advanced temperature-controllable PTT.

We present a slope-assisted BOTDA system based on the vector stimulated Brillouin scattering (SBS) and frequency-agile technique (FAT) for the wide-strain-range dynamic measurement. A dimensionless coefficient K defined as the ratio of Brillouin phase-shift to gain is employed to demodulate the strain of the fiber, and it is immune to the power fluctuation of pump pulse and has a linear relation of the frequency detuning for the continuous pump and Stokes waves. For a 30ns-square pump pulse, the available frequency span of the K spectrum can reach up to 200MHz, which is larger than fourfold of 48MHz-linewidth of Brillouin gain spectrum. For a single-slope assisted BOTDA, dynamic strain measurement with the maximum strain of 2467.4με and the vibration frequency components of 10.44Hz and 20.94Hz is obtained. For a multi-slope-assisted BOTDA, dynamic measurement with the strain variation up to 5372.9με and the vibration frequency components of 5.58Hz and 11.14Hz is achieved by using FAT to extend the strain range.

A distributed optical fibre acoustic sensor is numerically modelled. To increase the flexibility of the model, the building blocks of the sensing system are modelled separately and later combined to form the numerical model. This approach is adopted to facilitate the evaluation of each of the individual building blocks and their effects on the output of the sensor. The numerical model is used to assess the effect of parameters such as the linewidth of the laser source, the width of the probe pulse, and the frequency and amplitude of perturbation on the response of the sensing system. It is shown that the precision and accuracy of the sensing system are affected by the frequency and amplitude of perturbation as well as the pulse width and linewidth of the probe pulse.

We present a three-layer silicon nitride on silicon platform for constructing very large photonic integrated circuits. Efficient interlayer transitions are enabled by the close spacing between adjacent layers, while ultra-low-loss crossings are enabled by the large spacing between the topmost and bottommost layers. We demonstrate interlayer taper transitions with losses < 0.15 dB for wavelengths spanning from 1480 nm to 1620 nm. Our overpass waveguide crossings exhibit insertion loss < 2.1 mdB and crosstalk below -56 dB in the wavelength range between 1480 nm and 1620 nm with losses as low as 0.28 mdB. Our platform architecture is suited to meet the demands of large-scale photonic circuits which contain hundreds of crossings.

Translational, rotational, vibrational and electron temperatures of a gliding arc discharge in atmospheric pressure air were experimentally investigated using in situ, non-intrusive optical diagnostic techniques. The gliding arc discharge was driven by a 35 kHz alternating current (AC) power source and operated in a glow-type regime. The two-dimensional distribution of the translational temperature (Tt) of the gliding arc discharge was determined using planar laser-induced Rayleigh scattering. The rotational and vibrational temperatures were obtained by simulating the experimental spectra. The OH A-X (0, 0) band was used to simulate the rotational temperature (Tr) of the gliding arc discharge whereas the NO A-X (1, 0) and (0, 1) bands were used to determine its vibrational temperature (Tv). The instantaneous reduced electric field strength E/N was obtained by simultaneously measuring the instantaneous length of the plasma column, the discharge voltage and the translational temperature, from which the electron temperature (Te) of the gliding arc discharge was estimated. The…

In this work, we proposed two k-means-clustering-based algorithms to mitigate the fiber nonlinearity for 64-quadrature amplitude modulation (64-QAM) signal, the training-sequence assisted k-means algorithm and the blind k-means algorithm. We experimentally demonstrated the proposed k-means-clustering-based fiber nonlinearity mitigation techniques in 75-Gb/s 64-QAM coherent optical communication system. The proposed algorithms have reduced clustering complexity and low data redundancy and they are able to quickly find appropriate initial centroids and select correctly the centroids of the clusters to obtain the global optimal solutions for large k value. We measured the bit-error-ratio (BER) performance of 64-QAM signal with different launched powers into the 50-km single mode fiber and the proposed techniques can greatly mitigate the signal impairments caused by the amplified spontaneous emission noise and the fiber Kerr nonlinearity and improve the BER performance.

We present a powerful method to enhance the magnetic plasmon (MP) resonances of metamaterials composed of periodic arrays of U-shaped metallic split-ring resonators (SRRs) for high-quality sensing. We show that by suspending the metamaterials to reduce the effect of the substrate, the strong diffraction coupling of MP resonances can be achieved, which leads to a narrow-band mixed MP mode with a large magnetic field enhancement. It is also shown that for such a diffraction coupling, the magnetic field component of the lattice resonance mode of periodic arrays must be parallel to the induced magnetic moment in the metallic SRRs. Importantly, the sensitivity and the figure of merit (FOM) of the suspended metamaterials can reach as high as 1300 nm/RIU and 40, respectively. These results suggest that the proposed metamaterials may find great potential applications in label-free biomedical sensing.

We demonstrate a mode-locked all-fiber Tm laser using a single mode-step index multimode-graded-index multimode-single mode fiber structure as a saturable absorber based on the nonlinear multimodal interference. Stable fundamentally mode-locking operation was obtained at a pump threshold of 180mW. The output soliton pulses had a center wavelength, spectral width, pulse duration, and repetition rate of 1888 nm, 3.6 nm, 1.4 ps, and19.82 MHz, respectively. This is a simple, low-cost, stable, and convenient laser oscillator with many potential applications in eye-safe ultrafast photonics.

Inter-core crosstalk is a potential limitation on the achievable data-rates in optical fiber transmission systems using multi-core fibers. Crosstalk arises from unwanted coupling between cores of a homogenous multi-core fiber and it's average power has been observed to vary over time by 10s of decibels, potentially requiring an additional performance margin to achieve acceptable outage probability. Most investigations of crosstalk have so far only considered continuous wave laser light or amplified spontaneous emission as sources of crosstalk. In this paper, we theoretically and experimentally investigate the time-dependence of inter-core crosstalk in a homogeneous multi-core fiber when considering signals with various modulation formats and symbol rates. We find that crosstalk power fluctuations depend on the symbol rate, modulation and skew between cores. For carrier-free signals, such as quadrature amplitude modulation, the crosstalk power is nearly constant for expected conditions of multi-core transmission systems. However, carrier-supported signals, such as OOK, always induce…

Germanium photodetectors are considered to be mature components in the silicon photonics device library. They are critical for applications in sensing, communications, or optical interconnects. In this work, we report on design, fabrication, and experimental demonstration of an integrated waveguide PIN photodiode architecture that calls upon lateral double Silicon/Germanium/Silicon (Si/Ge/Si) heterojunctions. This photodiode configuration takes advantage of the compatibility with contact process steps of silicon modulators, yielding reduced fabrication complexity for transmitters and offering high-performance optical characteristics, viable for high-speed and efficient operation near 1.55 μm wavelengths. More specifically, we experimentally obtained at a reverse voltage of 1V a dark current lower than 10 nA, a responsivity higher than 1.1 A/W, and a 3 dB opto-electrical cut-off frequency over 50 GHz. The combined benefits of decreased process complexity and high-performance device operation pave the way towards attractive integration strategies to deploy cost-effective photonic…

integrated path differential absorption (IPDA) lidar as precursors for use in space lidar.