The 50 most-cited articles in Environmental Science & Technology, 2016

Microplastics have become emerging contaminants, causing widespread concern about their potential toxic effects. In this study, the uptake and tissue accumulation of polystyrene microplastics (PS-MPs) in zebrafish were detected, and the toxic effects in liver were investigated. The results showed that after 7 days of exposure, 5 μm diameter MPs accumulated in fish gills, liver, and gut, while 20 μm diameter MPs accumulated only in fish gills and gut. Histopathological analysis showed that both 5 μm and 70 nm PS-MPs caused inflammation and lipid accumulation in fish liver. PS-MPs also induced significantly increased activities of superoxide dismutase and catalase, indicating that oxidative stress was induced after treatment with MPs. In addition, metabolomic analysis suggested that exposure to MPs induced alterations of metabolic profiles in fish liver and disturbed the lipid and energy metabolism. These findings provide new insights into the toxic effects of MPs on fish.

Municipal effluent discharged from wastewater treatment works (WwTW) is suspected to be a significant contributor of microplastics (MP) to the environment as many personal care products contain plastic microbeads. A secondary WwTW (population equivalent 650 000) was sampled for microplastics at different stages of the treatment process to ascertain at what stage in the treatment process the MP are being removed. The influent contained on average 15.70 (±5.23) MP·L(-1). This was reduced to 0.25 (±0.04) MP·L(-1) in the final effluent, a decrease of 98.41%. Despite this large reduction we calculate that this WwTW is releasing 65 million microplastics into the receiving water every day. A significant proportion of the microplastic accumulated in and was removed during the grease removal stage (19.67 (±4.51) MP/2.5 g), it was only in the grease that the much publicised microbeads were found. This study shows that despite the efficient removal rates of MP achieved by this modern treatment plant when dealing with such a large volume of effluent even a modest amount of microplastics being…

ADVERTISEMENT RETURN TO ISSUEPREVViewpointNEXTAre Agricultural Soils Dumps for Microplastics of Urban Origin?Luca Nizzetto*†‡, Martyn Futter§, and Sindre Langaas†View Author Information† Norwegian Institute for Water Research, NO-0349, Oslo, Norway‡ Research Centre for Toxic Compounds in the Environment, Masaryk University, 62500, Brno, Czech Republic§ Department of Aquatic Sciences and Assessment, Swedish University of Agricultural Sciences, Uppsala, Sweden*E-mail: [email protected]Cite this: Environ. Sci. Technol. 2016, 50, 20, 10777–10779Publication Date (Web):September 29, 2016Publication History Received16 August 2016Published online29 September 2016Published inissue 18 October 2016https://pubs.acs.org/doi/10.1021/acs.est.6b04140https://doi.org/10.1021/acs.est.6b04140newsACS PublicationsCopyright © 2016 American Chemical Society. This publication is available under these Terms of Use. Request reuse permissions This publication is free to access through this site. Learn MoreArticle Views36706Altmetric-Citations1019LEARN ABOUT THESE METRICSArticle Views are the COUNTER-compliant…

Numerous studies have investigated the environmental occurrence, human exposure, and toxicity of bisphenol A (BPA). Following stringent regulations on the production and usage of BPA, several bisphenol analogues have been produced as a replacement for BPA in various applications. The present review outlines the current state of knowledge on the occurrence of bisphenol analogues (other than BPA) in the environment, consumer products and foodstuffs, human exposure and biomonitoring, and toxicity. Whereas BPA was still the major bisphenol analogue found in most environmental monitoring studies, BPF and BPS were also frequently detected. Elevated concentrations of BPAF, BPF, and BPS (i.e., similar to or greater than that of BPA) have been reported in the abiotic environment and human urine from some regions. Many analogues exhibit endocrine disrupting effects, cytotoxicity, genotoxicity, reproductive toxicity, dioxin-like effects, and neurotoxicity in laboratory studies. BPAF, BPB, BPF, and BPS have been shown to exhibit estrogenic and/or antiandrogenic activities similar to or even…

The hypothesis that 'microplastic will transfer hazardous hydrophobic organic chemicals (HOC) to marine animals' has been central to the perceived hazard and risk of plastic in the marine environment. The hypothesis is often cited and has gained momentum, turning it into paradigm status. We provide a critical evaluation of the scientific literature regarding this hypothesis. Using new calculations based on published studies, we explain the sometimes contrasting views and unify them in one interpretive framework. One explanation for the contrasting views among studies is that they test different hypotheses. When reframed in the context of the above hypothesis, the available data become consistent. We show that HOC microplastic-water partitioning can be assumed to be at equilibrium for most microplastic residing in the oceans. We calculate the fraction of total HOC sorbed by plastics to be small compared to that sorbed by other media in the ocean. We further demonstrate consistency among (a) measured HOC transfer from microplastic to organisms in the laboratory, (b) measured HOC…

The presence of heavy metals in the industrial effluents has recently been a challenging issue for human health. Efficient removal of heavy metal ions from environment is one of the most important issues from biological and environmental point of view, and many studies have been devoted to investigate the environmental behavior of nanoscale zerovalent iron (NZVI) for the removal of toxic heavy metal ions, present both in the surface and underground wastewater. The aim of this review is to show the excellent removal capacity and environmental remediation of NZVI-based materials for various heavy metal ions. A new look on NZVI-based materials (e.g., modified or matrix-supported NZVI materials) and possible interaction mechanism (e.g., adsorption, reduction and oxidation) and the latest environmental application. The effects of various environmental conditions (e.g., pH, temperature, coexisting oxy-anions and cations) and potential problems for the removal of heavy metal ions on NZVI-based materials with the DFT theoretical calculations and EXAFS technology are discussed. Research…

As human populations increase and land-use intensifies, toxic and unsightly nuisance blooms of algae are becoming larger and more frequent in freshwater lakes. In most cases, the blooms are predominantly blue-green algae (Cyanobacteria), which are favored by low ratios of nitrogen to phosphorus. In the past half century, aquatic scientists have devoted much effort to understanding the causes of such blooms and how they can be prevented or reduced. Here we review the evidence, finding that numerous long-term studies of lake ecosystems in Europe and North America show that controlling algal blooms and other symptoms of eutrophication depends on reducing inputs of a single nutrient: phosphorus. In contrast, small-scale experiments of short duration, where nutrients are added rather than removed, often give spurious and confusing results that bear little relevance to solving the problem of cyanobacteria blooms in lakes.

Plastic debris is widespread in the environment, but information on the effects of microplastics on terrestrial fauna is completely lacking. Here, we studied the survival and fitness of the earthworm Lumbricus terrestris (Oligochaeta, Lumbricidae) exposed to microplastics (Polyethylene, <150 μm) in litter at concentrations of 7, 28, 45, and 60% dry weight, percentages that, after bioturbation, translate to 0.2 to 1.2% in bulk soil. Mortality after 60 days was higher at 28, 45, and 60% of microplastics in the litter than at 7% w/w and in the control (0%). Growth rate was significantly reduced at 28, 45, and 60% w/w microplastics, compared to the 7% and control treatments. Due to the digestion of ingested organic matter, microplastic was concentrated in cast, especially at the lowest dose (i.e., 7% in litter) because that dose had the highest proportion of digestible organic matter. Whereas 50 percent of the microplastics had a size of <50 μm in the original litter, 90 percent of the microplastics in the casts was <50 μm in all treatments, which suggests size-selective egestion by the…

In this study, we evaluated accumulation and adverse effects of ingestion of microplastics in the monogonont rotifer (Brachionus koreanus). The dependence of microplastic toxicity on particle size was investigated by measuring several in vivo end points and studying the ingestion and egestion using 0.05-, 0.5-, and 6-μm nonfunctionalized polystyrene microbeads. To identify the defense mechanisms activated in response to microplastic exposure, the activities of several antioxidant-related enzymes and the phosphorylation status of mitogen-activated protein kinases (MAPKs) were determined. Exposure to polystyrene microbeads of all sizes led to significant size-dependent effects, including reduced growth rate, reduced fecundity, decreased lifespan and longer reproduction time. Rotifers exposed to 6-μm fluorescently labeled microbeads exhibited almost no fluorescence after 24 h, while rotifers exposed to 0.05- and 0.5-μm fluorescently labeled microbeads displayed fluorescence until 48 h, suggesting that 6-μm microbeads are more effectively egested from B. koreanus than 0.05- or 0.5-μm…

A method based on pressurized fluid extraction (PFE) was developed for measuring microplastics in environmental samples. This method can address some limitations of the current microplastic methods and provide laboratories with a simple analytical method for quantifying common microplastics in a range of environmental samples. The method was initially developed by recovering 101% to 111% of spiked plastics on glass beads and was then applied to a composted municipal waste sample with spike recoveries ranging from 85% to 94%. The results from municipal waste samples and soil samples collected from an industrial area demonstrated that the method is a promising alternative for determining the concentration and identity of microplastics in environmental samples.

We estimated global fine particulate matter (PM2.5) concentrations using information from satellite-, simulation- and monitor-based sources by applying a Geographically Weighted Regression (GWR) to global geophysically based satellite-derived PM2.5 estimates. Aerosol optical depth from multiple satellite products (MISR, MODIS Dark Target, MODIS and SeaWiFS Deep Blue, and MODIS MAIAC) was combined with simulation (GEOS-Chem) based upon their relative uncertainties as determined using ground-based sun photometer (AERONET) observations for 1998-2014. The GWR predictors included simulated aerosol composition and land use information. The resultant PM2.5 estimates were highly consistent (R(2) = 0.81) with out-of-sample cross-validated PM2.5 concentrations from monitors. The global population-weighted annual average PM2.5 concentrations were 3-fold higher than the 10 μg/m(3) WHO guideline, driven by exposures in Asian and African regions. Estimates in regions with high contributions from mineral dust were associated with higher uncertainty, resulting from both sparse ground-based…

Zero liquid discharge (ZLD)-a wastewater management strategy that eliminates liquid waste and maximizes water usage efficiency - has attracted renewed interest worldwide in recent years. Although implementation of ZLD reduces water pollution and augments water supply, the technology is constrained by high cost and intensive energy consumption. In this critical review, we discuss the drivers, incentives, technologies, and environmental impacts of ZLD. Within this framework, the global applications of ZLD in the United States and emerging economies such as China and India are examined. We highlight the evolution of ZLD from thermal- to membrane-based processes, and analyze the advantages and limitations of existing and emerging ZLD technologies. The potential environmental impacts of ZLD, notably greenhouse gas emission and generation of solid waste, are discussed and the prospects of ZLD technologies and research needs are highlighted.

Waste water treatment plants (WWTPs) are receptors for the cumulative loading of microplastics (MPs) derived from industry, landfill, domestic wastewater and stormwater. The partitioning of MPs through the settlement processes of wastewater treatment results in the majority becoming entrained in the sewage sludge. This study characterized MPs in sludge samples from seven WWTPs in Ireland which use anaerobic digestion (AD), thermal drying (TD), or lime stabilization (LS) treatment processes. Abundances ranged from 4196 to 15 385 particles kg –1 (dry weight). Results of a general linear mixed model (GLMM) showed significantly higher abundances of MPs in smaller size classes in the LS samples, suggesting that the treatment process of LS shears MP particles. In contrast, lower abundances of MPs found in the AD samples suggests that this process may reduce MP abundances. Surface morphologies examined using scanning electron microscopy (SEM) showed characteristics of melting and blistering of TD MPs and shredding and flaking of LS MPs. This study highlights the potential for sewage sludge…

Abstract Plastic debris is a growing contaminant of concern in freshwater environments, yet sources, transport, and fate remain unclear. This study characterized the quantity and morphology of floating micro- and macroplastics in 29 Great Lakes tributaries in six states under different land covers, wastewater effluent contributions, population densities, and hydrologic conditions. Tributaries were sampled three or four times each using a 333 μm mesh neuston net. Plastic particles were sorted by size, counted, and categorized as fibers/lines, pellets/beads, foams, films, and fragments. Plastics were found in all 107 samples, with a maximum concentration of 32 particles/m3 and a median of 1.9 particles/m3. Ninety-eight percent of sampled plastic particles were less than 4.75 mm in diameter and therefore considered microplastics. Fragments, films, foams, and pellets/beads were positively correlated with urban-related watershed attributes and were found at greater concentrations during runoff-event conditions. Fibers, the most frequently detected particle type, were not associated with…

Preventing harmful algal blooms (HABs) is needed to protect lakes and downstream ecosystems. Traditionally, reducing phosphorus (P) inputs was the prescribed solution for lakes, based on the assumption that P universally limits HAB formation. Reduction of P inputs has decreased HABs in many lakes, but was not successful in others. Thus, the "P-only" paradigm is overgeneralized. Whole-lake experiments indicate that HABs are often stimulated more by combined P and nitrogen (N) enrichment rather than N or P alone, indicating that the dynamics of both nutrients are important for HAB control. The changing paradigm from P-only to consideration of dual nutrient control is supported by studies indicating that (1) biological N fixation cannot always meet lake ecosystem N needs, and (2) that anthropogenic N and P loading has increased dramatically in recent decades. Sediment P accumulation supports long-term internal loading, while N may escape via denitrification, leading to perpetual N deficits. Hence, controlling both N and P inputs will help control HABs in some lakes and also reduce N…

Copper-iron bimetallic oxides have shown great potential for powerful radical production by activating peroxides. In this work, CuFeO2 rhombohedral crystals (RCs) were synthesized and used as heterogeneous catalysts for peroxymonosulfate (PMS) activation under various conditions. Sulfadiazine, a widely used veterinary sulfonamide, was used as a target pollutant to evaluate the efficiency of this combination. The results showed that of all the catalysts tested, the CuFeO2 RCs had the greatest reactivity. Under conditions of 0.1 g L(-1) CuFeO2 RCs and 33.0 μM PMS, the nearly complete degradation of sulfadiazine occurred within 24 min. A synergistic catalytic effect was found between solid Cu(I) and Fe(III), probably due to the accelerated reduction of Fe(III). The two activation stages that produced different radicals (hydroxyl radicals followed by sulfate radicals) existed when solid Cu(I) was used as the catalyst. The CuFeO2 RCs had a higher PMS utilization efficiency than CuFe2O4, probably because the Cu(I)-promoted reduction of solid Fe(III). A total of 10 products were…

This study introduces graphited nanodiamond (G-ND) as an environmentally friendly, easy-to-regenerate, and cost-effective alternative catalyst to activate persulfate (i.e., peroxymonosulfate (PMS) and peroxydisulfate (PDS)) and oxidize organic compounds in water. The G-ND was found to be superior for persulfate activation to other benchmark carbon materials such as graphite, graphene, fullerene, and carbon nanotubes. The G-ND/persulfate showed selective reactivity toward phenolic compounds and some pharmaceuticals, and the degradation kinetics were not inhibited by the presence of oxidant scavengers and natural organic matter. These results indicate that radical intermediates such as sulfate radical anion and hydroxyl radical are not majorly responsible for this persulfate-driven oxidation of organic compounds. The findings from linear sweep voltammetry, thermogravimetric analysis, Fourier transform infrared spectroscopy, and electron paramagnetic resonance spectroscopy analyses suggest that the both persulfate and phenol effectively bind to G-ND surface and are likely to form…

Chain elongation into medium-chain carboxylates, such as n-caproate and n-caprylate, with ethanol as an electron donor and with open cultures of microbial consortia (i.e., reactor microbiomes) under anaerobic conditions is being developed as a biotechnological production platform. The goal is to use the high thermodynamic efficiency of anaerobic fermentation to convert organic biomass or organic wastes into valuable biochemicals that can be extracted. Several liter-scale studies have been completed and a first pilot-plant study is underway. However, the underlying microbial pathways are not always well understood. In addition, an interdisciplinary approach with knowledge from fields ranging from microbiology and chemical separations to biochemistry and environmental engineering is required. To bring together research from different fields, we reviewed the literature starting with the microbiology and ending with the bioprocess engineering studies that already have been performed. Because understanding the microbial pathways is so important to predict and steer performance, we delved…

Plastic debris is a widespread contaminant, prevalent in aquatic ecosystems across the globe. Zooplankton readily ingest microscopic plastic (microplastic, < 1 mm), which are later egested within their faecal pellets. These pellets are a source of food for marine organisms, and contribute to the oceanic vertical flux of particulate organic matter as part of the biological pump. The effects of microplastics on faecal pellet properties are currently unknown. Here we test the hypotheses that (1) faecal pellets are a vector for transport of microplastics, (2) polystyrene microplastics can alter the properties and sinking rates of zooplankton egests and, (3) faecal pellets can facilitate the transfer of plastics to coprophagous biota. Following exposure to 20.6 μm polystyrene microplastics (1000 microplastics mL(-1)) and natural prey (∼1650 algae mL(-1)) the copepod Calanus helgolandicus egested faecal pellets with significantly (P < 0.001) reduced densities, a 2.25-fold reduction in sinking rates, and a higher propensity for fragmentation. We further show that microplastics,…

Phosphorus (P) is a critical, geographically concentrated, nonrenewable resource necessary to support global food production. In excess (e.g., due to runoff or wastewater discharges), P is also a primary cause of eutrophication. To reconcile the simultaneous shortage and overabundance of P, lost P flows must be recovered and reused, alongside improvements in P-use efficiency. While this motivation is increasingly being recognized, little P recovery is practiced today, as recovered P generally cannot compete with the relatively low cost of mined P. Therefore, P is often captured to prevent its release into the environment without beneficial recovery and reuse. However, additional incentives for P recovery emerge when accounting for the total value of P recovery. This article provides a comprehensive overview of the range of benefits of recovering P from waste streams, i.e., the total value of recovering P. This approach accounts for P products, as well as other assets that are associated with P and can be recovered in parallel, such as energy, nitrogen, metals and minerals, and…

The global estimation of microplastic afloat in the ocean is only approximately 1% of annual global plastic inputs. This reflects fundamental knowledge gaps in the transformation, fragmentation, and fates of microplastics in the ocean. In order to better understand microplastic fragmentation we proceeded to a thorough physicochemical characterization of samples collected from the North Artlantic subtropical gyre during the sea campaign Expedition seventh Continent in May 2014. The results were confronted with a mathematical approach. The introduction of mass distribution in opposition to the size distribution commonly proposed in this area clarify the fragmentation pattern. The mathematical analysis of the mass distribution points out a lack of debris with mass lighter than 1 mg. Characterization by means of microscopy, microtomography, and infrared microscopy gives a better understanding of the behavior of microplastic at sea. Flat pieces of debris (2 to 5 mm in length) typically have one face that is more photodegraded (due to exposure to the sun) and the other with more biofilm,…

Arsenic (As) and cadmium (Cd) concentrations in rice grains are a human health concern. We conducted field experiments to investigate optimal conditions of Eh and pH in soil for simultaneously decreasing As and Cd accumulation in rice. Water managements in the experiments, which included continuous flooding and intermittent irrigation with different intervals after midseason drainage, exerted striking effects on the dissolved As and Cd concentrations in soil through changes in Eh, pH, and dissolved Fe(II) concentrations in the soil. Intermittent irrigation with three-day flooding and five-day drainage was found to be effective for simultaneously decreasing the accumulation of As and Cd in grain. The grain As and Cd concentrations were, respectively, linearly related to the average dissolved As and Cd concentrations during the 3 weeks after heading. We propose a new indicator for expressing the degree to which a decrease in the dissolved As or Cd concentration is compromised by the increase in the other. For minimizing the trade-off relationship between As and Cd in rice grains in…

The persistent increase in atmospheric CO2 from anthropogenic sources makes research directed toward carbon capture and storage imperative. Current liquid amine absorption technology has several drawbacks including hazardous byproducts and a high-energy requirement for regeneration; therefore, research is ongoing to develop more practical methods for capturing CO2 in postcombustion scenarios. The unique properties of carbon-based materials make them specifically promising for CO2 adsorption at low temperature and moderate to high partial pressure. This critical review aims to highlight the development of carbon-based solid sorbents for postcombustion CO2 capture. Specifically, it provides an overview of postcombustion CO2 capture processes with solid adsorbents and discusses a variety of carbon-based materials that could be used. This review focuses on low-cost pyrogenic carbon, activated carbon (AC), and metal-carbon composites for CO2 capture. Further, it touches upon the recent progress made to develop metal organic frameworks (MOFs) and carbon nanomaterials and their general CO2…

Adsorption by minerals is a common geochemical process of dissolved organic matter (DOM) which may induce fractionation of DOM at the mineral-water interface. Here, we examine the molecular fractionation of DOM induced by adsorption onto three common iron oxyhydroxides using electrospray ionization coupled with Fourier-transform ion cyclotron resonance mass spectrometry (ESI-FT-ICR-MS). Ferrihydrite exhibited higher affinity to DOM and induced more pronounced molecular fractionation of DOM than did goethite or lepidocrocite. High molecular weight (>500 Da) compounds and compounds high in unsaturation or rich in oxygen including polycyclic aromatics, polyphenols and carboxylic compounds had higher affinity to iron oxyhydroxides and especially to ferrihydrite. Low molecular weight compounds and compounds low in unsaturation or containing few oxygenated groups (mainly alcohols and ethers) were preferentially maintained in solution. This study confirms that the double bond equivalence and the number of oxygen atoms are valuable parameters indicating the selective fractionation of DOM at…

Many of the devastating pandemics and outbreaks of the 20th and 21st centuries have involved enveloped viruses, including influenza, HIV, SARS, MERS, and Ebola. However, little is known about the presence and fate of enveloped viruses in municipal wastewater. Here, we compared the survival and partitioning behavior of two model enveloped viruses (MHV and ϕ6) and two nonenveloped bacteriophages (MS2 and T3) in raw wastewater samples. We showed that MHV and ϕ6 remained infective on the time scale of days. Up to 26% of the two enveloped viruses adsorbed to the solid fraction of wastewater compared to 6% of the two nonenveloped viruses. Based on this partitioning behavior, we assessed and optimized methods for recovering enveloped viruses from wastewater. Our optimized ultrafiltration method resulted in mean recoveries (±SD) of 25.1% (±3.6%) and 18.2% (±9.5%) for the enveloped MHV and ϕ6, respectively, and mean recoveries of 55.6% (±16.7%) and 85.5% (±24.5%) for the nonenveloped MS2 and T3, respectively. A maximum of 3.7% of MHV and 2% of MS2 could be recovered from the solids. These…

Global climate change is expected to affect waterborne enteric diseases, yet to date there has been no comprehensive, systematic review of the epidemiological literature examining the relationship between meteorological conditions and diarrheal diseases. We searched PubMed, Embase, Web of Science, and the Cochrane Collection for studies describing the relationship between diarrheal diseases and four meteorological conditions that are expected to increase with climate change: ambient temperature, heavy rainfall, drought, and flooding. We synthesized key areas of agreement and evaluated the biological plausibility of these findings, drawing from a diverse, multidisciplinary evidence base. We identified 141 articles that met our inclusion criteria. Key areas of agreement include a positive association between ambient temperature and diarrheal diseases, with the exception of viral diarrhea and an increase in diarrheal disease following heavy rainfall and flooding events. Insufficient evidence was available to evaluate the effects of drought on diarrhea. There is evidence to support the…

The need for an environmental risk assessment for engineered nanomaterials (ENM) necessitates the knowledge about their environmental concentrations. Despite significant advances in analytical methods, it is still not possible to measure the concentrations of ENM in natural systems. Material flow and environmental fate models have been used to provide predicted environmental concentrations. However, almost all current models are static and consider neither the rapid development of ENM production nor the fact that many ENM are entering an in-use stock and are released with a lag phase. Here we use dynamic probabilistic material flow modeling to predict the flows of four ENM (nano-TiO2, nano-ZnO, nano-Ag and CNT) to the environment and to quantify their amounts in (temporary) sinks such as the in-use stock and ("final") environmental sinks such as soil and sediment. Caused by the increase in production, the concentrations of all ENM in all compartments are increasing. Nano-TiO2 had far higher concentrations than the other three ENM. Sediment showed in our worst-case scenario…

Secondary organic aerosol (SOA) is formed from the atmospheric oxidation of gas-phase organic compounds leading to the formation of particle mass. Gasoline- and diesel-powered motor vehicles, both on/off-road, are important sources of SOA precursors. They emit complex mixtures of gas-phase organic compounds that vary in volatility and molecular structure-factors that influence their contributions to urban SOA. However, the relative importance of each vehicle type with respect to SOA formation remains unclear due to conflicting evidence from recent laboratory, field, and modeling studies. Both are likely important, with evolving contributions that vary with location and over short time scales. This review summarizes evidence, research needs, and discrepancies between top-down and bottom-up approaches used to estimate SOA from motor vehicles, focusing on inconsistencies between molecular-level understanding and regional observations. The effect of emission controls (e.g., exhaust aftertreatment technologies, fuel formulation) on SOA precursor emissions needs comprehensive evaluation,…

A number of models have been developed to estimate PM2.5 exposure, including satellite-based aerosol optical depth (AOD) models, land-use regression, or chemical transport model simulation, all with both strengths and weaknesses. Variables like normalized difference vegetation index (NDVI), surface reflectance, absorbing aerosol index, and meteoroidal fields are also informative about PM2.5 concentrations. Our objective is to establish a hybrid model which incorporates multiple approaches and input variables to improve model performance. To account for complex atmospheric mechanisms, we used a neural network for its capacity to model nonlinearity and interactions. We used convolutional layers, which aggregate neighboring information, into a neural network to account for spatial and temporal autocorrelation. We trained the neural network for the continental United States from 2000 to 2012 and tested it with left out monitors. Ten-fold cross-validation revealed a good model performance with a total R(2) of 0.84 on the left out monitors. Regional R(2) could be even higher for the…

The greater abundances of antibiotic resistance genes (ARGs) in point-of-use tap and reclaimed water than that in freshly treated water raise the question whether residual disinfectants in distribution systems facilitate the spread of ARGs. This study investigated three widely used disinfectants (free chlorine, chloramine, and hydrogen peroxide) on promoting ARGs transfer within Escherichia coli strains and across genera from Escherichia coli to Salmonella typhimurium . The results demonstrated that subinhibitory concentrations (lower than minimum inhibitory concentrations [MICs]) of these disinfectants, namely 0.1–1 mg/L Cl 2 for free chlorine, 0.1–1 mg/L Cl 2 for chloramine, and 0.24–3 mg/L H 2 O 2, led to concentration-dependent increases in intragenera conjugative transfer by 3.4–6.4, 1.9–7.5, and 1.4–5.4 folds compared with controls, respectively. By comparison, the intergenera conjugative frequencies were slightly increased by approximately 1.4–2.3 folds compared with controls. However, exposure to disinfectants concentrations higher than MICs significantly suppressed…

The prevalence of microplastics (<5 mm) in natural environments has become a widely recognized global problem. Microplastics have been shown to sorb chemical pollutants from their surrounding environment, thus raising concern as to their role in the movement of these pollutants through the food chain. This experiment investigated whether organic pollutants sorbed to microbeads (MBs) from personal care products were assimilated by fish following particle ingestion. Rainbow fish (Melanotaenia fluviatilis) were exposed to MBs with sorbed polybrominated diphenyl ethers (PBDEs; BDE-28, -47, -100, -99, -153, -154, -183, 200 ng g(-1); BDE-209, 2000 ng g(-1)) and sampled at 0, 21, 42, and 63 days along with two control treatments (food only and food + clean MBs). Exposed fish had significantly higher Σ8PBDE concentrations than both control treatments after just 21 days, and continued exposure resulted in increased accumulation of the pollutants over the experiment (ca. 115 pg g(-1) ww d(-1)). Lower brominated congeners showed the highest assimilation whereas higher brominated congeners did…

In drinking water distribution systems (DWDS), biofilms are the predominant mode of microbial growth, with the presence of extracellular polymeric substance (EPS) protecting the biomass from environmental and shear stresses. Biofilm formation poses a significant problem to the drinking water industry as a potential source of bacterial contamination, including pathogens, and, in many cases, also affecting the taste and odor of drinking water and promoting the corrosion of pipes. This article critically reviews important research findings on biofilm growth in DWDS, examining the factors affecting their formation and characteristics as well as the various technologies to characterize and monitor and, ultimately, to control their growth. Research indicates that temperature fluctuations potentially affect not only the initial bacteria-to-surface attachment but also the growth rates of biofilms. For the latter, the effect is unique for each type of biofilm-forming bacteria; ammonia-oxidizing bacteria, for example, grow more-developed biofilms at a typical summer temperature of 22 °C…

Analysis of environmental DNA (eDNA) to identify macroorganisms and biodiversity has the potential to significantly augment spatial and temporal biological monitoring in aquatic ecosystems. Current monitoring methods relying on the physical identification of organisms can be time consuming, expensive, and invasive. Measuring eDNA shed from organisms provides detailed information on the presence and abundance of communities of organisms. However, little is known about eDNA shedding and decay in aquatic environments. In the present study, we designed novel Taqman qPCR assays for three ecologically and economically important marine fish-Engraulis mordax (Northern Anchovy), Sardinops sagax (Pacific Sardine), and Scomber japonicas (Pacific Chub Mackerel). We subsequently measured fish eDNA shedding and decay rates in seawater mesocosms. eDNA shedding rates ranged from 165 to 3368 pg of DNA per hour per gram of biomass. First-order decay rate constants ranged from 0.055 to 0.101 per hour. We also examined the size fractionation of eDNA and concluded eDNA is both intra- and extracellular.…

Use of electronic cigarettes has grown exponentially over the past few years, raising concerns about harmful emissions. This study quantified potentially toxic compounds in the vapor and identified key parameters affecting emissions. Six principal constituents in three different refill "e-liquids" were propylene glycol (PG), glycerin, nicotine, ethanol, acetol, and propylene oxide. The latter, with mass concentrations of 0.4-0.6%, is a possible carcinogen and respiratory irritant. Aerosols generated with vaporizers contained up to 31 compounds, including nicotine, nicotyrine, formaldehyde, acetaldehyde, glycidol, acrolein, acetol, and diacetyl. Glycidol is a probable carcinogen not previously identified in the vapor, and acrolein is a powerful irritant. Emission rates ranged from tens to thousands of nanograms of toxicants per milligram of e-liquid vaporized, and they were significantly higher for a single-coil vs a double-coil vaporizer (by up to an order of magnitude for aldehydes). By increasing the voltage applied to a single-coil device from 3.3 to 4.8 V, the mass of e-liquid…

Synthetic textiles can shed numerous microfibers during conventional washing, but evaluating environmental consequences as well as source-control strategies requires understanding mass releases. Polyester apparel accounts for a large proportion of the polyester market, and synthetic jackets represent the broadest range in apparel construction, allowing for potential changes in manufacturing as a mitigation measure to reduce microfiber release during laundering. Here, detergent-free washing experiments were conducted and replicated in both front- and top-load conventional home machines for five new and mechanically aged jackets or sweaters: four from one name-brand clothing manufacturer (three majority polyester fleece, and one nylon shell with nonwoven polyester insulation) and one off-brand (100% polyester fleece). Wash water was filtered to recover two size fractions (>333 μm and between 20 and 333 μm); filters were then imaged, and microfiber masses were calculated. Across all treatments, the recovered microfiber mass per garment ranged from approximately 0 to 2 g, or exceeding…

In this study, FeCl3, AlCl3, CaCl2, and kaolinite were selected as model soil minerals and incubated with walnut shell derived biochar for 3 months and the incubated biochar was then separated for the investigation of biochar-mineral interfacial behavior using XRD and SEM-EDS. The XPS, TGA, and H2O2 oxidation were applied to evaluate effects of the interaction on the stability of biochar. Fe8O8(OH)8Cl1.35 and AlCl3·6H2O were newly formed on the biochar surface or inside of the biochar pores. At the biochar-mineral interface, organometallic complexes such as Fe-O-C were generated. All the 4 minerals enhanced the oxidation resistance of biochar surface by decreasing the relative contents of C-O, C═O, and COOH from 36.3% to 16.6-26.5%. Oxidation resistance of entire biochar particles was greatly increased with C losses in H2O2 oxidation decreasing by 13.4-79.6%, and the C recalcitrance index (R50,bicohar) in TGA analysis increasing from 44.6% to 45.9-49.6%. Enhanced oxidation resistance of biochar surface was likely due to the physical isolation from newly formed minerals, while…

Novel magnetic biochars (MBC) were prepared by one-step pyrolysis of FeCl 3 -laden biomass and employed for Hg 0 removal in simulated combustion flue gas. The sample characterization indicated that highly dispersed Fe 3 O 4 particles could be deposited on the MBC surface. Both enhanced surface area and excellent magnetization property were obtained. With the activation of FeCl 3, more oxygen-rich functional groups were formed on the MBC, especially the C═O group. The MBC exhibited far greater Hg 0 removal performance compared to the nonmagnetic biochar (NMBC) under N 2 + 4% O 2 atmosphere in a wide reaction temperature window (120–250 °C). The optimal pyrolysis temperature for the preparation of MBC is 600 °C, and the best FeCl 3 /biomass impregnation mass ratio is 1.5 g/g. At the optimal temperature (120 °C), the Fe 1.5 MBC 600 was superior in both Hg 0 adsorption capacity and adsorption rate to a commercial brominated activated carbon (Br-AC) used for mercury removal in power plants. The mechanism of Hg 0 removal was proposed, and there are two types of active adsorption/oxidation…

Emissions from biomass burning are a significant source of brown carbon (BrC) in the atmosphere. In this study, we investigate the molecular composition of freshly emitted biomass burning organic aerosol (BBOA) samples collected during test burns of sawgrass, peat, ponderosa pine, and black spruce. We demonstrate that both the BrC absorption and the chemical composition of light-absorbing compounds depend significantly on the type of biomass fuels. Common BrC chromophores in the selected BBOA samples include nitro-aromatics, polycyclic aromatic hydrocarbon derivatives, and polyphenols spanning a wide range of molecular weights, structures, and light absorption properties. A number of biofuel-specific BrC chromophores are observed, indicating that some of them may be used as source-specific markers of BrC. On average, ∼50% of the light absorption in the solvent-extractable fraction of BBOA can be attributed to a limited number of strong BrC chromophores. The absorption coefficients of BBOA are affected by solar photolysis. Specifically, under typical atmospheric conditions, the 300…

Combining two solutions of different composition releases the Gibbs free energy of mixing. By using engineered processes to control the mixing, chemical energy stored in salinity gradients can be harnessed for useful work. In this critical review, we present an overview of the current progress in salinity gradient power generation, discuss the prospects and challenges of the foremost technologies - pressure retarded osmosis (PRO), reverse electrodialysis (RED), and capacitive mixing (CapMix) and provide perspectives on the outlook of salinity gradient power generation. Momentous strides have been made in technical development of salinity gradient technologies and field demonstrations with natural and anthropogenic salinity gradients (for example, seawater-river water and desalination brine-wastewater, respectively), but fouling persists to be a pivotal operational challenge that can significantly ebb away cost-competitiveness. Natural hypersaline sources (e.g., hypersaline lakes and salt domes) can achieve greater concentration difference and, thus, offer opportunities to overcome…

Air pollution contributes to the premature deaths of millions of people each year around the world, and air quality problems are growing in many developing nations. While past policy efforts have succeeded in reducing particulate matter and trace gases in North America and Europe, adverse health effects are found at even these lower levels of air pollution. Future policy actions will benefit from improved understanding of the interactions and health effects of different chemical species and source categories. Achieving this new understanding requires air pollution scientists and engineers to work increasingly closely with health scientists. In particular, research is needed to better understand the chemical and physical properties of complex air pollutant mixtures, and to use new observations provided by satellites, advanced in situ measurement techniques, and distributed micro monitoring networks, coupled with models, to better characterize air pollution exposure for epidemiological and toxicological research, and to better quantify the effects of specific source sectors and…

Previous research has shown that desktop 3D printers can emit large numbers of ultrafine particles (UFPs, particles less than 100 nm) and some hazardous volatile organic compounds (VOCs) during printing, although very few filament and 3D printer combinations have been tested to date. Here we quantify emissions of UFPs and speciated VOCs from five commercially available filament extrusion desktop 3D printers utilizing up to nine different filaments by controlled experiments in a test chamber. Median estimates of time-varying UFP emission rates ranged from ∼10(8) to ∼10(11) min(-1) across all tested combinations, varying primarily by filament material and, to a lesser extent, bed temperature. The individual VOCs emitted in the largest quantities included caprolactam from nylon-based and imitation wood and brick filaments (ranging from ∼2 to ∼180 μg/min), styrene from acrylonitrile butadiene styrene (ABS) and high-impact polystyrene (HIPS) filaments (ranging from ∼10 to ∼110 μg/min), and lactide from polylactic acid (PLA) filaments (ranging from ∼4 to ∼5 μg/min). Results from a…

High Resolution Image Download MS PowerPoint Slide New scientific understanding is catalyzed by novel technologies that enhance measurement precision, resolution or type, and that provide new tools to test and develop theory. Over the last 50 years, technology has transformed the hydrologic sciences by enabling direct measurements of watershed fluxes (evapotranspiration, streamflow) at time scales and spatial extents aligned with variation in physical drivers. High frequency water quality measurements, increasingly obtained by in situ water quality sensors, are extending that transformation. Widely available sensors for some physical (temperature) and chemical (conductivity, dissolved oxygen) attributes have become integral to aquatic science, and emerging sensors for nutrients, dissolved CO 2, turbidity, algal pigments, and dissolved organic matter are now enabling observations of watersheds and streams at time scales commensurate with their fundamental hydrological, energetic, elemental, and biological drivers. Here we synthesize insights from emerging technologies across a suite…

Rapid economic growth, industrialization, and urbanization in China have led to extremely severe air pollution that causes increasing negative effects on human health, visibility, and climate change. However, the influence mechanisms of these anthropogenic factors on fine particulate matter (PM 2.5 ) concentrations are poorly understood. In this study, we combined panel data and econometric methods to investigate the main anthropogenic factors that contribute to increasing PM 2.5 concentrations in China at the prefecture level from 1999 to 2011. The results showed that PM 2.5 concentrations and three anthropogenic factors were cointegrated. The panel Fully Modified Least Squares and panel Granger causality test results indicated that economic growth, industrialization, and urbanization increased PM 2.5 concentrations in the long run. The results implied that if China persists in its current development pattern, economic growth, industrialization and urbanization will inevitably lead to increased PM 2.5 emissions in the long term. Industrialization was the principal factor that…

T he global threat of highly persistent plastic waste accumulating and fragmenting in the world's oceans, inland waters and terrestrial environments is becoming increasingly evident.[1][2][3] Humans are being exposed to both plastic particles and chemical additives being released from the plastic debris of consumer society.This material is fragmenting, leaching and spreading throughout the biosphere, including indoor and outdoor air, soil, and water systems.What started as a marine environmental contamination issue is in fact very much a human health issue as well.What do we know so far about the impacts of this plastic debris for humans?Humans can be exposed to plastic particles via consumption of seafood and terrestrial food products, drinking water and via the air.1,4 Uptake of plastics by humans (and animals) can cause adverse health effects by at least three possible means:

Zero-valent iron nanoparticles (nZVI) synthesized in the presence of reduced sulfur compounds have been shown to degrade trichloroethene (TCE) at significantly higher rates. However, the applicability of sulfidation as a general means to enhance nZVI reactivity under different particle preparation conditions and the underlying cause for this enhancement effect are not well understood. In this study, the effects of sulfidation reagent, time point of sulfidation, and sulfur loading on the resultant particles were assessed through TCE degradation experiments. Up to 60-fold increase in TCE reaction rates was observed upon sulfidation treatment, with products being fully dechlorinated hydrocarbons. While the reactivity of these sulfur-treated nZVI (S-nZVI) was relatively unaffected by the sulfidation reagent (viz., sodium sulfide, dithionite, or thiosulfate) or the sequence of sulfidation relative to iron reduction, TCE reaction rates were found to depend strongly on sulfur to iron ratio. At a low sulfur loading, TCE degradation was accelerated with increasing sulfur dose. The rate…

This study evaluates the PM2.5 pollution-related health impacts on the national and provincial economy of China using a computable general equilibrium (CGE) model and the latest nonlinear exposure-response functions. Results show that the health and economic impacts may be substantial in provinces with a high PM2.5 concentration. In the WoPol scenario without PM2.5 pollution control policy, we estimate that China experiences a 2.00% GDP loss and 25.2 billion USD in health expenditure from PM2.5 pollution in 2030. In contrast, with control policy in the WPol scenario, a control investment of 101.8 billion USD (0.79% of GDP) and a gain of 1.17% of China's GDP from improving PM2.5 pollution are projected. At the provincial level, GDP loss in 2030 in the WoPol scenario is high in Tianjin (3.08%), Shanghai (2.98%), Henan (2.32%), Beijing (2.75%), and Hebei (2.60%) and the top five provinces with the highest additional health expenditure are Henan, Sichuan, Shandong, Hebei, and Jiangsu. Controlling PM2.5 pollution could bring positive benefits in two-thirds of provinces. Tianjin,…

Microporous membranes fabricated from hydrophobic polymers such as polyvinylidene fluoride (PVDF) have been widely used for membrane distillation (MD). However, hydrophobic MD membranes are prone to wetting by low surface tension substances, thereby limiting their use in treating challenging industrial wastewaters, such as shale gas produced water. In this study, we present a facile and scalable approach for the fabrication of omniphobic polyvinylidene fluoride (PVDF) membranes that repel both water and oil. Positive surface charge was imparted to an alkaline-treated PVDF membrane by aminosilane functionalization, which enabled irreversible binding of negatively charged silica nanoparticles (SiNPs) to the membrane through electrostatic attraction. The membrane with grafted SiNPs was then coated with fluoroalkylsilane (perfluorodecyltrichlorosilane) to lower the membrane surface energy. Results from contact angle measurements with mineral oil and surfactant solution demonstrated that overlaying SiNPs with ultralow surface energy significantly enhanced the wetting resistance of the…

We evaluated both the spatial distribution of gadolinium (Gd) and other rare earth elements (REE) in surface waters collected in a transect of San Francisco Bay (SFB) and their temporal variations within the Bay over two decades. The REE were preconcentrated using the NOBIAS PA-1 resin prior to analysis by high-resolution inductively coupled plasma mass spectrometry. Measurements revealed a temporal increase in the Gd anomaly in SFB from the early 1990s to the present. The highest Gd anomalies were observed in the southern reach of SFB, which is surrounded by several hospitals and research centers that use Gd-based contrast agents for magnetic resonance imaging. Recent increases in that usage presumably contributed to the order of magnitude increase in anthropogenic Gd concentrations in SFB, from 8.27 to 112 pmol kg(-1) over the past two decades, and reach the northeast Pacific coastal waters. These measurements (i) show that "exotic" trace elements used in new high-tech applications, such as Gd, are emerging contaminants in San Francisco Bay and that anthropogenic Gd concentrations…

MOx/ABO3 is a promising catalyst for the high-efficiency removal of volatile organic compounds. However, this catalyst is limited on practical applications due to its complex synthesis procedure and high cost. In this work, the MnO2/LaMnO3 catalyst was prepared in situ using a facile one-step method for the first time, in which partial La cations were selectively removed from three dimensionally chain-like ordered macroporous (3DOM) LaMnO3 material. After selective removal, the obtained MnO2/LaMnO3 sample expressed an excellent catalytic performance on toluene oxidation. Toluene could be completely oxidized into CO2 and H2O at 290 °C over the MnO2/LaMnO3 catalyst with a toluene/oxygen molar ratio of 1/100 and a space velocity of 120 000 mL/(g h). In addition, the apparent activation energy value of MnO2/LaMnO3 was 57 kJ/mol, which was lower than those of other metal oxides catalysts. According to O2-TPD and XPS results, it is concluded that the high catalytic performance of MnO2/LaMnO3 was mainly associated with the large amount of oxygen species and the excellent lattice oxygen…

The incomplete mass-balance of organic fluorine in human serum indicates the existence of unknown per- and polyfluoroalkyl substances (PFASs) with persistent and bioaccumulative properties. Here we characterized human exposure and elimination kinetics of chlorinated polyfluoroalkyl ether sulfonic acids (Cl-PFESAs) in metal plating workers (n = 19), high fish consumers (n = 45), and background controls (n = 8). Cl-PFESAs were detected in >98% of the sampled individuals with serum concentrations ranging <0.019-5040 ng/mL. Statistically higher median serum levels were observed in high fish consumers (93.7 ng/mL) and metal plating workers (51.5 ng/mL) compared to the background control group (4.78 ng/mL) (Kruskal-Wallis rank sum test, p < 0.01). Cl-PFESAs could account for 0.269 to 93.3% of ∑PFASs in human serum indicating that this compound class may explain a substantial fraction of previously unidentified organic fluorine in the Chinese population. Estimated half-lives for renal clearance (median 280 years; range 7.1-4230 years) and total elimination (median 15.3 years; range…