The 50 most-cited articles in Chemistry - A European Journal, 2022

Molecules with restricted rotation around a single bond or atropisomers are found in a wide number of natural products and bioactive molecules as well as in chiral ligands for asymmetric catalysis and smart materials. Although most of these compounds are biaryls and heterobiaryls displaying a C-C stereogenic axis, there is a growing interest in less common and more challenging axially chiral C-N atropisomers. This review offers an overview of the various methodologies available for their asymmetric synthesis. A brief introduction is initially given to contextualize these axially chiral skeletons, including a historical background and examples of natural products containing axially chiral C-N axes. The preparation of different families of C-N based atropisomers is then presented from anilides to chiral five- and six-membered ring heterocycles. Special emphasis has been given to modern catalytic asymmetric strategies over the past decade for the synthesis of these chiral scaffolds. Applications of these methods to the preparation of natural products and biologically active molecules…

Abstract As a sustainable energy technology, electrocatalytic energy conversion and storage has become increasingly prominent. The oxygen reduction reaction (ORR), oxygen evolution reaction (OER), hydrogen evolution reaction (HER), nitrogen reduction reaction (NRR), and carbon dioxide reduction reaction (CO 2 RR) are the key steps in the industrial applications of energy conversion and storage. Compared to the widely used precious metal catalysts, less‐noble transition metal oxides (TMOs) and TMO‐like materials have attracted broad attention as electrocatalysts in the above reactions. In this concept, we summarize the challenges and opportunities of some typical TMOs in electrocatalysis, and modification strategies of TMOs as electrocatalysts are discussed.

Abstract Extension of the medicinal chemistry toolbox is in the vital interest of drug designers. However, the diffusion of an innovation can be a lengthy process. Along these lines, it took almost 70 years before the use of the sulfoximine group reached a critical mass in medicinal chemistry. Even though interest in this versatile functional group has increased exponentially in recent years, there is ample room for further innovative applications. This Review highlights emerging trends and opportunities for drug designers for the utilization of the sulfoximine group in medicinal chemistry, such as in the construction of complex molecules, proteolysis targeting chimeras (PROTACs), antibody‐drug conjugates (ADCs) and novel warheads for covalent inhibition.

Abstract Physico‐chemical properties important to drug discovery (p K a , Log P , and aqueous solubility), as well as metabolic stability, were studied for a series of functionalized gem ‐difluorinated cycloalkanes and compared to those of non‐fluorinated and acyclic counterparts to evaluate the impact of the fluorination. It was found that the influence of the CF 2 moiety on the acidity/basicity of the corresponding carboxylic acids and amines was defined by inductive the effect of the fluorine atoms and was nearly the same for acyclic and cyclic aliphatic compounds. Lipophilicity and aqueous solubility followed more complex trends and were affected by the position of the fluorine atoms, ring size, and even the nature of the functional group present; also, significant differences were found for the acyclic and cyclic series. Also, gem ‐difluorination either did not affect or slightly improved the metabolic stability of the corresponding model derivatives. The presented results can be used as a guide for rational drug design employing fluorine and establish the first chapter in a…

Abstract The preparation of multifunctionalized luminophores with full‐color emission based on an identical core skeleton is a significative but challenging research topic. In this work, eight donor‐donor‐acceptor (D‐D‐A)‐type luminogens based on a central carbazole core bearing a C 6 hydrocarbon chain were designed by using different kinds of donor and acceptor units on the left and right, and synthesized in good yields. These D‐D‐A carbazole derivatives display deep‐blue, sky‐blue, cyan, green, yellow‐green, yellow, orange and red fluorescence in the solid state, achieving full‐color emission covering the whole visible light range under UV light illumination. Notably, the dicyano‐functionalized triphenylamine‐containing carbazole derivative exhibits rare aggregation‐induced near‐infrared emission and red‐to‐near‐infrared mechano‐fluorochromism with high contrast beyond 100 nm. Furthermore, the red‐emissive luminogen can serve as a potential candidate for cell imaging and photodynamic therapy (PDT). This work not only provides reference for the construction of full‐color emissive…

Abstract Polymer alternatives sourced from nature have attracted increasing attention for applications in medicine, cosmetics, agriculture, food, water purification, and more. Among them, chitosan is the most versatile due to its full biodegradability, exceptional biocompatibility, multipurpose bioactivity, and low toxicity. Although remarkable progress has been made in its synthetic modification by using C3/C6 secondary/primary hydroxy (−OH) and the C2 amino (−NH2) active sites, its solubility under physiological conditions remains limited and has hampered larger‐scale adoption. This review summarizes different synthetic methods that increase chitosan‘s hydrophilicity and water solubility by using covalent modifications, namely amino acid addition, quaternary ammonium formation, phosphorylation, and carboxymethylation. We also review several applications for each type of substitution in fields such as cosmetics, medicine, agriculture, and water purification, and provide an outlook and perspective for future modifications and implementations.

Biocatalysis integrate microbiologists, enzymologists, and organic chemists to access the repertoire of pharmaceutical and agrochemicals with high chemoselectivity, regioselectivity, and enantioselectivity. The saturation of carbon-carbon double bonds by biocatalysts challenges the conventional chemical methodology as it bypasses the use of precious metals (in combination with chiral ligands and molecular hydrogen) or organocatalysts. In this line, Ene-reductases (ERs) from the Old Yellow Enzymes (OYEs) family are found to be a prominent asymmetric biocatalyst that is increasingly used in academia and industries towards unparalleled stereoselective trans-hydrogenations of activated C=C bonds. ERs gained prominence as they were used as individual catalysts, multi-enzyme cascades, and in conjugation with chemical reagents (chemoenzymatic approach). Besides, ERs' participation in the photoelectrochemical and radical-mediated process helps to unlock many scopes outside traditional biocatalysis. These up-and-coming methodologies entice the enzymologists and chemists to explore, expand…

Abstract Exerting morphological control over metal‐organic frameworks (MOFs) is critical for determining their catalytic performance and to optimize their packing behavior in areas from separations to fuel gas storage. A mechanism‐based approach to tailor the morphology of MOFs is introduced and experimentally demonstrated for five cubic Zn 4 O‐based MOFs. This methodology provides three key features: 1) computational screening for selection of appropriate additives to change crystal morphology based on knowledge of the crystal structure alone; 2) use of additive to metal cluster geometric relationships to achieve morphologies expressing desired crystallographic facets; 3) potential for suppression of interpenetration for certain phases.

Helicenes and helicene-like molecules, usually containing multiple ortho-fused aromatic rings, possess unique helical chirality. These compounds have found a wide range of important applications in many research fields, such as asymmetric catalysis, molecular recognition, sensors and responsive switches, circularly polarized luminescence materials and others. However, the catalytic enantioselective synthesis of helicenes was largely underexplored, when compared with the enantioselective synthesis of molecules bearing other stereogenic elements (e.g. central chirality and axial chirality). Since the pioneer work of asymmetric synthesis of helicenes via enantioselective [2+2+2] cycloaddition of triynes by Stará and Starý, last two decades have witnessed the tremendous development in the catalytic enantioselective synthesis of helicenes. In this review, we comprehensively summarized the advances in this field, which include methods enabled by both transition metal catalysis and organocatalysis, and provide our perspective on its future development.

Abstract Pentafluorosulfanyl (SF5)‐containing compounds and corresponding analogs are a highly valuable class of fluorine‐containing building blocks owing to their unique properties. The reason for that is the set of peculiar and tremendously beneficial characteristics they can impart on molecules once introduced onto them. Despite this, their application in distinct scientific fields remains modest, given the extremely harsh reaction conditions needed to access such compounds. The recent synthetic approaches via S−F, and C−SF5 bond formation as well as the use of SF5‐containing building blocks embody a “stairway‐to‐heaven” loophole in the synthesis of otherwise‐inaccessible chemical scaffolds only a few years ago. Herein, we report and evaluate the properties of the SF5 group and analogs, by summarizing synthetic methodologies available to access them as well as following applications in material science and medicinal chemistry since 2015.

Luminescent organic-inorganic metal halides (OIMHs) are well known as a new materials family in recent years. Novel materials and applications of luminescent OIMHs have been explored by changing either the organic component or the metal halide species. Thereinto, the stimuli-responsive (SR) phenomena in OIMHs have drawn much attention recently, for not only their attractive application potential but also the helpfulness in understanding the stability of OIMHs to the external environment. Herein, the luminescent OIMHs that are sensitive to external stimuli including contact, pressure, mechanical grinding, light, heat, and gas molecules, are reviewed, with an emphasis on analyses of the structural change during the SR process. The applications of SR luminescent OIMHs in widespread fields, including gas sensing, information encryption, and rewritable luminescent paper are summarized. Finally, the challenges that deserve to be further explored in this research field are discussed, which provides certain guidance for the future study of SR luminescent OIMHs.

Cysteine bioconjugation serves as a powerful tool in biological research and has been widely used for chemical modification of proteins, constructing antibody-drug conjugates, and enabling cell imaging studies. Cysteine conjugation reactions with fast kinetics and exquisite selectivity have been under heavy pursuit as they would allow clean protein modification with just stoichiometric amounts of reagents, which minimizes side reactions, simplifies purification and broadens functional group tolerance. In this concept, we summarize the recent advances in fast cysteine bioconjugation, and discuss the mechanism and chemical principles that underlie the high efficiencies of the newly developed cysteine reactive reagents.

As a new class of porous crystalline materials, hydrogen-bonded organic frameworks (HOFs) assembled from building blocks by hydrogen bonds have gained increasing attention. HOFs benefit from advantages including mild synthesis, easy purification, and good recyclability. However, some HOFs transform into unstable frameworks after desolvation, which hinders their further applications. Nowadays, the main challenges of developing HOFs lie in stability improvement, porosity establishment, and functionalization. Recently, more and more stable and permanently porous HOFs have been reported. Of all these design strategies, stronger charge-assisted hydrogen bonds and coordination bonds have been proven to be effective for developing stable, porous, and functional solids called hybrid HOFs, including ionic and metallized HOFs. This Review discusses the rational design synthesis principles of hybrid HOFs and their cutting-edge applications in selective inclusion, proton conduction, gas separation, catalysis and so forth.

Single-atom catalysts (SACs) have emerged as a new frontier in areas such as electrocatalysis, photocatalysis, and enzymatic catalysis. Aided by recent advances in the synthetic methodologies of nanomaterials, atomic characterization technologies, and theoretical calculation modeling, various SACs have been prepared for a variety of catalytic reactions. To meet the requirements of SACs with distinctive performance and appreciable selectivity, much research has been carried out to adjust the coordination configuration and electronic properties of SACs. This concept summarizes the latest advances in the experimental and computational efforts aimed at tuning the axial coordination of SACs. Series of atoms, functional groups or even macrocycles are oriented into the atomic metal center, and how this affects the electrocatalytic performance is also reviewed. Finally, this concept presents perspectives for the further precise design, preparation and in-situ detection of axially coordinated SACs.

Abstract Two‐photon polymerization (2PP) represents a powerful technique for the fabrication of precise three‐dimensional structures on a micro‐ and nanometer scale for various applications. While many review articles are focusing on the used polymeric materials and their application in 2PP, in this review the class of two‐photon photo initiators (2PI) used for radical polymerization is discussed in detail. Because the demand for highly efficient 2PI has increased in the last decades, different approaches in designing new efficient 2PIs occurred. This review summarizes the 2PIs known in literature and discusses their absorption behavior under one‐ and two‐photon absorption (2PA) conditions, their two‐photon cross sections (σ TPA ) as well as their efficiency under 2PP conditions. Here, the photo initiators are grouped depending on their chromophore system (D‐π‐A‐π‐D, D‐π‐D, etc.). Their polymerization efficiencies are evaluated by fabrication windows (FW) depending on different laser intensities and writing speeds.

Enantioselective, intermolecular alkene arylamination was achieved through gold redox catalysis. Screening of ligands revealed chiral P,N ligands as the optimal choice, giving alkene aminoarylation with good yields (up to 80 %) and excellent stereoselectivity (up to 99 : 1 er). As the first example of enantioselective gold redox catalysis, this work confirmed the feasibility of applying a chiral ligand at the gold(I) stage, with the stereodetermining step (SDS) at the gold(III) intermediate, thus opening up a new way to conduct gold redox catalysis with stereochemistry control.

Abstract Combining the self‐sacrifice of a highly crystalline substance to design a multistep chain reaction towards ultrathin active‐layer construction for high‐performance water splitting with atmospheric‐temperature conditions and an environmentally benign aqueous environment is extremely intriguing and full of challenges. Here, taking cobalt carbonate hydroxides (CCHs) as the initial crystalline material, we choose the Lewis acid metal salt of Fe(NO3)3 to induce an aqueous‐phase chain reaction generating free CO32− ions with subsequent instant FeCO3 hydrolysis. The resultant ultrathin (∼5 nm) amorphous Fe‐based hydroxide layer on CCH results in considerable activity in catalyzing the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), yielding 10/50 mA ⋅ cm−2 at overpotentials of 230/266.5 mV for OER and 72.5/197.5 mV for HER. The catalysts can operate constantly in 1.0 M KOH over 48 and 45 h for the OER and HER, respectively. For bifunctional catalysis for alkaline electrolyzer assembly, a cell voltage as low as 1.53 V was necessary to yield 10 mA cm−2 (1.7 V…

In this study we propose to coin the term Wolfium bond (WfB) to refer to a net attractive force (noncovalent interaction) between any element of group 6 and electron donor atoms (neutral molecules or anions) and to differentiate it from a coordination bond (metal-ligand interaction). We provide evidence of the existence of this interaction by inspecting the X-ray crystal structure of proteins containing Molybdopterin and Tungstopterin cofactors from the Protein Data Bank (PDB). The plausible biological role of the interaction as well as its physical nature (antibonding Wf-Ligand orbital involved) are also analyzed by means of ab initio calculations (RI-MP2/def2-TZVP level of theory), Atoms in Molecules (AIM), Natural Bond Orbital (NBO) and Noncovalent Interactions plot (NCIplot) analyses.

Recently, chalcogen bonding has been investigated in more detail in organocatalysis and the scope of activated functionalities continues to increase. Herein, the activation of imines in a Povarov [4+2] cycloaddition reaction with bidentate cationic chalcogen bond donors is presented. Tellurium-based Lewis acids show superior properties compared to selenium-based catalysts and inactive sulfur-based analogues. The catalytic activity of the chalcogen bonding donors increases with weaker binding anions. Triflate, however, is not suitable due to its participation in the catalytic pathway. A solvent screening revealed a more efficient activation in less polar solvents and a pronounced effect of solvent (and catalyst) on endo : exo diastereomeric ratio. Finally, new chiral chalcogen bonding catalysts were applied but provided only racemic mixtures of the product.

Total synthesis is considered by many as the finest combination of art and science. During the last decades, several concepts were proposed for achieving the perfect vision of total synthesis, such as atom economy, step economy, or redox economy. In this context, C-H functionalization represents the most powerful platform that has emerged in the last years, empowering rapid synthesis of complex natural products and enabling diversification of bioactive scaffolds based on natural product architectures. In this review, we present an overview of the recent strategies towards the total synthesis of heterocyclic natural products enabled by C-H functionalization. Heterocycles represent the most common motifs in drug discovery and marketed drugs. The implementation of C-H functionalization of heterocycles enables novel tactics in the construction of core architectures, but also changes the logic design of retrosynthetic strategies and permits access to natural product scaffolds with novel and enhanced biological activities.

Abstract N‐Heterocyclic carbene (NHC) catalysis is a by now consolidated organocatalytic platform for a number of synthetic (asymmetric) transformations via diverse reaction modes/intermediates. In addition to the typical umpolung processes involving acyl anion/homoenolate equivalent species, implementation of protocols under oxidative conditions greatly expands the possibilities of this methodology. Oxidative NHC‐catalysis allows for oxidative and oxygenative transformations through specific manipulations of Breslow‐type species depending upon the oxidant used (external oxidant or O 2 /air), the derived NHC‐bound intermediates paving the way to non‐ umpolung processes through activation of carbon atoms and heteroatoms. This review is intended to update the state of the art in oxidative NHC‐catalyzed reactions that appeared in the literature from 2014 to present, with a strong focus to crucial intermediates and their mechanistic implications.

Molecular ferroelastics have received particular attention for potential applications in mechanical switches, shape memory, energy conversion, information processing, and solar cells, by taking advantages of their low-cost, light-weight, easy preparation, and mechanical flexibility. The unique structures of organic-inorganic hybrid perovskites have been considered to be a design platform for symmetry-breaking-associated order-disorder in lattice, thereby possessing great potential for ferroelastic phase transition. Herein, we review the research progress of organic-inorganic hybrid perovskite ferroelastics in recent years, focusing on the crystal structures, dimensions, phase transitions and ferroelastic properties. In view of the few reports on molecular-based hybrid ferroelastics, we look forward to the structural design strategies of molecular ferroelastic materials, as well as the opportunities and challenges faced by molecular-based hybrid ferroelastic materials in the future. This review will have positive guiding significance for the synthesis and future exploration of…

Covalent Triazine Frameworks (CTFs) have received great attention from academia owing to their unique structure characteristics such as nitrogen-rich structure, chemical stability, fully conjugated skeleton and high surface area; all these unique properties make CTFs attractive for widespread applications, especially for photocatalytic applications. In this review, we aim to provide recent advances in the CTFs preparation, and mainly focus on their photocatalytic applications. This review provides a comprehensive and systematic overview of the CTFs' synthetic methods, crystallinity lifting strategies, and their applications for photocatalytic water splitting. Firstly, a brief background including the photocatalytic water splitting and crystallinity are provided. Then, synthetic methods related to CTFs and the strategies for enhancing the crystallinity are summarized and compared. After that, the general photocatalytic mechanism and the strategies to improve the photocatalytic performance of CTFs are discussed. Finally, the perspectives and challenges of fabricating high crystalline…

The p-Cymene ruthenium(II) complex is one of the most widely used catalysts in C-H activation. However, enantioselective C-H activation promoted by arene ruthenium(II) complexes has not been realized until recently. The revealed strategies include intramolecular nitrene C-H insertion, the use of chiral transient directing groups, chiral carboxylic acid, relay catalysis, and chiral arene ligands. In this minireview, these advances are summarized and discussed in the hope of spurring further developments.

For a long time, luminescence phenomena were strictly distinguished between the emission of isolated molecules in dilute solutions or close-packed structures such as in powders or aggregates. This changed with the breakthrough observation of dual-state efficient materials, which led to a rapid boost of publications examining the influence of structural features to achieve balanced emission with disregarded molecular surroundings. Some first general structural design concepts have already been proposed based on reoccurring patterns and pivotal motifs. However, we have found another way to classify these solution and solid-state emitters (SSSEs). Hence, this minireview aims to present an overview of published structural features of SSSEs while shining light on design concepts from a more generalized perspective. Since SSSEs are believed to bridge the gap of hitherto known aggregation-sensitive compound classes, we hope to give future scientists a versatile tool in hand to efficiently design novel luminescent materials.

Abstract We report on a unique DNA aptamer, denoted MSA52, that displays universally high affinity for the spike proteins of wildtype SARS‐CoV‐2 as well as the Alpha, Beta, Gamma, Epsilon, Kappa, Delta and Omicron variants. Using an aptamer pool produced from round 13 of selection against the S1 domain of the wildtype spike protein, we carried out one‐round SELEX experiments using five different trimeric spike proteins from variants, followed by high‐throughput sequencing and sequence alignment analysis of aptamers that formed complexes with all proteins. A previously unidentified aptamer, MSA52, showed Kd values ranging from 2 to 10 nM for all variant spike proteins, and also bound similarly to variants not present in the reselection experiments. This aptamer also recognized pseudotyped lentiviruses (PL) expressing eight different spike proteins of SARS‐CoV‐2 with Kd values between 20 and 50 pM, and was integrated into a simple colorimetric assay for detection of multiple PL variants. This discovery provides evidence that aptamers can be generated with high affinity to multiple…

Abstract A series of Zr‐based UiO‐n MOF materials (n=66, 67, 68) have been studied for iodine capture. Gaseous iodine adsorption was collected kinetically from a home‐made set‐up allowing the continuous measurement of iodine content trapped within UiO‐n compounds, with organic functionalities (−H, −CH3, −Cl, −Br, −(OH)2, −NO2, −NH2, (−NH2)2, −CH2 NH2) by in‐situ UV‐Vis spectroscopy. This study emphasizes the role of the amino groups attached to the aromatic rings of the ligands connecting the {Zr6O4(OH)4} brick. In particular, the preferential interaction of iodine with lone‐pair groups, such as amino functions, has been experimentally observed and is also based on DFT calculations. Indeed, higher iodine contents were systematically measured for amino‐functionalized UiO‐66 or UiO‐67, compared to the pristine material (up to 1211 mg/g for UiO‐67‐(NH2)2). However, DFT calculations revealed the highest computed interaction energies for alkylamine groups (−CH2NH2) in UiO‐67 (−128.5 kJ/mol for the octahedral cavity), and pointed out the influence of this specific functionality compared…

Carbon Dots (CDs) are carbon nanoparticles which were discovered in 2004. Despite two decades of intensive work from the scientific community and a colossal amount of gathered experimental data, no definitive consensus exists to date on several key aspects such as the actual definition of CDs and the origin of their emissive properties. This review proposes a critical evaluation of these fundamental questions. Lay persons will also find here an alternative introduction to the CDs domain, including synthetic strategies, photophysical properties, as well as challenges and outlook of this exciting new area.

Abstract An electrophotochemical dual metal‐catalyzed protocol for decarboxylative arylation of simple aliphatic carboxylic acids with aryl halides is reported. The relative stabilities of catalytically active metal complexes simultaneously generated at anode and cathode are the key design elements for the success of this convergent paired electrolysis. This new electrophotocatalytic method is mild, robust, and most importantly, capable of accommodating simple primary aliphatic acids including acetic acid – ubiquitous and variegated structural motifs yet remain oddly challenging substrates – directly as native functional groups for decarboxylative C(sp2)−C(sp3) bond formation.

The past several years have witnessed the tremendous development of novel chemical structures, new design strategies and intriguing applications in the field of room-temperature phosphorescence (RTP) and organic afterglow materials. This Review article focuses on recent advancements of high-performance organic afterglow materials obtained by two-component design strategies such as a dopant-matrix, donor-acceptor, sensitization, and energy-transfer strategies. Based on some cutting-edge studies, organic afterglow efficiency has been largely improved, exceeding 90 % in several cases. Organic afterglow durations reach tens of seconds in phosphorescence systems and hours in donor-acceptor systems. Organic afterglow brightness outcompetes some inorganic afterglow materials in the first several seconds after ceasing excitation source. Organic afterglow colors cover the whole visible regions and extend to near-infrared regions with respectful afterglow efficiency. On the basis of these achievements, researchers demonstrate promising applications of organic afterglow materials in diverse…

Abstract The catalysed ring opening copolymerizations (ROCOP) of carbon dioxide/epoxide or anhydride/epoxide are controlled polymerizations that access useful polycarbonates and polyesters. Here, a systematic investigation of a series of heterodinuclear Mg(II)M(II) complexes reveals which metal combinations are most effective. The complexes combine different first row transition metals (M(II)) from Cr(II) to Zn(II), with Mg(II); all complexes are coordinated by the same macrocyclic ancillary ligand and by two acetate co‐ligands. The complex syntheses and characterization data, as well as the polymerization data, for both carbon dioxide/cyclohexene oxide (CHO) and endo‐norbornene anhydride (NA)/cyclohexene oxide, are reported. The fastest catalyst for both polymerizations is Mg(II)Co(II) which shows propagation rate constants (kp) of 34.7 mM−1 s−1 (CO2) and 75.3 mM−1 s−1 (NA) (100 °C). The Mg(II)Fe(II) catalyst also shows excellent performances with equivalent rates for CO2/CHO ROCOP (kp=34.7 mM−1 s−1) and may be preferable in terms of metallic abundance, low cost and low toxicity.…

Surface organic ligands are critical in dictating the structures and properties of atomically precise metal nanoclusters. In contrast to the conventionally used thiolate, phosphine and alkynyl ligands, nitrogen donor ligands have not been used in the protection for well-defined metal nanoclusters until recently. This review focuses on recent developments in atomically precise metal nanoclusters stabilized by different types of nitrogen donor ligands, in which the synthesis, total structure determination and various properties are covered. We hope that this review will provide insights into the rational design of N donor-protected metal nanoclusters in terms of structural and functional modulation.

Carbonyl-containing derivatives show enduring vitality in the field of thermally activated delayed fluorescence (TADF) materials; they can realize high device efficiency by using both singlet and triplet excitons for electroluminescence. Recently, a system based on fused ketone/amine exhibited huge potential for constructing multi-resonance TADF (MR-TADF) emitters, which exhibit higher narrow-band emission than conventional TADF emitters with twisted donor-acceptor (D-A) structure. Herein, we summarize current research progress in both traditional and MR-type ketone derivatives with TADF characteristics for introducing the molecular design strategy of maintaining high device efficiency while keeping narrow-band emission profile. We hope this review can inspire the emergence of more high-performance narrow-band materials.

Recent years have witnessed a boom of machine learning (ML) applications in chemistry, which reveals the potential of data-driven prediction of synthesis performance. Digitalization and ML modelling are the key strategies to fully exploit the unique potential within the synergistic interplay between experimental data and the robust prediction of performance and selectivity. A series of exciting studies have demonstrated the importance of chemical knowledge implementation in ML, which improves the model's capability for making predictions that are challenging and often go beyond the abilities of human beings. This Minireview summarizes the cutting-edge embedding techniques and model designs in synthetic performance prediction, elaborating how chemical knowledge can be incorporated into machine learning until June 2022. By merging organic synthesis tactics and chemical informatics, we hope this Review can provide a guide map and intrigue chemists to revisit the digitalization and computerization of organic chemistry principles.

Abstract Solid‐state NMR (ssNMR) spectroscopy facilitates the non‐destructive characterization of structurally heterogeneous biomolecules in their native setting, for example, comprising proteins, lipids and polysaccharides. Here we demonstrate the utility of high and ultra‐high field 1H‐detected fast MAS ssNMR spectroscopy, which exhibits increased sensitivity and spectral resolution, to further elucidate the atomic‐level composition and structural arrangement of the cell wall of Schizophyllum commune, a mushroom‐forming fungus from the Basidiomycota phylum. These advancements allowed us to reveal that Cu(II) ions and the antifungal peptide Cathelicidin‐2 mainly bind to cell wall proteins at low concentrations while glucans are targeted at high metal ion concentrations. In addition, our data suggest the presence of polysaccharides containing N‐acetyl galactosamine (GalNAc) and proteins, including the hydrophobin proteins SC3, shedding more light on the molecular make‐up of cells wall as well as the positioning of the polypeptide layer. Obtaining such information may be of critical…

A photoswitchable ligand and palladium(II) ions form a dynamic mixture of self-assembled metallosupramolecular structures. The photoswitching ligand is an ortho-fluoroazobenzene with appended pyridyl groups. The E-isomer is combined with palladium(II) salts affords a double-walled triangle with composition [Pd3L6]6+ and a distorted tetrahedron [Pd4L8]8+(1:2 ratio at 298 K). Irradiation with 410 nm light generates a photostationary state with ~80% of the E-isomer of the ligand which results in the selective disassembly of the tetrahedron, the more thermodynamically stable structure, and the formation of the triangle, the kinetic product. The triangle is then slowly transformed back into the tetrahedron over 2 days at 333 K. The Z-isomer of the ligand does not form any well-defined structures and has a thermal half-life of 25 days at 298K. This approach shows how a thermodynamically preferred self-assembled structure can be reversibly pumped to a kinetic trap by small perturbations of the isomer distribution using non-destructive visible light.

Abstract The synthesis and characterization of laterally extended azabora[5]‐, ‐[6]‐ and ‐[7]helicenes, assembled from N‐heteroaromatic and dibenzo[g,p]chrysene building blocks is described. Formally, the π‐conjugated systems of the pristine azaborole helicenes were enlarged with a phenanthrene unit leading to compounds with large Stokes shifts, significantly enhanced luminescence quantum yields (Φ) and dissymmetry factors (glum). The beneficial effect on optical properties was also observed for helical elongation. The combined contributions of lateral and helical extensions resulted in a compound showing green emission with Φ of 0.31 and |glum| of 2.2×10−3, highest within the series of π‐extended azaborahelicenes and superior to emission intensity and chiroptical response of its non‐extended congener. This study shows that helical and lateral extensions of π‐conjugated systems are viable strategies to improve features of azaborole helicenes. In addition, single crystal X‐ray analysis of configurationally stable [6]‐ and ‐[7]helicenes was used to provide insight into their packing…

Abstract The pollution of groundwater with nitrate is a serious issue because nitrate can cause several diseases such as methemoglobinemia or cancer. Therefore, selective removal of nitrate by efficient binding to supramolecular hosts is highly desired. Here we describe how to make [2+3] amide cages in very high to quantitative yields by applying an optimized Pinnick oxidation protocol for the conversion of corresponding imine cages. By NMR titration experiments of the eight different [2+3] amide cages with nitrate, chloride and hydrogen sulfate we identified one cage with an unprecedented high selectivity towards nitrate binding vs. chloride ( S =705) or hydrogensulfate ( S >13500) in CD 2 Cl 2 /CD 3 CN (1 : 3). NMR experiments as well as single‐crystal structure comparison of host‐guest complexes give insight into structure‐property‐relationships.

The onset of COVID-19, coupled with the finer lens placed on systemic racial disparities within our society, has resulted in increased discussions around mental health. Despite this, mental health struggles in research are still often viewed as individual weaknesses and not the result of a larger dysfunctional research culture. Mental health interventions in the science, technology, engineering, and mathematics (STEM) academic community often focus on what individuals can do to improve their mental health instead of focusing on improving the research environment. In this paper, we present four aspects of research that may heavily impact mental health based on our experiences as research scientists: bullying and harassment; precarity of contracts; diversity, inclusion, and accessibility; and the competitive research landscape. Based on these aspects, we propose systemic changes that institutions must adopt to ensure their research culture is supportive and allows everyone to thrive.

Transition metal-catalyzed enantioselective functionalization of ubiquitous C-H bonds has proven to be promising field as it offers the construction of chiral molecular complexity in a step- and atom-economical manner. In recent years, gold has emerged as an attractive contender for catalyzing such reactions. The unique reactivities and selectivities offered by gold catalysts have been exploited to access numerous asymmetric transformations based on gold-catalyzed C-H functionalization processes. Herein, this review critically highlights the major advances and discoveries made in the enantioselective C-H functionalization under gold catalysis which is accompanied by mechanistic insights at appropriate places.

Convergent paired electrolysis combines both anodic and cathodic reactions simultaneously in an electrochemical transformation. It provides a highly energy-efficient and divergent approach to conventionally challenging and useful structures. However, the physical separation of the two half-electrode reactions makes it extremely difficult to couple the intermediates arising from the two electrodes. In this concept article, four strategies used in convergent paired electrolysis will be discussed from the perspective of the reaction mechanism: a) metal-catalyzed convergent paired electrolysis, b) convergent paired electrolysis enabled by persistent radical effects, c) microfluidic chemistry applied to convergent paired electrolysis, and d) alternating current electrolysis.

The aza-ortho-quinone methide (aza-o-QM) chemistry has overwhelmingly progressed in the past few decades. This review aims to integrate various transition metal-catalyzed and organocatalytic strategies in taming aza-o-QM intermediates, including the aza-ortho-vinylidene quinone methide (aza-o-VQM), aza-ortho-alkynyl quinone methide (aza-o-AQM), aza-para-quinone methide (aza-p-QM), and indole-based aza-o-QM analog. These transient species are often utilized for the direct and enantioselective synthesis of complex (hetero)polycyclic or fused-ring molecular scaffolds such as tetrahydroquinoline and indoline, among others, which are abundant in many natural products, bioactive compounds, and pharmaceuticals.

Abstract The development of cost‐effective sorbents for direct capture of trace CO2 (<1 %) from the atmosphere is an important and challenging task. Natural or commercial zeolites are promising sorbents, but their performance in adsorption of trace CO2 has been poorly explored to date. A systematic study on capture of trace CO2 by commercial faujasite zeolites reveals that the extra‐framework cations play a key role on their performance. Under dry conditions, Ba−X displays high dynamic uptake of 1.79 and 0.69 mmol g−1 at CO2 concentrations of 10000 and 1000 ppm, respectively, and shows excellent recyclability in the temperature‐swing adsorption processes. K−X exhibits perfect moisture resistance, and >95 % dry CO2 uptake can be preserved under relative humidity of 74 %. In situ solid‐state NMR spectroscopy, synchrotron X‐ray diffraction and neutron diffraction reveal two binding sites for CO2 in these zeolites, namely the basic framework oxygen atoms and the divalent alkaline earth metal ions. This study unlocks the potential of low‐cost natural zeolites for applications in direct…

Organosilanes play essential roles in many important research areas. The use of readily available chlorosilanes to catalytically access these compounds is synthetically appealing but remains a long-standing challenge. Nickel-catalyzed reductive cross-coupling reaction has recently emerged as a promising protocol to arrive at this goal. This strategy allows the chlorosilanes to be coupled with various carbon electrophiles under mild conditions. These reactions afford organosilanes with improved molecular diversity, structural complexity, and functional group compatibility. This Concept article summarizes the recent advance on nickel-catalyzed reductive C-Si couplings of chlorosilanes.

All-polymer solar cells (all-PSCs) have attracted considerable attention owing to their pronounced advantages of excellent mechanical flexibility/stretchability and greatly enhanced device stability as compared to other types of organic solar cells (OSCs). Thanks to the extensive research efforts dedicated to the development of polymer acceptors, all-PSCs have achieved remarkable improvement of photovoltaic performance, recently. This review summarizes the recent progress of polymer acceptors based on the key electron-deficient building blocks, which include bithiophene imide (BTI) derivatives, boron-nitrogen coordination bond (B←N)-incorporated (hetero)arenes, cyano-functionalized (hetero)arenes, and fused-ring electron acceptors (FREAs). In addition, single-component-based all-PSCs are also briefly discussed. The structure-property correlations of polymer acceptors are elaborated in detail. Finally, we offer our insights into the development of new electron-deficient building blocks with further optimized properties and the polymers built from them for efficient all-PSCs.

Abstract Circular polarized luminescence (CPL)‐active materials attract great attentions owing to their widely applications in 3D optical displays and encrypted transmission. Inspired by the strategies adopted in perovskite based CPL materials, herein, CPL‐active hybrids (D)‐ and (L)‐(tert‐butyl prolinate)MnCl3 were successfully prepared by assembling chiral D/L tert‐butyl prolinate with manganese (II) chloride. Single crystal structures show the as‐formed hybrids possess one‐dimensional (1D) structure containing linear chains of face‐sharing MnCl6 octahedral surrounded by prolinate cations. The 1D Mn(II) hybrids display strong red emission peaked at 646 nm with PLQY of 67.1 % and 57.2 % for d‐type and l‐type, respectively, representing the highest PLQY for 1D MnII hybrids. Interestingly, the 1D Mn(II) hybrids exhibit prominent circular dichroism (CD) signals and remarkable CPL activity with the dissymmetry factor g of 6.1*10−3 and −6.3*10−3 from 550 to 800 nm for (D)‐ and (L)‐(tert‐butyl prolinate)MnCl3, respectively, owing to the existence of chiral cations. It is worthy noted the…

Abstract Two boron‐, sulfur‐ and nitrogen‐doped polycyclic aromatic hydrocarbon multiple resonance thermally activated delayed fluorescence emitters with high photoluminescent quantum efficiency (88 %) and rapid reverse intersystem crossing (kRISC= 1.0×105 s−1) are designed and synthesized, enabling efficient narrow‐band blue electroluminescence at 473 nm with full width at half maximum of 29 nm and maximum external quantum efficiency of 22.0 %, which provides an avenue to expand the structure library for multiple resonance emitters and an approach to regulate their emission properties.

Abstract Multiple heterohelicenes are a unique class of helical nonplanar scaffolds that have attracted great attention due to their appealing shapes, optical and electronic properties, and potential applications in chiral materials. This review describes the recent advances and challenges in the design and synthesis of representative multiple heterohelicenes with intriguing chiral properties. And the corresponding applications are also covered.

The construction of hydrogen-bonded organic framework materials by intermolecular hydrogen bonding forces has been rapidly developed in the last decade, among which, the strong intermolecular hydrogen bonding and functional binding sites exhibited by nitrogen-containing functional groups have made them favorites for designing organic components to customize functionalized porous materials. This review systematically introduces the types of nitrogen-containing monomers used to prepare porous hydrogen-bonded organic backbones and the principles of their construction, summarizes the design advantages of crystalline materials from an elemental perspective, and presents the applications of such HOFs in the fields of gas adsorption/separation, molecular recognition, plasmonic conductivity, biomedical, and luminescent materials, etc. Finally, the prospects for the development of such materials are discussed and potential directions for future work are analyzed.

Abstract Distorting linear polyaromatic hydrocarbons (PAHs) out of planarity affects their physical properties and breaks their symmetry to induce inherent chirality. However, the chirality cannot be achieved in large distorted PAHs‐based macrocycles due to a low racemization barrier for isomerization. Herein, we report the precise synthesis and tuning size‐dependent (chir)optical properties of a new class of chiral PAHs‐containing conjugated macrocycles (cyclo[n]paraphenylene‐2,6‐anthrylene, [n]CPPAn 2,6 ; n=6–8). Their inherent chiralities were squeezed out in small anthrylene‐based macrocycles. Efficient resolutions for chiral enantiomers with (P)/(M)‐helicity of small [6‐7]CPPAn s were achieved by HPLC. Interestingly, these macrocycles showed enriched size‐dependent physical, chiral, and (chir)optical properties. Theoretical calculations indicate that these macrocycles have high strain energy (E strain =60.8 to 73.4 kcal/mol) and very small E gap (∼3.0 eV). Notably, these enantiomers showed strong chiroptical properties and dissymmetry factors (|g abs | and |g lum |∼0.01 for an…