The 100 most-cited articles in Chemistry - A European Journal, 2020

Abstract An increasing number of circularly polarized luminescence (CPL) molecular emitters has been developed in recent years and many of them are intended for applications in which high overall CPL efficiencies are required. In order to have a complete picture of the efficiency of a CPL emitter, dissymmetry factor (glum) is not enough. In the following we propose a new quantity, named CPL brightness (BCPL), which takes into account absorption extinction coefficient and quantum yield along with the glum factor. We calculated BCPL value for more than 180 compounds reported in the literature and we analyse data distribution for the main classes of CPL molecular emitters. This tool can be employed to put into context new CPL active compounds and to direct the choice of molecular systems for specific CPL applications.

This review article focuses on the principles and applications of miniaturized near-infrared (NIR) spectrometers. This technology and its applicability has advanced considerably over the last few years and revolutionized several fields of application. What is particularly remarkable is that the applications have a distinctly diverse nature, ranging from agriculture and the food sector, through to materials science, industry and environmental studies. Unlike a rather uniform design of a mature benchtop FTNIR spectrometer, miniaturized instruments employ diverse technological solutions, which have an impact on their operational characteristics. Continuous progress leads to new instruments appearing on the market. The current focus in analytical NIR spectroscopy is on the evaluation of the devices and associated methods, and to systematic characterization of their performance profiles.

Although oxide nanoparticles are ubiquitous in science and technology, a multitude of compositions, phases, structures, and doping levels exist, each one requiring a variety of conditions for their synthesis and modification. Besides, experimental procedures are frequently dominated by high temperatures or pressures and by chemical contaminants or waste. In recent years, laser synthesis of colloids emerged as a versatile approach to access a library of clean oxide nanoparticles relying on only four main strategies running at room temperature and ambient pressure: laser ablation in liquid, laser fragmentation in liquid, laser melting in liquid and laser defect-engineering in liquid. Here, established laser-based methodologies are reviewed through the presentation of a panorama of oxide nanoparticles which include pure oxidic phases, as well as unconventional structures like defective or doped oxides, non-equilibrium compounds, metal-oxide core-shells and other anisotropic morphologies. So far, these materials showed several useful properties that are discussed with special emphasis…

Axially chiral indole-based frameworks have been recognized as a class of important five-membered heterobiaryls and developing catalytic asymmetric approaches for constructing these frameworks in an enantioselective manner is highly desirable. In recent years, synthetic chemists have paid much attention to this research field, and rapid developments have occurred. At this point, a range of axially chiral indole-based scaffolds have been constructed via various catalytic asymmetric reactions based on different strategies. Thus, the catalytic asymmetric construction of axially chiral indole-based frameworks has become an emerging area. This minireview summarizes the rapid advances in this field and gives some insights into future developments, which will help this research field to thrive.

Metal-organic framework (MOF) and covalent organic framework (COF) nanosheets are a new type of two-dimensional (2D) materials with unique design principles and various synthesis methods. They are considered ideal electrochemical devices due to the ultrathin thickness, easily tunable molecular structure, large porosity and other unique properties. There are two common methods to synthesize 2D MOF/COF nanosheets: bottom-up and top-down. The top-down strategy mainly includes ultrasonic assisted exfoliation, electrochemical exfoliation and mechanical exfoliation. Another strategy mainly includes interface synthesis, modulation synthesis, surfactant-assisted synthesis. In this Review, the development of ultrathin 2D nanosheets in the field of electrochemistry (supercapacitors, batteries, oxygen reduction, and hydrogen evolution) is introduced, and their unique dimensional advantages are highlighted.

Abstract Transition‐metal‐catalyzed C−H functionalization reactions with Cp*M III catalysts (M=Co, Rh, Ir) have found a wide variety of applications in organic synthesis. Albeit the intrinsic difficulties in achieving catalytic stereocontrol using these catalysts due to their lack of additional coordination sites for external chiral ligands and the conformational flexibility of the Cp ligand, catalytic enantioselective C−H functionalization reactions using the Group 9 metal triad with Cp‐type ligands have been intensively studied since 2012. In this minireview, the progress in these reactions according to the type of the chiral catalyst used are summarized and discussed. The development of chiral Cp x ligands the metal complexes thereof, artificial metalloenzymes, chiral carboxylate‐assisted enantioselective C−H activations, enantioselective alkylations assisted by chiral carboxylic acids or chiral sulfonates, and chiral transient directing groups are discussed.

Solution combustion synthesis (SCS) has been widely used to produce simple and complex oxides with a desired morphology (size and shape). SCS is valuable due to low cost, simplicity and energy efficient synthesis. To guarantee the best molecular-level mixing of reactants in an aqueous or solvent-based solution some parameters need to be controlled, such as fuel type, metal cations precursors, stoichiometry ratio (φ), pH effect, atmosphere and initiation type. These determine the final properties of the oxide materials, providing the potential to reach different morphologies, which are essential for their final applications. This Review article focuses on the crucial parameters in SCS and how these affect the overall materials properties from nanostructures to thin films. To finalize, special attention is given to the application of SCS to form metal oxide thin films at low temperature and their application in thin film transistors (TFTs).

Ever-evolving catalyst advances in synthetic protocols using water as a reaction medium have enriched the understanding of sustainable organic chemistry. Because conventional classification and definitions were ambivalent, it is proposed here that catalytic reactions using water be collectively called to be "in water", with further classification into seven types. When accelerated in water as heterogeneous mixtures, the reactions can be regarded as following an "on-water" mechanism. The original term "on water" coined by Sharpless is incongruous with catalytic reactions, whereas on-water used in this review covers all the interfaces involving water where chemical reactions are accelerated. As a result of the unconcluded dispute on the antiquated catalyst-free "on water" model, the modified model defines three water layers: water molecules that are oriented to extrude protons toward the oil phase in the inner layer, those enwrapped by a secondary layer, and finally the bulk water layer. In light of the latitudinous outlook on the role of water at the interface, selected examples of…

Since the discovery that the so-called "double-bond" rule could be broken, the field of molecular main group multiple bonds has expanded rapidly. With the majority of homodiatomic double and triple bonds realised within the p-block, along with many heterodiatomic combinations, this Minireview examines the reactivity of these compounds with a particular emphasis on small molecule activation. Furthermore, whilst their ability to act as transition metal mimics has been explored, their catalytic behaviour is somewhat limited. This Minireview aims to highlight the potential of these complexes towards catalytic application and their role as synthons in further functionalisations making them a versatile tool for the modern synthetic chemist.

Developing macrocyclic peptides that can reach intracellular targets is a significant challenge. This review discusses the most recent strategies used to develop cell permeable cyclic peptides that maintain binding to their biological target inside the cell. Macrocyclic peptides are unique from small molecules because traditional calculated physical properties are unsuccessful for predicting cell membrane permeability. Peptide synthesis and experimental membrane permeability is the only strategy that effectively differentiates between cell permeable and cell impermeable molecules. Discussed are chemical strategies, including backbone N-methylation and stereochemical changes, which have produced molecular scaffolds with improved cell permeability. However, these improvements often come at the expense of biological activity as chemical modifications alter the peptide conformation, frequently impacting the compound's ability to bind to the target. Highlighted is the most promising approach, which involves side-chain alterations that improve cell permeability without impact binding…

Among the available methods to increase the molecular complexity, sigmatropic rearrangements occupy a distinct position in organic synthesis. Despite being known for over a century sigmatropic rearrangement reactions of ylides via carbene transfer reaction have only recently come of age. Most of the ylide mediated rearrangement processes involve rupture of a σ-bond and formation of a new bond between π-bond and negatively charged atom followed by simultaneous redistribution of π-electrons. This minireview describes the advances in this research area made in recent years, which now opens up metal-catalyzed enantioselective sigmatropic rearrangement reactions, metal-free photochemical rearrangement reactions and novel reaction pathways that can be accessed via ylide intermediates.

Abstract Although the development of single‐molecule magnets (SMMs) is rapid, there are only two families of high energy barrier ( U eff ) dysprosium(III) SMMs known so far: the cyclopentadienyl (Cp) family with a sandwich structure and the pentagonal‐bipyramidal (PB) family with D 5 h symmetry. These high‐barrier SMMs, which usually possess U eff >500 cm −1 allow the separate study of the four magnetic relaxation paths, namely, direct, quantum tunnelling, Raman and Orbach processes, in detail. Whereas the first family is chemically more challenging to modify the Cp rings, it is shown herein that the latter family, with the common formulae [DyX 1 X 2 (L eq ) 5 ] + , such as X 1 /X 2 = − OCMe 3 , − OSiMe 3 , − OPh, Cl − or Br − ; L eq =THF/pyridine/4‐methylpyridine, can be readily fine‐tuned with a range of axial and equatorial ligands by simple substitution reactions. This allows unambiguous confirmation that the U eff mainly depends on the identity of X 1 and X 2 , rather than on L eq . More importantly, the fitted parameters are barrier dependent. If X 1 is an O donor and X 2 is a…

Viscosity, as a vital microenvironment parameter, is tightly associated with multitudinous cellular processes and diseases. Recently, precise visualization of viscosity has started to arouse more and more interest. However, owing to the complicated character, it is still a huge challenge to directly observe viscosity in living systems. In this regard, mounting fluorescence probes are being increasingly fabricated to map viscosity inside live cells and small animals. In this minireview, the viscosity-sensitive small molecular fluorescent probes used in bioimaging are comprehensively summarized, mainly focusing on the last three years. Moreover, the current challenges and opportunities for the development of viscosity-specific fluorescent probes will be discussed.

Direct mechanocatalysis describes catalytic reactions under the involvement of mechanical energy with the distinct feature of milling equipment itself being the catalyst. This novel type of catalysis features no solubility challenges of the catalysts nor the substrate and on top offering most facile way of separation.

Photochemical transformations of molecular building blocks have become an important and widely recognized research field in the past decade. Detailed and deep understanding of novel photochemical catalysts and reaction concepts with visible light as the energy source has enabled a broad application portfolio for synthetic organic chemistry. In parallel, continuous-flow chemistry and microreaction technology have become the basis for thinking and doing chemistry in a novel fashion with clear focus on improved process control for higher conversion and selectivity. As can be seen by the large number of scientific publications on flow photochemistry in the recent past, both research topics have found each other as exceptionally well-suited counterparts with high synergy by combining chemistry and technology. This review will give an overview on selected reaction classes, which represent important photochemical transformations in synthetic organic chemistry, and which benefit from mild and defined process conditions by the transfer from batch to continuous-flow mode.

Abstract Luminescent cyclometalated complexes [M(C^N^N)CN] (M=Pt, Pd; HC^N^N=pyridinyl‐ (M=Pt 1, Pd 5), benzyltriazolyl‐ (M=Pt 2), indazolyl‐ (M=Pt 3, Pd 6), pyrazolyl‐phenylpyridine (M=Pt 4)) decorated with cyanide ligand, have been explored as nucleophilic building blocks for the construction of halogen‐bonded (XB) adducts using IC6F5 as an XB donor. The negative electrostatic potential of the CN group afforded CN⋅⋅⋅I noncovalent interactions for platinum complexes 1–3; the energies of XB contacts are comparable to those of metallophilic bonding according to QTAIM analysis. Embedding the chromophore units into XB adducts 1–3⋅⋅⋅IC6F5 has little effect on the charge distribution, but strongly affects Pt⋅⋅⋅Pt bonding and π‐stacking, which lead to excited states of MMLCT (metal–metal‐to‐ligand charge transfer) origin. The energies of these states and the photoemissive properties of the crystalline materials are primarily determined by the degree of aggregation of the luminophores via metal–metal interactions. The adduct formation depends on the nature of the metal and the structure of…

Abstract Photocatalytic CO2 reduction is a revolutionary approach to solve imminent energy and environmental issues by replicating the ingenuity of nature. The past decade has witnessed an impetus in the rise of two‐dimensional (2D) structure materials as advanced nanomaterials to boost photocatalytic activities. In particular, the use of 2D carbon‐based materials is deemed as highly favorable, not only as a green material choice, but also due to their exceptional physicochemical and electrical properties. This Review article presents a diverse range of alterations and compositions derived from 2D carbon‐based nanomaterials, mainly graphene and graphitic carbon nitride (g‐C3N4), which have remarkably ameliorated the photocatalytic CO2 performance. Herein, the rational design of the photocatalyst systems with consideration of the aspect of dimensionality and the resultant heterostructures at the interface are systematically analyzed to elucidate an insightful perspective on this pacey subject. Finally, a conclusion and outlook on the limitations and prospects of the cutting‐edge…

The fascinating properties of single-layer graphene isolated by mechanical exfoliation have inspired extensive research efforts toward two-dimensional (2D) materials. Layered compounds serve as precursors for atomically thin 2D materials (briefly, 2D nanomaterials) owing to their strong intraplane chemical bonding but weak interplane van der Waals interactions. There are newly emerging 2D materials beyond graphene, and it is becoming increasingly important to develop cost-effective, scalable methods for producing 2D nanomaterials with controlled microstructures and properties. The variety of developed synthetic techniques can be categorized into two classes: bottom-up and top-down approaches. Of top-down approaches, the exfoliation of bulk 2D materials into single or few layers is the most common. This review highlights chemical and physical exfoliation methods that allow for the production of 2D nanomaterials in large quantities. In addition, remarkable examples of utilizing exfoliated 2D nanomaterials in energy and environmental applications are introduced.

are a large group of inorganic materials that can contain a variety of cations from all parts of the Periodic Table and that have diverse properties of application in fields ranging from electronics, energy storage to photocatalysis. Solvothermal synthesis routes to these materials have become increasingly investigated in the past decade as a means of direct crystallisation of the solids from solution. These methods have significant advantages leading to adjustment of crystal form from the nanoscale to the micron-scale, the isolation of compositions not possible using conventional solid-state synthesis and in addition may lead to scalable processes for producing materials at moderate temperatures. These aspects are reviewed, with examples taken from the past decade's literature on the solvothermal synthesis of perovskites with a systematic survey of B-site cations, from transition metals in Groups 4-8 and main group elements in Groups 13, 14 and 15, to solid solutions and heterostructures. As well as hydrothermal reactions, the use of various solvents and solution additives are…

Abstract The most important stereodynamic feature of carbo[ n ]helicenes is the interconversion of their enantiomers. The Gibbs activation energy (Δ G ≠ ( T )) of this process, which determines the rate of enantiomerization, dictates the configurational stability of [ n ]helicenes. High values of Δ G ≠ ( T ) are required for applications of functional chiral molecules incorporating [ n ]helicenes or helicene substructures. This minireview provides an overview of the mechanism, recent developments, and factors affecting the enantiomerization of [ n ]helicenes, which will accelerate the design process of configurationally stable functional chiral molecules based on helicene substructures. Additionally, this minireview addresses the misconception and irregularities in the recent literature on how the terms “ racemization ” and “ enantiomerization ” are used as well as how the activation parameters are calculated for [ n ]helicenes and related compounds.

Over the past decades, N-heterocyclic carbene (NHC) organocatalysis has undergone a flourish of development on the basis of closed-shell reaction paths. By contrast, the emerging area of single-electron transfer (SET) reactions enabled by NHC catalysis still remain underdeveloped, but offer plenty of opportunities to develop new catalytic modes and useful synthetic methods. A number of interesting transformations were triggered by the SET process from the electron-rich Breslow intermediates to various single-electron acceptors. In additions, recent studies revealed that the Breslow radical cations could also be generated by single-electron reduction of the electron-deficient acyl azolium intermediates. These discoveries open a new avenue for NHC organocatalysis to harness radical reactions. The present review will focus on the exciting advancements in the dynamic area of radical NHC organocatalysis.

As concerns about the safety of lithium-ions batteries (LIBs) increases, aqueous zinc-ion batteries (ZIBs) with a lower cost, higher safety, and higher co-efficiency have attracted more and more interest. However, finding suitable cathode materials is still an urgent problem in ZIBs. In recent years, a lot of significant works have been reported, including manganese-based cathodes, vanadium-based cathodes, Prussian blue analog-based materials, and sustainable quinone cathodes. In this review, some typical cathode materials are introduced. The detailed storage mechanisms and methods for improving the reaction kinetics of the zinc ions are summarized. Finally, the issues, challenges, and the research directions are provided.

Acenes, consisting of linearly fused benzene rings, are an important fundamental class of organic compounds with various applications. Hexacene is the largest acene that was synthesized and isolated in the 20th century. The next largest member of the acene family, heptacene, was observed in 2007 and since then significant progress in preparing acenes has been reported. Significantly larger acenes, up to undecacene, could be studied by means of low-temperature matrix isolation spectroscopy with in situ photolytic generation, and up to dodecacene by means of on-surface synthesis employing innovative precursors and highly defined crystalline metal surfaces under ultrahigh vacuum conditions. The review summarizes recent experimental and theoretical advances in the area of acenes that give a significantly deeper insight into the fundamental properties and nature of the electronic structure of this fascinating class of organic compounds.

The extension of conjugated organoboranes from monomeric species to oligomers, macrocycles, and polymers offers access to a plethora of fascinating new materials. The p-π* conjugation between empty orbitals on boron and the conjugated linkers not only affects the electronic structure and optical properties, but also enables mutual interactions between electron-deficient boron centers. The unique properties of these electron-deficient π-conjugated systems are exploited in highly luminescent materials, organic optoelectronic devices, and sensing applications.

Since the concept of deep learning (DL) was formally proposed in 2006, it has had a major impact on academic research and industry. Nowadays, DL provides an unprecedented way to analyze and process data with demonstrated great results in computer vision, medical imaging, natural language processing, and so forth. Herein, applications of DL in NMR spectroscopy are summarized, and a perspective for DL as an entirely new approach that is likely to transform NMR spectroscopy into a much more efficient and powerful technique in chemistry and life sciences is outlined.

Metal-air batteries (MABs) and reversible fuel cells (RFCs) rely on the bifunctional oxygen catalysts for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). Finding efficient bifunctional oxygen catalysts is the ultimate goal and it has attracted a great deal of attention. The dilemma is that a good ORR catalyst is not necessarily efficient for OER, and vice versa. Thus, the development of a new type of bifunctional oxygen catalysts should ensure that the catalysts exhibit high activity for both OER and ORR. Composites with multicomponents for active centers supported on highly conductive matrices could be able to meet the challenges and offering new opportunities. In this Review, the evolution of bifunctional catalysts is summarized and discussed aiming to deliver high-performance bifunctional catalysts with low overpotentials.

Abstract Dinitrogen (N 2 ) is the most abundant gas in Earth's atmosphere, but its inertness hinders its use as a nitrogen source in the biosphere and in industry. Efficient catalysts are hence required to ov. ercome the high kinetic barriers associated to N 2 transformation. In that respect, molecular complexes have demonstrated strong potential to mediate N 2 functionalization reactions under mild conditions while providing a straightforward understanding of the reaction mechanisms. This Review emphasizes the strategies for N 2 reduction and functionalization using molecular transition metal and actinide complexes according to their proposed reaction mechanisms, distinguishing complexes inducing cleavage of the N≡N bond before (dissociative mechanism) or concomitantly with functionalization (associative mechanism). We present here the main examples of stoichiometric and catalytic N 2 functionalization reactions following these strategies.

The recent progress of charge-transfer complexes (CTCs) for application in many fields, such as charge transport, light emission, nonlinear optics, photoelectric conversion, and external stimuli response, makes them promising candidates for practical utility in pharmaceuticals, electronics, photonics, luminescence, sensors, molecular electronics and so on. Multicomponent CTCs have been gradually designed and prepared as novel organic active semiconductors with ideal performance and stability compared to single components. In this review, we mainly focus on the recently reported development of various charge-transfer complexes and their performance in field-effect transistors, light-emitting devices, lasers, sensors, and stimuli-responsive behaviors.

Sulfonimidamides present exciting opportunities as chiral isosteres of sulfonamides, with potential for additional directional interactions. Here, we present the first modular enantioselective synthesis of sulfonimidamides, including the first stereoselective synthesis of enantioenriched sulfonimidoyl fluorides, and studies on their reactivity. A new route to sulfonimidoyl fluorides is presented from solid bench-stable, N-Boc-sulfinamide (Boc=tert-butyloxycarbonyl) salt building blocks. Enantioenriched arylsulfonimidoyl fluorides are shown to be readily racemised by fluoride ions. Conditions are developed, which trap fluoride and enable the stereospecific reaction of sulfonimidoyl fluorides with primary and secondary amines (100 % es, es=enantiospecificity) generating sulfonimidamides with up to 99 % ee. Aryl and alkyl sulfonimidoyl fluoride reagents are suitable for mild late stage functionalisation reactions, exemplified by coupling with a selection of complex amines in marketed drugs.

Abstract Since the last decade, the focus in the area of single‐molecule magnets (SMMs) has been shifting constructively towards the development of single‐ion magnets (SIMs) based on transition metals and lanthanides. Although ground‐breaking results have been witnessed for Dy III ‐based SIMs, significant results have also been obtained for some mononuclear transition metal SIMs. Among others, studies based on Co II ion are very prominent as they often exhibit high magnetic anisotropy or zero‐field splitting parameters and offer a large barrier height for magnetisation reversal. Although Co II possibly holds the record for having the largest number of zero‐field SIMs known for any transition metal ion, controlling the magnetic anisotropy in these systems are is still a challenge. In addition to the modern spectroscopic techniques, theoretical studies, especially ab initio CASSCF/NEVPT2 approaches, have been used to uncover the electronic structure of various Co II SIMs. In this article, with some selected examples, the aim is to showcase how varying the coordination number from two…

Hydrogen-borrowing catalysis represents a powerful method for the alkylation of amine or enolate nucleophiles with non-activated alcohols. This approach relies upon a catalyst that can mediate a strategic series of redox events, enabling the formation of C-C and C-N bonds and producing water as the sole by-product. In the majority of cases these reactions have been employed to target achiral or racemic products. In contrast, the focus of this Minireview is upon hydrogen-borrowing-catalysed reactions in which the absolute stereochemical outcome of the process can be controlled. Asymmetric hydrogen-borrowing catalysis is rapidly emerging as a powerful approach for the synthesis of enantioenriched amine and carbonyl containing products and examples involving both C-N and C-C bond formation are presented. A variety of different approaches are discussed including use of chiral auxiliaries, asymmetric catalysis and enantiospecific processes.

The depletion of fossil fuels has accelerated the search for clean, sustainable, scalable, and environmentally friendly alternative energy sources. Hydrogen is a potential energy carrier because of its advantageous properties, and the electrolysis of water is considered as an efficient method for its industrial production. However, the high-energy conversion efficiency of electrochemical water splitting requires cost-effective and highly active electrocatalysts. Therefore, researchers have aimed to develop high-performance electrode materials based on non-precious and abundant transition metals for conversion devices. Moreover, to further reduce the cost and complexity in real-world applications, bifunctional catalysts that can be simultaneously active on both the anodic (i.e., oxygen evolution reaction, OER) and cathodic (i.e., hydrogen evolution reaction, HER) sides are economically and technically desirable. This Minireview focuses on the recent progress in transition-metal-based materials as bifunctional electrocatalysts, including several promising strategies to promote…

Abstract Four types of carbon dots (CDs) with various color (blue, green, yellow, and red) emissions have been synthesized under solvent‐free conditions from citric acid and different nitrogen sources (DMF, urea, ethanamide, and formamide). By detailed characterization and comparison, it is confirmed that the graphitized sp 2 conjugated domain and surface functional groups such as C−O and C=N play synergetic roles in adjusting the fluorescence properties. Notably, the size effect is not the dominant mechanism to achieve multi‐color fluorescence emissions in this work. The structural configuration of the carbon dots further influences the energy band structure, as demonstrated in simplified energy level diagrams. An absorption peak at approximately 560 nm appears in the visible light region for red‐emitting CDs, assigned to an n→π* transition of the aromatic structure, thus introducing a new surface state energy level, resulting in a reduction in the energy of electron transition and the expansion into the visible region of the UV/Vis spectrum. Taking advantage of the diverse…

Structural analysis of modern pharmaceutical practices allows for the identification of two rapidly growing trends: the introduction of tailor-made amino acids and the exploitation of fluorinated motifs. Curiously, the former represents one of the most ubiquitous classes of naturally occurring compounds, whereas the latter is the most xenobiotic and comprised virtually entirely of man-made derivatives. Herein, 39 selected compounds, featuring both of these traits in the same molecule, are profiled. The total synthesis, source of the corresponding amino acids and fluorinated residues, and medicinal chemistry aspects and biological properties of the molecules are discussed.

Abstract Perovskite solar cells have gained immense interest from researchers owing to their good photophysical properties, low‐cost production, and high power conversion efficiencies. Hole transport materials (HTMs) play a dominant role in enhancing the power conversion efficiencies (PCEs) and long diffusion length of holes and electrons in perovskite solar cells. In hole transport materials, modification of π‐linkers has proved to be an efficient approach for enhancing the overall PCE of perovskite solar cells. In this work, π‐linker modification of a recently synthesized H−Bi molecule (R) is achieved with novel π‐linkers. After structural modifications, ten novel HTMs (HB1–HB10) with a D−π−D backbone are obtained. The structure–property relationship, and optoelectronic and photovoltaic characteristics of these newly designed hole transport materials are examined comprehensively and compared with reference molecules. In addition, different geometric parameters are also examined with the assistance of density functional theory (DFT) and time‐dependent DFT. All the designed…

Abstract Resistance to chemotherapy is a current clinical problem, especially in the treatment of microbial infections and cancer. One strategy to overcome this is to make new derivatives of existing drugs by conjugation to organometallic fragments, either by an appropriate linker, or by direct coordination of the drug to a metal. We illustrate this with examples of conjugated organometallic metallocene sandwich and half‐sandwich complexes, Ru II and Os II arene, and Rh III and Ir III cyclopentadienyl half‐sandwich complexes. Ferrocene conjugates are particularly promising. The ferrocene–chloroquine conjugate ferroquine is in clinical trials for malaria treatment, and a ferrocene‐tamoxifen derivative (a ferrocifen) seems likely to enter anticancer trails soon. Several other examples illustrate that organometallic conjugation can restore the activity of drugs to which resistance has developed.

Abstract Sodium‐ion batteries (SIBs) have attracted much attention due to their abundance, easy accessibility, and low cost. All of these advantages make them potential candidates for large‐scale energy storage. The P2‐type layered transition‐metal oxides (Na x TMO 2 ; TM=Mn, Co, Ni, Ti, Fe, V, Cr, and a mixture of multiple elements) exhibit good Na + ion conductivity and structural stability, which make them an excellent choice for the cathode materials of SIBs. Herein, the structural evolution, anionic redox reaction, some challenges, and recent progress of Na x TMO 2 cathodes for SIBs are reviewed and summarized. Moreover, a detailed understanding of the relationship of chemical components, structures, phase compositions, and electrochemical performance is presented. This Review aims to provide a reference for the development of P2‐type layered transition‐metal oxide cathode materials for SIBs.

It has been hypothesised that drugs in the chemical space "beyond the rule of 5" (bRo5) must behave as molecular chameleons to combine otherwise conflicting properties, including aqueous solubility, cell permeability and target binding. Evidence for this has, however, been limited to the cyclic peptide cyclosporine A. Herein, we show that the non-peptidic and macrocyclic drugs roxithromycin, telithromycin and spiramycin behave as molecular chameleons, with rifampicin showing a less pronounced behaviour. In particular roxithromycin, telithromycin and spiramycin display a marked, yet limited flexibility and populate significantly less polar and more compact conformational ensembles in an apolar than in a polar environment. In addition to balancing of membrane permeability and aqueous solubility, this flexibility also allows binding to targets that vary in structure between species. The drugs' passive cell permeability correlates to their 3D polar surface area and corroborate two theoretical models for permeability, developed for cyclic peptides. We conclude that molecular…

Abstract In the past few decades, processes that involve transition‐metal catalysis have represented a major part of the synthetic chemist′s toolbox. Recently, the interest has shifted from the well‐established cross‐coupling reactions to C−H bond functionalization, thus making it a current frontier of transition‐metal‐catalyzed reactions. Constant progress in this field has led to the discovery of enantioselective methods to generate and control various types of stereogenic elements, thereby demonstrating its high value to generate scalemic chiral molecules. The present review is dedicated to enantioselective Pd 0 ‐catalyzed C−H activation, which may be considered as an evolution of Pd 0 ‐catalyzed cross‐couplings, with a focus on the different chiral ligands and catalysts that enable these transformations.

Polycycles are abundantly present in numerous advanced chemicals, functional materials, bioactive molecules and natural products. However, the strategies for the synthesis of polycycles are limited to classical reactions and transition metal-catalyzed cross-coupling reactions, requiring pre-functionalized starting materials and lengthy synthetic operations. The emergence of novel approaches shows great promise for the fields of organic/medicinal/materials chemistry. Among them, transition metal-catalyzed C-H activation followed by intermolecular annulation reactions prevail, due to their straightforward manner with high atom- and step-economy, providing rapid, concise and efficient methods for the construction of diverse polycycles. Several strategies have been developed for the synthesis of polycycles, relying on sequential multiple C-H activation/annulation, or combination of C-H activation/annulation and further interaction with a proximal group, or merger of C-H activation with a cycloaddition reaction, or in situ formation of the directing group. These are attractive,…

The integrated advantages of organic electrode materials and potassium metal make the organic potassium-ion batteries (OPIBs) promising secondary batteries. This review summarizes the latest research progress on OPIBs according to the different types of electrode materials (namely, organic small molecules compounds, polymers, and frameworks (metal-organic frameworks (MOFs), covalent organic frameworks (COFs)). Additionally, the research prospects and outlook for OPIBs are also provided.

Abstract Three six‐coordinate Dy III single‐molecule magnets (SMMs) [Dy(O t Bu) 2 (L) 4 ] + with local D 4h symmetry are obtained by optimizing the equatorial ligands. One of the compounds with L=4‐phenylpyridine shows an energy barrier ( U eff ) of 2075(11) K, which is the third largest U eff , and the first U eff >2000 K for SMMs with axial‐type symmetry so far. Ab initio analysis indicates that the exceptional uniaxial magnetic anisotropy is deeply related to the axially compressed octahedral geometry. This work provides a new insight into the local D 4h symmetry for high‐performance SMMs.

Abstract Effective capture of radioactive iodine is of paramount importance for the safe and long‐term storage of fission products in the nuclear fuel cycle. Herein, a series of functionalized Th‐UiO‐66 MOFs was employed as a model to investigate the effects of substituents on iodine adsorption in both solution and vapor states. Sorption studies revealed that the electro‐donating amino group exhibits the most positive role on increasing the removal rate of iodine from cyclohexane and the uptake capacity of iodine vapor. Particularly, the disubstituted Th‐UiO‐66‐(NH 2 ) 2 can effectively remove 91.9 % of iodine (300 mg L −1 ) from cyclohexane and capture 969 mg g −1 iodine vapor, significantly higher than 59.6 % and 334 mg g −1 of untagged Th‐UiO‐66, respectively. In addition, the substituent effect on the radiolytic stability of MOFs was for the first time investigated, leading to the unearthing of one of the most radioresistant MOFs Th‐UiO‐66‐NH 2 reported to date.

Cyanine dyes carrying quinoline moieties are an important class of organic molecules that are of great interest for applications in many fields like medicine, pharmacology, and engineering. Despite their exceptional properties, such as stability, high molar extinction coefficients, and high pH-sensitivity, this class of dyes has been less analyzed and reviewed in the last few decades. Therefore, this review article focuses on discussing the history of quinoline compounds, various synthetic routes to prepare quinolinium salts and symmetrical and asymmetrical mono-, di-, tri-, penta- and heptamethine cyanine dyes, containing quinoline moieties, together with their optical properties and applications as photosensitizers in photodynamic therapy, probes in biomolecules for labeling of nucleic acids, as well as imaging agents.

Organic superbases are a distinct and increasingly utilized class of Brønsted base that possess properties complementary to common inorganic bases. This Concept article discusses recent applications of commercial organic superbases in modern synthetic methodologies. Examples of the advantages of organic superbases in three areas are highlighted, including the discovery of new base-catalyzed reactions, the optimization of reactions that require stoichiometric Brønsted base, and in high-throughput experimentation technology.

C(1)-Ammonium enolates are powerful, catalytically generated synthetic intermediates applied in the enantioselective α-functionalisation of carboxylic acid derivatives. This minireview describes the recent developments in the generation and application of C(1)-ammonium enolates from various precursors (carboxylic acids, anhydrides, acyl imidazoles, aryl esters, α-diazoketones, alkyl halides) using isothiourea Lewis base organocatalysts. Their synthetic utility in intra- and intermolecular enantioselective C-C and C-X bond forming processes on reaction with various electrophiles will be showcased utilising two distinct catalyst turnover approaches.

The development of carbon nanobelts and related belt-shaped polycyclic aromatic hydrocarbons has gained momentum in recent years. This Minireview focuses on the synthetic strategies used in constructing these aesthetically appealing molecular nanocarbons. Examples of carbon nanobelts and related belt-shaped polycyclic aromatic hydrocarbons reported in recent years as well as some representative synthetic attempts in earlier times are discussed.

Abstract Recently there has been great interest in the reactivity of transition‐metal (TM) centers towards white phosphorus (P4). This has ultimately been motivated by a desire to find TM‐mediated alternatives to the current industrial routes used to transform P4 into myriad useful P‐containing products, which are typically indirect, wasteful, and highly hazardous. Such a TM‐mediated process can be divided into two steps: activation of P4 to generate a polyphosphorus complex TM‐Pn, and subsequent functionalization of this complex to release the desired phosphorus‐containing product. The former step has by now become well established, allowing the isolation of many different TM‐Pn products. In contrast, productive functionalization of these complexes has proven extremely challenging and has been achieved only in a relative handful of cases. In this review we provide a comprehensive summary of successful TM‐Pn functionalization reactions, where TM‐Pn must be accessible by reaction of a TM precursor with P4. We hope that this will provide a useful resource for continuing efforts that…

This Minireview summarizes the recent progress of stimuli-responsive purely organic phosphorescence materials. Organic phosphorescence is closely related to the intermolecular interactions, because such interactions are beneficial to promote spin orbital coupling (SOC) and boost intersystem cross (ISC) efficiency and finally are conducive to satisfactory phosphorescence. It is found that the intermolecular interactions, which are essential for organic phosphorescence, are easily disturbed by external stimuli such as mechanical force, photon, acid, chemical vapor, leading to the luminescence change. According to this principle, various purely organic phosphorescence materials sensitive to external stimuli have been developed. This Minireview categorizes reported stimuli-responsive purely organic phosphorescence materials on the basis of different stimuli, including mechanochromism, mechanoluminescence, photoactivity, acid-responsiveness and other stimuli. Some prospective strategies for constructing stimuli-responsive purely organic phosphorescence molecules are provided.

Abstract A comprehensive model to describe the water stability of prototypical metal–organic frameworks (MOFs) is derived by combining different types of theoretical and experimental approaches. The results provide an insight into the early stages of water‐triggered destabilization of MOFs and allow detailed pathways to be proposed for the degradation of different MOFs under aqueous conditions. The essential elements of the approach are computing the p K a values of coordinated water molecules and geometry relaxations. Variable‐temperature and pH infrared spectroscopy techniques are used to corroborate the main findings. The model developed herein helps to explain stability limits observed for several prototypical MOFs, including MOF‐5, HKUST‐1, UiO‐66, and MIL‐101‐Cr, in aqueous solutions, and thus, provides an insight into the possible degradation pathways in acidic and basic environments. The formation of a metal hydroxide through the autoprotolysis of metal‐coordinated water molecules and the strength of carboxylate–metal interactions are suggested to be two key players that…

The thioredoxin system is highly conserved system found in all living cells and comprises NADPH, thioredoxin, and thioredoxin reductase. This system plays a critical role in preserving a reduced intracellular environment, and its involvement in regulating a wide range of cellular functions makes it especially vital to cellular homeostasis. Its critical role is not limited to healthy cells, it is also involved in cancer development, and is overexpressed in many cancers. This makes the thioredoxin system a promising target for cancer drug development. As such, over the last decade, many inhibitors have been developed that target the thioredoxin system, most of which are small molecules targeting the thioredoxin reductase C-terminal redox center. A few inhibitors of thioredoxin have also been developed. We believe that more efforts should be invested in developing protein/peptide-based inhibitors against both thioredoxin reductase and/or thioredoxin.

Urea, which has both hydrogen bond acceptor and donor moieties, is an ideal structure for a supramolecular synthon. Various supramolecules having ureido group(s) have been widely developed. This article summarizes recent developments of urea derivatives that exhibit various functions: i) supramolecular capsules that form discrete urea-urea intermolecular hydrogen bonds, ii) supramolecular polymers that form continuous urea-urea intermolecular hydrogen bonds, iii) supramolecular gels that form continuous urea-urea intermolecular hydrogen bonds, iv) artificial host molecules based on the molecular recognition ability of the ureido group, and v) catalytic reactions developed by utilizing the molecular recognition ability of the ureido group.

Abstract In this study, we demonstrate that an Mn‐doped ultrathin Ni‐MOF nanosheet array on nickel foam (Mn0.1‐Ni‐MOF/NF) serves as a highly capacitive and stable supercapacitor positive electrode. The Mn0.1‐Ni‐MOF/NF shows an areal capacity of 6.48 C cm−2 (specific capacity C: 1178 C g−1) at 2 mA cm−2 in 6.0 m KOH, outperforming most reported MOF‐based materials. More importantly, it possesses excellent cycle stability to maintain 80.6 % capacity after 5000 cycles. An asymmetric supercapacitor device utilizing Mn0.1‐Ni‐MOF/NF as the positive electrode and activated carbon as the negative electrode attains a high energy density of 39.6 Wh kg−1 at 143.8 Wkg−1 power density with a capacitance retention of 83.6 % after 5000 cycles.

Abstract After briefly reviewing the applications of the coordination ability indices proposed earlier for anions and solvents toward transition metals and lanthanides, a new analysis of crystal structures is applied now to a much larger number of coordinating species: anions (including those that are present in ionic solvents), solvents, amino acids, gases, and a sample of neutral ligands. The coordinating ability towards s‐block elements is now also considered. The effect of several factors on the coordinating ability will be discussed: (a) the charge of an anion, (b) the chelating nature of anions and solvents, (c) the degree of protonation of oxo‐anions, carboxylates and amino carboxylates, and (d) the substitution of hydrogen atoms by methyl groups in NH3, ethylenediamine, benzene, ethylene, pyridine and aldehydes. Hit parades of solvents and anions most commonly used in the areas of transition metal, s‐block and lanthanide chemistry are deduced from the statistics of their presence in crystal structures.

A judiciously oriented external electric field (OEEF) can catalyze a wide range of reactions and can even induce endo/exo stereoselectivity of cycloaddition reactions. The Diels-Alder reaction between cyclopentadiene and maleic anhydride is studied by using quantitative activation strain and Kohn-Sham molecular orbital theory to pinpoint the origin of these catalytic and stereoselective effects. Our quantitative model reveals that an OEEF along the reaction axis induces an enhanced electrostatic and orbital interaction between the reactants, which in turn lowers the reaction barrier. The stronger electrostatic interaction originates from an increased electron density difference between the reactants at the reactive center, and the enhanced orbital interaction arises from the promoted normal electron demand donor-acceptor interaction driven by the OEEF. An OEEF perpendicular to the plane of the reaction axis solely stabilizes the exo pathway of this reaction, whereas the endo pathway remains unaltered and efficiently steers the endo/exo stereoselectivity. The influence of the OEEF on…

Novel nanomaterials and advanced nanotechnology continuously push forward the rapid development of sustainable energy conversion and storage equipment. An emerging family of two-dimensional transition-metal carbides, nitrides and carbonitrides, also known as MXenes, have attracted increasing attention and in depth investigation. Benefitting from their unique intrinsic properties, MXenes have attracted significant attention and they have been considered as promising candidate materials for the development of environmentally friendly energy resources. A large number of studies show that MXenes have great potential in energy conversion and storage fields. Despite of their exceptional properties, MXenes also have some inherent characteristics, such as low capacities and unstable retention performances, which severely hinder their prospect applications in energy conversion and storage fields. In this Minireview, the latest progress on MXenes and their hybrid composites with small molecules, polymers, carbon or metal ions, and their applications in energy conversion and storage fields is…

Over the last two decades, the development of chemical biology and the need for more defined protein conjugates have fostered active research on new bioconjugation techniques. In particular, a wide range of biorthogonal labelling strategies have been reported to functionalise the phenol side chain of tyrosines (Tyr). Tyr occur at medium frequency and are partially buried at the protein surface, offering interesting opportunities for site-selective labelling of the most reactive residues. Tyr-targeting has proved effective for designing a wide range of important biomolecules including antibody-drug conjugates, fluorescent or radioactive protein probes, glycovaccines, protein aggregates, and PEG conjugates. Innovative methods have also been reported for site-specific labelling with ligand-directed anchors and for the specific affinity capture of proteins. This review will present and discuss these promising alternatives to the conventional labelling of the nucleophilic lysine and cysteine residues.

Transition metal catalyzed cross-coupling reactions are important in chemical synthesis for the formation of C-C and C-heteroatom bonds. Suitable catalysts are frequently based on palladium or nickel, and lately the cheaper and more abundant first-row transition metal element has been much in focus. The combination of nickel catalysis with photoredox chemistry has opened new synthetic possibilities, and in some cases electronically excited states of nickel complexes play a key role. This is a remarkable finding, because photo-excited metal complexes are underexplored in the context of organic bond-forming reactions, and because the photophysics and the photochemistry of first-row transition metal complexes are underdeveloped in comparison with their precious metal-based congeners. Consequently, there is much potential for innovation at the interface of synthetic-organic and physical-inorganic chemistry. This Minireview highlights recent key findings in light-driven nickel catalysis and identifies essential concepts for the exploitation of photoactive nickel complexes in organic…

Cancer stem cells (CSC) constitute a cell subpopulation in solid tumors that is responsible for resistance to conventional chemotherapy, metastasis and cancer relapse. The natural product Salinomycin can selectively target this cell niche by directly interacting with lysosomal iron, taking advantage of upregulated iron homeostasis in CSC. Here, inhibitors of the divalent metal transporter 1 (DMT1) have been identified that selectively target CSC by blocking lysosomal iron translocation. This leads to lysosomal iron accumulation, production of reactive oxygen species and cell death with features of ferroptosis. DMT1 inhibitors selectively target CSC in primary cancer cells and circulating tumor cells, demonstrating the physiological relevance of this strategy. Taken together, this opens up opportunities to tackle unmet needs in anti-cancer therapy.

Abstract Visible‐light‐photocatalyzed methods employed in synthetic transformations present attractive properties such as environmentally friendly, safety, availability and excellent functional group tolerance. In this regard, research on the visible‐light photocatalytic incorporation of the trifluoromethyl CF3 moiety into organic substrates, in particular, has contributed to a clear evolution of the field of photocatalysis. Although this particular area is constantly evolving and has been reviewed, the last five years have experienced an outburst of seminal and significant photocatalytic trifluoromethylation examples that are leading the way and opening new synthetic avenues. Recent review articles on Ru‐ and Ir‐based photocatalytic trifluoromethylation reactions have borne witness of this evolution. Although this account will show the new Ru‐ and Ir‐based photocatalytic trifluoromethylations, Sections 2 and 3 will also illustrate other photocatalytic systems, such as organic dyes, organic semiconductors and newly‐developed all‐organic photocatalysts. All the known and reviewed…

Owing to their non-toxic, stable, inexpensive properties, carboxylic acids are considered as environmentally benign alternatives as coupling partners in various organic transformations. Electrochemical mediated decarboxylation of carboxylic acid has emerged as a new and efficient methodology for the construction of carbon-carbon or carbon-heteroatom bonds. Compared with transition-metal catalysis and photoredox catalysis, electro-organic decarboxylative transformations are considered as a green and sustainable protocol due to the absence of chemical oxidants and strong bases. Further, it exhibits good tolerance with various functional groups. In this Minireview, we summarize the recent advances and discoveries on the electrochemical decarboxylative transformations on C-C and C-heteroatoms bond formations.

Abstract The study reports the first attempt to address the interplay between surface and bulk in hydride formation in ceria (CeO2) by combining experiment, using surface sensitive and bulk sensitive spectroscopic techniques on the two sample systems, i.e., CeO2(111) thin films and CeO2 powders, and theoretical calculations of CeO2(111) surfaces with oxygen vacancies (Ov) at the surface and in the bulk. We show that, on a stoichiometric CeO2(111) surface, H2 dissociates and forms surface hydroxyls (OH). On the pre‐reduced CeO2−x samples, both films and powders, hydroxyls and hydrides (Ce−H) are formed on the surface as well as in the bulk, accompanied by the Ce3+ ↔ Ce4+ redox reaction. As the Ov concentration increases, hydroxyl is destabilized and hydride becomes more stable. Surface hydroxyl is more stable than bulk hydroxyl, whereas bulk hydride is more stable than surface hydride. The surface hydride formation is the kinetically favorable process at relatively low temperatures, and the resulting surface hydride may diffuse into the bulk region and be stabilized therein. At…

Continuous-flow multi-step synthesis takes the advantages of microchannel flow chemistry and may transform the conventional multi-step organic synthesis by using integrated synthetic systems. To realize the goal, however, innovative chemical methods and techniques are urgently required to meet the significant remaining challenges. In the past few years, by using green reactions, telescoped chemical design, and/or novel in-line separation techniques, major and rapid advancement has been made in this direction. This minireview summarizes the most recent reports (2017-2020) on continuous-flow synthesis of functional molecules. Notably, several complex active pharmaceutical ingredients (APIs) have been prepared by the continuous-flow approach. Key technologies to the successes and remaining challenges are discussed. These results exemplified the feasibility of using modern continuous-flow chemistry for complex synthetic targets, and bode well for the future development of integrated, automated artificial synthetic systems.

One of the most promising alternatives for treating bacterial infections is antimicrobial photodynamic therapy (aPDT), making the synthesis and application of new photoactive compounds called photosensitizers (PS) a dynamic research field. In this regard, phthalocyanine (Pc) derivatives offer great opportunities due to their extraordinary light-harvesting and tunable electronic properties, structural versatility, and stability. This Review, rather than focusing on synthetic strategies, intends to overview current progress in the structural design strategies for Pcs that could achieve effective photoinactivation of microorganisms. In addition, the Review provides a concise look into the recent developments and applications of nanocarrier-based Pc delivery systems.

The control over chemical reactivity and selectivity are always pursued. Using non-covalent interactions to achieve efficient and selective catalysis is an essential goal of supramolecular catalysis. Supramolecular catalysis based on cucurbit[n]urils (CB[n]s) possesses distinct characteristics for the unique structure of CB[n]s. CB[n]s are a family of pumpkin-shaped host molecules with various molecular sizes, rigid structures, electronegative portals and wealthy host-guest chemistry. Herein, we summarize the three major mechanisms of CB[n]s based supramolecular catalysis. Owing to the structural properties of CB[n]s, CB[n]s can serve as nanoreactors and steric hindrance to modulate the reactivity of substrates. They can also catalyze the reactions by modulating the reactivity of ionized intermediates. Recent progresses on the CB[n]s based supramolecular catalysis are introduced in this Minireview and the future development in this field is discussed. It is anticipated that this review provides insights into the mechanism of CB[n]s based supramolecular catalysis and may help…

Abstract Inverse vulcanization provides dynamic and responsive materials made from elemental sulfur and unsaturated cross‐linkers. These polymers have been used in a variety of applications such as energy storage, infrared optics, repairable materials, environmental remediation, and precision fertilizers. In spite of these advances, there is a need for methods to recycle and reprocess these polymers. In this study, polymers prepared by inverse vulcanization are shown to undergo reactive compression molding. In this process, the reactive interfaces of sulfur polymers are brought into contact by mechanical compression. Upon heating these molds at relatively low temperatures (≈100 °C), chemical bonding occurs at the polymer interfaces by S−S metathesis. This method of processing is distinct from previous studies on inverse vulcanization because the polymers examined in this study do not form a liquid phase when heated. Neither compression nor heating alone was sufficient to mold these polymers into new architectures, so this is a new concept in the manipulation of sulfur polymers.…

In the past few decades, conjugated polymers have aroused extensive interest in organic electronic applications. The electrical performance of conjugated polymers has a close relationship with their backbone conformation. The conformation of the polymer backbone strongly affects the πelectron delocalization along polymer chains, the energy band gap, interchain interactions, and further affects charge transport properties. To realize a rigid coplanar backbone that usually possesses efficient intrachain charge transport properties and enhanced π-π stackings, such conformation control becomes a useful strategy to achieve high-performance (semi)conducting polymers. This minireview summarizes the most important polymer structures through conformation control at the molecular level, and then divides these rigid coplanar conjugated polymers into three categories: 1) noncovalent interactions locked conjugated polymers; 2) double-bond linked conjugated polymers; 3) ladder conjugated polymers. The effect of the conformation control on physical nature, optoelectronic properties, and their…

The efficient and selective synthesis of functionalized seven-membered rings remains an important pursuit within synthetic organic chemistry, as this motif appears in numerous drug-like molecules and natural products. Use of cycloaddition reactions remains an attractive approach for their construction within the perspective of atom and step economy. Additionally, the ability to combine multiple components in a single reaction has the potential to allow for efficient combinatorial strategies of diversity-oriented synthesis. The inherent entropic penalty associated with achieving these transformations has impressively been overcome with development of catalysis, whereby the reaction components can be pre-organized through activation by transition-metal-catalysis. The fine-tuning of metal/ligand combinations as well as reaction conditions allows for achieving chemo-, regio-, diastereo- and enantioselectivity in these transformations. Herein, we discuss recent advances in transition-metal-catalyzed construction of seven-membered rings via combination of 2-4 components mediated by a…

Abstract Metal nanoclusters (NCs) have a particle size of about one nanometer, which makes them the smallest unit that can give a function to a substance. In addition, metal NCs possess physical and chemical properties that are different from those of the corresponding bulk metals. Metal NCs with such characteristics are expected to be important for use in nanotechnology. Research on the precise synthesis of metal NCs and elucidation of their physical/chemical properties and functions is being actively conducted. When metal NCs are alloyed, it is possible to obtain further various electronic and geometrical structures and functions. Thus, research on alloy NCs has become a hot topic in the study of metal NCs and the number of publications on alloy NCs has increased explosively in recent years. Such publications have provided much insight into the effects of alloying on the electronic structure and function of metal NCs. However, the rapid increase in knowledge has made it difficult for researchers (especially those new to the field) to grasp all of it. Therefore, in this review, we…

Electroactive organic molecules have received a lot of attention in the field of electronics because of their fascinating electronic properties, easy functionalization and potential low cost towards their implementation in electronic devices. In recent years, electroactive organic molecules have also emerged as promising building blocks for the design and construction of crystalline porous frameworks such as metal-organic frameworks (MOFs) and covalent-organic frameworks (COFs) for applications in electronics. Such porous materials present certain additional advantages such as, for example, an immense structural and functional versatility, combination of porosity with multiple electronic properties and the possibility of tuning their physical properties by post-synthetic modifications. In this Review, we summarize the main electroactive organic building blocks used in the past few years for the design and construction of functional porous materials (MOFs and COFs) for electronics with special emphasis on their electronic structure and function relationships. The different building…

Abstract Atomically thin sheets of two‐dimensional (2D) transition metal dichalcogenides (TMDs) have attracted interest as high capacity electrode materials for electrochemical energy storage devices owing to their unique properties (high surface area, high strength and modulus, faster ion diffusion, and so on), which arise from their layered morphology and diversified chemistry. Nevertheless, low electronic conductivity, poor cycling stability, large structural changes during metal‐ion insertion/extraction along with high cost of manufacture are challenges that require further research in order for TMDs to find use in commercial batteries and supercapacitors. Here, a systematic review of cutting‐edge research focused on TMD materials beyond the widely studied molybdenum disulfide or MoS 2 electrode is reported. Accordingly, a critical overview of the recent progress concerning synthesis methods, physicochemical and electrochemical properties is given. Trends and opportunities that may contribute to state‐of‐the‐art research are also discussed.

Abstract The first palladium organometallic compounds bearing N‐trifluoromethyl N‐heterocyclic carbenes have been synthesized. These η3‐allyl complexes are potent antiproliferative agents against different cancer lines (for the most part, IC50 values fall in the range 0.02–0.5 μm). By choosing 1,3,5‐triaza‐7‐phosphaadamantane (PTA) as co‐ligand, we can improve the selectivity toward tumor cells, whereas the introduction of 2‐methyl substituents generally reduces the antitumor activity slightly. A series of biochemical assays, aimed at defining the cellular targets of these palladium complexes, has shown that mitochondria are damaged before DNA, thus revealing a behavior substantially different from that of cisplatin and its derivatives. We assume that the specific mechanism of action of these organometallic compounds involves nucleophilic attack on the η3‐allyl fragment. The effectiveness of a representative complex, 4 c, was verified on ovarian cancer tumoroids derived from patients. The results are promising: unlike carboplatin, our compound turned out to be very active and showed…

The discovery of NHCs (NHC = N-heterocyclic carbenes) as ancillary ligands in transition-metal-catalysis ranks as one of the most important developments in synthesis and catalysis. It is now well-recognized that the strong σ-donating properties of NHCs along with the ease of scaffold modification and a steric shielding of the N-wingtip substituents around the metal center enable dramatic improvements in catalytic processes, including the discovery of reactions that are not possible using other ancillary ligands. In this context, although the classical NHCs based on imidazolylidene and imidazolinylidene ring systems are now well-established, recently tremendous progress has been made in the development and catalytic applications of BIAN-NHC (BIAN = bis(imino)acenaphthene) class of ligands. The enhanced reactivity of BIAN-NHCs is a direct result of the combination of electronic and steric properties that collectively allow for a major expansion of the scope of catalytic processes that can be accomplished using NHCs. BIAN-NHC ligands take advantage of (1) the stronger σ-donation, (2)…

The increasing demand for high-performance rechargeable energy storage systems has stimulated the exploration of advanced electrode materials. MXenes are a class of two-dimensional (2D) inorganic transition metal carbides/nitrides, which are promising candidates in electrodes. The layered structure facilitates ion insertion/extraction, which offers promising electrochemical characteristics for electrochemical energy storage. However, the low capacity accompanied by sluggish electrochemical kinetics of electrodes as well as interlayer restacking and collapse significantly impede their practical applications. Recently, interlayer space engineering of MXenes by different chemical strategies have been widely investigated in designing functional materials for various applications. In this review, an overview of the most recent progress of 2D MXenes engineering by intercalation, surface modification as well as heterostructures design is provided. Moreover, some critical challenges in future research on MXene-based electrodes have been also proposed.

Sequential, domino and tandem reactions could be defined as a sequence of synthetic transformations that occur one after the other, in the same reaction flask. This Review highlights recent advances at the overlap of two worlds: transition-metal mediated C-H activation as a trigger of cascade reaction, for the heterocycles synthesis. To shed some light on this intricate "middle-earth", focus was put on the reaction mechanism rather than the type of metal or the chronological order of the reaction. The aim is to separate, and then highlight, the true domino reactions initiated by C-H activation, compared to other examples of C-H functionalization for heterocycle syntheses.

Abstract Three‐coordinate cationic bismuth compounds [Bi(diaryl)(EPMe 3 )][SbF 6 ] have been isolated and fully characterized (diaryl=[(C 6 H 4 ) 2 C 2 H 2 ] 2− , E=S, Se). They represent rare examples of molecular complexes with Bi⋅⋅⋅EPR 3 interactions (R=monoanionic substituent). The 31 P NMR chemical shift of EPMe 3 has been found to be sensitive to the formation of LA⋅⋅⋅EPMe 3 Lewis acid/base interactions (LA=Lewis acid). This corresponds to a modification of the Gutmann–Beckett method and reveals information about the hardness/softness of the Lewis acid under investigation. A series of organobismuth compounds, bismuth halides, and cationic bismuth species have been investigated with this approach and compared to traditional group 13 and cationic group 14 Lewis acids. Especially cationic bismuth species have been shown to be potent soft Lewis acids that may prefer Lewis pair formation with a soft (S/Se‐based) rather than a hard (O/N‐based) donor. Analytical techniques applied in this work include (heteronuclear) NMR spectroscopy, single‐crystal X‐ray diffraction analysis, and…

Abstract During the past few decades, there has been considerable growth in the development of denitrogenative reactions of triazole skeletons to construct valuable cyclic compounds, particularly heterocycles. Despite the inherent difficulty of the ring‐opening of triazole derivatives, many novel and efficient approaches have arisen in this area mainly with the use of transition metal (such as rhodium, palladium, silver, copper) catalysis, photolysis, or free radical mediated reactions. Generally, these procedures begin with the ring‐opening of 1,2,3‐triazoles or benzotriazoles followed by N 2 extrusion and subsequent diverse transformations, which enable the rapid synthesis of various heterocycles in a single step. To avoid overlap with other related reviews, this minireview covers the recent advances in the denitrogenative cyclization of 1,2,3‐triazoles since 2016 and the denitrogenative cyclization of benzotriazoles since 2012.

Isoindolinone structure is an important privileged scaffold found in a large variety of naturally occurring as well as synthetic, biologically and pharmaceutically active compounds. Owing to its crucial role in a number of applications, the synthetic methodologies for accessing this heterocyclic skeleton have received significant attention during the past decade. In general, the synthetic strategies can be divided into two categories: First, direct utilization of phthalimides or phthalimidines as starting materials for the synthesis of isoindolinones; and second, construction of the lactam and/or aromatic rings by different catalytic methods, including C-H activation, cross-coupling, carbonylation, condensation, addition and formal cycloaddition reactions. Especially in the last mentioned, utilization of transition metal catalysts provides access to a broad range of substituted isoindolinones. Herein, the recent advances (2010-2020) in transition metal catalyzed synthetic methodologies via formation of new C-C bonds for isoindolinones are reviewed.

During the last decade, there has been a tremendous interest for developing non-natural biocompatible transformations in biologically relevant media. Among the different encountered strategies, the use of transition metal complexes offers unique possibilities due to their high transformative power. However, translating the potential of metal catalysts to biological settings, including living cells or small-animal models such as mice or zebrafish, poses numerous challenges associated to their biocompatibility, and their stability and reactivity in crowded aqueous environments. Herein, we describe the most relevant advances in this direction, with a particular emphasis on the systems' structure, their mode of action and the mechanistic bases of each transformation. Thus, the key challenges from an organometallic perspective might be more easily identified.

Gold complexes have a long tradition in medicine and for many examples antirheumatic, anticancer or anti-infective effects have been confirmed. Herein, we evaluated the lead compound Auranofin and five selected gold organometallics as inhibitors of two relevant drug targets of severe acute respiratory syndrome coronaviruses (SARS-CoV). The gold metallodrugs were effective inhibitors of the interaction of the SARS-CoV-2 spike protein with the angiotensin converting enzyme 2 (ACE2) host receptor and might thus interfere with the viral entry process. The gold metallodrugs were also efficient inhibitors of the papain-like protease (PLpro) of SARS-CoV-1 and SARS-CoV-2, which is a key enzyme in the viral replication. Regarding PLpro from SARS-CoV-2, the here reported inhibitors are among the very first experimentally confirmed examples with activity against this target enzyme. Importantly, the activity of the complexes against both PLpro enzymes correlated with the ability of the inhibitors to remove zinc ions from the labile zinc center of the enzyme. Taken together, the results of this…

Abstract [M(NH 3 ) 4 ]A (M=Pt, Pd; A=CrO 4 , Cr 2 O 7 ) and [Pt(NH 3 ) 4 (NO 2 )(Cr 2 O 7 )]NO 3 complex salts were synthesized and characterized by a number of physicochemical methods of analysis (IR, single‐crystal and powder XRD, and simultaneous thermogravimetry and differential scanning calorimetry with evolved gas analysis mass spectrometry). Thermolysis of the salts obtained in a hydrogen atmosphere proceeds with the partial reduction of chromium to a metallic state and the formation of M x Cr 1− x (M=Pt, Pd) metal solid solution with a chromium content of up to 22 at % and chromium(III) oxide. The thermal decomposition of salts in an inert and oxidizing atmosphere passes through the formation stage of the MCrO 2 phase with the delafossite structure followed by its subsequent decomposition into chromium(III) oxide and noble metal. Nanosized Pt−Cr 2 O 3 and Pd−Cr 2 O 3 composites obtained by the thermolysis of precursor salts in air at 500 °C and being held at this temperature for 1 h showed a high catalytic activity in the CO total oxidation (TOX) and preferential oxidation…

As a hot topic of global concern, the distinguishing and detecting of antibiotic pollution is crucial owing to its adverse effect on ecosystems and human health stemming from excessive use and poor management. Herein, a water-stable lanthanide coordination polymer sensor (Dy-TCPB) with multiple emitting centers is prepared. The versatile Dy-TCPB can conveniently differentiate various antibiotics, and displays a self-calibration luminescent response to nitrofurazone (NFZ) and furazolidone (FZD). Each antibiotic exhibits notable correlation to a unique combination of the two ligand-to-Dy ion emission intensity ratios, enabling two-dimensional fingerprint recognition. Furthermore, the novel self-calibration sensor demonstrates effective recognition of NFZ and FZD with excellent sensitivity and selectivity, and detection limits as low as 0.0476 and 0.0482 μm for NFZ and FZD, respectively. The synthetic approach for the fabrication of a singular coordination polymer exhibiting multiple emissions provides a promising strategy for the development of facile and effective ratiometric sensors.

Mechanically interlocked molecules (MIMs) have gained attention in the field of catalysis due to their unique molecular properties. Central to MIMs, rotaxanes are highly promising and attractive supramolecular catalysts due to their unique three-dimensional structures and the flexibility of their subcomponents. This Minireview discusses the use of rotaxanes in organocatalysis and transition-metal catalysis.

Abstract Acetylene (C2H2) capture is a step in a number of industrial processes, but it comes with a high‐energy footprint. Although physisorbents have the potential to reduce this energy footprint, they are handicapped by generally poor selectivity versus other relevant gases, such as CO2 and C2H4. In the case of CO2, the respective physicochemical properties are so similar that traditional physisorbents, such as zeolites, silica, and activated carbons cannot differentiate well between CO2 and C2H2. Herein, we report that a family of three isostructural, ultramicroporous (<7 Å) diamondoid metal–organic frameworks, [Cu(TMBP)X] (TMBP=3,3′,5,5′‐tetramethyl‐4,4′‐bipyrazole), TCuX (X=Cl, Br, I), offer new benchmark C2H2/CO2 separation selectivity at ambient temperature and pressure. We attribute this performance to a new type of strong binding site for C2H2. Specifically, halogen⋅⋅⋅HC interactions coupled with other noncovalent in a tight binding site is C2H2 specific versus CO2. The binding site is distinct from those found in previous benchmark sorbents, which are based on open metal…

Transition-metal-catalyzed C-H functionalization and photoredox nickel dual catalysis have emerged as innovative and powerful avenues for the synthesis of C-branched glycosides. These two concepts have been recently established and provide efficient and mild methods for accessing a series of valuable complex C-branched glycosides of great interest. Herein, recent developments in the synthesis of C-branched aryl/alkenyl/alkyl glycosides through these two approaches are highlighted.

Chemodivergent cross-couplings are those in which either one of two (or more) potentially reactive functional groups can be made to react based on choice of conditions. In particular, this review focuses on cross-couplings involving two different (pseudo)halides that can compete for the role of the electrophilic coupling partner. The discussion is primarily organized by pairs of electrophiles including chloride vs. triflate, bromide vs. triflate, chloride vs. tosylate, and halide vs. halide. Some common themes emerge regarding the origin of selectivity control. These include catalyst ligation state and solvent polarity or coordinating ability. However, in many cases, further systematic studies will be necessary to deconvolute the influences of metal identity, ligand, solvent, additives, nucleophilic coupling partner, and other factors on chemoselectivity.

Highly efficient reactions that enable the assembly of molecules into complex structures have driven extensive progress in synthetic chemistry. In particular, reactions that occur under mild conditions and in benign solvents, while producing no by-products and rapidly reach completion are attracting significant attention. Amongst these, the strain-promoted azide-alkyne cycloaddition, involving various cyclooctyne derivatives reacting with azide-bearing molecules, has gained extensive popularity in organic synthesis and bioorthogonal chemistry. This reaction has also recently gained momentum in polymer chemistry, where it has been used to decorate, link, crosslink, and even prepare polymer chains. This survey highlights key achievements in the use of this reaction to produce a variety of polymeric constructs for disparate applications.

Glycans are well established to play important roles at various stages of infection and disease, and ways to modulate these interactions have been sought as novel therapies. The use of native glycan structures has met with limited success, which can be attributed to their characteristic high polarity (e.g., low binding affinities) and inherently poor pharmacokinetic properties (e.g., short drug-target residence times, rapid renal excretion), leading to the development of 'glycomimetics'. Fluorinated drugs have become increasingly common over recent decades, with fluorinated glycomimetics offering some unique advantages. Deoxyfluorination maintains certain electrostatic interactions, while concomitantly reducing net polarity through 'polar hydrophobicity', improving residence times and binding affinities. Fluorination destabilizes the oxocarbenium transition state associated with metabolic degradation, and can restore exo- and endo-anomeric effects in C-glycosides and carbasugars. Lastly, it has shown great utility in radiotracer development and enhancement of antigenicity in…

The Coronavirus disease 2019 (COVID-19) emergency has demonstrated that the utilization of face masks plays a critical role in limiting the outbreak. Healthcare professionals utilize masks all day long without replacing them very frequently, thus representing a source of cross-infection for patients and themselves. Nanotechnology is a powerful tool with the capability to produce nanomaterials with unique physicochemical and antipathogen properties. Here, how to realize non-disposable and highly comfortable respirators with light-triggered self-disinfection ability by bridging bioactive nanofiber properties and stimuli-responsive nanomaterials is outlined. The visionary road highlighted in this Concept is based on the possibility of developing a new generation of masks based on multifunctional membranes where the presence of nanoclusters and plasmonic nanoparticles arranged in a hierarchical structure enables the realization of a chemically driven and on-demand antipathogen activities. Multilayer electrospun membranes have the ability to dissipate humidity present within the mask,…

With the strengths of zero carbon emission and high gravimetric energy density, hydrogen energy is recognized as a primary choice for future energy supply. Electrochemical water splitting provides a promising strategy for effective and sustainable hydrogen production through renewable electricity, and one of the immediate challenges toward its large-scale application is the availability of low-cost and efficient electrocatalysts for the hydrogen evolution reaction (HER). Given the enormous efforts in the exploration of potential transition-metal carbide (TMC) electrocatalysts, this review aims to summarize the recent advances in synthetic methods and optimization strategies of TMC electrocatalysts. Additionally, the perspectives for the development of novel efficient TMC-based catalysts are also proposed.

Maleimides are essential compounds for drug conjugation reactions via thiols to antibodies, peptides and other targeting units. However, one main drawback is the occurrence of thiol exchange reactions with, for example, glutathione resulting in loss of the targeting ability. A new strategy to overcome such retro-Michael exchange processes of maleimide-thiol conjugates by stabilization of the thiosuccinimide via a transcyclization reaction is presented. This reaction enables the straightforward synthesis of stable maleimide-thiol adducts essential in drug-conjugation applications.

This review summarises known sesquiterpenes whose biosyntheses proceed through the intermediate germacrene A. First, the occurrence and biosynthesis of germacrene A in Nature and its peculiar chemistry will be highlighted, followed by a discussion of 6-6 and 5-7 bicyclic compounds and their more complex derivatives. For each compound the absolute configuration, if it is known, and the reasoning for its assignment is presented.

A series of substituted azothiophenes was prepared and investigated toward their isomerization behavior. Compared to azobenzene (AB), the presented compounds showed red-shifted absorption and almost quantitative photoisomerization to their (Z) states. Furthermore, it was found that electron-withdrawing substitution on the phenyl moiety increases, while electron-donating substitution decreases the thermal half-lives of the (Z)-isomers due to higher or lower stabilization by a lone pair-π interaction. Additionally, computational analysis of the isomerization revealed that a pure singlet state transition state is unlikely in azothiophenes. A pathway via intersystem crossing to a triplet energy surface of lower energy than the singlet surface provided a better fit with experimental data of the (Z)→(E) isomerization. The insights gained in this study provide the necessary guidelines to design effective thiophenylazo-photoswitches for applications in photopharmacology, material sciences, or solar energy harvesting applications.

Abstract A new persistent organic free radical has been synthetized with Br atoms occupying the ortho ‐ and para ‐positions of a trityl core. After the isolation of its two propeller‐like atropisomers, Plus ( P) and minus ( M ), their absolute configurations were assigned by a combination of theoretical and experimental data. Remarkably, no hints of racemization were observed up to 60 °C for more than two hours, due to the higher steric hindrance imposed by the bulky Br atoms. Therefore, when compared to its chlorinated homologue ( t 1/2 =18 s at 60 °C), an outstanding stability against racemization was achieved. A circularly polarized luminescence (CPL) response of both enantiomers was detected. This free radical shows a satisfactory luminescent dissymmetry factor (|g lum (592 nm)|≈0.7×10 −3 ) despite its pure organic nature and low luminescence quantum yield (LQY). Improved organic magnetic CPL emitters derived from the reported structure can be envisaged thanks to the wide possibilities that Br atoms at para ‐positions offer for further functionalization.

Noyori-Ikariya-type ruthenium(II)-catalysts for asymmetric transfer hydrogenation (ATH) have been known for 25 years and have proved as a well-behaved and user-friendly platform for the synthesis of chiral secondary alcohols. A progress has been made in the past five years in understanding the asymmetric reduction of complex ketones, where up to four stereocenters can be controlled in a single chemical transformation. Intriguing multi-chiral molecular architectures are therefore available in few well understood and robust synthetic steps from commercially available building blocks and possess handles for additional functionalization. The aim of this Review is to showcase the availability of three-dimensional scaffolds and homochiral lead-like compounds via ATH and inspire their direct use in drug discovery endeavors. Basic mechanistic insights are provided to demystify the stereo-chemical outcomes, as well as examples of diastereoselective transformations of enantiopure alcohols to give a feeling of how these rigid non-planar molecules can be further elaborated.

Owing to their permanent porosity, highly ordered and extended structure, good chemical stability, and tunability, covalent organic frameworks (COFs) have emerged as a new type of organic materials that can offer various applications in different fields. Benefiting from the huge database of organic reactions, the required functionality of COFs can be readily achieved by modification of the corresponding organic functional groups on either polymerizable monomers or established COF frameworks. This striking feature allows homochiral covalent organic frameworks (HCCOFs) to be reasonably designed and synthesized, as well as their use as a unique platform to fabricate asymmetric catalysts. This contribution provides an overview of new progress in HCCOF-based asymmetric catalysis, including design, synthesis, and their application in asymmetric organic synthesis. Moreover, major challenges and developing trends in this field are also discussed. It is anticipated that this review article will provide some new insights into HCCOFs for heterogeneous asymmetric catalysis and help to encourage…

Abstract Salinomycin (1) exhibits a large spectrum of biological activities including the capacity to selectively eradicate cancer stem cells (CSC), making it and its derivatives promising candidates for the development of drug leads against CSC. It has been previously shown that salinomycin and its C20‐propargylamine derivative (Ironomycin (2)) accumulate in lysosomes and sequester iron in this organelle. Herein, a library of salinomycin derivatives is reported, including products of C20‐amination, C1‐esterification, C9‐oxidation, and C28‐dehydration. The biological activity of these compounds is evaluated against transformed human mammary epithelial HMLER CD24low/CD44high cells, a well‐established model of breast CSC, and HMLER CD24high/CD44low cells deprived of CSC properties. Unlike other structural alterations, derivative 4, which displays a cyclopropylamine at position C20, showed a strikingly low IC50 value of 23 nm against HMLER CD24low/CD44high cells. This study provides highly selective molecules to target the CSC niche, a potential interesting advance for drug development…

Abstract Diethyl 2,6‐dimethyl‐1,4‐dihydropyridine‐3,5‐dicarboxylate (HEH) has been utilized as a visible‐light photoredox catalyst for the cross coupling of arylhalides and arylsulfinates without transition metal, sacrificial agent, and mediator. This method is compatible with various functional groups and provides diaryl sulfones in good to high yields. Mechanistic studies indicate that this reaction undergoes the stepwise light irradiation of HE−, single electron transfer (SET) in donor–acceptor complex (DAC) from *HE− to arylhalide, trapping of aryl radical with sulfinate, and SET oxidation of sulfone radical anion by HE. to sulfone by the DAC method.

Abstract To obtain a highly active, stable, and binder‐free electrode based on transition‐metal compounds for water splitting, nickel foam‐supported 3D NiMoO4 nanosheet arrays modified with 0D Fe‐doped carbon quantum dots (Fe‐CQDs/NiMoO4/NF) are synthesized. The structure characterizations indicated that 0D Fe‐CQDs are evenly dispersed onto the NiMoO4 sheets of the arrays. The contact angle analysis confirmed that the surface hydrophilia of the arrays is improved after the 0D Fe‐CQDs are deposited 3D on the NiMoO4 sheets. Here, both the activity and durability in electrochemical water splitting are significantly enhanced with the Fe‐CQDs/NiMoO4/NF catalysts. At a current density of 10 mA cm−2, the resultant Fe‐CQDs/NiMoO4/NF revealed an overpotential of only 117 mV for the hydrogen evolution reaction (HER), a relatively low overpotential of 336 mV toward the oxygen evolution reaction (OER), and a Faraday efficiency of up to 99 %. This performance can be attributed to the unique 3D nanosheet array structure, the synergistic effect, and the optimal hydrophilia for gas evolution…

Thanks to the potential of aggregation-induced emission (AIE) phenomena, improved stabilities, and the good selectivity and sensitivity of the chemical responses exhibited by the products, coordination-driven self-assembly with tetraphenylethylene (TPE) units has recently received much attention and has been widely investigated for application in chemical sensors, cell imaging agents, light-harvesting systems, and others. Several reviews have emerged on the topics of AIE chemistry and aggregation-induced emission luminogen (AIEgen)-based supramolecular assembles, however, there is still a distinct lack of full overviews of emission enhancement from the viewpoint of metal-coordination effects. Thus, this minireview offers recent advances that have been made in the design and application of TPE-based metallacycles, metallacages, metal-organic frameworks (MOFs) and coordination polymers (CPs).