The 50 most-cited articles in Optics Letters, 2018

We demonstrate robust soliton crystals generation with a fixed frequency pump laser through a thermoelectric-cooler-based thermal-tuning approach in a butterfly-packaged complementary-metal-oxide-semiconductor-compatible microresonator. Varieties of soliton crystal states, exhibiting "palm-like" optical spectra that result from the strong interactions between the dense soliton ensembles and reflect their temporal distribution directly, are experimentally observed by sweeping one cavity resonance across the pump frequency from the blue-detuned side by reducing the operating temperature of the resonator. Benefitting from the tiny intra-cavity energy change, repeatable interconversion between the chaotic modulation instability and stable soliton crystal states can be successfully achieved via simple tuning of the temperature or pump power, showing the easy accessibility and excellent stability of such soliton crystals. This work could facilitate microresonator-based optical frequency combs towards a portable, adjustable, and low-cost system while avoiding the requirements of delicate…

We report the demonstration of a 2824 nm passively cooled erbium-doped fluoride fiber laser delivering a record average output power of 41.6 W in continuous-wave operation. The splice-less cavity is based on intra-core fiber Bragg gratings written directly in the active erbium-doped fluoride fiber, which is bidirectionally pumped at 980 nm to reduce heat load. To the best of our knowledge, this result is the highest average output power achieved with a mid-infrared fiber laser. The long-term performance of different protective endcaps is also investigated at high-power operation.

Highly sensitive and miniaturized sensors are highly desirable for real-time analyte/sample detection. In this Letter, we propose a highly sensitive plasmonic sensing scheme with the miniaturized photonic crystal fiber (PCF) attributes. A large cavity is introduced in the first ring of the PCFs for the efficient field excitation of the surface plasmon polariton mode and proficient infiltration of the sensing elements. Due to the irregular air-hole diameter in the first ring, the cavity exhibits the birefringence behavior which enhances the sensing performance. The novel plasmonic material gold has been used considering the chemical stability in an aqueous environment. The guiding properties and the effects of the sensing performance with different parameters have been investigated by the finite element method, and the proposed PCFs have been fabricated using the stack-and-draw fiber drawing method. The proposed sensor performance was investigated based on the wavelength and amplitude sensing techniques and shows the maximum sensitivities of 11,000 nm/RIU and 1,420 RIU−1,…

We report on the laser pulse output of 339 J centered at 800 nm from a chirped-pulse amplification (CPA) Ti:sapphire laser system at the Shanghai Superintense Ultrafast Laser Facility. The experimental results demonstrated that the parasitic lasing as well as the transverse amplified spontaneous emission of the homemade 235-mm-diameter Ti:sapphire final amplifier were suppressed successfully via the temporal dual-pulse pumped scheme and the index-matching liquid cladding technique. The maximum pump-to-signal conversion efficiency of 32.1% was measured for the final amplifier. With a compressor transmission efficiency of 64% and a compressed pulse duration of 21 fs obtained for the sample light at a lower energy level, this laser system could potentially generate a compressed laser pulse with a peak power of 10.3 PW. The experimental results represent significant progress with respect to the CPA laser.

We design and numerically analyze a high-quality (Q)-factor, high modulation depth, multiple Fano resonance device based on periodical asymmetric paired bars in the near-infrared regime. There are four sharp Fano peaks arising from the interference between subradiant modes and the magnetic dipole resonance mode that can be easily tailored by adjusting different geometric parameters. The maximal Q-factor can exceed 105 in magnitude, and the modulation depths ΔT can reach nearly 100%. Combining the narrow resonance line-widths with strong near-field confinement, we demonstrate an optical refractive index sensor with a sensitivity of 370 nm/RIU and a figure of merit of 2846. This study may provide a further step in sensing, lasing, and nonlinear optics.

In this work, we reported on high-brightness Eu3+-activated Ca3Lu(AlO)3(BO3)4 (CLAB) red-emitting phosphors. Under 397 nm excitation, the CLAB:Eu3+ phosphors showed intense red emissions at around 621 nm with CIE coordinates of (0.657, 0.343). The optimal doping concentration of Eu3+ ions was found to be 30 mol. %, and the CLAB:0.3Eu3+ sample possessed high-color purity of 93% and ultra-high internal quantum efficiency as great as 98.5%. Importantly, the CLAB:0.3Eu3+ also had good thermal stability. Finally, a white-light-emitting diode (WLED) lamp with good color-rendering index was fabricated by using a 365 nm ultraviolet chip and the phosphor blends of CLAB:0.3Eu3+ red-emitting phosphors, (Ba,Sr)2SiO4:Eu2+ green-emitting phosphors, and BaMgAl10O7:Eu2+ blue-emitting phosphors.

We report on the fabrication of crystalline lithium niobate microresonators with quality factors above 107, as measured around 770 nm wavelength. Our technique relies on femtosecond laser micromachining for patterning a mask coated on the lithium niobate on insulate (LNOI) into a microdisk, followed by a chemo-mechanical polishing process for transferring the disk-shaped pattern to the LNOI. Nonlinear processes including second-harmonic generation and Raman scattering have been demonstrated in the fabricated microdisk.

For large amounts of wavefront error, gradient-based optimization methods for image-based wavefront sensing are unlikely to converge when the starting guess for the wavefront differs greatly from the true wavefront. We use machine learning operating on a point-spread function to determine a good initial estimate of the wavefront. We show that our trained convolutional neural network provides good initial estimates in the presence of simulated detector noise and is more effective than using many random starting guesses for large amounts of wavefront error.

We report on the first experimental observation, to the best of our knowledge, of soliton molecules in a spatiotemporal mode-locked multimode fiber (MMF) laser. By adjusting the waveplates inside the cavity, not only the spatiotemporal mode-locking state with a stable single pulse but also soliton molecules are observed. Various soliton molecules, including soliton pairs, soliton triplets, and soliton quartets with different pulse separations, are achieved. Transition of different operation states with pump power is given. The results would be beneficial for further understanding of the nonlinear dynamics in spatiotemporal mode-locked MMF lasers.

We present, to the best of our knowledge, the first demonstration of mid-infrared supercontinuum (SC) tissue imaging at wavelengths beyond 5 μm using a fiber-coupled SC source spanning 2–7.5 μm. The SC was generated in a tapered large-mode-area chalcogenide photonic crystal fiber in order to obtain broad bandwidth, high average power, and single-mode output for diffraction-limited imaging performance. Tissue imaging was demonstrated in transmission at selected wavelengths between 5.7 (1754 cm−1) and 7.3 μm (1370 cm−1) by point scanning over a sub-millimeter region of colon tissue, and the results were compared to images obtained from a commercial instrument.

For the first time, to the best of our knowledge, we experimentally demonstrate a successful 30-Gb/s signal transmission of a duobinary message hidden in a chaotic optical carrier over 100-km fiber. Thanks to the duobinary modulation format with high spectral efficiency, the 30-Gb/s signal can be encrypted by a 10-GHz-wide chaotic carrier. A digital signal processing technique can be used to convert duobinary data into binary data on the receiver side. This proposal lowers the requirement for wideband chaos generation and synchronization in high-speed long-distance chaotic optical communications, and fiber dispersion compensation can also be simplified, which has potential to be used in high-speed long-distance secure optical communications.

We introduce a new class of (2+1) dimensional circle Pearcey beams (CPBs) with the abruptly autofocusing (AAF) characteristics. Compared with circular Airy beams, CPBs can increase the peak intensity contrast, shorten the focus distance and, especially, eliminate the oscillation after the focal point. Furthermore, we discuss the influence of the optical vortices (including on-axis, off-axis, and vortex pairs) on the light intensity distribution of the CPBs during propagating.

In this Letter, we report on the generation of 1060 W average power from an ultrafast thulium-doped fiber chirped pulse amplification system. After compression, the pulse energy of 13.2 μJ with a pulse duration of 265 fs at an 80 MHz pulse repetition rate results in a peak power of 50 MW spectrally centered at 1960 nm. Even though the average heat-load in the fiber core is as high as 98 W/m, we confirm the diffraction-limited beam quality of the compressed output. Furthermore, the evolution of the relative intensity noise with increasing average output power has been measured to verify the absence of transversal mode instabilities. This system represents a new average power record for thulium-doped fiber lasers (1150 W uncompressed) and ultrashort pulse fiber lasers with diffraction-limited beam quality, in general, even considering single-channel ytterbium-doped fiber amplifiers.

We demonstrate a highly sensitive and stable fiber-optic Fabry–Perot cantilever microphone based on fast demodulated white-light interferometry. The cavity length of the low-finesse Fabry–Perot interferometry is absolutely measured by realizing a high-speed demodulation method utilizing a full spectrum, with the advantages of both high resolution and large dynamic range. An acoustic test demonstrates high sensitivities and linear responsivities at frequencies below 2 kHz. The pressure responsivity and the noise-limited minimum detectable acoustic pressure level are measured to be 211.2 nm/Pa and 5 μPa/Hz1/2, respectively, at the frequency of 1 kHz. Comparative experimental results show that the signal-to-noise ratio is over 10 times higher than a reference condenser microphone.

In this Letter, we report a novel NaLaMgWO6:Mn4+ double-perovskite phosphor. Under the excitation at 342 nm, this phosphor showed a high-efficiency far-red emission at approximately 700 nm with internal quantum efficiency of up to 60%. Moreover, it exhibited a high thermal stability; the emission intensity at 423 k was approximately 57% of that at room temperature. Finally, a prototype light-emitting diode (LED) device was fabricated using the combination of a NaLaMgWO6:Mn4+ far-red-emitting phosphor and 365-nm LED chip.

We propose a Maxwellian near-to-eye display implemented using a multiplexed holographic optical element. Maxwellian configuration removes the focal cue of the displayed virtual image completely, presenting an always-focused image to the observer regardless of the focal length of the eye. The transparent property of the holographic optical element enables the optical see-through feature, making the proposed near-to-eye display suitable for augmented reality applications. The multiplexing of multiple concave mirrors into a single holographic optical element enlarges the effective eyebox, relaxing the limitation of the conventional Maxwellian displays. Optical experiment confirms that the proposed display can present always-focused images on top of the real environment with 9.2°(H)×5.2°(V) field of view, and 9 mm (H)×3 mm (V) eyebox.

The question of how the orbital angular momentum of structured light might engage with chiral matter is a topic of resurgent interest. By taking account of electric quadrupole transition moments, it is shown that the handedness of the beam can indeed be exhibited in local chiral effects, being dependent on the sign of the topological charge. In the specific case of absorption, a significant interplay of wavefront structure and polarization is resolved, and clear differences in behavior are identified for systems possessing a degree of orientational order and for those that are randomly oriented.

We hereby proposed and experimentally demonstrated an active polarization imaging technique, based on wavelength selection, for seeing through highly turbid water where targets are always visually lost. The method was realized by making use of the dependence of light scattering on wavelength in turbid water. Red light illumination was selected to minimize scattering occurring in light propagation and to guarantee accurate estimation of degree of polarization. Experiments demonstrate its contribution to turn targets in highly turbid water from "undetectable" to "detectable."

We introduce the concept of the inverse prism as the dual of the conventional prism and deduce from this duality an implementation of it based on temporal discontinuity and spatial dispersion provided by anisotropy. Moreover, we show that this inverse prism exhibits the following three unique properties: chromatic refraction birefringence, ordinary monochromatic and extraordinary polychromatic temporal refraction, and linear-to-Lissajous polarization transformation.

We design an optical feedback network making use of machine learning (ML) techniques and demonstrate via simulations its ability to correct for the effects of turbulent propagation on optical modes. This artificial neural network scheme relies only on measuring the intensity profile of the distorted modes, making the approach simple and robust. The network results in the generation of various mode profiles at the transmitter that, after propagation through turbulence, closely resemble the desired target mode. The corrected optical mode profiles at the receiver are found to be nearly identical to the desired profiles, with near-zero mean square error indices. We are hopeful that the present results combining the fields of ML and optical communications will greatly enhance the robustness of free-space optical links.

We demonstrate a mid-infrared dysprosium-doped fluoride fiber laser with a continuously tunable output range of 573 nm, pumped by a 1.7 μm Raman fiber laser. To the best of our knowledge, this represents the largest tuning range achieved to date from any rare-earth-doped fiber laser and, critically, spans the 2.8-3.4 μm spectral region, which contains absorption resonances of many important functional groups and is uncovered by other rare-earth ions. Output powers up to 170 mW are achieved, with 21% slope efficiency. We also discuss the relative merits of the 1.7 μm pump scheme, including possible pump excited-state absorption.

Chip-scale mode-locked dissipative Kerr solitons have been realized on various materials platforms, making it possible to achieve a miniature, highly coherent frequency comb source with high repetition rates. Aluminum nitride (AlN), an appealing nonlinear optical material having both Kerr (χ3), and Pockels (χ2) effects, has immerse potential for comb self-referencing without the need for external harmonic generators. However, cavity soliton states have not yet been achieved in AlN microresonators. Here, we demonstrate mode-locked Kerr cavity soliton generation in a crystalline AlN microring resonator. By utilizing ultrafast tuning of the pump frequency through single-sideband modulation, in combination with an optimized wavelength scan and pump power-ramp patterns, we can deterministically elongate a ∼400 ns short-lived soliton to a time span as long as we wish to hold it.

Nonlinear compression of laser pulses with tens of millijoule energy in a gas-filled multipass cell is a promising approach to realize a new generation of high average power femtosecond sources. For the first time, to the best of our knowledge, we demonstrate nonlinear broadening of pulses with about 18 mJ of energy at a 5 kHz repetition rate in an argon-filled Herriott cell and show compressibility from 1.3 ps to 41 fs. In addition to the large compression factor, the output beam has an outstanding quality and excellent spectral homogeneity. Furthermore, we discuss prospects to scale the energy to the 100 mJ level in the near future.

The space domain is regarded as the only known physical dimension of lightwaves left to be exploited for optical communications. Very recently, much research effort has been devoted to using orbital angular momentum (OAM) spatial modes to increase the transmission capacity in fiber-optic communications. However, long-distance low-crosstalk high-order OAM multiplexing transmission in fiber is quite challenging. Here we design and fabricate a graded-index ring-core fiber to effectively suppress radially high-order modes and greatly separate high-order OAM mode groups. By exploiting high-order OAM mode group multiplexing, together with wavelength-division multiplexing (WDM), i.e., 12.5 Gbaud 8-array quadrature amplitude modulation (8-QAM) signals over OAM+4 and OAM+5 modes on 112 WDM channels (224 individual channels), we experimentally demonstrate 8.4 Tbit/s data transmission in an 18 km OAM fiber with low crosstalk. Multiple-input multiple-output digital signal processing is not required in the experiment because of the large high-order mode group separation of the OAM fiber. The…

We report the generation of 63 J of broadband pulse energies at 0.1 Hz from the J-KAREN-P laser, which is based on an OPCPA/Ti:sapphire hybrid architecture. Pulse compression down to 30 fs indicates a peak power of over 1 PW. High temporal contrast of 1012 prior to the main pulse has been demonstrated with 10 J output energy. High intensities of 1022 W/cm2 on target by focusing a 0.3 PW laser with an f/1.3 off-axis parabolic mirror have been achieved. Fundamental processes of laser matter interaction at over 1022 W/cm2 intensities belong to a new branch of science that will be the principal research task of our infrastructure.

It is well known that electromagnetic radiation propagates along a straight line, but this common sense was broken by the artificial curved light-the Airy beam. In this Letter, we demonstrate a new type of curved light beam besides the Airy beam, the so-called "photonic hook." This photonic hook is a curved high-intensity focus by a dielectric trapezoid particle illuminated by a plane wave. The difference between the phase velocity and the interference of the waves inside the particle causes the phenomenon of focus bending.

The photonic spin Hall effect in transmission is a transverse beam shift of the out-coming beam depending on polarization of the incoming beam. The effect can be significantly enhanced by materials with high anisotropy. We report, to the best of our knowledge, the first experimental demonstration of the photonic spin Hall effect in a multilayer hyperbolic metamaterial at visible wavelengths (wavelengths of 520 and 633 nm). The metamaterial is composed of alternating layers of gold and alumina with deeply subwavelength thicknesses, exhibiting extremely large anisotropy. The angle-resolved polarimetric measurements showed the shift of 165 μm for the metamaterial of 176 nm in thickness. Additionally, the transverse beam shift is extremely sensitive to the variations of the incident angle changing theoretically by 270 μm with 1 milli-radian (0.057°). These features can lead to minituarized spin Hall switches and filters with high angular resolution.

We demonstrate a fiber oscillator that achieves 3 MW peak power, is easily started, and is environmentally stable. The Mamyshev oscillator delivers 190-nJ pulses that can be compressed externally to 35 fs duration. Accurate numerical modeling of the gain medium provides insight into the behavior and performance of the device.

An end-to-end deep neural network, ResU-net, is developed for quantitative photoacoustic imaging. A residual learning framework is used to facilitate optimization and to gain better accuracy from considerably increased network depth. The contracting and expanding paths enable ResU-net to extract comprehensive context information from multispectral initial pressure images and, subsequently, to infer a quantitative image of chromophore concentration or oxygen saturation (sO2). According to our numerical experiments, the estimations of sO2 and indocyanine green concentration are accurate and robust against variations in both optical property and object geometry. An extremely short reconstruction time of 22 ms is achieved.

We demonstrate nonlinear temporal compression of a high-energy Yb-doped fiber laser source in a multipass cell filled with argon. The 160 μJ 275 fs input pulses are compressed down to 135 μJ 33 fs at the output, corresponding to an overall transmission of 85%. We also analyze the output beam, revealing essentially no space-time couplings. We believe this technique can be scalable to higher pulse energies and shorter pulse durations, enabling access to a wider parameter range for a large variety of ultrafast laser sources.

In this Letter, we demonstrate polarization volume grating (PVG)-based couplers for a double-layer waveguide display to realize a full-color near-eye display. The polarized interference exposure with photo-alignment methods was employed to generate a birefringent spiral configuration with two-dimensional periodicity in a chiral-dopant reactive mesogen material. Such a structure presents a unique highly efficient single-order Bragg diffraction with polarized selectivity. The prepared PVG couplers exhibited over 80% diffraction efficiency with large diffraction angles at spectra of blue (457 nm), green (532 nm), and red (630 nm). The demonstrated waveguide prototype showed a full-color display with a diagonal field of view of around 35°. The overall optical efficiency was measured as high as 118.3 cd/m2 per lumen with a transparency of 72% for ambient light.

In this work, we present a nonlinear spectral broadening and compression scheme based on self-phase modulation in bulk media inside a Herriott-type multipass cell. With this reliable approach, we achieved a spectral broadening factor of 22 while maintaining an efficiency of over 60% at an average input power of 100 W, and an excellent output beam quality with M2=1.2. The output pulses were compressed to 18 fs, with the broadest spectrum supporting a Fourier-transform limit of 10 fs. The high efficiency and approximately four-optical-cycle pulse duration mark an important milestone towards the realization of a compact, high power oscillator-based driver for XUV frequency combs and other nonlinear processes.

We analyze the performance of a reservoir computer based on time-delay feedback and optical injection, which is drawing benefits from the high-speed polarization dynamics of a vertical cavity surface emitting laser. We show that such a system has high computation performance and yields deeper memory than an existing single-mode laser-based reservoir computer. Performance is demonstrated on several benchmarking tasks. In particular, the error rate is an order of magnitude smaller when performing channel equalization.

We demonstrate a chip-scale autostereoscopic image projection system that utilizes a system of multiple integrated visible light optical phased arrays to reconstruct virtual light fields. Each phased array in this system serves as a micro-projector that illuminates the desired virtual object from a different angle. This recreates the virtual object in space with continuous parallax observable by the human visual system. In this work, a static virtual image with horizontal parallax and a viewing angle of 5° was generated with an array of 16 integrated silicon nitride phased arrays with a 635 nm operating wavelength. Each phased array is comprised of 32×32 optical antennas with passively encoded relative phases. The presented device demonstrates the promise of integrated visible light phased array platforms for implementing projection-based autostereoscopic displays in compact chip-scale platforms suitable for mobile devices.

We demonstrate an all-fiber supercontinuum source that generates a continuous spectrum from 1.6 μm to >11 μm with 417 mW on-time average power at 33% duty cycle. By utilizing a master oscillator power amplifier pump with three amplification stages and concatenating solid core ZBLAN, arsenic sulfide, and arsenic selenide fibers, we shift 1550 nm light to ∼4.5 μm, ∼6.5 μm, and >11 μm, respectively. With 69 mW past 7.5 μm, this source provides both high power and broad spectral expansion, while outputting a single fundamental mode.

Single-shot phase-shifting incoherent digital holography with multiplexed checkerboard phase gratings is proposed for acquiring holograms of moving objects. The gratings presented here play the following three roles: dividing the beams, modulating the curvature of spherical beams, and introducing different phase shifts. With the gratings of our proposed method, four individual holograms of a spatially incoherent light are formed on an image sensor. Therefore, it is possible to simultaneously capture four holograms and implement a phase-shifting technique. A proof-of-principle experiment was conducted to show the feasibility of the proposed method.

A simple imaging system, together with complex semidefinite programming, is used to generate the transmission matrix (TM) of a multimode fiber. Once the TM is acquired, we can modulate the phase of the input signal to induce strong mode interference at the fiber output. The optical design does not contain a reference arm, no internal reference signal is used, and no interferometric measurements are required. We use a phase-only spatial light modulator to shape the profile of the propagating modes, and the output intensity patterns are collected. The semidefinite program uses a convex optimization algorithm to generate the TM of the optical system using intensity only measurements. This simple, yet powerful, method can be used to compensate for modal dispersion in multimode fiber communication systems. It also yields great promise for the next generation biomedical imaging, quantum communication, and cryptography.

A novel mode-locking method based on the nonlinear multimode interference in the stretched graded-index multimode optical fiber (GIMF) is proposed in this Letter. The simple device geometry, where the light is coupled in and out of the stretched GIMF via single-mode fibers, is demonstrated to exhibit the temporal intensity discrimination required for mode locking. The nonlinear saturable absorber (SA) characteristics of the device are controllable by simply adjusting the strength of the stretching applied. The modulation depth of the device, which consists of ∼23.5 cm GIMF, is tuned from 10.37% to 22.27%. Such a simple SA enables the wavelength-switchable mode-locking operation in a ring Er-doped fiber laser, and ultrafast pulses with a pulse width of 506 fs at 1572.5 nm and 416 fs at 1591.4 nm were generated. The versatility and simplicity of the SA device, together with the possibility of scaling the pulse energy, make it highly attractive in ultrafast photonics.

Optical emission from rare-earth-doped fluoride fibers has thus far been limited to less than 4 μm. We extend emission beyond this limit by employing an indium fluoride (InF3) glass fiber as the host, which exhibits an increased infrared transparency over commonly used zirconium fluoride (ZBLAN). Near-infrared pumping of a dysprosium-doped InF3 fiber results in broad emission centered around 4.3 μm, representing the longest emission yet achieved from a fluoride fiber. The first laser emission in an InF3 fiber is also demonstrated from the 3 μm dysprosium transition. Finally, a frequency domain excited state lifetime measurement comparison between fluoride hosts suggests that multiphonon effects are significantly reduced in indium fluoride fiber, paving the way to more efficient, longer wavelength lasers compared to ZBLAN fibers.

For the first time, to the best of our knowledge, we observed the pulsating dissipative solitons in a mode-locked fiber laser at normal dispersion using the dispersive-Fourier transformation technology. The artificial saturable absorbers, as well as the birefringent filter formed by the nonlinear polarization rotation, make the polarization controller an effective component to adjust the laser state from stationary to pulsating. The pulsating dissipative solitons are accompanied with the spectrum breathing and oscillating structures due to the nonlinear pulse propagation. Our results can enhance the understanding of the pulsating solitons in the dissipative systems.

We propose and experimentally demonstrate a new concept of endo-microscopy: compressive multimode (MM) fiber imaging. We show that the speckle patterns generated in a MM fiber represent an excellent basis for compressive sensing. We demonstrate high-resolution compressive imaging through a fiber probe with the total number of measurements 20 times less than what is required for the standard raster scanning approach to endo-microscopy. Moreover, we show that the inherent optical sectioning of a MM fiber can help to overcome the main problem of compressive sensing and can be used for the imaging of bulk structures. Compressive MM fiber imaging does not require complex wavefront shaping and significantly increases the pre-calibration and imaging speed, creating a new approach to endo-microscopy.

<1.24·1.10), and the relative intensity noise is as low as 1% in the frequency span from 1 Hz to 1 MHz. The system is turn-key operable, as it features an automated spatial and temporal alignment of the interferometric amplification channels.

We present a single-shot quantitative phase imaging (QPI) method based on color-multiplexed Fourier ptychographic microscopy (FPM). Three light-emitting diode (LED) elements with respective R/G/B channels in a programmable LED array illuminate the specimen simultaneously, providing triangle oblique illuminations matching the numerical aperture of the objective precisely. A color image sensor records the light transmitted through the specimen, and three monochromatic intensity images at each color channel are then separated and utilized to recover the phase of the specimen. After one-step deconvolution based on the phase contrast transfer function, the obtained initial phase map is further refined by the FPM-based iterative recovery algorithm to overcome pixel-aliasing and improve the phase recovery accuracy. The high-speed, high-throughput QPI capabilities of the proposed approach are demonstrated by imaging HeLa cells mitosis in vitro, achieving a half-pitch resolution of 388 nm across a wide field of view of 1.33 mm2 at camera-limited frame rates (50 fps).

A dual-off-axis pumping scheme is presented to generate wavelength-tunable high-order Hermite–Gaussian (HG) modes in Yb:CaGdAlO4 lasers. The mode and wavelength can be actively controlled by the off-axis displacements and pump power. The purities of the output HG modes are quantified by intensity distributions and the measured M2 values. The highest order reaches m=15 for stable HGm,0 mode, and wavelength-tunable width is about 10 nm. Moreover, through externally converting the HGm,0 modes, the vortex beams carrying orbital angular momentum (OAM) with a large OAM-tunable range from ±1ℏ to ±15ℏ are produced. This work is effective for largely scaling the spectral and OAM tunable ranges of optical vortex beams.

Compact and lightweight laser absorption spectrometers for accurate trace gas measurements are of great scientific and commercial importance. In these instruments, the multipass cell (MPC) represents a critical element in terms of achievable size and sensitivity. Herein, we introduce a versatile MPC concept which unifies compactness, mechanical rigidity, and optical stability. Relying on fundamental cavity design principles and modern diamond turning techniques, we have developed a segmented circular MPC that allows efficient and interference-free beam folding. A prototype cell is presented featuring up to 10 m optical path length at a total mass of less than 200 g. Incorporated in a highly compact setup without additional beam pre-shaping optics, we demonstrate a normalized noise level of low 10−4 (2σ) at 1 Hz.

Using the Richards-Wolf formulas for an arbitrary circularly polarized optical vortex with an integer topological charge m, we obtain explicit expressions for all components of the electric and magnetic field strength vectors near the focus, as well as expressions for the intensity (energy density) and for the energy flux (components of the Poynting vector) in the focal plane of an aplanatic optical system. For m=2, from the obtained expressions it follows that the energy flux near the optical axis propagates in the reversed direction, rotating along a spiral around the optical axis. On the optical axis itself, the reversed flux is maximal and decays rapidly with the distance from the axis. For m=3, in contrast, the reversed energy flux in the focal plane is minimal (zero) on the optical axis and increases (until the first ring of the light intensity) as a squared distance from the axis.

In this Letter, we report suspended silicon waveguides operating at a wavelength of 7.67 μm with a propagation loss of 3.1±0.3 dB/cm. To our knowledge, this is the first demonstration of low-loss silicon waveguides at such a long wavelength, with loss comparable to other platforms that use more exotic materials. The suspended Si waveguide core is supported by a sub-wavelength grating that provides lateral optical confinement while also allowing access to the buried oxide layer so that it can be wet etched using hydrofluoric acid. We also demonstrate low-loss waveguide bends and s-bends.

Rare-earth-doped fiber lasers are emerging as promising high-power mid-infrared sources for the 2.6-3.0 μm and 3.3-3.8 μm regions based on erbium and holmium ions. The intermediate wavelength range, however, remains vastly underserved, despite prospects for important manufacturing and defense applications. Here, we demonstrate the potential of dysprosium-doped fiber to solve this problem, with a simple in-band pumped grating-stabilized linear cavity generating up to 1.06 W at 3.15 μm. A slope efficiency of 73% with respect to launched power (77% relative to absorbed power) is achieved-the highest value for any mid-infrared fiber laser to date, to the best of our knowledge. Opportunities for further power and efficiency scaling are also discussed.

We reported, to the best of our knowledge, the first experimental evidence of the pulsating soliton with chaotic behavior in an ultrafast fiber laser. By virtue of a dispersive Fourier transformation method, the chaotic behavior of soliton pulsation is visualized by the fact that the mode-locked spectrum collapses abruptly in an unpredictable way during the pulsating process. The obtained results provide the experimental demonstration of the chaotic behavior in the pulsating soliton, which would also give some new insights into the soliton pulsation dynamics in dissipative systems.

NIR-emitting YAl3(BO3)4:Cr3+/Yb3+ (YAB:Cr/Yb) and NaScSi2O6:Cr3+ (BSSO:Cr) phosphors were demonstrated as luminescent converters for broadband NIR phosphor-converted LEDs (pc-LEDs). YAB:Cr/Yb phosphors show emissions in 670–800 nm (Cr3+ emission) and 950–1050 nm (Yb3+ emission) upon excitation at 450 nm. In the BSSO host, Cr3+ ions occupy Sc3+ sites with relatively weak crystal field, and thus a broadband Cr3+ emission at longer wavelengths of 750–950 nm is found for BSSO:Cr phosphors. Moreover, temperature-dependent spectral studies indicate that both YAB:Cr/Yb and BSSO:Cr phosphors exhibit good thermal stability, and more than 80% of the initial emission intensities can be sustained at 150°C. A NIR pc-LED prototype was fabricated by integrating these two phosphors with a blue LED chip (∼450 nm), which generated a broadband emission in the NIR spectral range from 780 to 1050 nm. A NIR light output power of ∼26 mW was achieved at the injection current of 100 mA, with the corresponding energy conversion efficiency of ∼8.6%.